How to Overclock and Undervolt an AMD GPU (2021) (RX 6800 XT as demonstration)

  Рет қаралды 190,798

Daniel Owen

Daniel Owen

Күн бұрын

Пікірлер: 323
@Generic_Ninja
@Generic_Ninja 3 жыл бұрын
Thanks, I have been watching your content for awhile but your recent 6800 XT videos have been truly useful as I just traded my 3080 Tuf for an Asrock Taichi 6800 XT. Getting used to tuning AMD has been fun.
@georgiodavid
@georgiodavid 2 жыл бұрын
Welcome to 110c junction temp club.
@RuShMaShiNe
@RuShMaShiNe Жыл бұрын
Did you undervolt your taichi? How is it going?
@collinschafer8454
@collinschafer8454 Жыл бұрын
Once you undervolt and crank the fans to 80 your junction should be around 75 to 80c
@AdrianMuslim
@AdrianMuslim Жыл бұрын
​@@collinschafer8454What do you mean by cranking the fans to 80? What value/unit is that exactly? And won’t cranking the fans reduce fans lifespan?
@werewolfmoney6602
@werewolfmoney6602 Жыл бұрын
​@@AdrianMuslim he means 80%, and as long as the fans aren't running at 100% at all times it won't shorten lifespan
@10GreenDragon10
@10GreenDragon10 3 жыл бұрын
Powerful built-in software! I think the idea of this came in the RX580 era, it's now more mature and very useful tool overclocking has never been much easier than this.
@THEpicND
@THEpicND 3 жыл бұрын
I love undervolting. Cooler card, more efficient (kicks less heat out into the room), same or faster performance. When I had a rx570 in an oven of a case undervolting increased its performance by 20%
@forog1
@forog1 3 жыл бұрын
Same here! I do it to both my CPU and GPU my 3060 consumes 130w down from its stock 170w. max temp 49c on air was 53c.
@nikolajlarsen6258
@nikolajlarsen6258 3 жыл бұрын
When I ran my vega 56 it undervolted really well... That along with memory OC (hbm2 overclocks really well) game around 10-15 extra performance. Then tuning the fan curve to kick in earlier at low speed actually ment that the temperature would never really get high enough to raise fan speed
@ShanyeSoT
@ShanyeSoT 3 жыл бұрын
Have you tried an open case design? In some cases, that can drop temps by up to 10° or so.
@rylanwill6969
@rylanwill6969 3 жыл бұрын
@@ShanyeSoT thats what I'm planning or I don't know why people haven't done this a wind tunnel like case with a dry air cooler or air-conditioner and then andthe side closer the the hardware itself a another vent /fan to pull out the the stagnet or extra hot or col air to keep a unrestricted flow of cold air I mean not very safe but under the right Temps and with the right set up I think you could keep your pc chilly ash with some minor alterations to a cupboard or stand all you reall need is along cardboard box and tin foil or white paint since black absorbs heat another thing iv thought are white pc cases keep stuff colder then thought about it but white reflects and relases heat fast as it can't hold it there fore allowing the air-conditioned and fan to suck up all the heat and just keep a kcoe cold endearment if you made a gladd you could make a little thingg like an aquarium or indoor garden but use separate room within the encloser to ensure your not qcukty damaged the pc but have se nice scenery around it imagine the air conditioner makes alot of air so you can have some.mono bush's or trees and they would wave abit as you play get I don't know I'm think about ways to improve the design but an open type case is what I want becuz 1 free 2 easyer 3 colder lmfao
@ShanyeSoT
@ShanyeSoT 3 жыл бұрын
@@rylanwill6969 Uh... First thing's first, black doesn't absorb heat, it absorbs light. Second, unless that all sounds really fun to you, it's probably not going to be worth your time and you're sacrificing so much space and cosmetic value. Not to mention, you'd sound like you're in a NYC laundromat to everyone you talk to through the mic lol. Maybe just try liquid cooling instead?????
@higgz17
@higgz17 3 жыл бұрын
literally ,was doing this yesterday! I keep finding videos in your channel of stuff im either thinking of or doing. Amazing!
@JohnSmith-gh9fq
@JohnSmith-gh9fq 3 жыл бұрын
I also have the 6800XT and a 650 watt power supply. I tried it out with your setting straight after watching the video and it worked! Good job!
@A_Person1601
@A_Person1601 Ай бұрын
Just ordered a 6800xt with the same power supply. Have you had any issues with power draw? Also what’s your cpu? Thanks, feeling anxious
@JohnSmith-gh9fq
@JohnSmith-gh9fq Ай бұрын
@@A_Person1601 I have used 6800xt with 650 watt power supply for nearly 3 years with no issues at all. My cpu is i5 10600k.
@gunnerr8476
@gunnerr8476 25 күн бұрын
​@JohnSmith-gh9fq How's your PC before undervolting? It is good with 650w PSU. Obviously I'm going to undervolt too.
@A_Person1601
@A_Person1601 24 күн бұрын
@@gunnerr8476 I got the 6800xt and actually didn't need to undervolt! I get perfectly fine performance, but keep in mind I play on 1080p so my GPU may not be as stressed as it might be otherwise.
@bartdierickx4630
@bartdierickx4630 3 жыл бұрын
Also love the AMD driver software. Came a long way compared to the old crimson drivers. I just use the auto undervolt feature.
@bobbymiller5297
@bobbymiller5297 3 жыл бұрын
How do you use the auto undervolt feature
@Premises187
@Premises187 2 жыл бұрын
@@bobbymiller5297 Go to the tuning tab. He shows you here 0:48 . Performance > Tuning > Undervolt. Clicking *undervolt* will apply an auto undervolt. You can undervolt further than the auto value, but you'll have to do some stability testing
@bobbymiller5297
@bobbymiller5297 2 жыл бұрын
@@Premises187 thank you. That worked and I also did the radeon chill.. Because this gpu puts out some heat plus my cpu does and it's cooking me out of my room
@Mark3rz101
@Mark3rz101 3 жыл бұрын
AMD is doing better in software now. I'd love to see you get a Ryzen CPU to enable SAM/re-size Bar. That tends to give you a boost on top of your oc/uv.
