How to Paint Cabinets | AWESOME Kitchen Renovation With Airless Sprayers

[@SethCorbinMusic]

This painter seems super professional. I hope he keeps doing what he’s doing

[@thepaintpeople]

:D

[@Helmuesi911]

I like this guy.. he’s saying virtually word for word what I tell my homeowners when I refinish cabinets. Compliments from someone in the trade since 1994.

[@thepaintpeople]

Rade is awesome!

[@user-zk4qw1ws4f]

Rad and his team did my kitchen and i continue to recommend them. Professional and efficient!

[@lexandersantana8089]

I’ve been using tritech 208 and 206 fine finish tips on an airless, absolutely incredible finish. And a whip hose is mandatory inside the narrow passageways of a kitchen. Great job. I’ve been using pre cat for years but just switched to renner and it’s incredible. And learning about positive pressure and negative pressure is another simple tip. Also a quality sander isn’t an option, at least to get down to bare wood. Whenever I skip sanding it always comes out sub par. Whenever I sand between every coat, it comes out even better

[@erickvaliente8158]

Hi can you explain what's renner thanks

[@eddyrose8570]

Renner is a brand name , also, cic, malesi, etc. These are water based idustrial coatings. As this guy mentioned on anothet level. Check Eric Reason, test dont guess, on youtube. He has been usings these new polyurethane 1k and 2k water base coatings for the last couple of years. A ton of info about products, tips, brands, sanders, sanding pads, methods, airless, air assit, hvlp, etc. N

[@julianno]

Bb 12:43 12:43 l

[@julianno]

M

[@Happy_life117]

Watching Rad spray the kitchen was weirdly relaxing! If I had a nice kitchen I’d hire Paintcore to refresh for sure!

[@user-rn6bh2hm2z]

I recently purchased a fuji sprayer from The Paint People to paint some custom made fireplace cabinets I made. Wow, everyone needs to rush out and get one of these sprayers. Within a few minutes I was spraying like a pro and the results were top notch. Although hiring a painter (like in this video) to do this would have been easier as I masked up the entire area which does take some time, but I like to DIY and thought I'd give this a try. No regrets. The guy in the video is obviously a pro and not to take anything away from him, but it is possible to DIY this with similar results if you have the time and the proper equipment. On to the next project!

[@chazbickel4518]

"There is a science to watching paint dry"..... the difference between putting a true coating on as apposed to just changing the color. Great video

[@gurparveshsingh5348]

U should have used graco's 208 fflp or even fine to get the finest results. Those tips prevents paint runs and wont throw too much paint on the trim or cabinet

[@EmanuelMartinezVazquez]

Very nice video, I do wish they would have talked more about the preparation of the actual paint. What type of paint is recommended if any additives are needed and so on.

[@loribradley5498]

Amazing workmanship! I’m so pleased you featured this company and it’s capabilities! “There’s a science to watching paint dry” 😂 I love the attention to detail. I only wish they were in my area.

[@michaelc.ateoate979]

For new guys out there here's a great tip. when doing the carcasses or the faces less is more! If you get runs by mistake let them dry out fully and then deal with them after the fact don't go after them while they're wet you'll make a mess also you can go to habitat for humanity buy some cabinets for cheap and practice on them cheap furniture too is nice to buy to practice on.

[@thepaintpeople]

Thanks for the tip Micheal!

[@TScott-vp9zv]

Excellent video! The filming was high quality and Paint Core is high quality!!👌

[@michaelkiley5658]

Lots of good advice. These guys know what they're doing

[@nickyb6435]

Great showcase for what's actually involved in the process

[@coupofmentality3417]

Great commercial for this company, they clearly do beautiful work. Not a how to though, maybe an introduction.

[@rts3613]

One of the most informative I've seen. Thank you.

[@michaelc.ateoate979]

It's been a minute since I've done cabinets so I wanted a refresher video it's a very satisfying video that you have put together ,very complete. thanks for going through all the details. Your commentary is really good. Nice emphasizing your whip lines there so much more convenient to manipulate and move around tight areas and to get the true motion on your arm to create your final layoff.

[@thepaintpeople]

Hey hey, what specific feedback, thanks so much!

