Hey Brad, I just retired and started redoing and building guitars. I really enjoy and learn a lot from your videos. Keep them coming!!!!
@BradAngove7 жыл бұрын
I certainly intend to try. Thanks for watching!
@SheepWaveMeByeBye7 жыл бұрын
LOOKS SO DAMN GOOD!!!
@BradAngove7 жыл бұрын
+SheepWaveMeByeBye thank you.
@harenzpiape96184 жыл бұрын
Im so grateful your channel exists !
@BradAngove4 жыл бұрын
I’m glad you’re finding it helpful.
@oliviaweremijenko15687 жыл бұрын
I'm just about to spray my Strat and I've found your videos very instructive. Thank you.
@BradAngove7 жыл бұрын
I'm glad to hear it. I hope your project goes well.
@deadheadbetty66635 ай бұрын
Awesome video man I learned a lot thank you and I guitar turned up great
@BradAngove4 ай бұрын
Thanks
@Screwhead7 ай бұрын
Awesome video! Not quite what I was looking for, but helped me none the less! (I was looking for something that showed matte/gloss/satin finishes on a guitar and what they looked like, but after this, I've settled on matte!)
@BradAngove7 ай бұрын
Glad I could help
@MrJermeyp4 жыл бұрын
Dude you rock, you make stuff I THINK I should know how to do so much more understandable
@BradAngove4 жыл бұрын
Glad I could help!
@Tech215Studios3 жыл бұрын
Great Job Brad! I love your video's man, always super helpful. I did autobody work for about 3 years, started off just doing prep work like scuffing bumpers, then became the owner's painter's assistance. Mixing all the paint for the days jobs, moving all the jobs into the booth and covering, cutting and taping the plastic if we we're painting fenders, QP's, hoods, etc. It was a lot of fun and has really helped personally for my channel as I do a lot of computer case mods and paint jobs. I think the Spray Paint works great and canned clear but I'm going to be investing in an HVLP Gun very soon so I can buy automotive paint from Sherwin WIlliams Auto. This way I can just use single stage and I'll also have way bigger selection of color. Siked to get that going!! Keep up the great work my man!!
@BradAngove3 жыл бұрын
Thanks man!
@1finnigin5 жыл бұрын
Lady here! , love your technique to get the gloss look. I keep giggling tho because I keep getting distracted by Mr. Angove's good looks! ;) anyhow.. focus focus.. lol. Im going to try this gloss technique with a dresser I got. thumbs up.
@BradAngove5 жыл бұрын
I hope it goes well for you.
@1finnigin5 жыл бұрын
@@BradAngove thanks Brad. So far it's working. Just don't go crazy with the spray hahah. It's not hairspray lol. Pshhhhhhh. ..hahah
@sd33zy3136 жыл бұрын
Thanks this is probably the best way to go when trying to paint something high gloss black. Most the time when we paint things we have to sand at it taking away its color trying to make it flat as possible. So why not use flat or mette black with clear coat. Thinks bud it looks so nice
@mascarademermelada87464 жыл бұрын
I've been telling myself that i won't re-paint my old guitar, just change all the electronics but after seeing this video, fug it, i want that kind of finish, it looks so SLICK!
@BradAngove4 жыл бұрын
Haha I’m glad you like it.
@BACzero6 жыл бұрын
OMG that's so cool! I just decided I'm going to hot rod another of my guitars, and I'm doing a matte/gloss combo like that. Love it!
@BradAngove6 жыл бұрын
Glad you like it. I hope yours turns out awesome.
@mdsadiduddin5 жыл бұрын
how do you lacquer both???separately???will the gloss turn matt if i spray matt clear on it???
@BradAngove5 жыл бұрын
If you sand the gloss and spray matte clear over it it will turn matte. Watch my video on how to turn a gloss clear coat matte or satin.
@jacksondreadful77038 ай бұрын
"Do as I say, not as I do" very wise words. Miss you grandpa.
@giannislymperopoylos55746 жыл бұрын
REALLY GREAT ALL YOUR VIDEOS AND HELPFUL..THANK YOU!!!ITS LIKE HAVING A DEEP PIANO BLACK AND A DARK GREY USING ONLY 2 DIFFERENT CLEARS....GREAT IDEA!!
