6G Stick Welding Test | Open Root 6010 & 7018

6G stick welding test open root with Welding Flyduck. 6010 root pass and hot pass followed by the fills and cap with 7018. Todays video also includes the fit-up. A good weld starts with a good fit check it out!
#WeldTube #WeldLife #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en

[@weldtube]

👇WeldTube Store👇 www.weldlife.com

[@christopherespeleta8465]

Sir from morning till afernoon what do you do before start to work and what are all the tiols and equipment u use thanks

[@user-wd5pm8zm9o]

⁴⁵

[@franciscohernandez6155]

excellent video friend, your glasses look great, could you tell me the name of the brand of your glasses, greetings from Mexico brother

[@isaacjudaszichire449]

Hi I liked and am interested to get more experience

[@primoflores8304]

I'd like to work there in the usa.

[@VeritasEIREAequitas]

“Key to a good weld, is a good fit”. Such an understatement

[@TimeSurfer206]

As an Electrician who has also dabbled in Painting and Finish Carpentry, on a professional level, the 80/20 Rule applies: 80% of the work is preparing for the work.

[@VeritasEIREAequitas]

@@TimeSurfer206 very well said

[@wolfoftime1405]

Can't forget to take your time and get comfortable

[@VeritasEIREAequitas]

@@wolfoftime1405 💯

[@weldwizard]

How do you mean? I concur with him

[@davidcalhoun7202]

I finally passed my 6G welding test, thank you for this video.

[@tom-vs3lf]

Hard to believe when I went to welding school in 1973 that we learned how to weld pipe by putting a 6010 root pass in and low hydrogen the rest of the way isn't it unreal that things are still done the same way 50 years later. What if your doctor or dentist did things exactly the same way they did 50 years ago

[@mmanshuu3259]

kzbin.info/www/bejne/lae6mYKJq62Zn8k pipeline

[@pocatefo1]

Debe tener mucho conocimiento valioso 👏 alguno de su familia siguió sus pasos?

[@elliottgarcia3658]

Hey, you know what? That is a very intriguing way to put it. Two different vocation but that still any interesting perspective, never really looked at it like that...

[@jacobb.4113]

@@elliottgarcia3658 i agree ive never looked at it like that

[@boricuaarecibo9259]

Same process new welder technology Microprocessor and inverters make welders lighter and more portable

[@erikbruce5141]

Well done and well explained.. I am a retired welder and the hardest thing is teaching noobies to relax and go with the flow.Cheers!

[@joakimolsson3137]

as a license welder i can say this one's really well explained so for anyone who's watching to learn (and not just cuz they're a heckin nerd like me) this is how to weld pipe on a license level. good job @WeldTube

[@moseskongi4746]

What the f ck is a "licensed welder"? That's like someone saying they're a licensed dishwasher. You must be in europe or asstralia or somewhere like that.

[@Azerx997]

@@moseskongi4746 Certified Welder

[@moseskongi4746]

@@Azerx997 I always thought a "license" is different from a cert.

[@cesarmanzano9639]

Since when does a license/cert mean someone can weld?

[@jullejapp4895]

@@cesarmanzano9639 u must have license in Sweden to weld at work

[@setnbronco4932]

good description of what you are doing while actually welding and good arc shots. Nice job

[@Solorivera]

Best 6g video demo that I’ve seen. Great job thank you.

[@44_83]

lmao

[@eduffy4937]

80% of total proccess time is setup, resulting in 20% welding time under the hood. If you rush setup to 20% of total proccess time, expect total time under the hood to grow to 80% with 20% quality.

[@suburbanbiology]

Your welding sure reminds me that I'm an amateur. Thanks for the in-depth description!

[@ianlaker6980]

I've been welding for 40 years started with Gas welding then Arc with original Fleetweld 5s Great video. Used bridge sections rather than tacks just knock them off as you go round.

[@deltathunderfalcon8512]

Thank Rosendo! You the man! I’m signed up to go the boot camp training for the boilermaker union next month, I’m not sure what to expect but these videos are definitely helping me grease the gears as I practice back at my local tech school. Much love brotha 🍻

[@brandonstrickland6444]

You mean apprenticeship class? If it's the way they did it when I went it'll be 2 weeks classroom, 1 week shop. 6-10s

[@deltathunderfalcon8512]

@@brandonstrickland6444 no not all. It was 3 weeks 6 10s, all shop. and constantly and I mean CONSTANTLY burning rod. I think I was going through about 5 pounds a day. They were very thorough, and professional with all the training. I walked out with two certifications, SMAW and FCAW.

[@dolphincliffs8864]

I recieved a false welding education from St Cloud Technical Community College. This channel has taught me way more about technique,fit up and everything else . Thank you guys!

[@HTX.Jose28]

Same here I'm currently going to Houston community college and my instructor sucks. I've learned more from watching KZbin videos.

