How To Paint 3d Prints - Joining Two Resin models

[@renato082788]

Great job man, Im happy to have found your channel as it has inspired me to use my Airbrush a lot more than I do. Also forget about those people complaining. What I have found in the 10 years of model painting is that everyone has their own way of painting and I dig yours.

[@Groundeffected]

Thanks my dude. You should use the crap out of that airbrush. A little overspray never hurt anyone 😉

[@mitchellkruszyna109]

Another dynamic piece! Great to see combing two bases also!

[@WillyKnapp]

most informative and entertaining artist I follow. The narration and choice of words are the BEST!!! ALWAYS looking forward to the next post.

[@thrawn5k]

Killer! Great work as always. You keep me inspired to continue painting even when I lose my drive

[@Groundeffected]

Get back to the painting desk!!! Haha no for real. I’m glad to inspire you dude. I honestly just want to keep people feeling confident, it’s not as hard as it looks

[@rothgamez]

You have no idea how happy I am that you did these models. The next prints I wanted to do was these two and I wanted to see how you would paint them because I still don't really know what I'm doing, so this is perfect timing. I immediately subbed to the Patreon as well lol.

[@Groundeffected]

Awesome dude. Hope the video helps! Someone said to overlap the bases in the slicer before printing. It’s a bit of a guess if the models will fit right but could be an option to look at.

[@brboyd80]

Great job! I like the way you merge both! Came out good.

[@Groundeffected]

Thanks dude.

[@krisdesha8129]

Wow, great job. Just started with 3d printing last week, printed a small Omniman Bust, and painted with Paint pens last night, now I have stuff in my amazon cart waiting for payday, thanks for all the tips, slow to get everything I need.

[@rottiehood3872]

Deck Tan drinking game! Take a shot of Bailey's every time you say Deck Tan! lol!!

[@Groundeffected]

Don’t, you may die

[@Yuss3d]

You are an inspiration to me. I just started with the airbrush thing but I suck big time. Well I think I need to practice and practice. Thanks for this amazing video.

[@tonyspud13]

when spraying close up what needle size and presure do you use oh keep up the great work ok [love the pinkle'lol]

[@wodansam75]

insane. great job as usual. ill be definatly checking out this patreon. i love invincible and these models are awesome

[@Groundeffected]

They were really well sculpted. I enjoyed working on them

[@LivingLambeaux]

This is fantastic timing! I have an Invincible figure all printed and was looking for some tutorial videos yesterday, which there weren't any

[@Groundeffected]

Glad to be your inspo dude

[@KitbashCustoms]

These came out sweet! Great idea combining the bases too!

[@joshconfer209]

Invincible is awfully visible for being invisible.

[@Groundeffected]

Hahaha why is it so hard to say that word. Was easy to say off camera but I gave up trying to fight it when the red light was on.

[@ChrisGraber]

Invincible is a hard word? Like someone is invincible?

[@krosanmage]

Nice painting, love your videos. What’s you layer height?

[@VesperSalvation]

I keep trying to look through your videos on how to make pinkle. As much as I love your videos and watching your style of painting. I would love to just stumble upon it 😂

[@Groundeffected]

Think the first mention of it was in the world of Warcraft video.

[@VesperSalvation]

@@Groundeffected thank you so much, if you sold it in your online store, I’m sure it would fly off the shelf’s. I know I’d buy it.

[@memq1987]

I either got a badly mixed Deck tan from Vallejo or something else, because I could never use it as a white

[@Thatoneguytrav]

Another top notch job, thanks for the tip about no pinkle on the dudes, my upcoming cowboy would have been very cowgirly if I didnt know that. 😎✌

[@Bobs_your_uncle19]

Awesome job as always! If you don’t mind me asking, what compressor do you use for your airbrush set up?

[@ian_gui16]

Greetings from Brazil, I'm a big fan of your work and I managed to learn a lot from you!

[@samduss4193]

excuse me what what is kind of material resine that can be painted ? is like any kinds ?

[@Taruk620]

Absolutely crushed it!!! Thanks brother for the amazing work you do!

[@lordsnake1988]

Hi man nice new Patreon, I'm thinking into joining its the 15$ tier the complete one?

[@Groundeffected]

Thanks dude. I hope everyone loves your models and you spoil them all with fantastic pixels to print in their digital model forming machines!

