How To NOT Emergency Start Your Generator

So your generator cord or pull starter is broken and you need an emergency quick fix to get it going. There are many videos on the internet suggesting this fix with a cordless drill. I think this is unsafe and you could seriously hurt or injure yourself. This is my warning to you - DON’T DO THIS AT HOME. Watch to see why.
I’ve got a better and safer way to start your generator. At the end of the video, I’ll point you in the right direction.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a new starter ➜ amzn.to/2KrchLS
For more videos like this, check out:
👉Generator Playlist ➜ • Generator Video Series
👉How To Winterize A Lawn Mower, Generator, Pressure Washer, Etc. ➜ • How To Winterize A Law...
👉How To Adjust Or Set The Valves On A Honda GC Engine ➜ • How To Adjust Or Set T...
👉How to Adjust the Valves on a Stihl 4-Mix WeedEater ➜ • How to Adjust the Valv...
👉WOW! Hidden Greasing Spot On A Chain Saw ➜ • WOW! Hidden Greasing S...
🔧WELCOME to the Steve’s Small Engine Saloon KZbin channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #troubleshooting #engine #doityourself #lawnandgarden #generator #generators #honda #tecumseh #champion #briggsandstratton #kohler

[@StevesSmallEngineSaloon]

✅Click here for a new starter ➜ amzn.to/2KrchLS For more videos like this, check out: 👉Generator Playlist ➜ kzbin.info/aero/PLhORnVQxJe0XIIn22DGy0H356wVhXj2qq 👉How To Winterize A Lawn Mower, Generator, Pressure Washer, Etc. ➜ kzbin.info/www/bejne/p5TGlaJoirKAqac 👉How To Adjust Or Set The Valves On A Honda GC Engine ➜ kzbin.info/www/bejne/aJPJpXSXbq1rhKM 👉How to Adjust the Valves on a Stihl 4-Mix WeedEater ➜ kzbin.info/www/bejne/oHLcnX13mKtgn6M 👉WOW! Hidden Greasing Spot On A Chain Saw ➜ kzbin.info/www/bejne/iJXVcqSme5iDoZo You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

[@welderp5990]

If you are worried about the kickback get a breaker bar ratcheting adapter and put it on your drill so it can free spin the other way once started, that way you can remove it without kickback

[@tonytuesday8339]

🤣

[@frank9649]

you are absolutely correct....a ratcheting adaptor works perfectly for this trick, no kick back at all !! but, remember, if the stud breaks in the block, you're in for a lot of work fixing it, so always use a drill, do not use an impact/driver, that will snap it off! even a drill could snap it. Sooooo do this at your own peril!

[@chamunorwachibanguza7902]

​@@frank9649hi, can I use a drill to start a chainsaw?

[@wcjcnc]

How would this work? If it kicks back it’s still going to break your wrist.

[@brazoon1]

Funny enough the shaft inside my Milwaukee drill broke from the kick of starting my generator with it. Now the head of the drill starts to unscrew if I'm not quick enough about pulling it off when the geny starts up. My drill is now a dedicated generator starter with a safety feature built into it. lol

[@WaveAction777]

I tried push starting my generator and it didn't work, just ended up scratching the paint off the bottom as I pushed it on the ground ...

[@conner5611]

Try bump starting it bump in too it a couple of times it should start 😋

[@JF-fx2qv]

Yeah, one time I had trouble and so I kick started the crap out of it and now it leaks gas?

[@troygrant5418]

Put it in second gear and Pop the clutch...

[@JF-fx2qv]

@@conner5611 I'm thinking ... put in a C130 and drop it on China.

[@jeffmoore2351]

Find a hill to roll off and bump start in 2nd gear no throttle unless its a two stroke drop the clutch. If you manage to pull a wheelie all the better for getting more fuel into the carby let me know how you went. Aussie Jeff

[@hodge542]

project farm does this in every one of his lawnmower videos but he uses a corded drill that doesn't stop dead when you lay off the trigger and also i don't think he lets off the trigger until after he's pulled off, he explained it once and i'm pretty sure he said it was risky but some of those engines are getting weird fuels(for science) that don't always want to start

[@mooman86]

Kyle Hodgkinson yup what I came here to say !

[@D2O2]

Yup, didn't see this comment before posting my own.