[@James-dv1df]

Coo video, what product did he say he used? Was this using a graco 395?

[@chrisherrada8646]

Great video! Very informative and professional.

[@gabriellekube7463]

Great video and more spraying videos would be awesome! I really enjoy this channel.

[@accessaj]

411 fflp tip is the only tip mentioned, I’m assuming the 1/2” or 3/4” edges had a different tip? Maybe 211? Is it a sherwin pre cat acrylic paint? Thanks!

[@Painter95]

good set up! just gotta start spraying the new 2k polly!

[@marycabrie1413]

Thank you. Absolutely loved this. So informative and lots of great advice.

[@MP-yz6sb]

This was a great video. Wish these guys worked in my area. I'd like to repaint my cabinets but first I want to make new doors/drawers and then have them sprayed. I'm currently repainting the inside of my home BM Simply White and using Advance on all the doors/trim. I previously painted my cabinets using Sherwin Williams and as careful as I am I still have a chip here and there but I didn't use any kind of hardening agent on them after which may be part of the problem.

[@thepaintpeople]

Thanks for watching!

[@alexandermarconi3118]

This guy is like the DJ Khaled of paint. He just needs to say, "Another One!" And great work!

[@thepaintpeople]

Lmao! You played yourself. 😎🤣

[@sukhmanmall1746]

ty for teaching

[@bexaminer1]

I was hoping to hear what tips he was using. I thought maybe a 313 but I see below someone mentioned a 208.

[@jimfeaster4837]

Very nice !

[@thepaintpeople]

Thank you very much!

[@waltercade2484]

What gun hose is he using that is more flexible than the standard graco gun hose?

[@oscarsingh4662]

Whats the brand of the water borne pre catvlacquer you guys do? What primera do you use beneath it?

[@ianrose8804]

Great work on the video, very helpful!

[@thepaintpeople]

Hi Ian, glad it was helpful. You thinking of trying it out?

[@victoriafine8209]

This video is oddly calming and soothing to watch! I need help with a project: Want to paint a great room built-in to match a brand new kitchen. The GR built-in has car-siding with a honey gold finish (1980!). New kitchen opposite is a mix of painted and wood cabinetry. I am a homeowner who wants to prep my built-in for professional spraying. Got an orbital sander but the car siding crevices are tricky. Any helpful suggestions besides more muscle, perseverance and patience? I'm tempted to remove the car-siding altogether.

[@fabianquituizaca4259]

Best video I ever see , saludos from nyc

[@thepaintpeople]

Hey, thanks for watching!

[@nickw3255]

Do you know what kind of 25 foot whip hose he is using? I can only find 4' whips and would like a longer one.

[@DrakeJStone]

I'm a DIY'r that has to tackle my kitchen cabinets this week. We're talkin' mid-range cabinets... nothing fancy. I believe they are poplar, shaker-style. I want to spray but didn't want to pay the big $$$ for a good HVLP piece of equipment and am not trying to get a super high-end finish, just something that looks good and fresh. I forgot that we had bought a Graco Magnum X7 YEARS ago (like ten years) that was still in the box in the attic. Never used! I'm going to be using FFLP 211 and 311 tips while using Sherwinn-Williams Extreme Bond Primer and Emerald Urethane Trim Enamel. Does anyone have experience using a Graco X7 for cabinets? Is this a sound approach given the situation outlined? This video gives me some level of hope that I'm on the right track. Lots of great advice here and hoping to gain a few more perspectives.

[@alterrex6921]

311 is too small of a tip for the extreme bond primer you'll get tails even at 3000psi I would use a 312 thinned 10%. 310 for the emerald urethane, have used a 308 with it as well no issues unthinned. X7 isn't approved for solvent-based paints so use at your own risk. If you do use it run thinner through it after the primer and make sure the gun is bonded to the metal waste container your shooting into. Provides a ground for static build up in the hose.

[@SlooFoot]

311 too small for primer

[@DownloaderVideo]

@@alterrex6921 Both the Extreme Bond Primer & Emerald Urethane are water based products….no need to use paint or lacquer thinner and they are not flammable.

