This little video shows you how to easily open any watch screw back - with a £1 tool!
Пікірлер: 48
@TerrapinTrader9 жыл бұрын
Christian is a wonderful man-any advice is from real experience,his service is outstanding and his videos of watch repairs are incredible-the best, absolutely peerless!
@kennyscarborough2508 жыл бұрын
This is just ABOUT the silliest method I believe I have ever seen!
@theRealAV8r10 жыл бұрын
It's hell opening a caseback of some watches for the FIRST time with this method. After the first time it'll never be that tight again. All these ball examples are deceptive - these backs are clearly already removed at least once.
@mikejj697 Жыл бұрын
Amen! I got the special watch back remover mal with the big B on it from Bergeon. It doesn't work! I destroyed the leather straps in a Festina for gripping to hard and couldn't open watches that hadn't been already opened. Buyer beware!
@delick019 жыл бұрын
Just tried this and confirmed it will work. If you don't have a rubber ball with sticky surface, you can always use any small ball and apply tape on it with sticky side exposed.
@pawlawlum10 жыл бұрын
Thanks! I used a skyball, and much to my amazement, it came right off with ease. Leverage + traction did the trick.
@GuitarRandall2711 жыл бұрын
Thanks for the video. This trick works surprisingly well doe most screw back watches. The exception is watches with a two-piece screw back like the Vostok Amphibia. Sadly for the broke horologist, you DO need the tool (or a pair of pliers and a steady hand) to open one of those.
@chrisbow17769 жыл бұрын
excellent. i just used a large half meter across exercise ball to get the grip needed. took 2 seconds to get the back off. thanks.
@16cliffedge9 жыл бұрын
would this work with a submariner ? seems too easy to be true , seems so tight on back of rolex too of course
@BobRooney2909 жыл бұрын
if its factory sealed, this is laughable at best. i have a diesel watch and cant even open it with the screw tool.
@WmJoseSinclair9 жыл бұрын
+BobRooney I FOUND A CENTURY AGO THAT DIESEL WATCHES AREN'T AS EFFICIENT AS STEAM OR WINDER POWERED - I ALSO HAD A HARD TIME GETTING THE FUEL IN THE TINY OPENING
@BeerLeagueGoalieGodfather2 жыл бұрын
Can you use this to tighten it back up reliably? that would be my biggest fear. if you get it open, then what?
@FoliotGuy2 жыл бұрын
Absolutely.
@doingme9838 жыл бұрын
MY TEETH WORKED!
@rendermatt11 жыл бұрын
Guys this didn't work for me at first and I thought it was BS, but keep trying. It eventually worked. Squeeze the ball, hold the watch just like he did in the video, down on the edge of a surface or your knee, and keep trying. Press the ball as hard as you can into the watch
@jonsmith46698 жыл бұрын
Blue or white tack works very well.
@Izzybll9 жыл бұрын
£1 Is about 20 south african rands , you can buy about 100 or more balloons with that here
@PowerSpartanl99Prod9 жыл бұрын
Purchasing price parody in action
@auxmike10 жыл бұрын
Didn't work on my Rolex, it's way too tight!
@GNU_Linux_for_good4 жыл бұрын
neither did mine.
@bricno10 жыл бұрын
Good video works perfectly for me thx
@muffemod5 жыл бұрын
Back was already loose before he started.
@rendermatt11 жыл бұрын
Thanks for the video.
@ethanh27906 жыл бұрын
My watch has nothing to slip a screw in and it doesn’t turn off can someone please help
@rondj196511 жыл бұрын
Exactly. I have a watch that has been opened in at least 10 years. That little rubber ball will NEVER open this watch; especially a ladies Rolex with a thick rubber gasket.
@harrydalton614910 жыл бұрын
I undone it with my hand just twisted it and it worked 😝
@bobdabuildaman11 жыл бұрын
Wish I'd seen this before scratching the hell out of the back of my tag with a jaxa wrench!
@shingnosis8 жыл бұрын
I'll have to try this, maybe some sticky tape or something will do the trick.
@resonant70511 жыл бұрын
I just used the side of a roll of duct tape worked perfectly.
@dragonlady040711 жыл бұрын
Can u post a link to this item on eBay please x
@gustaestb17 жыл бұрын
how to open marc jacobs hatch
@nickv40738 жыл бұрын
Or, you can go on Ebay and spend $2.00 shipped from China on a real case back opener.
@elizia2468 жыл бұрын
shut the fuck up genius
@nickv40738 жыл бұрын
I would expect nothing less from a Ginger.
@rogerwelsh49419 жыл бұрын
Does not work. Many ripoff versions on Ebay.
@elizia2468 жыл бұрын
yes it does you shit for brains
@ChiminoLazcano6 жыл бұрын
Doesnt work
@datdungfdana12 жыл бұрын
u can open a replica with this but not a Genius Watch !
@mazdamps9 жыл бұрын
No way will this work on a watch which is seriously tight! I have the approved tools for the job, and whilst I could open my Accurist with a little effort at the start, there is no way my Diesel is going to open with a "Mickey Mouse" sticky ball!!! How the hell can something, with so much flex do the job, when a heavy duty professional tool can't?
@elizia2468 жыл бұрын
eat shit
@Cooltigerkook6 жыл бұрын
My is way to fucking tight
@JohannesRegnitz9 жыл бұрын
ganzschön viele klicks für son schnöden Uhrendeckel:)
@mnpd311 жыл бұрын
"Any screw back...."?? Not even close. You'll never open a watch with a properly torqued case back using a rubber ball. The only watches you can open are those you know have lightly-threaded backs; usually those you've done yourself.
@NFA_FUBBA8 жыл бұрын
Charming accent
@harrywilly974811 жыл бұрын
This is plain crap, and a waste of money. He already had it loose. rip off