@BradAngove6 жыл бұрын
Thanks. Glad you found it useful.
@lmmnil45743 жыл бұрын
Amazing stuff man. Just what i needed. Ive strarted a project of restoring my guitar and i bit off a little more than i can chew. Ive watched several of your videos now and they sure help close that cap. Im gonna rewire all the electronics, repair dings, fill unused screw holes, move the input, recoat the whole thing etc. I know how to do most of it but coating is not my strong suit as I lack just about any experience/ no one showed me how to. With your vids it ought to be a cake walk. Liked all and subed.
@BradAngove3 жыл бұрын
Thanks Oscar. I hope your project goes well.
@jackjax5327 жыл бұрын
Brad, that is an awesome look--would look great on any guitar. It also answered another question I had. More aerosol can videos please! I'm pretty sure you have mastered aerosol painting.
@BradAngove7 жыл бұрын
+Jack Tate I've definitely got some more spray can videos coming.
@DragonofLimerick5 жыл бұрын
I love the windex trick, because that is what I've used since you mentioned it, used actual grease remover presoaked cloth and was not pleased with that at all.
@ian_humphrey5 жыл бұрын
gonna be using this technique on a goalie mask. great tips! thanks!
@BradAngove5 жыл бұрын
Hope it goes well for you!
@juliantwigden65227 жыл бұрын
My god!!! That looks bloody awesome!!!!!
@BradAngove7 жыл бұрын
+Julian Twigden thank you Julian.
@BrisbaneAOR4 жыл бұрын
This is really great! I’m thinking about building an EVH tribute guitar with gloss stripes, & matte black over the top!
@BradAngove4 жыл бұрын
That sounds awesome!
@der_Schreiner6 жыл бұрын
I thought this was interesting initially. But this is surprisingly awesome! Great tutorial 👌
@BradAngove6 жыл бұрын
Thank you.
@Cactusruss15 жыл бұрын
Video was awesome. As usual, I learned a lot from watching. As a side note, also liked the new countdown intro....Pretty Cool
@BradAngove5 жыл бұрын
Thank you. I’m glad you enjoyed it.
@avery57017 жыл бұрын
That's genuinely beautiful
@BradAngove7 жыл бұрын
+Avery Collins Thank you.
@alfie21987 жыл бұрын
Hey brad ! Love the videos ! I was wondering if maybe you could do a video of spraying a guitar with a stencil (with the matte finish)
@BradAngove7 жыл бұрын
Hang tight. I think the one coming out next Friday might be what you're looking for.
@chrispost19935 жыл бұрын
The 3m blue tape, designated "edge lock" has a little less adhesive. Traditionally in residential painting we use the green tape for blocking oil base and for exterior surfaces as well as being the only effective type to mask off masonry, such as brick or concrete, from spraying with an airless machine
@brenolabs25324 жыл бұрын
Brad, if we inverted the paint job? (Make the all body in gloss finish, and put some stripes to keep gloss, would be easier? My idea is a EVH guitar, all matte black with gloss stripes. Awesome video btw!
@BradAngove4 жыл бұрын
You would need to sand the stripes to put the matte overtop if that’s what you mean.
@tdlvsabs7 жыл бұрын
hi again brad, im planning on a triple black strat build with a gloss body and matte black sort of burst thing , ill have to send up a pic when its done.
@BradAngove7 жыл бұрын
That sounds awesome. I'm excited to see how it turns out.
@pedroreyes46707 жыл бұрын
Simply awesome. Congrats.
@BradAngove7 жыл бұрын
+Pedro Reyes Thank you sir.
@kingjack89984 жыл бұрын
Badass video
@BradAngove4 жыл бұрын
Thanks
@sam1270017 жыл бұрын
another great one ! Thanks for the content.
@Quimerateck7 жыл бұрын
gonna make some masking art tonight, and paste the tribal patern into the guitar, wish me luck
@BradAngove7 жыл бұрын
+Quimerateck Good luck!
@megazone23373 жыл бұрын
great ! i wanna try it,too.
