How To Paint Your Car With A Roller

  Рет қаралды 810,218

Braden Carlson

Braden Carlson

Күн бұрын

Пікірлер: 428
@BradenCarlsonAutos
@BradenCarlsonAutos 5 жыл бұрын
Don't forget to Subscribe for more car content!
@jayr7583
@jayr7583 Жыл бұрын
Always use *flood penetrol*
@rrichards31
@rrichards31 6 ай бұрын
I painted my entire life and always laughed at foam rollers. Now I'm the biggest fan. I never paint cabinets except with foam rollers. I'm fixing to paint my truck with a foam roller and I know I can do a better job than spraying after wet sanding.
@olblu8746
@olblu8746 6 жыл бұрын
Your granma loves you alot. There aren't many like her, try to help her as much as possible, cut the grass, wash her car, even wash the dishes, she deserves it. I wish I had a granma like her. Tell her I love her, because she is what I didn't have . God bless. Also your little bro. was helping you without complaining .You are blessed and highly favored.
@zombieepx1933
@zombieepx1933 5 жыл бұрын
I repainted my entire 2003 Nissan Pathfinder LE with Rustoleum black glossy. I used 4 inch wool mini rollers and the outcome was better than any Maaco paint job I’ve had with a longer warranty as well.
@jeromemalveaux3790
@jeromemalveaux3790 2 жыл бұрын
Tell me more
@zombieepx1933
@zombieepx1933 2 жыл бұрын
@@jeromemalveaux3790 basically in short I thought it’d be an awful idea, needless to say the outcome was 10/10. Highly recommend this to anyone as broke as I was at the time 😂
@deidretal2500
@deidretal2500 2 жыл бұрын
May I ask how much you thinned it?
@SOLDOZER
@SOLDOZER Жыл бұрын
I doubt that....
@zombieepx1933
@zombieepx1933 Жыл бұрын
@@SOLDOZER all facts
@buzzclark
@buzzclark 9 жыл бұрын
Hi I think painting an old car with a brush or roller is the best way to preserve a car that still has a lot of life in it. My dad painted both his cars with a brush and rust-o-leum and he hardly ever washed them ever again and both cars never rusted ever again. "NEVER PUT MONEY IN THE BODY OF A CAR - IT'S MONEY YOU NEVER GET BACK OUT OF IT". Thanks. Sincerely, JAMES.
@andrewlowrey9466
@andrewlowrey9466 2 жыл бұрын
What a great family you have everyone helping out. Thanks for sharing.
@Kaylem13
@Kaylem13 6 ай бұрын
Tip for wet rollers and brushes - just get excess drip paint off then put in air tight plastic bag twisting the bag then around the handles = wet, steady to go in the morning without washing, throwing away and never ending cleaning. Keeps the roller / brushes wet and fresh.
@Captainpook12
@Captainpook12 6 жыл бұрын
I painted my firebird with a four inch roller and it was shiny and looked better then a spray can job and I didn’t have to worry about my neighbors bitching about getting over spray on there cars parked down the street.
@1234tellmewhatyourlookingfor
@1234tellmewhatyourlookingfor 7 ай бұрын
All I'm trying to do after multiple coates is to get my plastic pathfinder front bumper smooth. From a distance ,it looks good, but up close you can see imperfections. I'm using same spray paint that was made for plastic and pre primed,so I think I will spray small roller then apply.
@1234tellmewhatyourlookingfor
@1234tellmewhatyourlookingfor 7 ай бұрын
Yep, that is typical bored neighbors.
@fdghn4567
@fdghn4567 2 жыл бұрын
In 1987 I painted my VW camper in black hammerite, it had prevoiusy been done badly in silver with heavy runs in places, which I flattened out. I used a 9" gloss roller and a 2" gloss brush and the finish was perfect, even had a couple of people ask me where I had it done and they were suprised when I told then how I did it.
@riuuku
@riuuku 8 жыл бұрын
love that grandma is helping
@MrOntap00
@MrOntap00 8 жыл бұрын
I just put way to much money into my old dodge truck so this would be the way I'm going to end up painting it. great video thank you!
@BradenCarlsonAutos
@BradenCarlsonAutos 8 жыл бұрын
+Kurt Wilson Right on! There's a video on youtube somewhere of a guy roll painting his whole truck and it comes out pretty nice!