[@deenjoan9938]

Nice work really enjoy watching your builds

[@mushrifahmed8107]

Oh man!!! These look soo incredible!!!

[@Gloriousnone]

I am watching to learn how to paint better, but the base, bro, you know you can overlap them in the slicer and print as one right?

[@dp_antitecture]

i can chose the 2 3d prints or its ramdom i want this file how can i get it

[@DobbsyLondon]

A other question Breennnnnnnnnt, what size needle do you use on yo Airbrizzle? Thanks mcdaddy

[@Groundeffected]

0.5mm my dude.

[@tinteddeluxe]

Sorry to be a pain but what is the best Matte clear coat and gloss you use? Happy New Year Matey.

[@Groundeffected]

Galleria matt varnish and I just use the cheap gloss for sprays and the army painter one for eyes. It’s not super glossy tho

[@killer-bv7xx]

A amazing job and looks amazing and a great paint job and and a great video.

[@Groundeffected]

Thank you so much

[@greedy3d480]

Bloody hell Brent great idea for gap filling.that's been added to the bank😂.. Wait for the moaners.... They'll be coming soon my friend... Great job

[@Groundeffected]

We love em. They keep our views climbing!! Haha also dude I shove all sorts of crap into gaps then seal them over with glue and resin hahaha

[@rothgamez]

Fancy seeing you here! I just recently found your channel the other day and instantly subscribed. Your Alien prints are what got me hooked lol.

[@greedy3d480]

@@rothgamez great to hear mate 👍👍👍👍

[@vonniesgaragevonnie448]

my bottle of Deck Tan looks pretty grey. I am not familiar with the characters in this video. Excellent work! You make it look easy.

[@robertzagyi6222]

My problem is, when I paint my resin prints the acrylic paint comes off easily. I scratch it with my nails and paint comes off. How to make acrylic paint more resistant against scratching? Also can be washed off with water, terrible.

[@hacisme2456]

Do you wash your prints

[@Luv2ripFPV]

Looks fantastic! Love the way you used butt wad to join two models together. Looks amazing!!

[@tbrew1]

Groundeffected, you had me rolling when you were using the ultraviolet light.

[@Groundeffected]

Because we all gonna die or my super dope rave glasses?

[@SuperShark3D]

great tip on the white stuff aka toilet paper

[@Groundeffected]

Haha it’s the simple things!

[@Souloni]

Inspired to continue on to my second Resin Figure (and third since they're a set). Adding a comment for your algoridamajig.

[@Groundeffected]

Do it!!! You got this. “Each time you make poo you get closer to gold!!” -your dad 2024

[@prg212]

I just discovered your channel some days ago when I decided to buy the Uniformation GK two and I need to see more of your videos but I have a big question which class of resin do you use for the statues ? Is 8k resin don't matter that this one is fragile? Or is abs like resin?

[@wickus7123]

Hi do you still use the UniFormation GKtwo Resin Printer 8K for your prints? I am looking to get a resin printer and would like some help on which ones to look at. Was thinking of getting the Creality Halot Mage pro but seems like it has a lot of cons. Great video and i enjoy all your content so much

[@Groundeffected]

Yes dude I live my gktwo!! Esp now I’m the winter. If you have a warm space then also look into the mighty 8ks that’s a really cool machine for a good price too

[@hectorsartwork8750]

Awesome work!!! I think if you didn’t print the base it might have been easier to combine them using software like nomad.

[@redcupra]

Wow love how you do these.💯💯💯👌👌👍👍

[@philfoofighter]

That’s not how you paint skin tones. That’s not how you fill gaps. That’s not how you dance while waiting. Now that’s out of the way Happy New Year Brent. Congratulations on 50k on here and Instagram 🤘🔥🎉

[@tam653m]

Don't you have issues using super glue over paint, and not directly to the resin?

[@lordsnake1988]

Hey dad question. Do you have a video to thin the paints? I'm a noob who use just contrast like paints and dry brush because i get the airbrush clogged all the time.

[@Groundeffected]

Yea I do actually check far back dude. Like 2 years ago

[@lordsnake1988]

Thanks ​@@Groundeffected

[@jubeiiiiii]

Hi dad, once again a masterpiece , but what I love over all is that you add well are human and so some cleaning of your airbrush and do some mistakes. By any chance, could you please tell us once again, what white are you using? Cheers big ears mate!

