How to mine Dynex, Radiant or Nexa in HiveOS.

[@RedPandaMining]

TRADEOGRE NO LONGER ALLOWS MINING TO EXCHANGE AS OF TODAY LOL “@hereDear miners, mining directly on currency exchange wallets is prohibited by exchange offices! As of today's maintanence, payments containing paymentID will only go out for amounts greater than 100 DNX and will soon have to be disabled entirely. Please stop mining to exchange wallets.”

[@RedPandaMining]

You are going to want to use the Dynex web wallet or IMO the desktop wallet github.com/dynexcoin/Dynex-Wallet-App

[@Parzival-lw8mu]

BZminer stopped working with kernel upgrade, can I downgrade?

[@hdcomputerkeith]

Thank u so so much! the info is like Gold. :)

[@thecanadianpunk-miner4life]

Oh no that was a great way to do it, i also mine to there only to swap with ease then i send it off the exchange once swapped!

[@aleksandartobdzic007]

Is mining payout Nexa to tradeogre allowed?

[@ntproductions.studio]

OMG!!! This man just solved my problem, i was facing since last 3 months, it was the Kernal update, my 3060ti's were stuck at 50mh @130w, Just updated the Kernal and it fixed the issue. thanks man, thanks alot.

[@dannybernardo5915]

So helpful! I spent all night last night trying to figure out why I couldn't get dynex to work, sure enough the beginning of your video explains it! I had outdated nvidia drivers

[@GeekOfAllTrades]

RPM dropping that knowledge on us out here! Great info that will stay relevant for a long time, thanks for all the info as usual

[@UFCNFLGUY]

Great video! Finally got back into the game since the Eth layoff and decided to stick with these three coins!

[@7ac7ics]

Thanks panda.... you always explain it so well...

[@omicron8530]

Very helpful video,as it was before difficulty for me to set flight sheet, man you Helped out. ❤

[@alfiethefeline3311]

my got i was doing updates all my 8 rigs individually now i see this you can choose them all ! damn !

[@MonsterPro321]

I have 3060s mining radiant with thease overclocks: core 100, mem -3000, PL 115 and I get aroung 580 mh. But I have this version of nvidia drivers 510.60.02. Thanks for tutorials it realy helps me and appreciate you and what you are doing THANKS you are the best. ✌✌

[@sjatiwijaya6520]

I mine RXD with 13.3 Gh/s usually get 11000-12000 after yesterday's big pumping I only get 3000-4000 coins per day. it's insane, with hashes increasing from 13Th/s to 100Th/s.

[@rondy87]

🔥🔥🔥🔥🔥🔥

[@akro286]

Yo RPM, are you withdrawing your BTC traded DNX into a separate wallet immediately?

[@nikkoworld]

In your opinion, with 10 radeon VII what would be the right coin to mine right now? since they give the best in etash?

[@domg6614]

Did you tried the samara wallet( chrome extension) for radiant, no idea if it's safe or not?

[@vbrille]

For DNX and 3080ti gpu's, I have better results using onezerominer v1.03 and owerclocking using nvtool --setcoreoffset 255 --setclocks 1470 --setmem 5001 Then I have from 3.850kH @ 119W to 3.848kH @ 134W depending on gpu...

[@alltrac89]

Hey @red panda mining You have an error in your Dynex Sheet, see below. After SRBminer2.2.3 you no longer need -sync. Also Onezero updated to 1.0.3 overnight with more hashrate improvements. Network will be 140MHs this afternoon lol Keep smiling! Dynex srbminer2.2.4 Sheet Fix replace: --disable-cpu-sync 1.195 with: --disable-cpu or an example to add for CPU Hash for first four cards: --gpu-id 0,1,2,3 --dynex-cpu-pow 0,1,2,3

[@kevinhoyt6953]

Thank you for heads up...Works now.

[@naidusaiwalker9352]

Hi, is there anyway to create two custom miners in a single flight sheet in hiveos?

[@arrie456]

I need help... The Algo will not change to sha512256d. I select radiant for the Algo in the flight sheet but when I click the rocket, Ethash keeps showing up in the window.

