iminoo 6PCS Nail Art Brushes,Double Ended Nail Liner Brush Dotting Pen Nail Art Point Drill Drawing Tools,Double Ended Nail Art Brushe for DIY Nail Art Designs (Style A) www.amazon.com...
Пікірлер: 67
@Junebug602 ай бұрын
I have been painting eyes on jigs for years, Keep the plastic tops off your water bottles and put a drop or two of paint in it and use a short piece of tygon string trimmer fuel line which comes in about 4 different sizes dip the end in the paint and just touch your jig and boom you have a perfect eye and like some others have said a tooth pick nipped off to your liking will make a perfect pupil. When done just throw your bottle cap away.
@rickspence8672 жыл бұрын
Toothpicks work good for the small “pupils”. A bamboo skewer works good too. Cut them down to make the dot sizes you want.
@user-fg2gk3xs6u5 ай бұрын
I just use two pencils I shave one down, and lightly shave the second then I got the eyes on paper until I get the perfect set.
@leonardstevens62412 жыл бұрын
Can't wait to put my order in for 1/64, 1/32, 1/16, 1/8, and 1/4oz. Jigs
@danayo8852 Жыл бұрын
Good tutorial, Eric! I use a short piece of wooden dowel about the diameter of a pencil. Both ends are sharpened in a pencil sharpener. Both points are then ground down. One diameter, smaller than the other. These are used to paint like you’ve instructed. If you want an oblong eye with a round pupil, ground down the larger point on an angle.
@CatfishWeekly2 жыл бұрын
Great way to put eyes on!
@melissaspake7727 Жыл бұрын
Oh my gosh why didn’t I think of this! I have dotting tools in my craft supplies from working with Polymer Clay. Genius idea!
@ericmasseyjigco Жыл бұрын
There’s a lot of other things you can use also but the dotting tools are my favorite
@fuzzyfultz2 жыл бұрын
Thanks Eric. Awesome !
@superdave3362 жыл бұрын
Looks great Eric! Love the colors. Heard most guys use the flat back side of drill bits. This seems like it would work easier with the rounded ball tools. Thanks for sharing Eric.
@bill64672 жыл бұрын
I will definitely chk out those tools. Nice ! I use a a couple different wooden dowels and for the smaller pupils I use the end of a tooth pick.
@vermhot7 ай бұрын
Excellent jig !
@brianculater64442 жыл бұрын
NICCCCEEE……. I like this idea, a little time consuming but I like it 😃 I like that sweatshirt too Sir!! 😃
@donaldmatthews7572 Жыл бұрын
You can get this paint from Dollar General also. I did this for years, but with different size nails that I stuck into a wine cork. The nail art styluses work much better, though. When I first started painting, my eyes on. I was using ball jigs, and stick on eyes do not work real well on round jigs.
@brianlykins66632 жыл бұрын
Great tips and new ideas. I have also seen small diameter silicone fuel line, like used on weed eater and chain saws. Leaves center ( pupil ) same color as jig head. Or you can put small dot of any color in center. Really enjoy your jigs and watching your tying methods. Keep up the great work.
@lorawinfrey9112 Жыл бұрын
I've been using dot mandala tools which come in a large variety of sizes for years also I've recently got into using my UV nail polish and drying it under a UV light which works really well because you can dot it dry it then dot it with the next color dry it boom done
@ericmasseyjigco Жыл бұрын
Sweet awesome tip…. Thank you!
@kingdomcrappielures21172 жыл бұрын
I ordered paint and the dotting tools off Amazon earlier in the week, haven’t had a chance to use them yet. Hope to get in the shop later today to try them out! I like Dennis’ assembly line method; paint it, hang it, move to the next. I bought a small shelf rack to try that, one I can set my UV light on top of to cure them. Fingers crossed for good results!
@larryking6062 жыл бұрын
Eric , Thank you for passing that on , I can really see how that will work and a person can mix or match colors ! Take Care and Be Safe
@Boredoldman2 жыл бұрын
I like it, thanks!
@bidkid202011 ай бұрын
Have you ever tried using Q-tips I paint my own hard bass lures and I use Q-tips to make the black dots on the side
@rickpayne39152 жыл бұрын
I just purchased some of these tools and they were like $6 or $7 on Amazon Thanks for the tip.
@ericmasseyjigco2 жыл бұрын
I like those eyes better than the stick on
@TWeiss1530 Жыл бұрын
Thanks for the quick response. I was really more interested in the Brand.
@stevegreen4132 Жыл бұрын
Gonna try it ! Thanks so much
@dadoutside68192 жыл бұрын
I just use Q-tips. Cut one in half for eye and then whittle other half down to a point and that’s the pupil. Dab paint based on size of eye. I do like your way too.
@MrCobb-rq8iv Жыл бұрын
Match Shaft, toothpick, WD40 straw.