@Zorro33313
@Zorro33313 3 жыл бұрын
the "bad radeon drivers" myth was born amid AMD's clusterfuck years, when RTG had near 0 funding. Now situation is massively different, so i think future is pretty bright for Radeon software team.
@mrwashur1991
@mrwashur1991 3 жыл бұрын
Im pretty sure intel supports SAM/resizeable bar. As far as I know its a feature thats always been there but AMD was the first utilize its performance.
@tadsnyder2756
@tadsnyder2756 Жыл бұрын
Intel does but the motherboard has to support it mine does not 😢
@xontu619
@xontu619 Жыл бұрын
I have a b660 + 13500, I do have resize bar option
@izidor
@izidor 3 жыл бұрын
7:47 If you increase your memory Frequenzy its quiet possible that your game runs slower in the end, because if you increase the slider you also automatically incraese your Vram Timings. So its possible that a game works a lot better with Timings than with Mhz. Most people i know tend to use 2124 Mhz. It seems to be the best balance between Frequenzy and Timings.
@SwedishLatino
@SwedishLatino 3 жыл бұрын
Interesting, thank you for the tip gonna try 2124!
@izidor
@izidor 3 жыл бұрын
@@SwedishLatino id like to post a link but youtube will insta delete my post then, so just look for it urself =)
@ALECtomoveit
@ALECtomoveit Жыл бұрын
quite* not quiet. Quiet means hush.
@voice5sur5
@voice5sur5 Жыл бұрын
I use 2112 just because it offsets by 12 so if i select 2100 it ends up 2088 which triggers my OCD 😂 2112 ends up 2100
@darreno1450
@darreno1450 3 жыл бұрын
Totally agree on the software. I've owned Nvidia cards and IMO, their interface is outdated by comparison. I also got better results with the AMD overclock tool than MSI afterburner.
@neilstack4194
@neilstack4194 3 жыл бұрын
Glad your card is compatible with overclocking and Undervolting in RDR 2 etc... Love the 8.56 "Funzies"
@danielowentech
@danielowentech 3 жыл бұрын
The problem with the 2.6ghz and beyond is that my temps and fan noise get too high so I dont keep those settings. I need a better case. I had my glass side panel open in this video to keep temps down. They are much worse with it on. In normal use I just undervolt with fast timings and a small OC to keep the fan quiet.
@neilstack4194
@neilstack4194 3 жыл бұрын
@@danielowentech yea it's the usual compromise of fighting to keep the temps down. Short of using liquid nitrogen, ie a Steve Burke job, you need a expert super airflow cooled case with quiet fans!
@danielowentech
@danielowentech 3 жыл бұрын
I'll just toss some ice water on it from my water bottle. That should help keep it cool.
@neilstack4194
@neilstack4194 3 жыл бұрын
@@danielowentech ha ha become a comedian as well as a math teacher multi skilled
@nikolajlarsen6258
@nikolajlarsen6258 3 жыл бұрын
Just for clarification, if you increase the powerlimit the power consumption will go up regardless of undervolting. Undervolting will then just make it able to draw a higher current within the same power envelope. edit. not a cretisism, since i really enjoy your videos which i find very informative. I love the way it's based around your own system rather than showing a whole lot of benchmarks. I'ts good to have someone talking honestly about benefits and shortcomings on one specific system.
@spitfire1789
@spitfire1789 Жыл бұрын
yes but the power limit doesn't mean it draws that much power all the time, only when its needed. so most of time when it's not needed, it runs on a lot less power.
@Fezzy976
@Fezzy976 3 жыл бұрын
Great video. Finally someone praising the AMD software rather than people bashing it who more than likely never used it. Also a good tip is to try and raise your min GPU clock in GPU bound games. Like RDR2 setting your min GPU clock speed to around 100-200MHz lower than your max can really help eliminate some stutters or clock drops you can get otherwise. I would only set this on per game basis and not globally. For instance I have a min clock speed of 2400MHz and a max of 2600MHz. It does drop below 2400MHz in some cases but 95% of the time during a game it stays around the 2500MHz range. This doesn't play well with undervolting though.
@gertjanvandermeij4265
@gertjanvandermeij4265 2 жыл бұрын
AMD/Radeon 'bashers' are just hard headed Intel / Nvidia fan GIRLS ! 🤣
@Fezzy976
@Fezzy976 2 жыл бұрын
@@gertjanvandermeij4265 Not all of them are. Nvidia and Intel both have great products and software. Being a fan of a corporation that doesn't care about you is not the way to go about things.
@makisekurisu4674
@makisekurisu4674 2 жыл бұрын
wish they had a apply OC at startup option. My gpu keeps getting reset thanks to all the power outage in my area
@PeteJonesViciousKid
@PeteJonesViciousKid 2 жыл бұрын
I struggled with the undervolt too.. I use a Sapphire Nitro+ 6800xt. I had my clocks at 2700-2600MHz but the temps were at 90-100c, dropped volt from 1150Mv-1000Mv but no volt was really stable. Left mine at 1150mv, and dropped the clocks to 2500-2400MHz. set a maximum frame rate of 144, and its beautiful 80c tops, average of 60-80. Like you say, set the OC to each game and not globally. But I do think with a liquid block, I can push mine to 2700. Also on the new 6950x its unstable to use fast timings on VRAM...
