Mimaki UCJV 300 Part 3 mark detect.

[@juliecovey7301]

I just found these videos! They answer so many questions.. Thanks! I have a CJV300-160.

[@sykessykes3796]

you didn't have to make this video, but you did. thanks for saving my night

[@Artbwoy]

Thank you very much. Extremely helpful

[@AnotherScreenname]

Nice vid! Which material are you using for the stickers? I have a CJV300-160 Plus, but just getting started with the peel-n-stick market. My vendor suggested General Formulations for the economy market (combo of price and quality). Thanks!

[@DLRPrinting]

How do you change color of Reg marks to print on holographic?

[@ginod2279]

How do you tell the programme how many registration marks to look for?

[@juanortega1277]

Hello I’m having a problem where it says mark detect error after there was a paper jam, how would one fix this problem? Please help me. (Ucjv printer)

[@supykun]

Every time I follow this step my CJV printer for some silly reason always gives me an ERROR 201: COMMAND code, and I have to go through a cycle of turning on and off both my computer and my printer. I have no idea why this error pops up instead for me. No matter how I do Mark Detection before sending the cut command, the printer issues a c36 error as well despite no problems on the registration mark. I have no idea why.

[@Ursl32]

Stupid question: how can I cut with the cover open? Because running Mark Detect with the cover closed is quite difficult.

[@jameskellogg3]

There are some metal pieces that are attached to the cover, unscrew them and just leave them on the magnets. Then you can open and close as you want.

[@jonadoom123]

For half cut oes the pressure go up once its laminated? Since it gets slightly thicker? I have mine set to 150. Also I have problems sometimes where the pinch roller on the ends goes over a halfcut decal and completely ruins the job by pushing the decal out and shifting the material

[@pdsequipment]

When you laminate you will need more pressure. I usually set cut 1 and 2 for no lam and cut 3 and 4 for lam. You will probably need a little more blade depth as well. If media is falling out during print make your perfs slightly larger on the half cut settings. Email me at [e-mail] and I can send you a little more info on that.

[@jerihcolobo6817]

you may try setting the cut sorting option in the machine, so that the cutter head wont go back and forth around your printjob during cutting.

[@rockuniversity4621]

What is the advantage of printing - then cutting as oppose to doing both together?

[@pdsequipment]

Some applications require lamination after print, then cut

[@pdsequipment]

I always print and cut together whenever possible. If you are applying a laminate film over the print you will have to print, remove and laminate then remount and cut. Also there are times with a solvent printer that you want the ink to dry before cutting so you may print several jobs then go back and cut.

[@ghenox]

How to cut calibrated in metallized silver sticker?

[@pdsequipment]

If you raise/lower the eye sensitivity it will usually read the marks

[@TheWayne104]

thankyou.

[@KtuluLeaderRise]

Can you link me the printer, vinyl for car decals/ banners, laminate and laminate machine please I’m going to upgrade my business

[@pdsequipment]

Hello, lots of options. Email me at [e-mail]

[@dutchy2]

Did the same but I've got: Mark detect error c36 and also TP DETECT ERROR. Mimaki CJV150-160

[@pdsequipment]

Try making your mark a little longer amd make sure media is loaded straight.

[@justprintitaustralia1935]

I have the Mark detect error c36 constantly no matter what i do, could it be that i need the sensor replaced? I also have Mimaki CJV150-160 and it no longer will detect dark materials @@pdsequipment

[@thumpernats]

Using Illustrator to create a design, then making it print/cut ready ain't easy... bloody hell..