[@itsnotthatloud]

Where do you get payment ID if you want to mine to your dynex wallet? Dynex wallet version 2.2.2.

[@shammuk02]

mallob resgistration fail i did excatly the same as ur video why isnt it mining?

[@davehall5501]

If I turn on my gpu in my home pc which is currently cpu mining .. will it stop cpu ming to gpu mine? Or can both be done at the same time

[@VoddyShots]

doing the hive-replace messed with my rigs, kept hanging on reboots, nvidia overclocks not working as they did before and nvidia overlock error trying to apply P0 state. AMD overclocks are fine but the rig hangs on reboot. also wouldn't start the miner after a reboot i would have to go in and restart the miner after a power cycle.

[@VoddyShots]

"hive-replace -l" lists kernals then choose which one to downgrade to. as of writing this comment option 3 is what I chose.

[@Dan_Rugs]

Pandaaaa mooning the hashrates 😅

[@elgertota1446]

Can someone help me I have a 2060 6 gb and I can't mine because I get a low ratio .

[@GPURisers]

still on flux for now but am switching soon! Bookmarked

[@hatemsaad2012]

Hey RPM what about AMD GPU 😢?!!!

[@hdcomputerkeith]

i used : --cclock 255 --lock-cclock 1470 --lock-mclock 5001 --pl 200

[@RedPandaMining]

I dont know what to say man. Everyone said Rigel miner was the best even from the hashrate.no guys. did you have PL in the overclocks set? dont need any settings there if you had the extra parameters set.

[@smokingun2544]

After the kernel update of my rig it displays this = No config /hive-config/rig.conf ??? What i do to fix this ?

[@Parzival-lw8mu]

same

[@smokingun2544]

@@Parzival-lw8mu I flashed the usb key again. Now it works !

[@DaniTalksTech]

I've been trying to mine Radiant and I keep getting this error: Solution found but no network connection. Reconnecting. GPU 5:0: radiant solution rejected: Bad Network Connection (0ms) i tried it on other rigs as well, and I get the same error My rig can connect to the internet fine and mine other coins with ease has anyone had this issue before?

[@Apex-xx5ej]

I tried the hive-replace -y -s. But after it finished and rebooted my Wifi dongle no longer works. I've recreated my HIVEOS usb from scratch and the wifi dongle still won't load (even after manually installing the driver). The dongle is ok as checked on anothre windows PC. Does the kernal update change anything on your BIOS? Any idea why this bricked my Wifi dongle? I don't have ethernet where my rig is kept so this has fckd me :( Any ideas? I can see the wifi dongle in hive ok, just keeps showing 'no wlan0 interface found' when I type wifi like theres no driver?

[@hdcomputerkeith]

sorry folks It the Dynex one that blow my psu and now i have 2 evga rtx 3070s blow also! dam it man! man this time i saw the power shoot up to 300 watts pre card with maxed fans! this time i was READY TO PULL THE POWER CARD!!!

[@smacktonian]

Have they fixed this problem?

[@souravagarwal6062]

Difficulty already increasing I don't feel turning on rig again

[@mysteriousyt]

❤

[@MrSalim1020]

Please be aware that mining or pool payouts are not allowed as deposit and will result in a loss of your deposit.

[@Honeyhound]

Ha panda!!!! Ltc has changed Raye down 72Th/s today. What is the big news . What happened? Good for me

[@DMinerzChannel]

My brother HELLO how are you miss my boy!!! you know where I be!!!

[@Parzival-lw8mu]

I upgraded de Kernel and now BZminer is not working!!!!!

[@RedPandaMining]

Try another hive-replace or restart hiveos. Check flightsheet

[@Parzival-lw8mu]

@@RedPandaMining I been mining radiant for a week now with no problem, all other rigs that are not updated are working fine

[@RedPandaMining]

@@Parzival-lw8mu mainly for Dynex for hiveos kernel issues. Bzminer should work I have it workjng on new kernel.