@mikeyh4157
@mikeyh4157 4 ай бұрын
What an excellent tutorial! Having just move over from Nvidia to AMD this was exactly what I needed, to be able to navigate through and locate all those AMD setting and optimise my XFX MERC 319 RX X6600 XT. Thank you Daniel
@JohnnyHughes1
@JohnnyHughes1 2 жыл бұрын
I have a Ryzen 5800X CPU on an ASRock X570 Phantom Gaming 4 Motherboard and an ASRock Radeon RX 6800 XT Phantom Gaming D 16G OC GPU. The Adrenalin Edition graphics drivers (and software) coupled with Ryzen Master and the AMD x570 chipset drivers make overclocking and undervolting both GPU and CPU fairly easy. I was using only Intel CPUs and NVIDIA GPUs for several generations prior to my upgrade these componets. Tweaking both graphics and CPU have never been easier.
@posmoo9790
@posmoo9790 2 жыл бұрын
I spent a week figuring out an 6900xt toxic le and some powercolor models this is what I found works best. 1. I used superposition at first because that's a quick test of like 4 minutes. 2. test using different memory clocks. most of these cards do better the higher you go, but not all, including mine. mine does best at 2100mhz. save that profile. 3. then test the memory timings. see if fast or default is faster. save over the same profile 4. move on to the undervolt. using 20-30 mv increments decrease the voltage until it no longer increases or your scores start to drop. save over the same profile at the best mv level. 5. now to power. increase the power percentage 1-2% increments but you can start near 108% bc most of these can do at least that. some keep improving all the way to 115% but some stop earlier and you'll just be wasting watts of yours is one of those. then you have your best settings. save that profile. I ussually go over to timespy then and see if any tweeking helps. got both the red devil and toxic to over 22000 on timespy. the toxic has the better gpu the red devil I has better memory though.
@ownzies100
@ownzies100 2 жыл бұрын
When you say "test using different memory clocks" and mention that you use 2100mhz, are you talking about GPU clocks or VRAM clocks? If vram, are you not adjusting GPU clock? If GPU, are you not adjusting memory clock and only changing timing?
@posmoo9790
@posmoo9790 2 жыл бұрын
@@ownzies100 GPU clock first. At the end I'd boost the memory.
@sunny113866
@sunny113866 3 жыл бұрын
Wow! Was waiting for your experience with overclocking this card. Nice! I just Subscribed!
@joulukinkku
@joulukinkku 3 жыл бұрын
Wow, i did this and temperatures lowered around 10°c and gain some performance too! No need to limit fps anymore to lower temps!
@Pedro-uh2bn
@Pedro-uh2bn 10 ай бұрын
Mine too it's sick
@peterkolesar4020
@peterkolesar4020 9 ай бұрын
I only klicked on this video to see how undervolting goes in this new AMD app because last time I used Radeon card was RX470 and the app sucked back then. Later I used Afterburner to set up curve, power draw and memory clock on my GTX1070 and it was superb, more performance and waaay cooler. However now that I am on the 6800XT and the time came for undervolting again I was curious if I can do it in the AMD app and your video presented it perfectly. Good job!
@WybornD40
@WybornD40 Жыл бұрын
I really appreciate this, I recently got a 6800xt but for whatever reason it was massively under-performing, like, 30fps in RDR2 at 1440p and barely cracking 50 even with the lowest possible settings, I'm going to follow this guide and hope that it helps get it to the performance it should be at to hopefully avoid the hassle of a return.
@danieleduardo8767
@danieleduardo8767 Жыл бұрын
Hi pal, hope you doing great, I’m really curious how that went, did the gps went up? I hope they did
@WybornD40
@WybornD40 Жыл бұрын
@@danieleduardo8767 ended up reseating it, and reinstalling windows, that with a slight overclock got me up to normal performance.
@garethsutherland9649
@garethsutherland9649 11 ай бұрын
Hi m8! Hmm that sounds weird for a 6800xt. I have the xfx rx 6700 10gb non xt and 1440p RDR2 i sit around 70-90fps (with some lower shadows etc) Did u check ur graphics settings? Ray tracing etc? What cpu do u have? You should not need to overclock anything on that card to get normal performance :)
@WybornD40
@WybornD40 11 ай бұрын
@@garethsutherland9649 I have a 12600KF paired with 32gb ddr5 6000Mhz CL 30 RAM, but I fixed the issue, I reseated it and did a fresh windows install and for whatever reason that fixed it. Now up to the normal performance lol mainly went to OCing since I read a good amount of people with underpreforming 6800xts that got their performance up to normal by OCing
@AG-qg7cl
@AG-qg7cl 3 жыл бұрын
Exactly what we talked about yesterday. Great video love your content
@crusader6627
@crusader6627 13 күн бұрын
Does resizable bar or SAM and overclocked gpu can cause crashing?
@Brunnen_Gee
@Brunnen_Gee Жыл бұрын
Thanks for this vid! I haven't messed around with overclocking in several years, and this newer Adrenaline software is all new stuff to me (used to just do everything in Afterburner). I also have a 6800 XT, I'm going to start messing with things right now.
@BBattury
@BBattury 3 жыл бұрын
you are my type of videos i LOVE THESE VIDEOS please keep it up :DDD
@cptwhite
@cptwhite 2 жыл бұрын
Nice overview, thanks Daniel!
@chrissmith6653
@chrissmith6653 3 жыл бұрын
Ahh what a dream! My Powercolor Red Dragon 6800XT cant even run 1050mv at 2000mhz let alone 2500! It's nice to see that a lot of people can overclock/undervolt but for me its a case of being happy it works at stock!
