Any clues? When I park the machine for the night...when i come back in the next day I hear that it leaked water all over the hallway floor???? Any ideas? Also...what do most of you use during the winter season... vinegar or Lotox?
@SoutheasternEquipmentSupplyInc6 ай бұрын
Hi there! If your T7 is leaking a lot of water, it is likely a bad solenoid. If it is a small amount, it could just be dripping from the brushes or pads. Regarding your winter season questions, would you mind reaching out to us directly for clarification at ? We look forward to hearing from you.
@Stenuarts52876 ай бұрын
@@SoutheasternEquipmentSupplyIncHi...I'm getting in touch with you regarding what we can use for winter months for salt build up on the floor. We have been lucky up to now as we literally have had no snow!! The previous machine this mall has had they have used vinegar .
@Stenuarts52876 ай бұрын
The previous issue indeed was the solenoid. It was changed immediately and didn't have an issue after it was changed.
@SoutheasternEquipmentSupplyInc5 ай бұрын
@@Stenuarts5287 I hope you saved money by purchasing it from us! 😉
@SoutheasternEquipmentSupplyInc5 ай бұрын
@@Stenuarts5287 For cleaning up rock salt off hard floors: Make sure the floor is dry and start by vacuuming or sweeping as much of the salt as you can. Mix distilled white vinegar and water. Pour this into a spray bottle. Lightly spritz the mixture over the previously salted floors. Let the solution sit for about five minutes, then use your scrubber to scrub and dry.
@jenniferchicago18723 жыл бұрын
If it gets stuck in updating mode. It is emergency button in front burnt out.
@DylanFarstveet Жыл бұрын
Another question, about the brake pedal does it operate like a traditional brake pedal where when you take your foot off the brake it will roll?
@SoutheasternEquipmentSupplyInc Жыл бұрын
Since it's battery-powered, think of it like a golf cart. So no, unless you're on a hill :P
@rickcoyote23614 жыл бұрын
Thank you gentlemen.
@insertgoodname48093 жыл бұрын
For the models with EC H2O. How do you open the "tool box"? (the compartment used on other models for the FaST- PAK ) Does it tilt open form the bottom or top?
@SoutheasternEquipmentSupplyInc3 жыл бұрын
Send us an email at service@southeasternequipment.net and we'll show you in the Operator's Manual where this information is located. You can also call Tennant tech support at 800-553-8033
@Stenuarts52877 ай бұрын
Water not being dispensed onto the floor???? Helpppp.
@cleewalpool7499Ай бұрын
Does the machine need to be on or off for the machine to charge
@SoutheasternEquipmentSupplyIncАй бұрын
Turn the machine off before charging.
@mariyatsankova15037 ай бұрын
Прекрсна машина! Кара се много ,лесно на 😂😂
@SoutheasternEquipmentSupplyInc7 ай бұрын
Ние сме съгласни!
@jasenbach27932 жыл бұрын
Any way I can drain the clean water tank ? I put a cleaning gel in it and too much came out. It’s clogging I think.
@SoutheasternEquipmentSupplyInc2 жыл бұрын
Hi Jason, start the video at 19:45 to see how to drain the clean water solution tank and let us know if you have anymore questions or concerns.
@sagardenge12006 жыл бұрын
can I get the animated video of this machine
@dorotheachristian2712 жыл бұрын
How often do u need to change the blades on the rideon
@SoutheasternEquipmentSupplyInc2 жыл бұрын
Hi Dorothea, when the squeegee blades start to streak, leaving water behind you can flip them over and use the other side. After that, it's time to replace! Call our Parts Team at 803-252-0100, Option 2.
@robertbrewer58822 жыл бұрын
how do you program the routes
@SoutheasternEquipmentSupplyInc2 жыл бұрын
Hi Robert, it sounds like you may be referring to the Tennant T7AMR Scrubber which is the robotic version of this machine. The T7AMR Scrubber can be used in manual mode or as self−driving, robotic scrubber. For information on how to start programming routes, watch this video: kzbin.info/www/bejne/j33OgJmVl7igebM
@takingecho18236 ай бұрын
can you show the T12?