@bipolarbear14504 жыл бұрын
nice ! i might try this on my old e-guitar.Greetings from ph.
@Monomonmamon4 жыл бұрын
Im from PH too, are bosny any good? I've been only using krylon paint and wanted an alternative due to the quarantine thing
@bipolarbear14504 жыл бұрын
@@Monomonmamon they're both good but i prefer bosny because it's cheaper lalo na kung marami kang kulay na gagamitin makakatipid ka.Pero kung meron akong budget i'll go with krylon , pangmalakasan talaga krylon hehe.
@tylercooper37275 жыл бұрын
That looks hella sick🎸🤘🏼
@GoProGoalieUzi6 жыл бұрын
Ok perfect!! So...I’m starting with the back plate on goalie mask. Sanded prepped and based white. I added the vinyl wording, now will hit it with rustoleum flat black. Once it dries I will use spray max 2k for the clear...I’m looking for that wet finish...I think I will be ok!!!! Right? lol
@BradAngove6 жыл бұрын
Sounds like a reasonable plan. I hope it goes well for you.
@ledassz2 жыл бұрын
Hi Brad, Put very simply, I have a design on paper which requires some gloss white, next to matte black. I wanted to do it as follows: - Paint the base coats - Tape of the part I want in black later and paint the white gloss base colour on the un-taped spots (----> other option is to not tape anything now, and put the gloss white on the whole body first) - Lightly sand base coat - Paint the gloss clear coat on the white base - Polish - Remove tape - Tape of the already painted white gloss - Lightly sand base coat - put on the matte black base colour - Matte clear coat - Remove tape So you would have a nicely polished gloss, in combination with a matte finish next to it. Do you think this process could work? Regards, Lenny
@BradAngove2 жыл бұрын
Hi Lenny, yes I think that process could work as long as you are careful about the polishing.
@bdubberz6 жыл бұрын
Want to do a gloss black top with satin back and sides... Thinking: 1. Primer 2. Flat black 3. Satin clear on everything 4. Gloss clear on top over satin clear. Will this work well if i sand between coats obviously?
@BradAngove6 жыл бұрын
That should work fine. Or you can just coat the whole thing satin and polish the top to a high gloss. That would avoid any tape ridges.
@casperboo54656 жыл бұрын
Thats A Great Finnish Brad, Thank You For Sharing, Cheers
@BradAngove6 жыл бұрын
Thanks for watching.
@SeanDiegoOfficial3 жыл бұрын
Killer work as always, Brad! After watching this, is it safe to assume that I can apply gloss clear coat over a satin/matte color and it will appear glossy with no problems?
@BradAngove3 жыл бұрын
Yes sir
@JeanClodVanShot7 жыл бұрын
Eeey, greetings from Russia! Thanks for great content!
@BradAngove7 жыл бұрын
+Vashpe Vashpevich thanks for watching
@BradAngove7 жыл бұрын
+Vashpe Vashpevich thanks for watching
@budandbean17 жыл бұрын
Thanks Brad, that's a great look! Question, If you have a nitrocellulose painted guitar now, can it just scuffed up good and painted over with a solid like this black? Then use these different clear coat sprays... i just hate to strip it just to paint it again. Thanks
@BradAngove7 жыл бұрын
+Buddy Martin as long as the nitro is fully cured that shouldn't be a problem.
@chrisworx89674 жыл бұрын
Nicely done I have a question Brad, did it took days or just hours to dry the matte clear before you put on the tape? cuz I have tried to do that matte and gloss finish, but when I removed the tapes, they were markings left on from the tapes. I have also used painters tape and also dried my project for a couple of days before applying the gloss hope you could help Thanks
@BradAngove4 жыл бұрын
I did this all in one day if I remember correctly, but if you don’t use the correct re-coat times or if you apply your paint too thick it won’t dry properly and will peel off.
@chrisworx89674 жыл бұрын
Thanks for the tip bro👍
@ericdpeerik39282 жыл бұрын
How many spare guitar bodies do you have that you just do quick video paint jobs on? 🤔
@BradAngove2 жыл бұрын
Not that many these days. I tended to use the same 2 or 3 for all my videos. I do have a bunch of bodies; I just don’t use them all for this.
