How To Mount A Riflescope

[@WHOTEEWHO]

25% OFF Arken Optics with code: whoteewho

[@zachzingale8540]

Before tightening the scope rings to the scope you should look through the scope and find the correct eye relief.

[@AllAboutSurvival]

For anyone serious about accuracy, proper scope mounting is a must.

[@muhammadfaez2035]

😅0​@@coupe50h

[@elmSTREETnasty]

Thanks, captain obvious. I'm sure no one would've been able to figure that out without you.

[@coupe50h]

@@muhammadfaez2035 I think I replied to the wrong comment lol.

[@JamesJones-cx5pk]

I bought a small vise at Harbor Freight for about $25 I think. It works perfectly. I also mounted mine on the corner of my desk. It makes jobs like this a breeze.👍Great channel.

[@rickgoertzen420]

Awsome video i always move scope to front or back just for your personal eye relief. Keep up the great work. YOU ROCK!!!!

[@WHOTEEWHO]

You rock

[@cw2a]

Proper scope mounting comes from a solid base... What ever you choose. You need to degrease screw holes AND SCREWS! You also NEED thread locker! DO NOT ASSUME FACTORY MOUNTED YOURS CORRECTLY!! Then when mounting your rjngs in a Weaver or PIC base. You MUST push rings FORWARD before snugging them down!!! If you dont you will find a wandering elevation problem. Thread locker is not advised on rings. As mentioned many times. You also need to check clearances of the bolt and operation and then adjust eye relief.

[@sonnygay3597]

Thanks for the valuable info .Great for common sense but practical advice . The torque wrench is a grief relief . Always checking out your latest work keeps me motivated and excited about the outdoors.

[@iflycentral]

I use a similar technique, however, I verify the reticle is vertical with a plumb line just in case it isn't perfectly alighted with the elevation knob.

[@stevemott7052]

Good point, I've done that before but only because I didn't use a level.

[@claw1952]

WTW, I thought I was one of the only people that used electrical tape for a bandaid. You go dude.... pure country..

[@WHOTEEWHO]

Yee yee!

[@RavingUGAfan]

I really enjoy your videos. Particularly how you are genuine and you take us along the journey with you. As my eyeballs have aged and scopes have possibly changed …and I’ve bought things that kick more…I definitely have to deal with getting the eye relief set early on in this process and then level and torque. I don’t like those things hitting my eyebrow anymore. Again, thank you and I hope you keep being successful at working diligently.

[@blakesummers7204]

That is a great demo, you said it perfectly and simply stated, for anybody to do it by themselves and do a great job in the process.

[@bobgarr6246]

As said you need to check eye relief. But degreasing your base, screws and screw holes, rings and scope tube are a must. Bore sighting before you go to the range is also a good idea. The remark of " it doesn't have to be perfect " is true, but I try to insure that its as close to it as humanly possible.

[@ozark_trapper]

I have the same exact scope on my 17 hmr. The Hawke 4x12x40mm scope. Fixing buy the 22 mag model. To put on my 22 mag. I just ordered a Leupold VX6 HD 4x24x52mm TMOA scope. To go on my new Browning 280AI rifle.

[@WHOTEEWHO]

Nice

[@shampton911]

Great vid explaining the importance of this

[@Helcat338]

Do a camo painting video on one of these rim fire rifles

[@Ajs19892]

The last scope I put on I did it in my lap lol, just eye balled that the crosshairs were straight by looking through it and torqued it down, the rifle has been shooting great.

[@WHOTEEWHO]

Awesome

[@mattlail-xe8iq]

We want to see the walmart simmons scope ring review. I see the shelves at walmart are almost empty in the scope ring section.

[@scottythebody0811]

You don’t check eye relief at the lowest and highest magnification?

[@WHOTEEWHO]

Nope not really.

[@richwilcox9564]

I really like Hawke scopes

[@lanehammer]

I like my fixit sticks..correct torque is evenly torqued screws..So the mechanical forces are consistent and the stability of the design works the way it should..My high recoil platforms demand it.

[@8762usma]

Very helpful video. Excellent, detailed instructions. Thanks!

[@WHOTEEWHO]

Thanks for watching

[@chrishelms1967]

I need that vise in my life

[@shanegibb997]

I don't comment much , but love your videos and haven't missed one yet ..