[@ehsnils]

Many cordless drills actually shorts the motor when you release the button fully and that's what causes this problem.

[@bobnwashington]

I used my corded drill to troubleshoot my pressure washer. It fired & twisted off the chuck shaft, darn near tore off my hand. After some thought I bought a ratchet for a breaker bar on Amazon. 1/2" socket driver for a drill chuck. Used drill with ratchet, same thing happened. The ratchet changed direction while cranking & locked up. SO, I took the ratchet apart, J B welded it so ratchet wouldn't change direction. Use it all the time to start pressure washer (it has no starter), put a shield over the flywheel, just a hole for socket. The ratchet allows the engine to overrun the drill (*L*)

[@thephantom1492]

His first error is to use a drill in first gear. A quick search seems to be a 600/2000RPM drill. Since he was in first gear, it was the 600RPM. The engine turn at 3600RPM and possibly faster initially... There is absolutelly no way for the drill to accelerate to 3600RPM while in first gear. If he had used a more powerfull drill in highest gear, it could have been accelerated to the engine speed. Project farm use a wired drill that is quite more powerfull, so is able to go in high gear (well iirc there is no gears, so always in high) which probably match more the engine speed anyway. Also, his drill do not brake when you release the trigger, unlike this dewalt one.

[@jeffersonparks2346]

You keep holding the trigger on the drill as you take it off the engine it doesn't hurt me that's my opinion

[@ryanb1874]

Feel like a ninja could since it and back off quick enough

[@Jabba.1]

That's what I do, but sometimes still gets me a bit and hurts, I also stick a nut in the socket so not so deep and comes away quicker.

[@jeffpiatt3879]

Hi Steve, You are correct, that a drill by itself will end badly with a damaged thumb- much like the old hand start cars from years ago. However, as the commenter below "Rhino and Coleslaw" remarked if you have a ratchet device or "one way bearing" between the drive of the drill and the socket that starts the generator, you won't experience the damage to your thumb. I have a setup with a one way bearing (sprag clutch) that allows me to start my model airplanes and helicopters without this issue. The trick, is finding the "ratchet" or one way bearing that allows the drill to drive in just the start direction and lets it "slip" once the motor starts.

[@ohiofarmer5918]

I did this after I saw a mechanic on KZbin do it. The engine has a five pound flywheel on it and it fired three licks on only a tiny amount of carb cleaner. The tapered cone of the flywheel ran off and took a bounce and ripped my skin right off my finger to the bone. I could send you a picture of it if you want to lose your lunch.. one full month for the wound to close. I saw Bruce from Canada do it with just one hand Mustie1 often turns old motors like this without the spark plugs and installed when the engines have not run for a while Thanks for showing this. You reach many more people than I could I'm a lifetime

[@almosthuman4457]

So you tried to start an engine with a cracked flywheel assembly? Sounds like you shouldn't be working on engines at all. Don't blame the tool for operator error.

[@ohiofarmer5918]

@@almosthuman4457 Flywheel was not cracked. I used a Bosch drill motor that turns two thousand rpm. Do what you want because you have all the skillsets to never get injured. I'm in awe of you and will take your advice and never work on another small engine

[@vetnumb1218]

Thanks for the video, I use a large rubber bushing and press it against the shaft. If you do that there is not a direct connection. This is a lot safer and works great.

[@nnorris7236]

Therein lies the difference between dangerous and genius! Good thinking!!!

[@kennethpink7664]

If you use a air drill it will free wheel when started.

[@mdevidograndpacificlumbera1539]

Good idea man

[@Jabba.1]

Will try that with mine cheers

[@xm1193]

Well fellas? Did it work?

[@tolerancija]

If I got air, I got power, which means I don't need the generator :D

[@j.d.farmer6164]

Model airplane flyers used a 12 volt hand held starter motor (geared) with a rubber cup inside an aluminum fitting to spin the engine's propeller. This worked safely, but left a ring on the model's spinner (if it had one). Model helicopters first used a belt that would fit onto the aluminum fitting just mentioned. This provided a real headache for starting the engine. Later, model helicopters used a female hex fitting driven from a male hex fitting on the hand held starter, but the starter had a one-way bearing driving the hex fitting. This worked well, and had a good safety record. Witout a fitting that can spin freely when the engine starts, you run a real risk of injury. Models used engines from 1/10 HP up to 5 HP (roughly). A generator can have anything up to 12 HP (roughly). Using something like a one way bearing makes normal starts fairly safe, but does not address a kickback on a starting attempt.

