Рет қаралды 16,775
To help you install your PREVOST PIPING SYSTEM compressed air network correctly and durably, we have compiled the key steps for quick, effective and long-lasting installation. All the tools used in this video are listed at the end of the description.
Step 1 - prepare the pipe :
You will need a tool kit for preparing aluminium pipes (available in our assembly accessories)
0:19 - Define the required pipe length and mark the cutting location.
0:23 - Cut.
0:35 - Trim and chamfer both ends (special tool available in the tool kit).
That's all there is to it - your pipe is ready to be installed!
Step 2 - assemble the coupling on the pipe :
You will need one or more wrenches (kit available) and assembly fluid for aluminium pipes.
1:06 - Mark the length of pipe to be inserted using the mark on the wrench specific to the PPS network.
1:11 - Lubricate the end with assembly fluid.
1:15 - Loosen the PPS1 coupling by one quarter-turn and fit it to the pipe.
1:23 - Initially, tighten the nut by hand.
1:27 - Subsequently, tighten it by one quarter-turn using the wrench.
Following these steps will ensure that the coupling is properly tightened on the pipe.
Errors to be avoided during assembly :
1:56 - Do not cut the pipe using a hacksaw or any other unsuitable tool (non-perpendicular cut resulting in the pipe not being correctly inserted into the coupling).
1:58 - Do not grind the ends of the pipe with an unsuitable tool, as this could result in a poor chamfer that would damage the seal when fitting the coupling to the pipe.
2:01 - Do not disassemble the coupling to fit it on the pipe, as this could adversely affect the assembly of internal parts, which would no longer be optimally torqued.
2:09 - Do not tighten the coupling with a wrench not designed for this purpose (e.g. tongue and groove pliers). These tools do not guarantee optimal tightening and can damage the nut.
2:11 - The couplings must be tightened to the recommended torque. Over-tightening the nut could damage internal parts, preventing the coupling being properly mounted on the pipe.
PREVOST services :
More information about the PREVOST PIPING SYSTEM can be found on our website: www.prevost.eu/prevost-piping...
Request a drawing and a free quotation for your compressed air network from the PREVOST design office: www.prevost.eu/ringmain-drawi...
Contact us for more information: www.prevost.eu/contact-us.html
Tools used to assemble the network :
Tool kit for preparation of PPS aluminium pipes: www.prevost.eu/pps-ct-tools-c...
PPS1 coupling wrench kit: www.prevost.eu/pps-ck-tighten...
Assembly fluid for PPS aluminium pipes: www.prevost.eu/pps-al-liquid-...
Special wrench for the PPS compressed air network: www.prevost.eu/pps1-cle-tight...