[@alterrex6921]

@@DownloaderVideo My apologies, I use the Extreme Block Alkyd Primer and was referencing that using the wrong name. Yes, the Extreme bond is water based.

[@DownloaderVideo]

@@alterrex6921 No harm done my friend. Just clarifying for future reference so no one makes the mistake of mixing both and creating a mess.

[@jonathanhicks1397]

Could you provide a link to the whip hoses you use please?

[@ChicagoEpoxyCoatings]

Beautiful. This guys has to be Assyrian. Anyway quick question from your boys in Chicago, which primer would you recommend to use? Also for finish coats which paint would you recommend? Also do you guys add a top clear coat of any kind?

[@thepaintpeople]

I’m Canadian! :) 🇨🇦

[@bleu8883]

What brand of water based precat???

[@samanthacharles2930]

Do you caulk the doors before spraying? Specifically on shaker style doors?

[@anrivera1975]

How you prepare/cover the cabinets? What material are you using for?

[@graysonb8990]

uneven coverage with that spray technique, applicator error.

[@mattgloss8580]

Is the lacquer formaldehyde free or its just off gassing in the client house?

[@rogelioybarra4068]

I just bought a fine finish tip and a brand-new guard for it the first time the first time trying it I had a problem with it I will spray the paint and once I would release the trigger of my gun somehow it squirts a thin line of paint what kind of problem be thank you

[@thepaintpeople]

Hmm, hard to say without seeing it but spitting usually happens when your paint gun's nozzle is not properly screwed into place?

[@emmanuelmota1]

Content on point !

[@thepaintpeople]

Appreciate that!!

[@mikedavis9948]

What is the exact material they use? Pre Catalyzed Lacquer. What brand? What sheen? What primer? Thanks! Great video!

[@thepaintpeople]

They use a water based Polyurethane made by Canlak. 10 sheen

[@jonmike316]

Thank you for the video. He mentioned 3 coats and he sprays and finishes from 12-3. The paint dries that fast?

[@thepaintpeople]

PaintCore uses a lacquer that dries in about 30 min to recoat.

[@ricardocantu477]

What type of paint oil-based or latex.

[@thepaintpeople]

Water-based Lacquer.

[@Igor-q3f]

Do you caulk the floating panels?

[@emilyp143]

No

[@Ang.0910]

3:20 - 3:29 huh? Can anyone tell me exactly what he said? What kinda primer? 3 coats of what paint? Thnx

[@thepaintpeople]

Hi there, he said to use a pre-catalyzed solvent based primer, and a waterborne pre-catalyzed laquer, 3 coats. I believe Canlak makes them both. Pre-catalyzed means the catalyst is already in there.

[@iconoclast6994]

Are you in NYC? Or do you recommend anyone here?

[@sinuemedina2550]

What's the PSI your using?

[@andreanicho6696]

Love the vid, unfortunately the paint core website doesn’t seem to work for me on mobile. Trying to understand cost...

[@thepaintpeople]

Hmmmm. Works on our end, here is the contact email for PaintCore. [e-mail]

[@aimeecichuttek787]

An average household kitchen usually costs between 4-6k. You should be able to upload photos on our websites to receive an estimate. Give us a call if you're having any issues!

[@JamesSmith-je8sw]

I would sell my soul to have gun technique like that the transition from from the work to the masking and back to work is awesome I’ve watched this video 20 times I’m always worried about spits from starting and stop I feel like If could master the face frames like that! what gun do you use ?

[@thepaintpeople]

Graco G40

[@JamesSmith-je8sw]

I thought the G40 was for Air assisted airless ? It looks like a contractor gun I really couldn’t see bc it’s moving so fast lol

[@eddyrose8570]

@@JamesSmith-je8sw its an airless. Best for these newer coatings. More waste but very efficient and quick

[@sinuemedina2550]

What causes spits when you let go of the spray gun trigger?

[@QuiK075]

@@sinuemedina2550 dirty filters or not using the proper filters. A bad used tip or even back pressure from the sprayer.

[@craigcowin9665]

Someone on the Isle of man is using this video "Concept kitchens"

[@juanp235]

Can I use a kremlin m22 hvlp gravity fed to spray my cabinets?