@ph1p8987 жыл бұрын
hey Brad. Love the videos. im currently painting a guitar and I'm doing a "golden teak" tinted varnish on the front. i was planning to do this gloss/matte black style for the back and sides of the guitar. I don't want to mix finishes so would it work if i was to brush on a matte varnish, let it dry, then mask and brush on a gloss varnish? both varnishes are oil based and it would be going over rustoleum primer, and rustoleum flat black
@BradAngove7 жыл бұрын
You should have no problem putting a coat of gloss varnish on top of a dried matte varnish finish. The part that concerns me is brushing varnish over the flat black. I've never done it, so I suggest you test it out before you do it on anything important. It sounds risky to me.
@legacymusic8355 жыл бұрын
Oooo I like that!
@scottpeters44013 жыл бұрын
When spraying a matte clear,do you have to sand and polish like you do a gloss clear coat?if not,how do you get rid of orange peel?
@BradAngove3 жыл бұрын
No, you can’t polish matte clear. You just have to get it even when you spray it.
@robertrichards88965 жыл бұрын
Thanks so much for this video and many of your others they have given me tons on useful info I was having a hard time finding anywhere else, I am redoing a guitar of mine with a similar 2 finish look. I'm looking to do a gloss neon color base coat with a Satin black top coat any advice?
@BradAngove5 жыл бұрын
Is there a reason you’ve chosen to do it in that order?
@robertrichards88965 жыл бұрын
@@BradAngove I was thinking of doing a Frankenstrat like paint job with lots of lines and thought it would be easier to put the high gloss down first and tape it off scuff it up then add the satin ?
@BradAngove5 жыл бұрын
That should work fine as long as you’re careful about dry time.
@robertrichards88965 жыл бұрын
@@BradAngove I was planing on letting the gloss coat fully dry before I did the tape up and prep for the satin. Should I buff and polish the gloss before I tape it up?
@BradAngove5 жыл бұрын
Yes, you won’t be able to do it after. Just make sure you carefully clean and scuff the areas that you are painting over afterward.
@christianespina54336 жыл бұрын
Nice video bro can I ask if you still used a primer before painting or you just direct to matte black?
@BradAngove6 жыл бұрын
I had about 5 paint jobs on this guitar when I did this haha, but if it already has a paint job you can just sand it a bit with 400 grit and then go straight to your matte black. If it’s on a fresh, unpainted surface you will want to prime it.
@locosenrutaEc904 жыл бұрын
What’s the brand of the clear coat you used for the gloss finish?
@BradAngove4 жыл бұрын
Rustoleum 2x crystal clear.
@martylathrop55496 жыл бұрын
Can I reverse that if my guitar is already gloss black and I want to spray Matt lines in it
@BradAngove6 жыл бұрын
You would need to scuff those lines first in order to allow the matte clear to stick
@Metal_Jim_in_TX4 жыл бұрын
@@BradAngove I want to do the same thing, on a gloss metallic dark gray guitar with I guess a clear poly coat. Kind of imagining red pinstripes on the edges of the matte black stripe. 600 grit paper would work or should I go finer? Old video, I know but it's really inspiring, thanks.
@guitarguide4074 жыл бұрын
How can I purchase the paint and of which company I have to polish and colour my black grail guitar it is for home purpose I need a black paint and glossy sprey I cheaper
@guitarguide4074 жыл бұрын
I need a cheaper price paint
@brexxebender12045 жыл бұрын
The problem with taping is that there is ALWAYS a small lip on each side of the striping.. The best way to combat that problem is to buy Graceys Nitrocellulose lacquer paints. They're a bit pricey, but WELL worth it. Then u get 1200 grit wet sand, use warm soapy water and gently sand the edges. It's a tedious job, but if u want your axe to look good, you'll put the time in. I do custom fenders for alot of people and have sold a bunch as well. Basically I do custom shops for half the price
@BradAngove5 жыл бұрын
Using soapy water to sand a nitro job is asking for trouble my friend.
