Thanks. Very useful. I appreciate all your Land Rover videos.
@retro.restorations8 ай бұрын
Thank you! 🙂 👍
@Tharedhed3 жыл бұрын
Thankyou. I've inherited my Dad's old stage 1 and have been wondering what to do about the seals. This will work a treat 👍
@retro.restorations3 жыл бұрын
No worries! Thanks for watching 🙂👍
@kylehamilton94955 ай бұрын
Followed this today to get my seals ready to go on! Thanks a lot mate!
@retro.restorations5 ай бұрын
Great stuff. Thanks for watching 🙂👍
@johntattersall76973 жыл бұрын
Another great video, this will save me so much money, and, more importantly, less frustration! I am looking forward to your rewiring one when you finally get your loom from Autosparks. Thank you.
@retro.restorations3 жыл бұрын
Thanks! I'm glad it's helping people out that's the aim of the channel🙂 the loom os due in August 🤞 hopefully with no more delays 🙂👍
@chingchang47163 жыл бұрын
Hi, great video, I'll use those seals when I do my series door tops, I have the idea to use sikaflex 212FC to bond the seals in place it's really good body sealant adhesive that sticks to anything, thanks Stewart.
@retro.restorations3 жыл бұрын
Hi and thanks, sikaflex is good stuff and perfect for the job🙂👍
@walkaboutmotors Жыл бұрын
Great video and great looking truck!!!!!
@retro.restorations Жыл бұрын
Thank you 🙂👍
@FlatbeerBrewing3 жыл бұрын
Nice to see the little man Great video BROTHER
@retro.restorations3 жыл бұрын
Cheers bro, He likes to make an appearance every now and then 🙂. Now things are opening up give us a shout next time you up this way.🙂👍
@highdownmartin3 жыл бұрын
My drivers door ( and the rear door to a lesser extent) if I can see loads of daylight round it, then it’s on the catch and needs slamming again If I can only see a bit of daylight , it’s closed Good video mind, I might give that a go.
@retro.restorations3 жыл бұрын
We do get used to landy eccentricities anybody that only drives new cars gets a shock when they get in an old landy😂😂👍
@rockhouserenovation22642 жыл бұрын
Great truck and great video!
@retro.restorations2 жыл бұрын
Thank you! 🙂 👍
@jennydavewhitney37462 жыл бұрын
thanks for that money saving tip landy looking great and how cute is your lad torquay dave
@retro.restorations2 жыл бұрын
No worries and thanks. He is awesome and never fails to make me smile🙂👍
@robstarkey8099 Жыл бұрын
Thanks for the video. What brand of seals do you use? I've just paid a fortune for what I thought were genuine seals but there's no way the doors will ever close properly. Too rigid!
@retro.restorations Жыл бұрын
I got them from paddocks spares I can't remember the brand they where just the cheers ones. 🙂👍
@jamesmorris37473 жыл бұрын
enjoyed the video i bought the bottom and put them on and the door would not close so put them in the bin you are so right shit i will give your ones a go thanks for the video and advice
@retro.restorations3 жыл бұрын
No worries! Thanks for watching 🙂👍
@samprokop2 жыл бұрын
Do you have experience in doing this with the 109? i.e middle doors? Also wouldn't it be better to try to insert a small washer through the hole where the rivet goes to allow a more secure / larger surface area for the rivet to go against? Great video!
@retro.restorations2 жыл бұрын
Hi, I've never done it with middle row doors but I imagine it'll be a similar process. If you can get a small washer in without making a big hole it could work better but I've never had a problem without. Thanks for watching 🙂 👍
@amoradare11 ай бұрын
Hey mate, what is the name of the rubber product thanks
@colinc54073 жыл бұрын
Hes back again to discuss the 5 sec rule about crisps on the floor :)
@retro.restorations3 жыл бұрын
😆😆😆I'm surprised he didn't call it 🤣
@susanprice93162 жыл бұрын
Perhaps a hand riviter would stop the rubber dostortion? Phil
@retro.restorations2 жыл бұрын
The rubbers do distort slightly but after a week or so they go back to shape and you can't tell. 🙂👍
@lookcreations Жыл бұрын
Great stuff Craig. Would you know if the rear door seal fits the full door and cat flap set up ?
@retro.restorations Жыл бұрын
Thanks matt. I can't see any reason why it wouldn't but I'm not 100% on that I'll have a look at the one in the yard on Monday and get back to you on that. 🙂👍
@lookcreations Жыл бұрын
@@retro.restorations I’ve just cleaned up the steel seal retaining strip which holds the same original flap seal over the door top. So I’m guessing it’s standard
@MathiasDavidsen3 жыл бұрын
Could you please post link to the seals please? I have an old series 3 Exmil, with replaced door seals. They are stiff and big. Must use a lot of force to shut tfe doors. My bet is this will make for a better seal and snugger fit. :)
@retro.restorations3 жыл бұрын
There available from most land rover spares suppliers and ebay you just need to search land rover series 3 door seals if it comes up as a one peace seal or states that it fits a defender aswell then thats what you want but I'll see if I can find a good link🙂👍
Thx alot! I will definitely do this on my old landy Maybe I will be able to lock the doors as well.. :)
@retro.restorations3 жыл бұрын
No worries 👍
@MathiasDavidsen3 жыл бұрын
One more thing : do you do the same procedure for the sill seal?
@jamesmorris37472 жыл бұрын
would they fit a series 2 is there any difference
@retro.restorations2 жыл бұрын
It should fit the same if its all standard I don't believe there's any big differences 🙂👍
@georgejarry39642 жыл бұрын
Land Rover Series I, II, IIa and III 1948 - 1985, Land Rover Defender 1982 - 2016, the Land Rover you are working is a SERIES not a defender
@retro.restorations2 жыл бұрын
I don't think you got the point of the video 🤔 I'm more than aware of the different land rovers but this video is about making a land rover defender door seal fit on a series landy as New series seals are extremely poor quality and don't fit. 🙂👍
@georgejarry39642 жыл бұрын
@@retro.restorations Thank you, indeed must change all the seal in my Santana Series III 79.
@georgejarry39642 жыл бұрын
My 7th Series, my first motorcar at 17 yo was a 57 Series I