@jacksheldon8566
@jacksheldon8566 2 жыл бұрын
i have the exact same card. noisy as fuck. but i could do like in the video and still lower that f*** noise by at least half and gained at least 4°c. tested on totalwar warhammer3. dumno if it will be stable in the long run but so far so good. try to do all the changes in the video (keep the gpu frequency at 2500, not 2600) all at once! (do'nt change one thing after another.) then apply. see if it still work. if not please tell me in what game it did not. (or if it crash randomly even on desktop)
@gertjanvandermeij4265
@gertjanvandermeij4265 2 жыл бұрын
I'm smart enough, *to keep my PC in my cellar* ( where it it much cooler ) and ramp up the speed on the GPU fans to 90%. And with that, I have an agressive OC on my Radeon 6700XT ( up to even 15% in some games ) . I just run an display and USB (extension) cable to a splitter to my room, for my keyboard and mouse, etc. and an selfmade on/off button. There is also an AC unit in the cellar, so everything runs pretty cool ( everything UNDER 65 degrees C ) while having massive overclocks, on my GPU and Ryzen CPU ! And NO noise in my room above ! I love this setup !
@Meepster_836
@Meepster_836 2 жыл бұрын
Cloud gaming sevices are shaking and crying right now
@computerbytes01
@computerbytes01 10 ай бұрын
Thanks mate - I completely forgot about these settings. I just wanted my 7900XTX to STFU with its massive cooler, and every review saying its quiet card. Actually getting a few hundred points extra in 3DMark with lower voltage, lower clock speeds and a better fan curve.
@SwedishLatino
@SwedishLatino 3 жыл бұрын
Great video as always Daniel! Just to share, I usually under volt to 1000 and still get same performance as you from what I can see, but with around 150-200W tops. Fan speed at 1500rpm and gpu at 50-60C due to the undervolt. MSI X trio 6800xt here so all cards are different right! Cheers Edit: tried on new 1440 ultra wide from 1440p and have mostly same stats as you but a quite cooler. Just lowering volt to 1000-1010 (if stable) should do the trick for 10C+- cooler gpu for 5ish fps less, more importantly so for its longevity
@RafaelMarcosAderaldo
@RafaelMarcosAderaldo Жыл бұрын
Could you show us your print screen setting on imgur? I have a red devil and I'm new on amd, does not know how to configure my fans and other stuff.
@sparketech
@sparketech Жыл бұрын
I simply under volt my GPUs. Thanks you for the guide, fact is with Nvidia being greedy more people are likely going to see this video again looking to get the best temps and performance The Fast memory setting is sweet to have, would have never noticed it anytime soon if it wasn't for your video.
@tobytoxd
@tobytoxd 26 күн бұрын
Great video, thank you very much!
@ZanSunstrider
@ZanSunstrider 2 жыл бұрын
Amazing guide!! just switched from long time Intel + Nvidia user to All Red team now! so exited to explore more on AMD stuff!! +1 sub for you! :)
@marcelkekec
@marcelkekec 3 жыл бұрын
your content is awesome, thank you!
@reikonatsumi4957
@reikonatsumi4957 3 жыл бұрын
I have 3080 and now I have msi 6800xt for my other build and I can definately say that amd's software is very basic and very EASYYY to use
@TerraWare
@TerraWare 3 жыл бұрын
I always leave the power tuning maxed out at 15%. It just means the card will use it if it needs it. I've heard you get better results by setting you minimum frequence 100 mhz less than your max. Lastly all cards are a bit different. For example my Strix 6800 XT will OC to 2.75ghz but the sweet spot seems to be 2.65ghz max/2.55ghz min. Using Time Spy graphics score is a good way to tune your card and the Demo of 3D Mark has Time Spy for free on Steam it's how I got it. There is decent performance to be gained with all RX 6000 cards by overclocking.
@danielowentech
@danielowentech 3 жыл бұрын
I never bothered on my 2070 because the performance gain wasn't noticeable enough for the increased fan noise, but this 6800xt actually makes some noticeable performance gains and the undervolt helps keep the temps down.
@dimwillow7113
@dimwillow7113 3 жыл бұрын
TIme spy good for stable min settings and power but not for max frequency. If you set your max freq after time spy you will loose performance in games that isnt as heavy on the load,..for example Warzone.
@alpha13sierra
@alpha13sierra 2 жыл бұрын
@@danielowentech one good tip would be to use the 100 MHz min-max frequency difference in more demanding titles or when you want a stutter-free gaming experience. Also it’s best when this is used together with Radeon Chill (like you pointed out). Otherwise, leaving the lower frequency at stock for non-demanding titles won’t affect your gaming experience, but will save you the wasted power consumption and give you better thermals.
@beandeh
@beandeh 2 жыл бұрын
I actually got a 6900 xt running on a 650w corsair and no problems. However because it is advised to run on 850w psu so i bought a 1000w psu and got major coilwine. So with the help of this i will try to undervolt to minimize the annoying coilwine! Thx
@matthewshort4780
@matthewshort4780 2 жыл бұрын
This helped so much! I got around 10 fps more performance!
@valerfor8361
@valerfor8361 3 жыл бұрын
RDR2 went from 81 FPS to 90 FPS & this is over an already factory OC card (2350 instead of 2250 MHz), all-in-all quite an impressive result, I would say! And the best thing? The Watt counter only went up by 15 Watts max (2500 MHz).
@ItsJustVV
@ItsJustVV 3 жыл бұрын
True, he seems to have a good silicon on that GPU, although to be fair he needs to stress test it with 3D Mark Time Spy. I found out that my +10% OC (like he has here) is actually crashing hard in that test and only a +5% OC is stable on my RX 6700 XT, so that was a bummer. Also how is this OC-UV cooler when the stock actually runs at 66C and the OC-UV at 68C? Is no one noticing that? Just look at the end of the video when he switches back to default the temps actually go lower...
@danielowentech
@danielowentech 3 жыл бұрын
When my thumbnail says faster and cooler it means OC makes it faster, UV makes it cooler. If you push the OC too hard it isn't cooler than stock, but it is much cooler than trying to run that OC without the UV. I actually can get it both faster and cooler than stock if I do the UV with a smaller OC and faster memory timings.
@ItsJustVV
@ItsJustVV 3 жыл бұрын
@@danielowentech Alright. Have you tried that stress test in 3D Mark Time Spy? That's the test that makes or breaks an OC/UV as I found out, more than Heaven, Superposition, Furmark or any other systematic test or game test. If it passes that, then the GPU tuning is rock solid stable.