@brexxebender12045 жыл бұрын
@@BradAngove Actually, it's how you're supposed to do it lol... I'm talking about a nitro + lacquer mix... Like Graceys Vintage finishes sell... Its a general rule to do so to have the mirror finish. I do it all the time.
@BradAngove5 жыл бұрын
It’s old school and risky. That’s why nobody does it anymore. Using soapy water is entirely unnecessary.
@brexxebender12045 жыл бұрын
@@BradAngoveThose who do good custom work still do.. ya cant just spray it and that's that.. lol.. if ya dont use soapy water on nitro lacquer, you'll just have sloppy scratches... how do u stand nitro lacquer to a mirror finish?
@BradAngove5 жыл бұрын
With high quality high grit paper. Then I polish it obviously. Just like most who uses modern techniques to achieve quality results. The water is less of a problem on something like this than it would be on nitro, but still not worth the risk as it doesn’t actually accomplish anything if you’re using good paper.
@fairmonttech-nmedia4 жыл бұрын
Could I use a colored gloss over a clear matte finish I already have on an alder guitar?
@BradAngove4 жыл бұрын
If you sand/prep it first, yes.
@gumz41835 жыл бұрын
Hey! I have a question about the matte clear coat. Does that coat hold up to repetitive playing? Like does it get glossy at parts of the guitar due to repeated use?
@BradAngove5 жыл бұрын
Yeah, it tends to gloss up a bit from rubbing. Have a look at my video on the problem with matte finishes.
@st3ange216 жыл бұрын
Nice job! Really cool indeed but i've got a question! If you apply more layers of matte clear coat does it affect the result?
@BradAngove6 жыл бұрын
What do you mean? More base layers?
@st3ange216 жыл бұрын
Brad Angove I mean spray the matte more times. Will I get a mattier finish?
@BradAngove6 жыл бұрын
You won’t get a matter finish. It will just be thicker.
@st3ange216 жыл бұрын
Brad Angove ok, got it :) thank you
@BradAngove6 жыл бұрын
You’re welcome.
@taraplacencia72594 жыл бұрын
How do you recommend painting a piano with spray cans with that black mirror finish????
@BradAngove4 жыл бұрын
To put it bluntly, I don’t. Pianos, at least of the acoustic variety, depend heavily on resonance. You can’t just spray whatever you want on them and expect them to sound the same.
@taraplacencia72594 жыл бұрын
Is there anyway to achieve this look at home?
@BradAngove4 жыл бұрын
Pianos used to be done with a hand rubbed finish that can technically be done at home, but it will be somewhat toxic and smell terrible for a long time.
@sebastianfrench67563 жыл бұрын
i want to give my go kart a glossy look but it is matte rightnow so should i use clear coat to give it the glossy look
@BradAngove3 жыл бұрын
That’s probably the easiest way yes.
@VintageSlide4 жыл бұрын
Can i put gloss clearcoat over a matte finish body to make it a gloss finish?
@BradAngove4 жыл бұрын
Yes. Just scuff the matte finish a bit first so it will stick.
@darrenhirons58704 жыл бұрын
Thanks for the video Brad. I'm wondering if i do a similar paint job whether i would then need to apply clear coat? With it being a mix of matte and gloss my guess is it wont be possible to clear coat it?
@BradAngove4 жыл бұрын
The clear coat is what I used to crest the matte and gloss finish. It’s matte and gloss clear coat.
@derekmitt234 жыл бұрын
How would I protect the matte from UV damage. I'm planning on doing a gloss and matte on my Jeep wheels. Thanks
@BradAngove4 жыл бұрын
Use a high quality matte clear with built in UV protection.
@derekmitt234 жыл бұрын
@@BradAngove thanks
@girinathperiyasamy1895 жыл бұрын
I used shine red color spray paint. But it gets dull day by day.. is there any transparent overcoat to keep the shining as it is
@BradAngove5 жыл бұрын
If you sand it and clear coat over it it should hold its gloss, but it’s odd that it would be losing its sheen.
@alexgl4 жыл бұрын
After level-sanding with 600 grid and a grey scotchbrite before clear-coating, i still get the "orange peel" surface... Its ok with fine-polishing, but it really DEMANDS it... Otherwize it is not as glassy as yours... I use MOTIP, which is a good brand... any ideas of what im doing wrong?