[@WHOTEEWHO]

Appreciate you watching

[@diggernash1]

I mounted my vise on an old overhead projector stand; one of the heavy ones. I keep all my cleaning stuff on it. When mounting a scope, I roll it to where I can see out the backdoor. I hang a plumb bob at 25 yards and put a target at the same distance. I use the plumbbob string to level the scope and bore sight the scope at the same time.

[@jeffch14]

Do you not check eye relief?

[@chrissewell1608]

Thats an important step, for me! Otherwise I am having to stretch my neck back and forth to see through the scope properly. When done properly, all you have to do is tilt your head on to the check riser, and you have a clear view. 🤪

[@carlwilliams6300]

I have the wheeler set love it

[@WHOTEEWHO]

Awesome

[@Stump51]

Thank you!!rhat was interesting and fun to watch!!thumbs up!!

[@WHOTEEWHO]

Many thanks

[@toddhall5565]

You planning to let us know what you think of that Blackhound or did I miss a video? Youre correct, Blackhound scopes come with everything needed to do a reasonable mounting job. I picked up their Genesis 1-6x24 for a hreat price at an outdoor show back in February. For the money its got a really clear and bright looking picture through it and all the controls feel good. I'll very likely get another Blackhound at some point. If you haven't yet, check out Maven optics too.

[@WHOTEEWHO]

I already have many videos on Blackhound, but yes that was literally last night's video taking this one to the range.

[@toddhall5565]

@@WHOTEEWHO I'll definitely go back and look through your videos, not sure how I missed last night's video.

[@silvergrizzly316]

Woo! Hoo! 🦉WHOTEEWHO🦉 Can hardly wait to see this thing in action...LIVE ACTION!🫡

[@sturisa]

That was excellent WTW, it looks fairly easy. So you don't use any thread locker on the screws?

[@WHOTEEWHO]

I do not use thread locker, no

[@eggbert191]

Thread locker on the ring cap screws can cause a false torque reading and possibly damage your scope. Only ever use blue locktite when installing the scope rail

[@chrissewell1608]

​@@eggbert191I have never heard that it throws of any torque settings. And even if it did, it can't be enough to hurt anything.

[@eggbert191]

@chrissewell1608 multiple scope manufacturers state this. You're lubricating the threads and very easy to over torque. When you're dealing in small units like inch pounds and very tight tolerances inside the scope tube it's easy to damage the erector assembly. I'm very surprised you don't know this

[@sturisa]

@@eggbert191 Thanks!

[@reapergrim76]

Great to know! 😊

[@wayneyoung7684]

Good information thank you for sharing

[@chrissewell1608]

Those Fat sticks are cool. But, I picked up a Wheeler Fat Wrench several years ago, on sale. I like Fat Wrench, and have only needed it several times. They are on sale periodically as low as $40 - $45.00!

[@ronnieboardman1673]

If i bought a lot of rifle's and scopes probably but no more than I've ever had to put a scope on i just can't justify buying a torque screwdriver even though they are pretty inexpensive. I always have used an allen wrench with lock tight but I'm always careful not to over tighten , never had a problem over the years with any I've done.

[@WHOTEEWHO]

👍👍

[@DouglasPrice-p9q]

... like everything else it's common sense and moderation ... if you tighten screws until the veins are popping out on your neck the screws are gonna break ... a broke off embedded screw is a royal PITA

[@MichaelSimard-v2c]

Scopes are very essential

[@DouglasPrice-p9q]

... I use level bubbles but I don't bother with lapping or those "pointy nose to pointy nose" centralizers ... eyeballing it is good enuf for MOD hunting accuracy ... I'm no bench rest shooter ... my mounting base & scope ring screws are tightened to "nice & snug" inch pounds ... haven't popped a screw or bent a scope tube yet from "armstronging" wrenches ... you missed setting up your eye relief but I assumed you did that

[@garyh1449]

I've poped a few scope base screws and removing them is near impossible. A gunsmith can do it for a price.......a big price at that.

[@charlesbuchanan9203]

Did you set the eye relief

[@davidcampbell2661]

He thinks that is highly overrated

[@ValidSurvival]

Looking forward to more content like this!

[@WHOTEEWHO]

Thanks for watching

[@BlackArcher221]

I mount my scopes identically to your work. I’m a hair more anal in that I use a feeler gauge to get the gap even on the rings. Not over the top but I did get a raised eyebrow by a buddy of mine. Keep those videos coming, cheers.