@denniskarlsson6173
@denniskarlsson6173 2 жыл бұрын
Here for the undervolting part ^^
@josu91ita
@josu91ita 2 жыл бұрын
One question Daniel, how to use the radeon performance settings and the MSI metrics without conflicting each other ?
@marramgg
@marramgg Жыл бұрын
Great video. Think of the folks watching on mobile. We can’t read anything in the screen. Get some magnification tool that shows a zoomed area around your cursor to show what you’re doing. Improves legibility on the phone. Thanks again.
@Hybred
@Hybred 3 жыл бұрын
Do you use radeon image sharpening?
@danielowentech
@danielowentech 3 жыл бұрын
I havent yet actually.
@Hybred
@Hybred 3 жыл бұрын
@@danielowentech Depending on resolution and your preference 20-80% is a good range to try it at, as someone who went back to NVIDIA it was very hard to do without RIS, it gave my games a huge quality boost so I really recommend experimenting with the values and see if it's for you
@VargVikernes1488
@VargVikernes1488 3 жыл бұрын
@@Hybred You can use literally the same sharpening algorithm they've stolen from AMD in Nvidia Control Panel.
@Hybred
@Hybred 3 жыл бұрын
@@VargVikernes1488 I'm pretty sure its different, one sharpens the entire image or different parts but AMDs CAS is the best sharpener out there which you can use in reshade but 1. Reshade doesn't work with every game and 2. Reshade CAS has a performance hit whereas AMD's RIS does not
@VargVikernes1488
@VargVikernes1488 3 жыл бұрын
@@Hybred they are the same algorithm. Nvidia added it week after AMD released it as open-source code. Don't believe me? Use your eyes. I had gtx 1080, used Reshade, then switched to freestyle filter in Experience week later, and in a month to control panel, after they added it there too. Now I have 6900 XT and I can tell there's 0 difference between them. If anything, Nvidia's solution is better, because you can set the level of small detail to ignore (film grain slider) and you can have even higher level of sharpness than with AMD. Both filters manage to avoid having black borders around objects unlike primitive sharpness filters such as one that's used in RDR2.
@gametime2473
@gametime2473 Жыл бұрын
Sweet just got a great deal on an XFX 6800. I always undervolt my cards to get equal performance with less heat.
@Format314
@Format314 2 жыл бұрын
Great video! Quick questions: 1. Why not set the minimum clock to 100 below max? 2. Does custom fan settings in Adrenalin affect just the gpu fan, cpu fan, case fans or every fan in the case?
@kamikazee2239
@kamikazee2239 2 жыл бұрын
I agree with #1 always do this, as for your #2 No it only effects the GPU fans.
@Kirbeleg
@Kirbeleg Жыл бұрын
Why the first?
@ezoez7548
@ezoez7548 4 ай бұрын
THANK YOU SO MUCH!!!!!! You helped me fix my fps in fortnite!!!!! Im finally getting 120 fps in high 😭😭😭 even fixed the stuttering
@user-sam_drake
@user-sam_drake 2 жыл бұрын
It's really works, thanX!
@ammartech3660
@ammartech3660 3 жыл бұрын
Awesome video, Been watching your channel for quite a bit now, and definitely subbed ! BTW, Isn't the minimum frequency works with max frequency ? like for example, minimum 2450, max 2575, while having max power limit; the card will have that range to run the core clock speed? Excuse my dumbness, As I still dont own AMD GPU " yet " 😀
@danielowentech
@danielowentech 3 жыл бұрын
I won't claim to be an OC expert, I just know the basics and people have been asking dor a video. I didnt mess with the minimums and my card seemed to hold high clocks without issues so I left it alone. Perhaps messing with the min could help even more.
@ammartech3660
@ammartech3660 3 жыл бұрын
Its all good man. Glad you did made a video about it 🙂
@chriswright8074
@chriswright8074 3 жыл бұрын
@@danielowentech look into amd chill as a next video
@InsaniousTV
@InsaniousTV 3 ай бұрын
That's why i love AMD you just made your uv profile and you are ready to go. My temps are 60degress for gpu and cpu. Cold as f**k :)
@erikhoel6081
@erikhoel6081 5 ай бұрын
A few years later; How much do we love AMD adrenalin today?
@NipahAllDay
@NipahAllDay 3 жыл бұрын
I like overclocking. I have the 6900 xt powercolor ult version. My card can go up to 2750 hertz and gain 20-30 FPS against some 6900 xt in some areas in RDR2. With the in game benchmark, the average FPS was 110-117 with max settings. (1440)
@Kuroganemk2
@Kuroganemk2 3 жыл бұрын
I'm looking at a 6900 xt red devil, think its a good card vs a 3080/3080 ti? How is it for you on 1440p?
@NipahAllDay
@NipahAllDay 3 жыл бұрын
@@Kuroganemk2 pretty good. From my experience, my 6900 xt can go 2750 MHz. With that, it’s pretty good against both 3080 ti/3090 in rasterization. It can beat both of them in a majority of games at 1440p. In most games, my card can get me at least 110-120 or more frames. Demanding games/areas can get around 90. Granted, if you get the regular xtx cards, its overclocking and overall performance is not as good as the xtxh cards. I’m fairly certain you can still get similar performance tho. So basically, I recommend the 6900 xt.
@wolfram6583
@wolfram6583 3 жыл бұрын
I have a Reference 6900 XT so I probably don't have as much headroom as yours with the Reference's shitty air cooler, but I'm still surprised how well the 6900 XT overclocks.
@braukwood925
@braukwood925 2 жыл бұрын
Fantastic video man
@SinnfullDuck
@SinnfullDuck Жыл бұрын
I've had a hard time undervolting and overclocking. I can set the sliders to 1000mv and 2600mhz but when you actually look at what you're getting, it doesn't undervolt. Even when set at 1000mv it just runs at 1150 anyway. Not sure why that is but it happened in this video as well.
