How to : Mimaki UCJV 300 print and cut part 2

Рет қаралды 28,587

Күн бұрын

Пікірлер: 24

@rebelgraphics5856 4 жыл бұрын

The knowledge acquired surpassed the background noise and bad camera angles. Great info and was able to setup my print-cut workflow properly

@shaunmcinnis1960 4 жыл бұрын

Just want to thank you again for taking the time to make these video's. They are worth their weight in gold.

@Olcaylmz85 2 жыл бұрын

Thanks for this video, it helps me a lot. Especially the info with Half Cut.

@jonadoom123 5 жыл бұрын

Part 3 coming anytime?? Really helpful information. Thank you.

@pdsequipment 4 жыл бұрын

Hello, Part 3 is up. LEt me know if you have any questions

@thademigod 3 жыл бұрын

This is kicking my Arse. Machine cut great for the first month. Now i can't die cut worth a hoot. Kiss cut works fine but it bangs really loud when it "cuts" I set the blade depth exactly like you did, I'm all the way up to 450 and I can't cut through the backer and Vinyl at all. (4 mm ) I basically have to turn the blade manually down a little more to get it to try and cut through then I get jagged edge problems. Replaced the cutting stick too. I don't even cut much. About to just buy an offline cutter because of the time I waste trying to get this thing to die cut. I dread people asking for contour cut because I can't get this thing to work correctly. New blades, new stick, what am I missing here?

@hasnenalaashihab4364 4 жыл бұрын

GOOD JOB ...

@K3NnY_G Жыл бұрын

I'm having this issue where I set my perf cut just right with the test cut, do a job and the top right of any cut doesn't come out clean, rest of everything is perfect, then as I approach the left side of the platen the cut pressures seem even more off...

@simonriggs 8 ай бұрын

are you using the pen line rubber or sponge when when doing the cuts? I only have the penline rubber

@qinghillstudio Жыл бұрын

Thank you Sir!

@daneinaremiljeppesen7140 3 жыл бұрын

white print on blue foil with cutout, how do you do what I have tried but it can not find the marks? I have a UCJV300 series

@JersePhantom 4 жыл бұрын

I have been trying to do this for 5 years, thank you for your help, !!! now,,,, can you do this thru fine cut??? i tried and was able to but i did it by mistake. i notice if i send the file as eps and open it the colors are there. I made 2 fine cut contour layers (corel) when i got to the fine cut macro i assigned each cut layer a panel cut name, eg cut1 and cut 2. it worked one time then i must have changed something. Where the difference is, is when i went into cut edit i saw the 2 cut layers but instead of showing the color it was showing a number instead. I did it a couple times and the number kept changing. It was getting late and i was loosing focus. Thanks for the video this is the furthest i ever got.

@nick5965 2 жыл бұрын

how do you tell it to do a perf cut?

@Coopercricket 2 жыл бұрын

Do you have any tips for ID Cut on chrome?

@samanthakasper5936 3 жыл бұрын

Do you know what would be causing my file/Mimaki to be cutting the perf 3 times instead of once? It goes back and forth on each side for a total of 3 times before moving on to the top, right side, and bottom. Otherwise settings are perfect.