[@WHOTEEWHO]

Thanks for watching

[@jorgeruelas8356]

Thanks for all your informative videos. God Bless you WTW!!

[@WHOTEEWHO]

Thanks for watching

[@sea-2366]

Thanks for the info.

[@SteveChishamSr]

Thanks for the wrench info

[@ScottBarnes-mt9gd]

that was helpful.

[@OhGawdHesGotAGun]

Relative beginner, still learning before I buy - wondering if there's such a thing as a reliable scope that has software where you can enter the brand/type/caliber/b.a.c./bullet weight/weather/barometer/humidity/barrel length/barrel twist rate/ft above sea level, etc, etc, and have the scope take care of all things vertical when it's told (or when it detects) some or all of this data. I see how accurate the estimations are, and there's repetition. Wherever I see repetition, as a software dude, I see potential software. I understand why something like this would be more likely in a military type of scope, but the more I think about it, that's not a lot of processing. If a virtual reticle can manage the para-whatever it is (when you're looking at a slight angle thru the scope) like a real one, what about allowing the scope to automatically turn the elevation dial to what it predicts the drop would be? Has this been done in an affordable scope before? You could even have a locator in the scope that identifies things for you, like ft above sea level, barometric pressure, even make API calls to determine anything it doesn't already need to know - hell, even identify the age/type/gender of animal in your scope, whether or not it's in season, etc. If it was a KZbin scope, you'd probably get set for your shot & have a commercial play just before you fire....

[@WHOTEEWHO]

Yes. Burris has scopes that do that

[@OhGawdHesGotAGun]

@@WHOTEEWHO Thank you kindly!

[@craigwhowell8955]

? Check for eye relief before locking down; where’s the loc-tite?

[@roberthennesey5166]

good how to video!

[@curtishunter6725]

❤ the ichthys tatoo

[@WHOTEEWHO]

👍👍

[@tdjohnsky]

Whootie, good video, but could you do a video on rifle cleaning sometime?

[@SackettGems.]

Have you gotten your hands on the new arken 7-35x yet? love to hear your take on it.

[@WHOTEEWHO]

Not yet. Trying to

[@showtimeridershouston6054]

Cool video great content. You should check out that Rudolph scope that showed you at ARM4

[@WHOTEEWHO]

Thanks! Will do!

[@HowManyLegsItHas]

That's a nice sheep!

[@bigstorm87]

How do you address the issue of scope role? I can't seem to keep my scopes from rolling a tad in my rings, even when using that pattern when tightening.

[@WHOTEEWHO]

Just keep an eye on the level I guess 🤷‍♂️. Do a little at a time

[@pwmiller5759]

Fun video ✌️✌️

[@chrissewell1608]

Do you ever use a drop of blue loc-tite on those screws?

[@WHOTEEWHO]

Used to. I have found it to be unnecessary. Haven't used it in forever

[@stevemott7052]

​@WHOTEEWHO just glad your hand is doing better

[@Hunter-vl6ft]

I had a youtube channel under a different name, luckily I saved ALL of my videos on external hard drives before I loaded them up. On a brighter day in the future I will re-upload all of them on multiple platforms.

[@deniscullis8518]

Nice one matey xden

[@chrismuncey3861]

It's overkill but try a 4" ebay mechineist level sometime. It's 50x the accuracy of regular levels.

[@PopRivest]

No lock nut?

[@warrenharrison9490]

Need to mount those mounts 🤣

[@MichaelGonthier-s1p]

What! No ring reamer?

[@lewiscollins2670]

I have to ask with the drive me not wanting to know. Why do you have that black tape on your finger?

[@WHOTEEWHO]

@@lewiscollins2670 cut it real bad. Tape holding on the band-aid

[@alanthomas1774]

Lapping the scope to the Rings is a must , What happened ?

[@WHOTEEWHO]

Nah. I have never lapped rings in my life. Not necessary with today's machining. That was an old timey thing

[@toddhall5565]

I bought a scope mounting kit a few months back and am so glad I did. I had pretty much always mounted my own scopes but until I started using the Fat Wrench I didn't realize just how much I'd been overtightening everything. I've recently mounted a couple of sets of rings that I didn't bother lapping as the points on my alignment bars were nearly touching right from the box. Oddly enough, they were both the same brand and probably the least expensive mounts I've used so far.