@christianheick303
@christianheick303 Жыл бұрын
Hmmmm
@Syphirioth
@Syphirioth Жыл бұрын
I not sure where I read or saw this but I guess that is because above certain amount of Mhz it will automaticly put more volt. So I was told to keep the clock under 2500 so 2499 on a 6900xt. That way it should not kick in the high voltage. But i dont remember where i saw
@xNaha
@xNaha Жыл бұрын
can confirm, above 2500MHz it automatically jumps to like 1140-1150mV, above 2570 to stock 1175
@Usumariu
@Usumariu 7 ай бұрын
Hi, i read on the internet that you need mpt to undervolt/oc gpu, is that true? what is the difference between using mpt or the wattman software? thank you
@scottbirkinshaw2009
@scottbirkinshaw2009 2 жыл бұрын
Why no Resize bar?? SAM?
@bluebird0222
@bluebird0222 2 жыл бұрын
Which AMD software is this? I like it. It's simple. Was this in 4K Ultra?
@-eon2754
@-eon2754 3 жыл бұрын
thank you,it a good overclock for my 6800xt xfx merc319
@shaoyam3201
@shaoyam3201 4 ай бұрын
Is he playing on 1080p or 1440p? Thanks
@Владимир-я1з5ш
@Владимир-я1з5ш 2 жыл бұрын
Thanks for detailed and entertained guide for overclocking via AMD software.
@kenjikawakami8033
@kenjikawakami8033 2 жыл бұрын
I know this is from a while ago, but I’ve heard that using multiple performance metrics apps causes race conditions which affect the results apparently
@josecabre1
@josecabre1 Жыл бұрын
Will lowering the power limit help mitigate the transient spikes?
@Sp3cialk304
@Sp3cialk304 Жыл бұрын
Love a little undervolt and overclock. Got my non xt Rx 6800 in the top 2 percent of 6800s on time spy. It is actually scoring higher than over half over Rx 6800xts tested on time spy. Pretty crazy how well these cards undervolt and OC.
@asnadwitama
@asnadwitama Жыл бұрын
can u share your setting man?
@itaintthatdeep4755
@itaintthatdeep4755 Жыл бұрын
Share the settings lol
@TheRealOne2077
@TheRealOne2077 Жыл бұрын
Share your settings
@Sp3cialk304
@Sp3cialk304 Жыл бұрын
@@TheRealOne2077 turned power limit all the way up, undervolted to 960mv. GPU clock min is 2300 max is 2400 (you can go a little higher than this, but it's not worth it IMO). Turned memory clock speed to 2112 and enabled fast memory. All done in adrenaline software. Turned off zero rpm mode. Gets great performance and stays at 60c when gaming.
@TheRealOne2077
@TheRealOne2077 Жыл бұрын
@@Sp3cialk304 Damn, guess I should try that out. What is your fan curve btw?
@Vespyr_
@Vespyr_ 2 жыл бұрын
How is your scaling so small for your windows? I'd like it to look like that.
@Cesar.Duarte_II
@Cesar.Duarte_II Жыл бұрын
Does anyone know how to save the tune so that it loads up automatically
@corvusgaming1577
@corvusgaming1577 Жыл бұрын
If the tuning doesnt remain after a pc restart this means it was not stable
@dazeen9591
@dazeen9591 Жыл бұрын
Are the tighter memory timings safe to use? Will that degrade the memory controller of the GPU ?
@donalgodon
@donalgodon 2 жыл бұрын
Are you using Resizable BAR with RDR2?
@tommy-z6i
@tommy-z6i 3 жыл бұрын
Nice Video Thanks!
@Spartan117A51
@Spartan117A51 2 жыл бұрын
I had to do this because my GPU was baking and causing micro stutters in-game, thank you
@VeLvEtGuNs
@VeLvEtGuNs Жыл бұрын
Got mine at a stable undervolt with stock clocks, higher score in Timespy which also passed, and taking 270watts maximum while also down 3 degrees celsius.
@chivalryremains9426
@chivalryremains9426 2 жыл бұрын
First time watching your channel. Thank you for this guide. Just ordered a 6900xt and I am switching to Team Red for my gaming rig. I'm on a 4k low latency TV with Vsync so overclocking won't help me much (as long as I can get stable FPS above 60 I'm good). But thank you for showing everyone the features and what can be done with the software.
@DevoeBanereact
@DevoeBanereact 3 ай бұрын
How ur GPU clock speed is 2403MHz mine is 13MHz bro and the overcooked is 2754MHz
@RGR_Gaming10X
@RGR_Gaming10X 2 жыл бұрын
I have a 6700 Xt, any benefit from undervolting but not overclocking? How much should I undervolt?
@detroid89
@detroid89 Жыл бұрын
I'm looking to get this beast of a gpu but I have 600w psu. Hopefully you're guide will help me reduce the overall power wattage so I don't need to buy a new psu :)
@CobusNeethlingPlus
@CobusNeethlingPlus 2 жыл бұрын
Big plus1 on liking the software. AMD definitely has the better experience there.
@ceejay2k2
@ceejay2k2 3 жыл бұрын
Ive heard someone mention that you can end up loosing performance if you just bump the memspeed to 2150 and think its fine. Seems the timings automatically get loosened over 2100, so was told 2100 was the sweetspot.
@danielowentech
@danielowentech 3 жыл бұрын
Interesting. I general, to lock in the absolute best OC you should run a benchmark after each small change to make sure performance is actually improving.