@jbay69462 жыл бұрын
I’m curious to see if the acrylic paint markers would have the same outcome. Great idea, I’ve made my own 3D eyes with a few different hole punches and UV resin but it take a lot of prep and time to do those. Thanks for the video.
@ericmasseyjigco2 жыл бұрын
Those even take some time but I was happy with the out come
@larryduval77012 жыл бұрын
There is a sale on hackle and bucktail at jstokard
@robertheschke58232 жыл бұрын
I really like the video that you painting eyes on your jigs. I do have a question though where do you get the bottle of brush on UV?
@ericmasseyjigco2 жыл бұрын
I buy big bottles off Amazon then add it to the little bottles
@robertchadwick15522 жыл бұрын
That looks excellent. I've tried doing this with Toothpicks with cut out circles of foam paper glued to the toothpicks. Your system looks easier & very good. Can you bake the jigs with acrylic paint on the heads?
@melissaspake7727 Жыл бұрын
I use nail polish and I know you can bake it
@rider660r2 жыл бұрын
Instead of doing that in a vise I'd lay them all out in a line on a table or counter and go through and do all one side.Then if it's a long enough line,by the time you're done the beginning will be dry and just flip it over and paint it. If you're doing round heads or another type other than the pill you'll have to use a vise or put them in something to hold them from rolling around.
@tonywheeler7473 Жыл бұрын
try heat setting with hair dryer makes the paint hard when dry from paint square bills
@joshuaneal4125 Жыл бұрын
Seen one video where he used the magnetic tool holder strip from harbor freight to hold multiple jig heads for painting eyes on
@Newtman_1981... Жыл бұрын
I been using a paint pen
@deanpolk879110 ай бұрын
Love the colors but where do you get the folders it
@TWeiss1530 Жыл бұрын
Eric, what jigs are you using in this video? Thanks so much for the great videos.
@ericmasseyjigco Жыл бұрын
Either 1/16 or 1/8 but I do them from 1/100th up 1/4oz
@ericmasseyjigco Жыл бұрын
Those are mine just round ball head on #4 eagle claw sickle hook
@TWeiss1530 Жыл бұрын
@@ericmasseyjigco thanks.
@leland_tv717 Жыл бұрын
I followed this technique and found out that the eyes wash off in the water because the acrylic paint is water soluble. It needs to be top coated heavily or you need to use other paint. Have you found this to be true also?
@ericmasseyjigco Жыл бұрын
Yes they get Uv resin coated after eyes are painted on
@leland_tv717 Жыл бұрын
@@ericmasseyjigco do you paint the UV resin on? Sorry I prob need to go back and fully watch the video. I appreciate the help. Best Regards, Leland
@ericmasseyjigco Жыл бұрын
Yes I brush it on
@dalebohannon60322 жыл бұрын
go to Micheals and get your paint lot cheaper maybe a couple bucks
@daviddaniels56772 жыл бұрын
Looks good. I wonder if before you tie them if you could hang them in a toaster oven to speed up the drying process! Thoughts!
@ericmasseyjigco2 жыл бұрын
Maybe I was gonna try that and I’m sure i wll
@Coloradoboy7692 жыл бұрын
Eric how long does it take for that paint to dry?
@ericmasseyjigco2 жыл бұрын
It’s not fast not sure exact time but does take awhile
@charlesstonebarger7968 Жыл бұрын
How well will this work on a round head with no pocket?
@ericmasseyjigco Жыл бұрын
That’s a round head no pocket
@edwardbooth1523 Жыл бұрын
Please tell us the name and place to buy that fine vice you are using.
@ericmasseyjigco Жыл бұрын
That’s peak rotary vice
@ericmasseyjigco Жыл бұрын
Got it off Amazon
@Paul-ke5lu7 ай бұрын
#+10k
@TheNick083322 жыл бұрын
Heat set the eyes with a hair dryer
@lenjsmitty6 ай бұрын
I want to know the name of your vise and where to purchase it.
@vermhot7 ай бұрын
What kinda vice do you have ?
@johnthomas5806 Жыл бұрын
we know, most of the color design is for the fisherman, not the fish...lol
@renrut68422 жыл бұрын
What do I order on Amazon to get those tools?
@ericmasseyjigco2 жыл бұрын
iminoo 6PCS Nail Art Brushes,Double Ended Nail Liner Brush Dotting Pen Nail Art Point Drill Drawing Tools,Double Ended Nail Art Brushe for DIY Nail Art Designs (Style A) www.amazon.com/dp/B08JQKQVZH/ref=cm_sw_r_cp_api_glt_i_2YYBRE1E7RH0CMZVEW3W
@rickpayne39152 жыл бұрын
Michael’s craft store has the paint for 99 cents or a pack of 16 bottles for $12.99. I just pick up the 16 pack