[@Groundeffected]

So the white is actually deck tan. I don’t think I mentioned it in the video but deck tan is reallly good to use in place of white because after you use deck tan you can put white over the deck tan to make it stand off the deck tan a little bit.

[@VelourYeti]

Awesome stuff, man!

[@Ultimaniacx4]

Anybody know of a more affordable Folkart or Apple Barrel alternative to deck tan?

[@Groundeffected]

It’s the formula dude. Not many things come close to deck tan. Swear to god best few bucks you’ll ever spend and it lasts ages.

[@kawaminet]

I don't paint anything, but I was looking to get into it and came across your video. It held my attention the whole time. You have a away about you that connects people with your thoughts. This video made me smile so much! Keep it up!

[@thitevis]

AMAZING JOB!!!! Congrats!

[@ferripro9112]

I love this guy😂

[@geekrus3971]

Amazing work...as always 👏👏👏

[@Tuntira]

I hear a South African accent and I am here for it!

[@LorenzNijs]

you painted the gloves blue ! i only know cause he told me because I did a similar thing by painting the boots yellow

[@LorenzNijs]

i obviously made this comment before you eventually said it in the video

[@Groundeffected]

Haha that guy!!! Just out here looking for incorrect hands and boots!! At least I’m not the only chop who didn’t pay attention to the colour references.

[@fredericpoli4061]

Hi what is « dectam »?

[@anthonycanciobello4669]

Would love to see you paint the scarlet spider from wicked.

[@Luis-op9vx]

reprint the base over lapping in the slicer next time??

[@Groundeffected]

Yea that’s a gooderer idea hahaha

[@carbonkingdom3571]

where i can buy those?

[@LoneYukon]

remember "The Great TP Shortages" of '21 - with all those in-store aisle clearing rampages and epic battles for the last roll? ....do you recon we can blame that on 'hobbyists'...and "Collectable 'Constructors'"?

[@AsimPaints]

Buying some Deck Tan!

[@DigitalConfusion]

Need tutorial on the dance for curing resin.

[@luisabernal2700]

Which glue you uses

[@Groundeffected]

Super glue

[@r21174]

what number paint brush are you using for eyes??????????

[@Groundeffected]

Uuhhhh I think it’s 000

[@WillyKnapp]

Is "Pinkle" the real color name??

[@DeathTempler]

I like the cut of your skib

[@indyhelsen5]

invincible is his name 😉

[@ewen832]

Still enjoying your videos Dad.

[@walter_46-p7l]

seu trabalho é top demais !!!!!!!! sucesso amigo !!!!!!!!!!!!!!!

[@paintfortauva]

Amazing

[@philippinepeso2897]

nice works on resin models.. can i hire you to do Rogue (this time from xmen evolutions)

[@allanbritton]

Fantastic as always. Ignore the haters.

[@Groundeffected]

Haha thanks secretly we love them tho they keep us entertained.

[@evilldead6824]

Hey DAD! just a pointer on not wasting supports on the interior of hollow models. When u hollow out the model make sure u do infill but change the infill from 30% to 5% This will basically make the model hollow with like 1 or 2 supports inside that act as infill and when u add supports it thinks that the model is solid and will not put supports inside the hollowed out pieces! Amazing work!

[@Groundeffected]

Thanks. I just prefer doing supports to be sure I don’t have any weird stuff happen. I like to be in control of the failures haha better safe then sorry

[@AuntJemimaGames]

Having internal supports is generally considered a bad idea due to the supports potentially inhibiting proper full curing of the inside. Water curing might get around the issue, but I'd rather completely avoid the possibility of uncured resin inside of a model by limiting supports to only internal islands. UVTools is your friend! It's crazy how useful it is, and how much it can detect and correct on sliced models that seem just fine to print otherwise.

[@evilldead6824]

@@AuntJemimaGames yeah that's the reason i do the 5% infill to keep slicer from putting the internal supports. the supports trap so much extra resin and if not cure will eventually make the resin fail, but to each their own if he still wants to have slicer put internal supports. I've never had a piece fail with 5% infill. Actually learned all this from The Creative Collector channel

[@evilldead6824]

@@Groundeffected np to each their own. at 5% u still get some support inside. Really the only reason a hollow piece will fail is if u mess the wall thickness too much i keep mine at 1.5. If u are going to continue to let slice put internal supports be sure u got a good uv peen to cure all those supports so model wont fail in future. Just some advice to help take it or leave it :)

[@evilldead6824]

@@Debunked421 yeah 5% works awesome. every drop of resin u save counts lol

[@RookFett]

Curse you Dad! - now I have to join another Patreon and get a gallon of Deck Tan!