[@Parzival-lw8mu]

@@RedPandaMining don't know, bzminer and miner don't work but lolminer and mini do

[@hdcomputerkeith]

i had to set something off. i really try to follow your vid bro red. dont know why me lol

[@RedPandaMining]

@hdcomputerkeith email me [e-mail] and ill ship you a new 1600w psu

[@alfiethefeline3311]

by the way your overclocks explaination , i must add i think you can put comma near an argument and make it to individual GPU. For example --gpu-cclock 1470,1500,1380 for 3 different GPU's this wokrs usually with all the extra arguments but not works with nv-tool. while the 1470 core is surely good for every gpu on that list of your i think you can fine tune with core off set with individual gpus ;)

[@MrSmity77]

yes i would like to know aswell :)

[@blackmennewstyle]

Sadly all the coins are already unprofitable due to difficulty lol

[@bitcoinpysa-cryptominer]

not true, check again. Nexa and Radiant profitable

[@jozefputirka1137]

RPM - thanks for explanation how to set wallet for Dynex ;) Edit: This setup does not work for me... :(

[@waynechialiao]

Nexa to the moon.

[@shakester2010]

SOAT says Dynex and Nexa are pumping for the wrong reasons. You've been warned. Goodluck.

[@hdcomputerkeith]

ok it my fault gpu fried! i missed typed wrong a setting that brunt it sorry red it mining great! --gpu-offset 225 i was missing the c!!! coffset not offset! ! my own fault BUT why the miner done flag that to prevent a power over load! Ill discord them! thanks red! Mining dynez great!

[@kylaxhd7102]

too late, just waiting next coin

[@dannybernardo5915]

Would love if you can make a video or someone explain how to solo mine dynex on neuropool! You'd think it would be easy but I can't seem to see anything that indicated I'm solo mining after adding "solo:" before the address wallet

[@gorankunovic6404]

Strange rtx4090 is efficient but slow…. 14kh around 110w … logical minimum must be around 25-30kh… miner is not supported that card in full power

[@yass5889]

Leshgo

[@doe4boy1]

Do --password RIG in user config and that will post your worker name

[@ETERNAL_MODS]

thx to scrap the profit

[@C_Man_The_Man]

for dynex, the worker name should be in the password sectio

[@nwdytr2694]

Anyone on Windows10 here😭

[@user-bh9yk2wv4w]

Not for multiple rigs

[@patrickmurphy3]

THIRD!

[@miningbooms]

Just a word of warning to all. I was using a TP-Link wifi adapter AC1300, which has Realtek RTL8812BU. On the old kernel 5.10 it had the drivers, I didn't have to manually load. After upgrading to 5.15, it doesn't have these drivers. One of my rigs is down now 😢 Ffks. I did the update at 2 am of course 😅 Since the rig was headless, I flashed a new image thinking that would fix it. An hour after, super sleepy, I went to bed. Had to order another $10 wifi adapter that's more compatible.

[@andypapagrigoriou1010]

I just followed the steps, and the same thing happened to me. Did a new wifi adapter fix the issue for you sir?

[@miningbooms]

@@andypapagrigoriou1010 I ended up running a temporary ethernet cable and manually loading the wifi drivers with the workaround I posted. That replacement wifi adapter (TP-Link N150 nano) is still in the box.

[@andypapagrigoriou1010]

@@miningbooms I just plugged the rig directly to the ethernet cable and it still shows offline now...

[@miningbooms]

@@andypapagrigoriou1010 you will have to run few commands to get the driver loaded. It will not happen automatically

[@andypapagrigoriou1010]

@@miningbooms This doesn't help. The rig is directly plugged in to the ethernet cable, yet still not having a connection! Can't do updates.

[@AP_Sim]

First

[@shakester2010]

SOAT says Dynex and Nexa are pumping for the wrong reasons. You've been warned. Goodluck.

[@hdcomputerkeith]

one last post! red i did dm srb miner in their discord asking the dev to put in safe guards into the code to prevent burning up rigs if missing ! 12&@^^*@ letter! in the settings one letter dudes and lost my PSU i got from mining cave 1,600 Quite PSU! under red panda's discount code 6 months ago! so i hope the dev fix their mining code later

[@fisher11145Ahotmail]

you were already laughed out of the discord because of this, first off your claimed parameter typo does nothing, secondly even if it did setting all "gpu offset" 255 that would not cause it to suddenly consume 300w

[@bestfriend100]

hive-replace -y -s