[@kastbarg]

Back in the late 70's, you could buy a tapered cup you installed on the flywheel and a matching rubber cone that you put in your drlll that drove it. It probably didnt kick like a socket does but it didn't stick around long either.

[@andrewsiff]

Dude! I’m old enough to remember when every small engine had the notch and nothing else! Keep on keeping on!

[@TiredOldMann]

What about the hand crank ? Wind it up and ....nothing . Do it again and again and again .......

[@semco72057]

I checked that video and I am glad that you gave us this information and it is helpful and I will use it if needed.

[@MowerMike]

Thanks for posting this. I was about to do a video on the drill method to test it, but no anymore. I can see that really going south.

[@billharris3049]

I've done this for years, both thumbs intact.

[@maddogjnr1554]

Does it kick on all drills or just his

[@tolerancija]

Can you start a diesel generator too?

[@victormochoa1618]

I just started watching Steve's show and i think he makes small engine repairs seem not so tough to try. Makes everything seem it's as easy as having a couple of cold beers .

[@StevesSmallEngineSaloon]

Right on Vic! Thank You...

[@jamestackett2879]

Good video Steve thanks for the advice I have seen this on u tube never tried thank you for keeping us safe

[@wildefox1478]

Great tip Steve, thanks for sharing! This method is very dangerous!

[@jimdunkle4823]

When I was working on a farm (60 tears ago) we had a john deer with hand crank start. It wood kick back, you learned quick how to work it!!!!

[@stevensargent6222]

I have made up a socket set-up that works like the driver starter's for high pro racing engines where they use the external starter to turn the crank shaft, my socket can only go one way and when the engine catches it will free spin with the engine, and dose not stop abruptly like yours did, but will free spin.

[@winterradicallds8353]

I have that as well but I put a free spin one directional gear on the end of the drill and it works great to stop that kick back

[@steveross85]

Great advice Steve. This is really good for people who are maybe not mechanically inclined. Love the show buddy🤙🍻

[@StevesSmallEngineSaloon]

Thank You...

[@thomasderbyshire4935]

I’ve always used this technique. I’ve had this generator now for 9 years and the pull start has been broken for 1 year. But ever since watching this video I don’t dare to do it anymore so I just bought a new pull starter assembly. Thanks for the tip.

[@StevesSmallEngineSaloon]

You're Welcome...

[@keepcalm1104]

Excellent Steve and thank you for saving hundreds of thumbs. 👍👍 from my safe and not broken thumb 😁

[@isaaclang6031]

Glad I saw this video a few months ago, I started to do this with that honda I tossed and this video started ringing in my ears so I put the drill down!

[@justinberrett7479]

First, let me say thank you. I enjoy your videos. The content length and humor are great. Do you have a video on best way to clean old gas tank? Thanks Justin from Las Vegas

[@nickolasvaughn265]

It's all about how strong the drill your using is and if your trying to start something with too much compression I tryed starting a riding mower with a DeWalt drill and it wouldn't spin the motor but for my push mower it works great

[@frankcadillac9151]

Another thing that's bad news is using an impact wrench to try to start a small engine . It can, and usually will, wring off the nut and the end of your crankshaft

[@stonemason9063]

it snap the crank in half all together, I've seen guys do this on weed whips. snaps the crank right at the rod journal

[@colinantink9094]

I have to do this. I just don’t have the strength to pull start. However. I use extension bits. The clutch on my drill so it doesn’t spin my drill and wrist. I also have a loose grip on the drill. And lean back. But it’s still an accident waiting to happen but I don’t have a choice.

[@ricksebrell8094]

I liked the idea of the drill to turn over the engine for my outboards,I get tired of pulling the rope,when I’m working on them.

[@mwelsh64]

Oh Man! I just asked your opinion about this yesterday (I think). I came back to watch more videos and found this one. I don't think I'll be trying this at home. Thanks for this vid!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@bobwelch5056]

Thank you Steve for looking out for us

[@StevesSmallEngineSaloon]

You're Welcome...

[@thinkingimpaired5663]

Ive seen drill starts done on other youtube videos, but i thought it might kick back or start then break a finger or two. So i never tried it. Thank you for the heads up on safely emergency starting.

