HOW TO MIX A 2 TRACK BEAT

HOW TO MIX A 2 TRACK BEAT | with ASHER

Рет қаралды 14,628

Castle Row Studios

Күн бұрын

Пікірлер

@spade5997 11 ай бұрын

The gems are always the youtubers with low subs to start

@GRX3M3 3 ай бұрын

😂😂😂what bro @@BroadcastLounge

@HonorRollFilmz Жыл бұрын

Maaaaaan you don't know what you just did to all my past and future mixes with this gem

@ketarii 9 күн бұрын

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@27naysen._. 11 ай бұрын

The best way to mix an unbalanced 2 track is to load pro-mb or any multiband compressor, turn down all the compression and use the volume knob to turn down/up some part, I usually do the very low - lowmid - mid - high mid- very high and then use ozone imager to fix the stereo image and then from here I have most of the time relatively well mixed 2 track. Also use the pro-mb in minimum phase

@indigopajamas 10 ай бұрын

you can also hard brickwall eq certain sections of the 2 track if you make a double or triple of the 2 track on different channels, then you can use the fader to adjust volume or add distortion plugins without affecting the entire frequency range. for instance i might high pass one copy of a double of the 2 track then low pass the other so that its just playing the low end signal. now i can add plugins and only affect low end frequency range. I can mono out the bass if needed as well as stereo widen just the top end

@BukezFinezt Жыл бұрын

Clean video. I lowcut at 18-20 Hz since my music and the venues I perform at sometimes give you frequencies down to 20Hz. Dedicated sound systems. And yes, it's not audible ... but definetly an important part of certain genres and translated life through those systems. So I'd say don't make it a general rule statement to get rid of everything down there.

@cartel4realrecords 8 ай бұрын

Broo. I loved this video. 1:45 am. I was about to sleep i decided to watch a last video. And now. I can sleep happy and tomorrow wake up to record something ❤❤❤❤

@KhaledN-k Жыл бұрын

VERY GOOD EXPLANATION DUDE , i actually came here cuz i'm working on an order on fiverr and i'm in the same situation

@wheeler-mu9lg 6 ай бұрын

Why am I just finding this video that pro q3 trick is the shit. I watched a couple of videos with this guy he might just be my new favorite mix engineer. Bro knows his stuff.

@ZazaDSan 6 ай бұрын

great content

@alexanderevans305 Жыл бұрын

Gems 💎 where just dropped on me from this video 🙏

@officialyanik 9 ай бұрын

This was great, thank you for sharing!

@YaBoyChe Жыл бұрын

THIS was SUPER EXTREMELY helpful. This dude is a wizard 🧙🏾‍♂️. I’ll be his apprentice

@astralmaster1692 9 ай бұрын

Great video

@mixedbygip8938 Жыл бұрын

Use these tricks in every mix! Dope video bro keep giving the people 💎 ✊🏽🔥

@rafajahnobeat923 11 ай бұрын

💥💥💥💥💥💥

@ryanhenry2096 Жыл бұрын

I recently just came across this issue for a client, thanks for advice on how to handle this issue.

@demotheengineer 7 ай бұрын

Great content 🫡

@verifysounds Жыл бұрын

Great vid!!!

@g.o.9513 Жыл бұрын

Will appreciate a and b level-matched. want to hear the difference. do this for all future mixing videos...

@yungmaker 3 ай бұрын

even more better is just eqing the mid of the beat in proq and pushin the sides

@mnqobigumede6470 Жыл бұрын

Bro I needed this

@MarcoBandsTV 3 ай бұрын

New Subscriber Here 👋 Good Work

@You-Prolly-Right 9 ай бұрын

Free Gems : When mixing a 2 track beat - duplicate it. High pass 1 beat at like 500 hz ( Wherever the bass kicks out ) - low pass the other side at like 500 hz ( Same spot where the bass kicks in / out ) - You now have control of the highs and lows volumes much better - You shouldn't really have a problem mixing a 2 track wit this method, works like 100% of the time.

@phellylandveld9548 6 ай бұрын

aye what that song called bro? Fye tutorial as well 🙌🏿

@realnakel 8 ай бұрын

Don’t EVER low cut your beat or entire mix at 31hz. It takes away from the Low end. Around 17hz should be enough cause it rolls into 21 hz, which is the Frequency the human ear can actually start hearing.

@adamstroebel7973 14 күн бұрын

I hear you, but I disagree slightly. It’s sub frequency where yes you can technically hear them, but you feel them almost 1000 times more than you can hear. From 20-130 hertz there is more physical resonance within the body than audibility. A solid low end has to do with upper harmonics, hence the NS10 trick. With all this being said, everyone mixes differently and if that works for you, respect. Maybe you can teach me a new approach. Currently I focus a lot more on the mids. If I get that right, 9/10 times everything else falls into place. It also helps when not having a sub monitor. In the beginning I used to find myself boosting the low end so much, that it drowned the mix and took up voltage. As soon as I started focussing on mids, I had an enormous amount of headroom. Where the low end slapped with both resonance and audibility.

@realnakel 6 күн бұрын

@ Yea, I currently cut at 20hz on the overall mix because it maintains a Clean but, still full-sounding low end.

@Bleitzofficial 3 күн бұрын

As far as gain staging would it be safe to match the two tracks together to the same db and push it all up with a limited later on? What db typically do you want vocals to sit after mixing them?

@user-vt5lm6tk1k 2 ай бұрын

Nice work.

@frostiibeats334 Жыл бұрын

can we get a mastering video next with asher???

@castlerowstudios Жыл бұрын

Good idea.... wink wink... be on the lookout...wink wink

@BOODA575 Жыл бұрын

can you show us how to gain stage the 2 track

@mwaves4152 Жыл бұрын

what is the beat called? it's so fire :)

@producerfuji_official Ай бұрын

So question when you pulled the frequency now on the pro Q3EQ the one that’s on the vocal track do you leave that part pull down or was that just an example of where you wanted to pull it down at so you can go to the two track and poke apart down do you leave that active or was that just an example

@djkon10th26 Жыл бұрын

Thank you for this informative tutorial! I learned a lot. I'm curious if there's a distinction between employing this technique and utilizing the Trackspacer plugin, which purports to achieve similar results, especially when working with just two-track files?

@davidkovach-tangier Жыл бұрын

Trackspacer needs a sidechain input of something you use to duck something else dynamically, and thus you can't really use Trackspacer on a master bus or ala in this case a 2 track stereo mix/file...