@BradAngove4 жыл бұрын
If you're still getting orange peel you just haven't sanded it completely flat.
@alexgl4 жыл бұрын
Brad Angove oh i see... maybe i should use 600 and then some lighter grade to avoid sanding through. Lets say, up to 1500...
@BradAngove4 жыл бұрын
Yes, have a look at my videos on sanding and polishing.
@davewright50246 жыл бұрын
That's sweet!!!
@BradAngove6 жыл бұрын
Thanks Dave.
@9ernation6 жыл бұрын
I have a question, do you think you would get the same result if you just sprayed a gloss clear coat over just flat black, or do you recommend doing flat black, then matte clear coat, then gloss clear coat? I’m looking to get a really reflective finish. As mirror like as possible.
@BradAngove6 жыл бұрын
You would get the same effect, just less durable.
@9ernation6 жыл бұрын
Okay, I will take that into consideration. Thank you for the response!
@BradAngove6 жыл бұрын
You’re welcome.
@jama015 жыл бұрын
What kind of protective paint do you use (at the end of the paint process) to keep the glossy and matte effect?
@BradAngove5 жыл бұрын
The gloss and matte clear coats are protective paint.
@jama015 жыл бұрын
@@BradAngove I thought you had used two black paints... one matte and one glossy!
@bullchef87395 жыл бұрын
How about matte clear coat over a gloss base paint? Thanks in advance for the answer
@BradAngove5 жыл бұрын
That’s fine. You just need to let the base dry and sand lightly with 800 grit before you clear coat.
@bullchef87395 жыл бұрын
@@BradAngove thank you
@brandonloukota47603 жыл бұрын
Can you do this in reverse? Gloss the whole thing and then mask off and do matte?
@BradAngove3 жыл бұрын
Yes
@alanburgess75195 жыл бұрын
What clear are you using? Thinking of doing a matte helmet.
@BradAngove5 жыл бұрын
This was just the rustoleum 2x crystal clear.
@guidodelgiudice56 жыл бұрын
Can you do the reverse of it. Glossy underneath and matte clear coat on top. Would that give same pattern finish?
@BradAngove6 жыл бұрын
Yes, but you would need to scuff the gloss in those areas to get the matte to stick properly.
@guidodelgiudice56 жыл бұрын
@@BradAngove you deserve a big thank you.
@everydayshowday51514 жыл бұрын
🤯😱 SIIIICK!
@Swanlord057 жыл бұрын
Hey brad I am gonna finish a duplicolor sprayed guitar with poly surfboard resin will it work
@BradAngove7 жыл бұрын
+Jim Pittman I have no idea. I've never tried poly surfboard resin.
@LetishaR095 жыл бұрын
What kind of matte spray would you recommend
@BradAngove5 жыл бұрын
The best one in a can in my opinion is the spraymax 2K.
@TheBrintz6 жыл бұрын
I want a matte finish on my guitar. How many layers do you suggest? Also. I sprayed 3 layers of primer (AMATEUR) and i saw many flaws on the guitar. Any suggestion?
@BradAngove6 жыл бұрын
What kind of flaws are we talking about here?
@edgarmc64875 жыл бұрын
what do you do if your item is whole gloss and you want to spray it in matte ? do you sandpaper it first or direct spray matte not using sandpaper first ?
@edgarmc64875 жыл бұрын
pls reply
@BradAngove5 жыл бұрын
Have a look at my video on how to turn a gloss finish matte or satin.
@orlandotovar43187 жыл бұрын
What about on an acoustic guitar?? Can you paint it too??
@Felisargyle6 жыл бұрын
Orlando Tovar you can but no one does that they like the color of the wood and they normally apply shlac
@BradAngove6 жыл бұрын
Did I never answer this? I must have missed it somehow. I’ve done an acoustic on this channel before. You just have to use the right type of paint so you don’t screw up how it sounds. The paint I used in this video would be a poor choice.
@adammoran78496 жыл бұрын
In my opinion, "paiting" an acoustic guitar takes a huge chance of messing up the sound.