[@StevesSmallEngineSaloon]

You're Welcome...

[@UDoIt2]

A tip that may work - set the clutch on the drill so that it will be enough torque to turn the engine over but not so much that it will rip the drill out of your hand once it disengages.

[@georgeian3243]

I start my gas water pump with a drill. As others have mentioned, you have to keep the drill running (pull it off at the right time) or have a ratchet to prevent the drill from locking up because it’s spinning slower than motor as it comes up to speed. In my case, the nut on the end of the crankshaft came loose because I let go of the drill trigger too soon and the slower turning socket had the effect of loosening the nut. When the nut flew off the shaft, it destroyed the plastic cooling fan. I replaced the fan and put some Permatex Red on the threads and the nut has not loosened off since. I removed the recoil starter from the housing, drilled a one inch hole in the centre of the housing and remounted it on the pump. I use a 12mm deep socket that extends past the hole so it can’t fly off inside the housing. Works great...the pump was a hard start in the cold of spring when we get some flooding in the yard...now it starts easily.

[@paulfarmerful]

Oddly enough I used this method a couple of years ago (trying to get my lawnmower to start) and soon realised this risk. My solution though was to buy a socket with a built in ratchet which reduced the risk considerably.

[@97Intruder]

I just had that same thought of the socket with a built in ratchet, and also had another idea, an old ratchet that you can weld a shank from a broke drill bit to(the side facing you)....it would require a certain type of ratchet I've got a couple, a Husky and a Greatneck....and I don't know if a drill bit shank is weldable, or too hardened....the ratchet would give another point to hold on to. mitis.shop

[@Z-Ack]

If you can come across an old bicycle sprocket that used a petal brake rather than the squeezy bits, those are a one way deal and will free spin when it starts.. you could also use the same thing with an elrctric motor strong enough to turn the engine over and it would act as a home made starter.. but i dunno how long the bearings in the bicycle would last running at a gas motor speec but id guess quite a. While seeing as how many bike to motor bike converdions you see...

[@christophercharacter3606]

weak hands weak wrists

[@kevola5739]

Back in the day when we used to handcrank start the old McCormick tractor my Grandpa always told me to keep all your fingers on one side of the handle including your thumb or your going to break something If the engine backfires or engine pressure kicks back. The tractor shaft and handle had tapered engagement slots to push the handle out of the way when started but it was still a dangerous situation. If you have no choice, keep all your digits around one side of the handle so that the torque will throw the crank (drill) out of your hand instead of driving it into the palm of your hand. Or better still, just listen to Steve. That is why we are all here for. Right? Darn fool kids!

[@jasonbusch3624]

My Grandpa knocked his teeth out when he was 20 years old. He was starting a tractor with a crank and it backfired. Cought him right in the mouth and knocked almost all of his teeth out. He has had dentures ever since.

[@kevola5739]

Jason Busch - I fully understand and sympathize with your Grandpa. Those were days of extreme DYI because it was the only option. Tougher than the rest, but showing us the path to a better way. Let’s hope we listen and pass on the family wisdom without losing eyes, limbs, or teeth. Cheers to Steve for alerting those without wise old Grampa’s, Dad’s, Uncle’s, and older brothers. Raise a glass and plot out tomorrow’s chores safely.

[@googlesbitch]

Most cordless drills have an auto brake feature that locks drill when trigger is let off for the purpose of preventing screws from being stripped out after screw is completely screwed in. The kickback is the momentum from the generator running while drill brake engages so your hand and wrist becomes the shock absorber.

[@leorigby3069]

I've never had a pull cord on my mower and as suggested in other comments if you have a violent brake don't let go of the trigger until you pull it off. One warning would be don't use your best drill! I use old dewalts as I have loads. Motor can get very hot and I've ruined one gearbox.

[@markstott2218]

sir you are right the kick back is a mother trukcer. I used to have a 3hp engine that kicked back hard and it ripped the pull cord out of the handle and i was hurting. Heres one way to make it a electric start is get a slip clutch so it would not destroy the housing or what is ever around it. Like the ones on a 10 speed bike our mountain bike maybe a old dirt bike may have the right parts

[@unclemarksdiyauto]

Thanks, i would have forgot all about the new drills stopping with a brake, and yep, breaking a finger, wrist or hand. Thanks for the warning! I was just getting my gen ready for a winter emergency! Just bled and refuelled with a 1 litre of engineered 4 cyl fuel, & if I need it, it will start and i can add some fresh premium. (Thanks again for that video too!)