@ceejay2k2
@ceejay2k2 3 жыл бұрын
Yes, that is also best if you can run tests that are easily repeatable. I checked Gamers Nexus' review, and for the 6800XT there was quite a noticeable difference in their benchmark score (synthetic) between 2100 and 2150 memspeed. Ofcoz that might not show up in gaming workload, but they pointed out that it was something to be aware off. For the non XT the difference was smaller, so maybe that one is less bw limited in synthetic than the XT.
@simonschneider3423
@simonschneider3423 9 ай бұрын
when i turn the power limit up it gets uncontrollably loud
@MrHC1983
@MrHC1983 Жыл бұрын
Old video for sure, I got a 6800XT Reference in Jan 2020 to do 4k 120Hz gaming. Still using it. Ended up water colling it, fully custom job by me. Mix of parts, res, block etc... But yes I run 2525 by 1050mv with a 275W power preset.... just for the sake of keeping it cool.... as I don't really need more power and didn't wanna stress it out, works fine. Rams not really overclockable on mine and yeah really best to not mess with ram. I am going to upgrade the 240mm radiator setup to a 360mm just to give it that bit more headroom......... but I mean it's 2023 now and you still don't need more then this really. The 4070 just came out now and is at the price point atleast in Australia around what the reference 6800XT was so I'm happy with that if this card fails I'll have virtually a direct replacement for it.
@truth-seeker1015
@truth-seeker1015 Жыл бұрын
man in the beginning when you said switching to amd and experiencing the software... ive been on nvidia for years and just switched to AMD and I really like the Amd adrenalin software its really fresh seems like more options
@ImotekhtheStormlord-tx2it
@ImotekhtheStormlord-tx2it Жыл бұрын
me too. its so cool. everything in one place.... like for real. its so cool for people who even want SLIGHT changes. i only undervolted -100mV, + 100mhz max freq, 10% + power consumption and fast timing in vram. and if its placebo or not. games run better and cooler. and the card will last longer. rx 6800 pulse here.
@Ahmad_8412
@Ahmad_8412 3 жыл бұрын
Just out of curiosity , what were your ambient room temps and humidity level at defaults clocks? they seem to be quiet cooler than what i've seen most Rx 6800xt ref. model
@danielowentech
@danielowentech 3 жыл бұрын
Room was around 70 degrees f. I had the side open on my case to help temps since this case has awful thermals. Normal operation temps are higher with the case closed.
@AnnoyablexD
@AnnoyablexD Жыл бұрын
Can you do this again when you have rx7800xt please. Tyvm.
@jhoncloydabanag6296
@jhoncloydabanag6296 Жыл бұрын
Please do overclocking and undervolting for 7700xt. Thank you!
@RGR_Gaming10X
@RGR_Gaming10X 2 жыл бұрын
If it makes things cooler, I don't get why they wouldn't just default undervolt it for you? Whats the real catch? What is being sacrificed. Shouldn't they know the min voltage needed for everything to work.
@danstenis660
@danstenis660 2 жыл бұрын
Where to get the software?
@billlawson3467
@billlawson3467 2 жыл бұрын
I have a 6700xt and a 6900xt and when I click on the overclock button, all it ever does is continue spinning. Is there something else I need to enable?
@johnathonm7813
@johnathonm7813 3 жыл бұрын
I'm running stock frequency tuf 6800xt at 1.00v and fast timings with no increase in frequency and gained a percent or 2 and dropped 21 degrees of hotspot down to 64. Fans are quieter and using 85w less power. Amazing card. .98v crashes and I always look to bump up one more notch
@johnathonm7813
@johnathonm7813 3 жыл бұрын
Might play with that power slider though and retest but I'm happy with current setup
@danielowentech
@danielowentech 3 жыл бұрын
Yeah, actually like running mine with similar settings. I can push hard like I do in this video, but I actually usually just do an undervolt with fast timings to keep the fan noise and temps down. It makes a huge difference in fan noise.
@johnathonm7813
@johnathonm7813 3 жыл бұрын
@@danielowentech I'm at WQHD so max out most games stock at 120fps ( best settings for overdrive for my monitor) so I don't need to push it more, just become more efficient. Love your content to man, missed you in that gap in uploads a few months ago haha. Hi from Australia
@danielowentech
@danielowentech 3 жыл бұрын
Let's hope I can keep the uploads coming this school year. Almost a month in and im still going strong so far!
@umashankarkalmath1243
@umashankarkalmath1243 3 жыл бұрын
Will try these on my rx570. One thing to note is that there are not as many options as you showed on older cards like my rx570. I am on the latest radeon software drivers
@danielowentech
@danielowentech 3 жыл бұрын
True, each card is a bit different. Similar principles apply but different specifics.
@eenig8730
@eenig8730 2 жыл бұрын
What psu do You have for This overclock?
@jacksheldon8566
@jacksheldon8566 2 жыл бұрын
i did just like you (tho i kept gpu clock frequency at 2500, not 2600) i gained 4°c at max charge (gone from 90 to 86) and lowered the electrical noise from high fps by at least half. tho it seems like i did lose a few fps. still, thanks for the explaination! rx6800xt powercolor red dragon. game tested: totalwar warhammer3
@squirrelattackspidy
@squirrelattackspidy 2 ай бұрын
How do you get the overlay on top of the game?
@Uthleber
@Uthleber 2 ай бұрын
ALT + R
@squirrelattackspidy
@squirrelattackspidy 2 ай бұрын
@@Uthleber thank you! :)
@KorbanJandaz
@KorbanJandaz 5 ай бұрын
is this still work in 2024 and on the latest driver aswell?
@tobytoxd
@tobytoxd 26 күн бұрын
Yes it does.
@philmambax1531
@philmambax1531 3 жыл бұрын
What is the RAGE mode? (Tuning Preset)
@GamerCaveXD
@GamerCaveXD Жыл бұрын
why does amd radeon software install amd pro when i try to install on my amd radeon r9 m360?
@dickyrahadian3725
@dickyrahadian3725 2 жыл бұрын
Is undervolting and/or overclocking can reduce the GPU life span?