@HAIRHOLIC_16 жыл бұрын
Sorry I wasn’t even listening just admiring your beauty 😍
@BradAngove6 жыл бұрын
It’s ok. I wasn’t saying anything important anyway...
@HAIRHOLIC_16 жыл бұрын
Brad Angove you don’t have to 😻
@inhelliburn895 жыл бұрын
Which spray are you using?
@BradAngove5 жыл бұрын
Rustoleum painters touch crystal clear
@inhelliburn895 жыл бұрын
@@BradAngove thanks a lot!
@jwood69023 жыл бұрын
Maan, I just left the tape on mine and skipped the spraying. #custom #dazzle #donelazy
@homebaked17317 жыл бұрын
Were you using clear coat or black spray paint?
@BradAngove7 жыл бұрын
+R- Silver Clear coat.
@ibrahimsaid55126 жыл бұрын
Where can I order that Gloss spray?
@BradAngove6 жыл бұрын
Home Depot?
@BowDownBullies7 жыл бұрын
can i use that to make my matte black hood on my car to make it shine instead of the matte look??
@BradAngove7 жыл бұрын
+Gee Mann You can. The easiest way to do it would be to scuff the hood lightly and then apply a coat or two of gloss clear.
@kwwhiteaker9 ай бұрын
What happens if I do pull up some clear on edges?
@BradAngove9 ай бұрын
Of the matte finish?
@michaelbritton41196 жыл бұрын
Doing a matte/gloss pattern like this- wouldn’t it be easier to start with a full gloss coat, already polished (if desired) and then mask off and then add the matte?
@BradAngove6 жыл бұрын
The matte won’t stick properly to a polished gloss.
@michaelbritton41196 жыл бұрын
Brad Angove - even if you scuff it up before you apply the matte? It seems to me that you’d be able to get an even polish and make it even if it went that way. Regardless- it looks pretty cool bud! Looks like darth Vader’s chestplate the way you did it
@BradAngove6 жыл бұрын
If you dewaxed it and then scuffed it that should work out.
@isaacquinton-krznar43245 жыл бұрын
Can somebody pleasee tell me why I get spraypaint dots.. then once i sand it. Some of them make holes straight back to the frane of the bike im painting!
@BradAngove5 жыл бұрын
Generally that is from surface contamination. You need to make sure you properly abrade and clean the surface. On metal you also need to ensure that you’re using a metal compatible primer.
@zachbaldwin22967 жыл бұрын
Would this work with different colors? I want to do a green matte with a kinda sparkly gloss white stripes, my question is would i do the whole thing the dark matte green then just white over top in the spots where i want the gloss white stripes? Or would the green be too dark to work with white gloss? I hope that makes sense
@BradAngove7 жыл бұрын
+Zach Baldwin it's doable. Building up a fully opaque coat of white for the stripes might take some work. It may be easier to do it backward. Use a while base and go overtop with the green.
@zachbaldwin22967 жыл бұрын
Brad Angove thats what i was thinking doing it backwards
@zachbaldwin22967 жыл бұрын
Brad Angove thanks for the reply! Your videos have been so helpful!
@BradAngove7 жыл бұрын
+Zach Baldwin Sounds like a reasonable idea.
@BradAngove7 жыл бұрын
+Zach Baldwin You're welcome. Thanks for watching.
@video6411 ай бұрын
Spraying 2K without a respirator?
@BradAngove10 ай бұрын
No, I didn’t spray any 2K in this video.
@Jackson1959.5 жыл бұрын
Can we dry it quick with hair dryer as soon as we spray
@BradAngove5 жыл бұрын
You can, but it’s risky as far as ensuring proper curing goes.
@Jackson1959.5 жыл бұрын
Bro kindly check fb
@joaquinvives52725 жыл бұрын
What gloss are you using because you don’t specify it exactly?
@BradAngove5 жыл бұрын
It’s just their crystal clear gloss.
@joaquinvives52725 жыл бұрын
Thank you and keep up the great work
@kevinlivingston95637 жыл бұрын
What if your project started with gloss black? Could u just tape it, scuff it then hit it with flat clear?