@mermaiddiyartist8119
@mermaiddiyartist8119 4 жыл бұрын
Yes!!! I’ve been wanting to do this too. Did you ever do it?
@multi-hobbyist1568
@multi-hobbyist1568 9 жыл бұрын
I thought it was awesome that the woman was helping you. Im sure she had better things to do but, she loves you and, just wanted to be involved.
@Cricis11700
@Cricis11700 7 жыл бұрын
Multi-Hobbyist She honestly could have been making him a sandwich.
@Parnell_Eclair
@Parnell_Eclair 3 жыл бұрын
🏆🖌 This is one of the better DIY vehicle roller paint job videos out there. When you see the before and after shots you have to agree: it's 100% better-- and the metal is now protected. I especially like that there was no annoying-- and often crappy-- background music playing as he spoke. Grandma in the background was a nice touch. She appears ready to spring into action if asked. 👵🏻 👍🏻
@Buzzhumma
@Buzzhumma 7 жыл бұрын
I have painted lots of old cars and trucks this way bro . With skills it totally legit and comes up really good . I appreciate your courage in putting your self out their bro 😊stay strong and fuck those haters 😂
@caliwooddetail
@caliwooddetail 5 жыл бұрын
What type of paint did you use? I’m looking to paint my van a baby blue!
@juanr4195
@juanr4195 5 жыл бұрын
@@caliwooddetail awwwww😍😍😍
@djtechinics97dj37
@djtechinics97dj37 5 жыл бұрын
Only people that pay $2,500 for paint job and still have runs, orange peel and bugs and dirt embedded in the paint hate this video. This guy is a genius car painted for less than $50. I’ve painted cars like this before too.
@fernandomartinez5812
@fernandomartinez5812 4 жыл бұрын
Keep up the good work dude
4 жыл бұрын
Ive done it 3 times. Always white satin. Nobody has ever noticed. Saved thousands on paint jobs
@BethPereraPositivelyPlants
@BethPereraPositivelyPlants 2 жыл бұрын
Getting ready to repaint my '08 Honda Element, and wanted a reliable DIY method... loooove the Rustoleum plan! Thanks for your tips on rollers, # coats, etc. I'm off-grid, no garage, so I may have some leaves and pine needles sticking... haaaaaa!
@AlfonsoGudino-l1f
@AlfonsoGudino-l1f 22 күн бұрын
I just bought some tractor paint and I am gonna paint some of my car parts with it. Keep it up.
@1blondied
@1blondied 7 жыл бұрын
Do you think you can clearcoat with this method?
@wamindustries
@wamindustries 6 жыл бұрын
if you do it again you may want to add a hardener... bird droppings will break rustoleum down.
@paulanger2048
@paulanger2048 5 жыл бұрын
I did my truck a little bit ago in half hunter green/half white it's a sort of mint that changes more lime when light hits it. It came out sort a cool satin. Everyone including me likes it! I don't want to clear coat it, I'm afraid to mess around with the finish. You would have to see it, it looks really cool! Does anyone know if waxing will protect it?
@shawnzackey6298
@shawnzackey6298 3 жыл бұрын
What do you wet sand, cut, and buff with? Be specific with grits, compounds, and sanders, please. Thanks!
@clayguy33
@clayguy33 Жыл бұрын
Nice ! Wonder if I could use flat black!
@sinbad20001
@sinbad20001 7 жыл бұрын
I did this years ago using both spray and roller. I didn't thin the paint, I added Penetrol and it worked GREAT! Also, never reuse a roller when you can afford a new, clean one. Just sayin. Car turned out so good that I had request to paint other people's junkers! LOL
@minsocollins242
@minsocollins242 6 жыл бұрын
sinbad20001 ....what's pentrol?
@smallfrey47
@smallfrey47 6 жыл бұрын
Penetrol is a paint additive that can extend oil-based paint without thinning it. The dry time is longer, but the finish tends to be smoother. By extending the dry time, you can go back and touch up within a longer period without dragging the paint. Takes longer to get tacky. Floetrol is their product for latex paints, and is helpful when painting on warm days.