[@Groundeffected]

Haha I am so sorry. This dude has his model choices on point tho. And he comes from our side of the patreon fence so he should know what we want and he says he’s gonna deliver it.

[@ThesecretL]

What the hell is pinkle? Cracking job though

[@Groundeffected]

Haha it’s a magical colour used to undercoat skin tones for ladies

[@vivekrserleena]

Please do Jinx by Bulkamancer next!!!!

[@blahtoausername]

I have a challenge for you, Dad. Can you paint a model only using one set of paints? Perhaps the Game Color Vallejo 16 Colors for Fantasy Figures, for example. To show what can be achieved at beginner level with starter paint sets.

[@Groundeffected]

I’ll one up your challenge and say it doesn’t matter what paints you use dude and I’ve done a video about this already kzbin.info/www/bejne/imTCfnaufpt7iNksi=lebW3KQagmid9AUG

[@Groundeffected]

I just re watched that video hahaha man my videos really sucked back then I didn’t even clean the supports off that hair hahaha😅

[@blahtoausername]

@@Groundeffected you're also cheating with oil paints :p lol

[@samduss4193]

i tried to do it i almost died with the smoke :)

[@SolarVR4]

Hey Your Dad, you post great content.

[@Groundeffected]

Thank you 🙏

[@HappyBabushka]

Alas ill never know what this video was about

[@J.KINGTOONZ]

Your model painting skills are the best on KZbin, no lies. 💪

[@SBennett-70sKid]

You know, you really should try using Deck Tan instead of white.

[@Groundeffected]

For real though I’m gonna order some in

[@adriant1654]

The printing and painting is meh but the commentary is ehhh excellent! ❤😂

[@steveneisen6705]

Never Glue painted on painted surfaces.... always scrape the paint away so you have proper adhesion... is that one of the mistakes??

[@Groundeffected]

Nope I scraped and scored it.

[@lordsnake1988]

If i get a dollar for every time you say deck tan . I would have a lot of dollars now 😂. That brand should sent you that paint for free😂

[@Groundeffected]

Dude we’d all be friggen rich haha

[@lj5030]

Why do you make saying Invincible sound so hard 😭

[@TheMugwump1]

BLEH!(metal noise)

[@thegingerdronepilot]

first

[@Groundeffected]

Hahaha yes lad you show that contrast guy…

[@ゼクス風神拳]

日本語での質問大丈夫ですか？

[@Groundeffected]

Sure ✔️

[@ゼクス風神拳]

@@Groundeffected 様 勿論って事だと思いますので質問失礼します。 ch登録して勉強をさせてもらってます。 毎回、3Dprinterで制作してる物は営利可能なんですか？

[@Groundeffected]

@@ゼクス風神拳as long as you not using copyright you can. I don’t sell any of the models I make I just print and paint them and keep them. Some custom requests for custom painting but never make a production of them.

[@ゼクス風神拳]

@@Groundeffected様 返信ありがとうございます また、お互いに時差があるのに御対応ありがとうございます。 作った物を売るのはダメって事ですね？

[@Groundeffected]

@@ゼクス風神拳​​⁠that is a grey area. Basically if you don’t own the ip you cant sell them. If it’s original and you have permission from the sculptor then you can. However if someone wants to pay for your time to paint their printed statue that looks like a recognized character I think you’re ok as long as you are not making with intent to sell. But I am not a lawyer and in reality I don’t sell any of my statues unless they are originals, I do however paint on commission bases time to time for custom collectors who want specific custom statues they can’t get otherwise. A lot of people have custom sculpts made that no one will ever get to print and they have one of a kind statues commissioned.

[@DingoPaints]

LMAO!

[@cellenger7366]

yuussuf abi

[@baldurironshield5083]

complaining here to complain.

[@limitedhangoutlive]

This has to be one of the most annoying videos I’ve ever listened to.

[@TheMixEmperor]

Agreed, not sure why he's putting that voice on, but it's fucking irritating.