[@vo3751]

Same here, attended Southern Careers Institute-San Antonio 😅

[@Austie420]

awesome stuff im heading into a Boilers apprentice rogram in a few weeks and im new to 6g so watching this helped me learn the movements of the ody to keep the rod in the center of the pipe as im working along, ive got my 6010 stiching down pretty good but need to work on that fill and cap

[@kurtmiller8773]

I love how you get straight to the point great vid gonna sub

[@hirammartinez952]

Thank you buddy for your time I am taking some classes on welding at the moment to learn this look forward to it hopefully is a good pay as well as it’s fun as it is I hope I run into old-school welders to learn the old-school stuff as well I believe it’s always good to learn from the old to the new School 🙏👍🏼👍🏼up

[@JacobYamba-rq5tt]

This is an awesome demonstration in how to weld pipes being a welding instructor give you 💯

[@daveallsopp320]

Pipe welding is a real art👍🏽👍🏽👍🏽

[@scottysutherland3568]

Great video! Excellent job explaining everything strp by step to help a student in need 👏👍

[@jeremywatterson9594]

Great job and demonstration as always Rosendo!

[@jlssculpturedesign8140]

That's a great tutorial on the 6G weld test.

[@dennisgray7509]

I’m learning from your videos. Great content

[@johnvonmartin7501]

Seeing him weave both left and right still in steady mode left me speechless.

[@thaddeusgoodsonfamous8494]

Nice one bro, you really pulled it off smoothly. Got a text next week for a job. Your tips were helpful. Thanks for sharing

[@WELDERMADEHEADBANDS]

Great video Rosendo , excellent explanation and technique 💯

[@shirleyblanchett607]

The best 6g pipe video I've ever seen on here. 33 years exp

[@sandymacniven2872]

Great explanation as always and fabulous job

[@jimsturwold5424]

One of my favorite welds!

[@bernardedyvean7436]

Awesome way this explained the welding. I started welding at age 4, at my grandfather's shop. But the newer welders use tigg welding to do the first pass. Id trusted this guys welding over the tigg. Tigg is like welding with and Oxygen an Asetalin.

[@shannonsayazie1652]

Oh man I love castle rentals and knowing your products are there sweet! I’m like a kid in a candy shop everytime I go there

[@aliroc53]

excelente demostración, muy claro ahora llevar a la practica. saludos desde Chile .

[@mattarnold4071]

Rosendo bringing that 🔥🔥🔥! Nice work brother!!! 💪

[@weldtube]

🤟

[@ashleyvan1300]

Great job explaining 👏 Thank you 🤘

[@user-pi5kd8vi9r]

I learned a lot thank you for the uploader

[@jcarrillo659]

This guy explains things very well, it would've been cool to have him as an instructor when I was there. Apart from the one and only Abraham.

[@chrism8850]

I remember as an apprentice being told to just watch and learn. Some really good welders aren't good at teaching, or explaining what they do. This is great though, really good video.

[@marcelinosamelojr.n9584]

Thank you sir to share you tichniques. Now, im already NCll holder.. godbless sir

[@ninesixteengenetix]

Old-School Pipefitter/Boilermakers taught me to use about a 24" pipe wrench off the face of the outer side of pipe for your arm rest or tie your lead around the pipe for an armrest, even use a pipe stand. 6G Certified and X-Ray quality

[@kaisanimmortal]

OMG THANK YOU SO MUCH FOR THIS COMMENT. Definitely gonna use this trick. 👌👌👌

[@MrYoBeVlog]

very helpful for newbies like us thank you

[@genreaper]

Great video, thanks for your time.

[@hamisindabagoye7724]

I'm still learning about welding,cookie from 🇹🇿🇹🇿

[@jan4751]

Well done, greetings from the Netherlands

[@LadyLaDama]

I have certs but none for pipe welding, now I'm fortunate enough to be learning on the job and trying to learn a lil extra on downtime.👩‍🏭

[@nitrix3353]

I’m tryna learn rn too

[@paulmattox]

when its sizzling you know its going in . iv not done stick welding in about 10 years and used to find it easy doing pipe. i started a new job February and got to do a 6g stick and 6g Tig weld test. im not looking forward to it haha. nice video

[@autodidacticartisan]

If youre ten years rusty, your screwed. Ant chance you can get a couple practice runs?

[@volodymyrmalynov4249]

Good job man, thanks for sharing 👍

[@FrankOlivares-ns7mv]

Thank you so much, I appreciate it

[@nicholugrim1108]

should have watch this before my assessment. from PH

[@FrankOwusu-dw6ri]

Thanks

[@aminbaloch3998]

helpful video about 6G thanks bro 😉👍

[@elky1883]

Great show ...im 65 welded all my life nowi realise ehy my neck hurts so much all the crazy positions and not moving or breathing till rod down lol

[@keenanepps2543]

I like your videos breh big ups, the key is to reading that puddle i made it so hard ar first wish I was looking at your videos while I was trying to get it Burn to learn And you will eventually earn

[@paulmarriott3885]

Very helpful thank you

[@adilsonrodrigues4316]

Show essa solda. Parabéns

[@vendetta1306]

Much obliged friend

[@leomongiello4714]

finally a 6g stick video

[@j.d.m.6512]

Saludos mi chingon excelente clase saludos desde Chicago il👍🇲🇽

[@JoseLara-io2uv]

I wish I knew some of these techniques I would’ve done well on my test

[@saqibmughal3360]

great i understand also this weldeing .great job.🤗

[@jeepwk6.5L]

I’ve NEVER had lof with only grinding one side of the tack. If you leave a keyhole you can come back off the keyhole… the tie in coming into a tack is the critical part to grind.