@SoutheasternEquipmentSupplyInc6 ай бұрын
Couldn't find a great video for the T12, sorry! If you want a copy of the OM, email us at
@Mike-su8si2 жыл бұрын
Im asking for a buddy How do you fix the steering column just above the chain gear on the steering column the steering wheel spins in a complete circle and its missing a sleeve part or something that holds up the steering column and chain the steering column is loose broken i know its missing some kind of part that fits over the column and it holds the chain up in place. The whole steering column falls down causing the chain to come off the sprocket that's on the steering column it doesn't wanna stay up and in place the user manual isn't much help it all i don't work on those but checked my buddies out before i work on riding mowers I'm not no professional at fixing anything But I pointed out to him what part that floor machine might need because of its broken loose steering column it needs a sleeve over it so if that doesn't help him he'll have to call the t7 shop for further help
@SoutheasternEquipmentSupplyInc2 жыл бұрын
Hi Mike, have him call Tennant Tech Support at 800-553-8033 or email and we can have a technician come take a look. Thanks!
@DylanFarstveet3 жыл бұрын
We have this at Walmart can anybody operate this or is it only for maintenance personnel?
@SoutheasternEquipmentSupplyInc3 жыл бұрын
It's recommended that only trained authorized personnel operate equipment like this. That includes watching and comprehending this video as well as familiarizing yourself with the Operator's Manual. To ensure safe and proper use of the machine, someone already trained should inspect operating procedure of a new employee. For a copy, email us at service@southeasternequipment.net.
@pentiummmx22943 жыл бұрын
its the same for if someone wants to operate a forklift or motorized pallet jack. training and certification is required.
@lamontgray60152 жыл бұрын
@@pentiummmx2294 training yes cert not not all the time
@graullas898111 ай бұрын
Meanwhile me at first day of work: gas pedal is here, breakes are here but they don't work well. Click a big green button and we are set to go. Hurry up we have entire mall to scrub today! Lol
@silentdestroyer5 жыл бұрын
How do you flush the solution supply lines? I’m getting very little water on the left side of the scrubber, and after having cleaned the filter, and changed the pads, I need to try this next but don’t know how.
@abdielernesto90513 жыл бұрын
i know im asking the wrong place but does any of you know a way to log back into an Instagram account?? I was dumb lost the login password. I would appreciate any assistance you can offer me!
@briggsasher54783 жыл бұрын
@Abdiel Ernesto Instablaster :)
@abdielernesto90513 жыл бұрын
@Briggs Asher Thanks so much for your reply. I found the site through google and I'm trying it out now. I see it takes quite some time so I will get back to you later with my results.
@abdielernesto90513 жыл бұрын
@Briggs Asher DAMN IT ACTUALLY WORKED :O Literally hacked my Instagram account after about 30 mins by using the site. Had to pay 15$ but for sure worth the price :O Thank you so much, you really help me out!
@briggsasher54783 жыл бұрын
@Abdiel Ernesto no problem :)
@dylanexton87685 жыл бұрын
Anyone know how to turn the back up alarm off? We accidentally turned ours on at work and have no clue how to shut it off.
@crisalforma5265 жыл бұрын
• Put directional switch in Reverse • Press & Hold Horn Button • Turn key switch ON • If Back-up Alarm is silent, Hospital (Quiet) Mode has been selected • If Back-up Alarm is sounding, Normal mode has been selected • Cycle key switch OFF, then ON again • Verify correct mode has been chosen
@darrellcole60703 жыл бұрын
Lol
@devilishdollie Жыл бұрын
Sooo why is this machine so loud? We got to demo the automatic driving one, and it was very quiet. Much quieter than our advance machine. But when our regular tennant T7 finally arrived it was very loud. Why?
@SoutheasternEquipmentSupplyInc Жыл бұрын
Hi there, that's a tough one to answer without more information. If you ordered the machine from us, please call your Account Executive at 803-252-0100 so we can address this concern. Otherwise, you can contact the distributor you purchased from, or speak with a technician at Tennant if you believe this is a mechanical issue. Their number is 800-553-8033. Thanks!
@palosrobinson61902 жыл бұрын
water is not coming out while scrubbing. anyone know how to fix this?
@SoutheasternEquipmentSupplyInc2 жыл бұрын
Hi Palos, if you need a copy of the Operator's Manual or to schedule a site visit, email us at