[@StevesSmallEngineSaloon]

You're Welcome...

[@MartinRodriguez-gx9cs]

I’ve turned my outboard on like this. It actually saved my behind a few times. I found that the trick to turning it over is to spin it with the drill then pull the drill off the nut so it doesn’t kick back.

[@skyguiuan5952]

Thanks, Jeff Bridges!

[@Leonardokite]

Good call. I just watched your other vid and I had forgot to like it.....2 likes from one video! Good job Steve!

[@fbiagentscully869]

Their is a safety trick to starting your lawn mower, generator, snow blower this way.....and it can be done safely!. Make sure the clutch on your cordless drill is not locked and set to a number only high enough to overcome the compression. Also make sure your cordless drills clutch will work similarly in both directions (this is actually the most important thing). The worst thing that can possibly go wrong is the socket sticking to the nut, but that is not a big problem.

[@personifycreation9725]

i use 12 point socket. run my air conditioners everyday. havent had a problem yet. my generator is a dewalt 6500

[@joeystromboli65]

Thank you for that pointer

[@mikedolman7056]

Steve a tricky one but perhaps in a life threatening situation perhaps someone would have to resort to this method, but you did the right thing by far by pointing out the pitfalls and dangers of this action ( somerset mike).

[@StevesSmallEngineSaloon]

Thank You...

[@girohead]

Thanks for showing this. I actually saw your other video first and was going to suggest the drill idea. I've not done it but appreciate the safety tip. I suspect you used a standard drill and that some of these hi torque drivers should be able to do it just fine, but good to know of safety.

[@engineclinic]

Lol. I just had a friend ask me about that and I told him I started a generator that way for a year but you have to use a sloppy socket and be ready to pull out before the climax then I opened KZbin and this video popped up.

[@charredskeleton]

I'm really glad you brought this up. Come to think of it newer drills with "one hand" keyless chucks have a sprag clutch to lock their arbor, this is what allows bits to be safely loaded with only one hand on the chuck. If they're overrun the chuck will lock... things could get real violent form there. Thanks for posting you may have saved me a broken wrist!

[@StevesSmallEngineSaloon]

You're Welcome...

[@SpeedyJoe.]

Thank you Steve

[@Ryan318l]

I made a little ratcheting device that spins clock wise but free spins counter clockwise so when the motor stars, I don’t break my wrist... again.

[@Z-Ack]

You mean a bicycle gear?

[@excelexpresss]

Hi Steve, thanks for the video. I’ve got the same generator you’ve got on the bench but when I try and start it , it kicked back and damages the pull starter. I can get it going with the electric start but it kicked back on that and the stater motor seems to be under strain. Any ideas? I’m thinking timing but don’t know where to start with thar. Thanks in advance, Tim from the UK.

[@BigDmike24]

Good information! Thanks for sharing.

[@StevesSmallEngineSaloon]

You're Welcome...

[@How_Lay]

Use to start my old mini bike like this all the time!

[@mikedelcaribe7422]

Steve, what can you recommend to start a a small 1.6 KW Yamaha EF2000is inverter generator with compression unload? I dropped a tablespoon of motor oil in the combustion chamber and turned the crank to the valve closed position. When it comes time to start after its been setup like this for storage, the starter rope is really hard to pull. How can I unload the oil in the combustion chamber to make it easier to start?

[@jerrygeorgopolis8015]

Good advice Steve, thank you. Should be able to purchase a Universal Replacement Cup with notch ?

[@Rebel7469]

Been bench starting mower engines this way. Works best with 3/4 drive impact, more torque and does not seem to kick as much.

[@goaheadmakeourdayscooterpe9644]

Years ago had a push mower I could't get the pull start parts for, took a brand new 1/2 inch corded Sears drill to start with a socket on flywheel and it worked ok untill motor backfired one time and sheared all the teeth off the gears in the drill. Lesson learned.

[@StevesSmallEngineSaloon]

Thank You...

[@kenreese2791]

You can RAP not tie a rope around the silver cup adapter for the pull starter . I think there is a Enoch for the end of the rope . Rap the rope around the cup so it slips off at the end , make sure when you pull the rope the engine turns in the right direction and it is turned ON .OR set your drill clutch to a lower setting ? I learn a lot from your videos , thanks i won't brake my thumb .