[@toddhall5565]

​@@WHOTEEWHOyou might be surprised how far off some of these rings can be though, and from brands you'd probably expect better from. All in all good stuff though, as usual. I enjoy your videos. Its great seeing a good ol boy thats genuine and not taking things too seriously.

[@Santaheckler]

I see a strat back there…might be time to show us your strang twangs! 😎👍

[@WHOTEEWHO]

I actually have quite a few music videos up

[@georgekershner6626]

You don't level it also up down?

[@WHOTEEWHO]

If it is level left and right then it is also level up and down

[@robertwies6806]

Nice way to mount a scope.

[@WHOTEEWHO]

👍👍

[@brucelewis1017]

Nice vice

[@WHOTEEWHO]

@@brucelewis1017 👍👍

[@brownjohn721]

What is that gun?

[@fotispapadopoulos6933]

Adam: How did you know you had proper eye relief before installing scope in the rings?

[@WHOTEEWHO]

I always put the scope at about the same spot in relation to the action

[@deadwright534]

Blue lock tight so the screws can't back out

[@WHOTEEWHO]

I never use loctite. I used to. Have found it unnecessary

[@deadwright534]

@@WHOTEEWHO I use a drop on everything, may not be necessary but I've never had a screw back out.

[@eggbert191]

​@@deadwright534gives false torque reading and can cause damage to your scope tube

[@cw2a]

Lock tite is not recomended in your rings. As Adam says proper torque is your best friend here. But LOCK TITE THE BASE to the firearms!!

[@Diso1017]

I know hickok45 still having problems he put up a video the other day

[@vincewolf5142]

Bro Comment and get down to it!

[@cliffb.2416]

What's your opinion between Black Hound vs. Arken? My choice is Arken.

[@WHOTEEWHO]

Arken is my pick

[@davidscroggins5853]

Is there a better social Media group than Facebook let me know which one you on I will switch I am hearing a bunch of bull about Facebook

[@WHOTEEWHO]

All are trash in my opinion

[@IndependentArmz]

Where you at Old Man

[@WHOTEEWHO]

Fell asleep

[@IndependentArmz]

@@WHOTEEWHO You needed it

[@curt2742]

Duct tape. Bam! Takes 10 seconds

[@WHOTEEWHO]

Boom

[@curtishunter6725]

Don't use the goodentight tork setting

[@WHOTEEWHO]

Nope!

[@pabloco091]

Looks like the thumb is healthier

[@WHOTEEWHO]

Better every day

[@stevemott7052]

I use my smart phone as a level because it is much more accurate.

[@HOOSIERDADDY385]

👍👍

[@WHOTEEWHO]

👍👍

[@charlesmorgan1879]

I lost the ability to type in chat or comments which is why I sent emoji that usually not available !???🤣

[@mikewebb8456]

👍WTW

[@WHOTEEWHO]

👍👍

[@DinoNucci]

PizzA

[@WHOTEEWHO]

PizzA

[@garyhopkinssr8561]

👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾✌

[@yalieangami6233]

À 😘💕👍👍

[@kennethwinkler9320]

😅

[@grabir01]

Level your optic? Is your vice level? Is your weapon a perfect X,Y in your vice? Come on man!

[@stevemott7052]

Only needs to be set parallel to barrel. Other plane not as important.

[@WHOTEEWHO]

Leveling the vice is irrelevant.

[@grabir01]

@@WHOTEEWHO Is your home level. Concrete level? Table level? Vice Level. Weapon level? You are the one that put a level on your scope.

[@grabir01]

@@WHOTEEWHO That was my point. That putting a level on your scope is also irrelevant.

[@grabir01]

@@stevemott7052 Use a laser. Do what you want.

[@garrettforchrist2700]

Very nice instructional video! If they end up being okay with this one, maybe you could do more instructional videos!🇺🇲✝️🇺🇲 11 For it is written, As I live, saith the Lord, every knee shall bow to me, and every tongue shall confess to God. 12 So then every one of us shall give account of himself to God.

[@coyotiess]

HOW COME YOU NEVER USE IT? you NEED A TROPHY ROOM!

[@ryankosik18]

WTW for President 2024

[@jamessanders4310]

How are you going to cope w u-tube new rules?

[@WHOTEEWHO]

Doesn't affect me

[@waynemilles366]

You tube is getting ridiculous.

[@Jeffb64]

Sorry Who Tee Who, I missed the live tonight. Wife's honey do list. 😂😂😂

[@WHOTEEWHO]

I missed it too! Fell asleep