[@thepaintpeople]

If it's an HVLP gravity fed you should be good.

[@gurparveshsingh5348]

411 fflp aint a fine finish one dude from graco. That thing throws paint like pressure washers

[@chrisgriffin5119]

what kind of sprayer and tip are you using in this video

[@thepaintpeople]

Hi Chris! It’s a 408 tip with a graco 395 sprayer.

[@juanmedinar20]

Do you know with what grit he sands the cabinets between coats? how about the primer? and pre-primer? I really like your videos. Good job.

[@thepaintpeople]

They start off using a 180 grit and switch to 400 grit between coats.

[@no-page]

Please tell us what products PaintCore used on that kitchen (primer/topcoat). You popped up a Benjamin Moore logo, but Rade really seemed to avoid any specifics on the paint. You are the Paint People, right? I thought maybe it was Ultralaq, but Rade's mention of the number of coats doesn't follow Ultralaq guidelines.

[@thepaintpeople]

PaintCore uses Canlak lacquer. If you email us we can locate a distributor in your area.

[@no-page]

@@thepaintpeople Thanks, but there is only one US distributor for Canlak and they don't even have their own website. Using a Benjamin Moore hashtag and showing a Benjamin Moore logo when Rade starts spraying is very deceptive.

[@thepaintpeople]

We put the Benjamin Moore logo because the colour used was Simply White, and considering a majority of our videos have been about colour, that was our focus with the hashtags. Perhaps it should be moreso focussed on the product itself, so we can change the hashtags to reflect that better. Thanks for the feedback!

[@eddyrose8570]

@@thepaintpeople for the neeer and best water based industrial coatings, be it polyurethane 1k and 2k, water base acrylics and water base poly/acrylic 2k; Renner, Cic (Centurion), Envirolac, Sirca, Milesi, Ica Distribuitors; Annex Paint, Valley Wood Coating, Dc Clark, Cic and Envirolac themselves, Timberlane Finishing solution, ML Campbell, MK Sales, Hertzville Paint. These are top of line distribuitos, 3 to 5 days shipping to anywhere, and they also carry equipements, sanders, sanding pads and very important can color match, .5 delta cms is industry standard, most of these will reach under .3. They can also help you trouble shoot.

[@sinuemedina2550]

Laquer needs acetone, retarder and gotta make sure of the environment temperature. Water based paint you skip all that, just spray it and has the same look.

[@thepaintpeople]

Thanks for the hot tips!

[@kaystinebrink1220]

You didn't include information on the life of this paint job. I have cabinets I'd like professional sprayed but feel the chipping will start immediately and cannot get a answer from other sources.

[@thepaintpeople]

I suppose time will tell. Perhaps we can do a follow up further down the road!

[@kaystinebrink1220]

@@thepaintpeople Thanks for a reply. Chipping is so difficult to repair especially when your professional is using the type of paint they used. Not like you can sand the area a little and paint the same color over the spot. Smoothness will never be the same.

[@domingez79]

You dont use air assisted method so i presume its not a best method of finish.. i dont see the details on video

[@SqueezTheSkeng]

How many coats do u do on the cabinets bro??

[@thepaintpeople]

He suggests 3 coats plus primer.

[@douggreen980]

So latex on the box but precatalized lacquer on the doors.

[@thepaintpeople]

Pre cat lacquer everywhere.

[@akirachapman39]

Dose anyone use this paint product?

[@alexandertuck2683]

How does it take 10 days to do that if it takes you a day to do the carcass? The doors and drawers require no masking and the same amount of coats? 3 days make more sense 😂

[@PrOBOY251]

They do about 10 kitchens per week. So the process takes a bit longer than most smaller companies.....3 days is total labour/kitchen, yes.....

[@jag86648]

Is this an ad? Very obvious. I came for painting tips not a sales pitch.

[@joenelson5439]

Why would you have the spray fan that way. You limit half the tendens in the arm. If that was the way he was trained,,,cute but sad. Hey, It makes them money. Cool..

[@matthewkerwan8481]

I thought this was a how to video turned out to be a waste of time commercial

[@Sayed242]

Dude needs to learn the correct spraying technique. Amateurs