[@TiredOldMann]

I remember trying to hand crank a British Ford 4 cylinder motor . I got it to fire once . I went to the store and bought a new battery . This was in Florida .

[@FabricatorFactory]

Lol. You need a one way clutch. Like an old crank shaft twist handle start. Better yet. Scrap an old starting motor keep the bendex drive and pinion gear on the shaft from the motor. Take everything off the shaft machine the shaft under 1/2". Then make a hole in the flywheel guard to pass the bendex drive through to make with the engines ring gear. Great tip. Good job.

[@pauld2672]

I have 240 volt drill for starting all my mowers, I can't start small engines by hand anymore my shoulders are still strong but won't allow rapid movements and an older style cordless drill with 20v battery only for the generator.

[@fukkyoutube]

it hurts cause you stopped the drill you did a good job creating an effective dont try this at home video though

[@prospectingwithdisabilitie8288]

Oh man I hope your thumb is OK bro thanks for sharing and I completely understand why its not safe

[@StevesSmallEngineSaloon]

Thank You...

[@Willy12927]

There is a ratchet adapter that I use on a breaker bar that can be adapted to fit on a drill that works very well to start engines. Maybe a video showing this type of set up would be very helpful.

[@StevesSmallEngineSaloon]

Thanks for the info!

[@cudadog11]

It's safe if done right, like this preferably with another person helping: Spin it up with the drill, person helping flicks the ignition switch as you pull the drill off. Easy, safe. You -can- do it all yourself, but really shouldn't be holding the drill with one hand just in case.

[@pyrog.c.c89]

What is the best 7500 watt generator. In you opinion.Thanks

[@frankcadillac9151]

Steve, when are you going to get around to zero turn mowers, that are the rage now. I'm retired but still work part time at a 600 acre abbey repairing farm, but mostly lawn equipment, the sisters have three zero turn mowers .

[@jimrogers2824]

The problem is the brake in the drill. When you let go of the trigger the drill has an internal brake, this may also spin the nut off the crankshaft when the drill stops. An electric 1/2" drill without the brake would likely work with mush less chance of locking up or spinning off the nut. I raced go karts for years and we used an engine starter with a battery to start 4 stroke engine by using a socket on the ratchet device on the older Briggs. On two stroke engines it was no problem we used the starter directly on the shaft with a special deeper nut with a set screw in the nut and jammed into the shaft.

[@billfischer6464]

I've read many comments here, and the pull back "out" method dosent always work! 👍 Thanks brother!

[@gravelyman]

I agree. Guys please don't do that with the drill. I sprained my wrist pretty bad years ago. Great info Steve👍

[@StevesSmallEngineSaloon]

Right on Buddy...

[@DaleB809]

I made a slip socket so it comes off once it starts. Been using it for years. But your right. Thats why i made my tool for this. If you think about it you will be able to make one. Really easy

[@jimfarmer4391]

Please describe a "slip socket"

[@DaleB809]

@@jimfarmer4391 you grind down every second tooth on a 8 point socket backwards so when the motor starts or kickbacks it just pulls away

[@bdmitx]

I believe that the threads on the flYwhell shaft are left hand threads ! Not totally sure on that for a generator , but I know it is left handed threads on my chain saws

[@Ranger-vv2jv]

Steve you remember the old 5 hp horizontal shaft on gocarts ,minibikes.They had 5 balls in a case.You can use a drill all day and many years.But they have to be a Briggs ,old flat tappet 5 hp engine. We raced go carts never started one except with a drill.

[@Bradwick1]

Is there an easy mod to make this work? If the socket was just on the edge of the nut maybe? Turn down the resistance on the drill to just high enough where it cranks the engine but slips when it starts?

[@racerbear77]

That’s a great way to shear the key way

[@britjamaine9229]

I have a bit for my drill designed for RC engines that use a one way bearing so when it starts it just spins. Seems like with some grinding you would be able to fit the right size on it but would leave chance to a projectile. Never mind just fix the rope

[@DZCamaro-kz2vd]

How many beers was that start, lol? A case? After a case, the pain should subside, but the memories will last a lifetime!

[@BrucesShop]

I understand. I have never done it on a generator but have done it on a smaller engine.