@kevinlivingston95637 жыл бұрын
Damn I typed that too soon!
@BradAngove7 жыл бұрын
+Kevin Livingston Should I assume your question has been answered?
@kevinlivingston95637 жыл бұрын
Brad Angove you mentioned it in the last few seconds of the video. Haha
@fedevives49385 жыл бұрын
Could this work as a gloss for an entire guitar?
@BradAngove5 жыл бұрын
I’m not sure what you mean. Are you asking if you can paint a guitar gloss black?
@joaquinvives52725 жыл бұрын
Another account, yes. Could you use the same supplies to paint the whole guitar gloss black.
@BradAngove5 жыл бұрын
Yes.
@nileshgaonkar7735 жыл бұрын
Online link plz for sprey can you use
@TruongMtgArenaHearthstone036 жыл бұрын
Which product did you use for this one?
@BradAngove6 жыл бұрын
Rustoleum 2x clear.
@TruongMtgArenaHearthstone036 жыл бұрын
Brad Angove semi gloss?
@BradAngove6 жыл бұрын
Gloss and matte.
@jomariepascua46233 жыл бұрын
what will happen if you top coated that color with clear?
@BradAngove3 жыл бұрын
I’m not sure what you mean. That pattern is done with clear. The whole guitar is clear coated.
@jomariepascua46233 жыл бұрын
i mean when you add a clear paint in flat and gloss black will the flat black change its color or will the flat and gloss black will going to by the same color
@BradAngove3 жыл бұрын
They both have the same color underneath. Just different sheens of clear.
@sd33zy3136 жыл бұрын
Ive done a car using gloss black only to find out later that the car didnt turn out black. Its more like a greyish color because of the wet sanding faded the color
@BradAngove6 жыл бұрын
Did you polish it after?
@sd33zy3136 жыл бұрын
Brad Angove yeah
@BradAngove6 жыл бұрын
Did you use clear coat?
@sd33zy3136 жыл бұрын
Brad Angove no the Rustoleum gloss black has clear coat in it so no i didnt use Any. But i did notice when i used Rustoleum clear then yeah the color turned blackish. Somewhat
@sd33zy3136 жыл бұрын
Brad Angove my ultimate goal is to get the factory look from a sprey can on a car. Since most of us dont own a compressor to do the job right with
@lazybastardooo6 жыл бұрын
I had same idea for my gas tank but i was afraid that edge between gloss and matte will be ugly (that it would look like sticker)
@BradAngove6 жыл бұрын
That’s definitely a possibility depending on how it’s done.
@siddheshwarshashetti5 жыл бұрын
Colour of paint 24 hour after the petrol diesel drop this part colour removed yes ya no please answer
@BradAngove5 жыл бұрын
You need proper automotive clear coat.
@siddheshwarshashetti5 жыл бұрын
Which brand spray used
@BradAngove5 жыл бұрын
Check my video on how to get a professional looking clear coat with spray cans. That’s the one.
@raphaelnaval12427 жыл бұрын
Can you do it on a xbox or ps controller?
@BradAngove7 жыл бұрын
Yes, but you should use adhesion promoter to help the paint stick to the plastic. Check out my video on how to paint plastic parts properly if you want more info on that.
@Raj81410 Жыл бұрын
Spray name
@madhavid83673 жыл бұрын
Can u just say the name of gloss black spray paint
@BradAngove3 жыл бұрын
The name? I was using rustoleum painters touch paint.
@LonePyroWolf6 жыл бұрын
Looks like a Darth Vader Guitar!
@BradAngove6 жыл бұрын
Interesting connection.
@napadaanlng693 жыл бұрын
Why my flat paint looks gloss after spraying?
@BradAngove3 жыл бұрын
They’re wet.
@napadaanlng693 жыл бұрын
@@BradAngove which one is wet? the base coat or the clear coat? I might have sprayed my clear too early :(
@BradAngove3 жыл бұрын
That could be. Does the matte still look glossy?
@napadaanlng693 жыл бұрын
@@BradAngove It still is and its been days already.
@BradAngove3 жыл бұрын
Ok, what kind of paint did you use for the base, what grit did you sand it with, and which matte clear did you use?