@jeromemalveaux3790
@jeromemalveaux3790 2 жыл бұрын
You’re actually correct I forgot about that lol
@nosoyono1081
@nosoyono1081 4 жыл бұрын
First thing you need to use self leveling paint if your expecting no Oregon peal. The best place to find the self leveling paint is at a farm supply store. It’s called Tractor 🚜 paint. It cost around 35 bucks a gallon. But you don’t need primer or reducer you just clean the serfs and then roller it on with a sponge roller put 1 cot on what 15 to 24 hours thin apply a second cot wait about four days then you can put decals or pinstripes or spray paint over it. You can also wet sand and buff it too
@Sroor90010
@Sroor90010 7 жыл бұрын
Hi where is the 2nd video want to see wet sanding and clear coat
@tomadams5359
@tomadams5359 7 жыл бұрын
Excellent use of editing! I hate watching videos with long drawn out monotonous segments. You got your info clear and sped up other crab. Awsome!!
@leeverink32
@leeverink32 8 жыл бұрын
this is actualy a house hold tip: ceep the roller in a plastic bag and the roller is good to use the next day!. i cant say this works with car paint but wall paint is 100% good to go the next day!
@dynocompe
@dynocompe 8 жыл бұрын
+otto leeverink it will work with this paint, its just rust metal paint, I keep mine in any grocery bag, seal it up best i can, and put it in the old fridge. never dries out that way, no need to clean it, i would never clean a oil based roller lol!
@zoesmith1755
@zoesmith1755 5 жыл бұрын
Wouldn't work here so much. He used spirits to dilute the paint which will dissolve plastic bags. The stuff even dissolved a pair of rubber gloves off my hands
@timheasman2984
@timheasman2984 4 жыл бұрын
Also wrap in foil, seal in baggie then place in freezer
@2litrepeter.
@2litrepeter. 7 жыл бұрын
Good stuff. It's an effective method for those that want to try the faux patina look. Lay down a few different colours and sand through.
@Ka3Ty
@Ka3Ty 4 жыл бұрын
I'm wanting to try roll and tipping, run a 4" roller for even disbursement of paint in one direction and barely drag a quality paint brush in the opposite direction over small sections rolled out, to remove air pockets and bubbles caused by the roller. I want to try penetrol instead of thinner in order to remove most all brush marks, and add a couple % of enamel hardener for harder most luster finish. It supposed to lay as flat as spray and equal the shine. The extra supplies needed would likely only cost as much as the extra sandpaper you need.
@FlyerPhilip
@FlyerPhilip 4 жыл бұрын
When removing a hood or in Britain, bonnet. I always (try) to sink a self tapping screw in the both arms as well as the hood crash framework. This way it takes all of the guesswork out of remounting. Just My thoughts.
@connerbaldwin8405
@connerbaldwin8405 3 жыл бұрын
If using a roller is an approved method of painting airplane panels than its more than good enough for cars as long as you're not looking for something too smooth, its gonna have a slight rough texture to it, but its way better and not to mention easier than using a can of spray paint, trust me
@SOLDbyYOU
@SOLDbyYOU 6 жыл бұрын
ONCE YOU APPLY THE PAINT.........if it has been more than just a few seconds....DO....NOT........ROLL ( or brush) ...BACK ....OVER..... THAT ....AREA........ until after the paint has significantly firmed up. Even though it LOOKS like orange peel..... DONT TOUCH IT...... it will somewhat " lay down" or " self level"... but... If you re-roll or rebrush over paint that is more than a "minute old".... VERY shortly after paint is initially laid down, it starts to dry, first by skinning over. The top most molecules start to cure and harden...THEN...if you brush or roll back over that curing/hardening paint... YOU....WILL.... disturb and distort that " skin".... rolling or brushing over freshly laid paint is what CAUSES brush strokes or orange peel. like it or not..... lay down a coat.... and move on... if its been more than a minute DO NOT GO BACK AND TOUCH IT UP ... if it HAS been only a few seconds...myou might be able to add more paint but make sure that you fully " re-wet" the whole area with fresh wet paint which help all of it lay back down.
@jaya.0069
@jaya.0069 6 жыл бұрын
Good advise!
@LXRD-SUPREME-
@LXRD-SUPREME- 5 жыл бұрын
SOLDbyYOU YES!!! Hello quick question. I plan on doing this on Saturday long should I wait beetween coats ?
@theholmes7033
@theholmes7033 6 жыл бұрын
Grandma is helping also, to cool...