[@dougalexander7204]

Steve how do you take the plastic fan wheel and fly wheel off a stihl BG86 leaf blower? Mine’s locked up and I wanted to open the engine and see what was going on. By the way, stay awesome.

[@rodneydolman1]

Granted this method has some risks involved but it works I've done it many times.. If you've ever crank started an old pommy car you soon learn to keep ya hands just so..

[@joshuaphillips9277]

You're right Steve don't use a drill driver use a mid torque or high torque impact wrench they don't kick back like that.

[@Jacobsen-ij9hn]

I did this with an old 12hp Kohler way back..luckily the handle on the drill cracked before my wrist did.

[@wahoo2792]

Next time you go to lowes they have a drill attachment for like 15 bucks that is made for starting small engines

[@fukkyoutube]

just bought one last week best investment I've made in my adult life

[@nelsonthekkath4830]

Definitely it's not safe! Some guys do it in certain way like corded electric drill and keep pressing the switch till the drill pulls out. It's like starting a old stationary engine. And in that video which you have shown now, the engine you are trying , seems like it needs valve gap adjustments, by sound I feel like so. If the automatic pressure release is not functioning, the kick back will be unimaginable makes the situation worst. All the best my friend. I will keep watching your videos.

[@nickflopper]

I get a lot of redmax backpack blowers from the scrapyard and they are sometimes missing the recoil so I start them with my drill until I get a new recoil from China. I always keep the drill running until I pull away from the flywheel

[@larrybl]

I went over and watched your other video, Yep I have a notch in mine for a pull rope. I don't think that would have worked well on the first start though.

[@usedmowerpartsusa5977]

I do it all the time no issues. Just gotta know when to pull out!

[@jimdevoe8364]

Good input, winter’s coming

[@StevesSmallEngineSaloon]

It sure is

[@johnbell1859]

Good video Steve Be safe. 🇬🇧

[@StevesSmallEngineSaloon]

Thank You...

[@concretecurt]

The reason you get that kickback may be because your cordless drill has the instant stop . Meaning it actually reverses the polarity on the DC motor to stop when the trigger is released. Then with the inertia from the flywheel /rotating assembly/ and the stator suddenly attempting to be stopped by a 2 lb drill that energy is then continued on torqueing the drill in your hand.

[@howardkoster4026]

Yes Steve! Good point!! As corny as this sounds, it was used in high school way back; SAFETY IS NO ACCIDENT!!

[@professionalidiots101]

Same reason old crank start cars and other stationary engines have a cut out groove to throw the start handle out and off the crankshaft. Many broken hands have happened this way.

[@richardball9116]

I tried to start my snow blower this way . My cordless drill wouldn't turn it over so I got my corded 1/2" drive Millwauki on it. Hanging on with both hands I hit the trigger & it fired a few times, the thing was running faster than the drill motor, this caused the nut to come off in the socket then the fly wheel came off and was spinning around in the fan housing. I gave up at that point. NOT recommended by me. Love you'r show Steve, you are the best.

[@StevesSmallEngineSaloon]

Thank You...

[@SuburbanRedneckGarage]

I've literally been starting my ride on mower with a drill for the last 3 years. I use a corded hammer drill, and a socket. I use it every day on my 20.5 Briggs, and occasionally on my 11 hp Briggs.

[@matthewjenkins1161]

One difference with a generator is once fired, it will immediately run at high speed, unlike your mowers. In North America at 60hz that is 3600rpm and here in the UK a bit slower at 3000rpm for 50hz.

[@garthmcgibbon4285]

Steve at least you able to video getting hurt the second time!

[@skunkjobb]

Never use an impact wrench (nut smacker) fot this. I tried it and it worked a couple of times but then I stripped the woodruff key that keeps the flywheel in the right place. The hole in the flywheel was so mangled that I couldn't even see where the key had been so the whole weed eater was scrap. The key doesn't like the hammering force from the impact wrench.

[@alext8828]

Aren't some of the flywheels left-hand threads? Or did that go out a long time ago?

[@Ecksterphono]

That idea came from RC car starting idea, however RC nitro engine electric starters have a reversing clutch once the RC engine starts. Yikes never direct drive start a small internal combustion engine with an electric drill, you'll snap you wrist in a heartbeat. Learned this back in the 80s and they had the cordless Makita drills back then.