@JohnnyHughes1
@JohnnyHughes1 2 жыл бұрын
Using your cards at all will reduce their lifespan. I don't think you can, within the restrictions of the upper limits on the software, damage your GPU (or CPU if doing the same things). This is, of course, assuming you use proper cooling. if you took off all coolers, you could physically damage the circuit boards, etc. Why undervolting works is that when you bring down the voltage, the chip generates less heat. This means it will run at a slightly lower temperature. The way both the Zen 3 CPUs and the RDNA 2 GPUs work, they are almost always throttling on Temperature when running close to maximum load. Reducing temperature will allow them to run at a higher frequency if the load requires it. The only tweaking is to be able to bring the power down just enough to keep everything stable. But if properly undervolted, both GPU and CPU will run at a higher frequency and lower temperature. It is likely better for the chips as temperature is generally what kills CPUs/GPUs. As an example, I play Anno 1800, my DX12 Benchmark score went from 58 fps to 92 fps at 3840x2160 (4K). My temperature was actually lower by 8 degrees C.
@dickyrahadian3725
@dickyrahadian3725 2 жыл бұрын
​@@JohnnyHughes1 until right now, i always think that every electronic are running with minimal power (Watt), so when voltage (V) is going down, in order to keep the power needed are fullfiled, then the electric current (Ampere) will go up. And what i know is, when Ampere are going up, it will increase the heat on the component it through. Thats why this video is a bit mind blowing for me, and i am still confused and scared to undervolt my GPU >.< I had a one time where i played with a PSU, at that time i switched the PSU voltage from 220 V into 110 V, then BOOM... my PSU exploded ~('_'~) The statement that reducing voltage can generates less heat is still hard for me to take :( ~Please enlighten me~
@JohnnyHughes1
@JohnnyHughes1 2 жыл бұрын
Well, in reality, with electronics there is a resistance that the component has and the majority of the power draw is wasted heat. When you lower the voltage, you are lowering the current and still getting the work done while generating less waste heat. In fact, lowering amps/power by changing limits for them is the HOW. But that assumes there is still enough power to get the work properly done.
@iceguevarra9906
@iceguevarra9906 2 жыл бұрын
How the rivatuner works even adrenaline is on? Does the adrenaline override the msi after burner?
@chimistyou
@chimistyou Жыл бұрын
what software are you using to show fps , ram ,temp etc in the left corner of the screen. thank you
@martim_trindade
@martim_trindade Жыл бұрын
msi afterburner
@abigor6662
@abigor6662 2 жыл бұрын
I'm a new builder, recently build a pc with a 6700xt, I'd be grateful if you could also explain the power draw difference after oc and uv and before, I'm bit concerned on the power draw as I'd like to have it at the minimum, thank you.
@IIKraftI
@IIKraftI Ай бұрын
doing this for stalker 2 right now
@ShaquilleOatmea1429
@ShaquilleOatmea1429 Жыл бұрын
I went to 990 volts and nothing changed
@Guerobjj
@Guerobjj 2 ай бұрын
what about changing the minium frequency? my main issue is that i have big fps drops. so far its worked but just curious since it wasnt mentioned
@XMoldyMe
@XMoldyMe 2 жыл бұрын
Isn't it better to just hit rage mode at the top ?
@JohnnyHughes1
@JohnnyHughes1 2 жыл бұрын
Define better. And probably not. Rage mode increases frequency by increasing power allowed and increases the fan speed .. BUT .. it does not lower voltage. The lower voltage gives you an additional temperature drop .. that allows MORE frequency increase if you are actually throttling on temperature. At least for me, I am usually throttling on temperature with these cards when at the top of the range.
@yissnakklives8866
@yissnakklives8866 3 жыл бұрын
You really should give 7 Days to Die a shot. It's the only game that I've felt the need to mess with settings on - because my PC runs it fine on 1440p (monitor max plus only a 5700xt) but causes GPU temps to skyrocket (110c hot spot) and the fans to go full hair dryer so I started playing with these settings. (so far, no luck finding a setting that will let me run it at 1440P without hair dryer effect)
@danielowentech
@danielowentech 3 жыл бұрын
Haven't tried that one. Interesting. For me using an undervolt with fast timings near default clocks controls my temps and fan noise really well.
@imadecoy.
@imadecoy. 3 жыл бұрын
That game is coded like trash and is 100% CPU limited for me with a 5900X
@andrewzacharko8357
@andrewzacharko8357 2 жыл бұрын
6800xt on the box says no less than a 750w psu I had a 600 first but just went 800 to make sure I had enough
How to Overclock & Undervolt RX 7800XT | ADRENALIN 2023 Easy Tutorial
19:45
Ancient Gameplays
Рет қаралды 153 М.
RX 6800 XT Is An Overclocking MONSTER!!
6:05
Gamer Meld
Рет қаралды 84 М.
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
I’ve Never Been This ANGRY and CONFUSED - AMD 2025 Product Update (CES)
12:14
The CORRECT way to gain FREE FPS with any AMD GPU
23:21
JayzTwoCents
Рет қаралды 1,2 МЛН
NEVER install these programs on your PC... EVER!!!
19:26
JayzTwoCents
Рет қаралды 4,7 МЛН
⚠️7 MISTAKES WHEN CHOOSING a GPU in 2025 ⚠️
13:37
Live Games IT
Рет қаралды 248 М.
Motherboard Default settings could be COOKING your CPU!
15:33
JayzTwoCents
Рет қаралды 1,4 МЛН
The Nintendo Switch 2 IS FINALLY HERE!
14:11
BeatEmUps
Рет қаралды 166 М.
AMD Radeon RX 6800 Review, Best Value High-End GPU?
20:56
Hardware Unboxed
Рет қаралды 225 М.
How to OVERCLOCK and UNDERVOLT RX 6800/XT | ADRENALIN 2022 Easy Tutorial
15:15