[@felipeguerrero2783]

Beautiful well explained 👏👏👏

[@erikmason181]

I’m right handed and actually do well on that side I kinda struggle with my left side pipe but I learned to use my left hand

[@gorillaselchongchonggo]

Nice dude's new subscriber here from Philippines 😊💪

[@junildoparanhos]

Ainda vou aprender fazer assim. Perfeito

[@karyabaruteknik2022]

terima kasih.. thanks for yours video..👋

[@scottmatusek2691]

I remember taking my test with a 2" pipe in 6g , pain in the butt, that 6" pipe so much easier to do.

[@chief5981]

Did u take the UA VIP career course?

[@gopakumargopakumar4361]

Very helpful sir this videos thanks

[@quinnmixtv6851]

Thank you for sharing this video

[@weldtechsolutions]

Good job mate

[@melchormansueto1157]

Gd day sir i like that your welding procedure im also a welder combination

[@Broski2322]

Prep is everything

[@luisgeremiasantanamateo794]

Geremia . I"m from D.R. Like the welding very mucho.ok My friend.

[@ramoncastillo8885]

Gracias colegas !!!!👍👍👍👍

[@jsmith8459]

Quick question if your beading with a 6010 why are you doing an uphill bead is it bcuz the 7018 fill and cap. Thanks

[@jamesssewanyana7684]

Great job bro

[@monterosraymond924]

Awesome thanks

[@nathkrupa3463]

Purfect showed pipe welding skills thanks sir. Sir welding machine running hours continuously or not ?

[@whitneyshelton8600]

If you have slag stuck in the top of the 6010 weld will it show up on the test or will the 7018 burn it out?

[@crizeldumolas7760]

Still amazing sir how to be you i love that kind of work!! 😊😊😊😊🙏

[@jseadog1394]

Great instruction! I find myself watching these videos like a 16 year old gets sucked into tiktok. So, on a 6G it looks like I need to manipulate my wrist while maintaining the relative same travel and work angle? Gonna be tough, but I'm up for it. Thanks again!

[@doctorsleep3414]

Una pasada este canal y grandes soldadores auntenticos pros carayo

[@user-jm3uw9gg1z]

Good job 👍

[@MathewGarofalo]

Just finished this at school. I liked 1/8 land with a zipped thru root opening. Straight drag root pass. Cap is the hardest part of this test

[@djwill1481]

Did u have 3/32 gap?

[@kentadriano8682]

im a welder student here in philipines. hi to all welders out here,

[@peterobrikogho8112]

Good job brother keep it up 💪💪

[@imnohble5214]

Was the 6010 a 3/32 rod?? I’m doing a pipe welding course rn and we use 3/32 6010 with a 3/32 gap, 3/32 landing but my instructor likes running it at 55amps. I find that that’s too cold for me so I jumpit up to 65-70 depending on how bad the fitment is. Obviously the bigger the landing the more heat you’re gonna need but I might just try the 1/8th landing and 80 Amps if that’s what he’s using

[@SIMON_WELDER]

Exelente trabajo 💪😎

[@JoseFranco-lp9qi]

Buena enseñanza Me encanta la soldadura

[@maythemilsaballero9642]

Awesome well explained. ❤

[@jammyb90]

👍👍 Excellent!

[@ricardogutierrez1840]

Thanks for sharing

[@anitaackahmiezah571]

Very fantastic 👍👍

[@LilFish0]

Amazing

[@dangerzone6023]

what should be the maximum root gap in pipe welding

[@Charlestongame]

So after the 2 fillers did he do first cap 2 bead stack? And 2nd cap 3 bead stack?

[@chriszaragoza4516]

Can someone explain the 6010 hot pass? I’ve been taught that is a strict no. For us it is always 6010 root and 7018 all the way out after root

[@billmoore1936]

Yes and when you can weld a G6 you can weld is one of the hardest test pieces there is

[@lianrevlis]

When I welded my ASME 6-G test it was 6010 root, 3/32 7018 hot pass and fill and cap with 1/8 7018. It would have been much easier with 3/32 7018 all the way.

[@Gallito_23]

What is the recommended arc control & hot start for a 6g stick on pipe test

[@ryanbeard1119]

Were you javing a problem w the keyhole opening up way too much, is metal suposed to flow around it?. Can you do videos on how the tie ins are done in the feild. doesnt the pipe welder have to appriove if its good enough

[@jamesnkanta4841]

Nice weld beed👍👍