@MzGFunk
@MzGFunk 7 жыл бұрын
Just soak your roller in the paint then put plastic over top and seal around it tightly with tape. Good to go the next day. I think it'd be better to go one good pass with the roller and to do more coats than to keep going over one coat with the roller bc it starts to disrupt the paint more than cover it.
@ommitedommited154
@ommitedommited154 2 ай бұрын
Fill a pringles can with paint, hole in the lid for the metal rod, put it on before the roller. When you are done, dip it and stick in the can, or even better, fill the can with enough paint to keep it submerged.
@observergoldstein3709
@observergoldstein3709 Жыл бұрын
I know Rust-Oleum is cheaper then Auto factory paint but is that the reason for using Rust-Oleum because it's cheaper? Does chrysler white roll same as rust o leum?
@jodyjody6297
@jodyjody6297 7 жыл бұрын
So how did using roller to paint hood come out? Have you done another video on second phase of what this video tutorial is about. I never saw this before...I didn't think a house wall painting roller could be used for a vehicle....that is why I keep an open mind to things in the world....things are at a constant in respect to evolution and evolving practices of doing most things....perfect it n pitch it young man god speed...
@willyjilly9684
@willyjilly9684 8 жыл бұрын
good video, I'm doing my 79 soon. thanks for showing the rustoleum professional. I was worried because the cure time is different than the traditional "rust stops". (comes in the white can). I am probably going to do 50/50 on the mix, I don't mind re painting a few extra coats. good video, keep them coming kudos to all your friends helping... very cool bro!
@inzane3229
@inzane3229 3 жыл бұрын
question: i got an all black 98 chevy, is it possible just to buy a gallon of glossy black then just roll it without any other materials?
@zoesmith1755
@zoesmith1755 5 жыл бұрын
Tried this and the paint bubbled up like you said so thought I'd leave it see if it flattens itself but it dried bubbly?
@Jeka187
@Jeka187 9 жыл бұрын
Your math is right, but your measuring IS wrong. You said you need to put 4.8oz of thinner and 7.2oz of paint, but actually put around 5.8oz of thinner, because it was waay closer to 6 in the mixing cup... so you ended up mixing around 5.8 thinner and 6.2 paint, which kinda makes it almost 50:50 again. :D well done, plus you gained a subscriber
@Missi-Forensic-Astrology
@Missi-Forensic-Astrology Жыл бұрын
How many of those tans would u get for a Dodge caravan
@MHS_ART
@MHS_ART 6 жыл бұрын
You suggest this for a lanai aluminum? Not gonna put that thinner in it though
@allanbrogdon5317
@allanbrogdon5317 3 жыл бұрын
At American Airlines I started as a painter,we used polyurethane 2-part paint it looked pretty good.Some buffoons always applied a good squirt of accelerator in a paint tray,1-2 drops or it dries as you are painting.Little hairs grow off the paint.
@tri5garage544
@tri5garage544 9 жыл бұрын
i am a paint and body school grad and i have always wanted to try the roller paint job, don't get me wrong i love spraying paint but i believe there are many ways to get a nice paint job. i am planing to use tractor paint on my upcoming project '''an 81' toyota pickup that is going john deere yellow''' and i don't care if people don't like it, i think people will be impressed with how good it looks and how well it holds up outside.
@beac1099
@beac1099 6 жыл бұрын
adam white how'd it turn out? Planning on doing the same thing to my 79 Chevy k10
@s0n_0f_cali71
@s0n_0f_cali71 5 жыл бұрын
So why can't we use the paint straight out the can?????
@BradenCarlsonAutos
@BradenCarlsonAutos 5 жыл бұрын
It's just really thick. You'll get better smoothing when it's thinned.
@wez1096
@wez1096 7 жыл бұрын
Did you really paint over your washer jets?
@BradenCarlsonAutos
@BradenCarlsonAutos 7 жыл бұрын
youefintube Reservoir is deleted.
@speakbigtruth9383
@speakbigtruth9383 4 жыл бұрын
Didn’t even get to see the final product. Way to go genius.
@BradenCarlsonAutos
@BradenCarlsonAutos 4 жыл бұрын
Do it yourself and take a look
@JH-tk6ge
@JH-tk6ge 6 жыл бұрын
I love these videos lol. Everyone does it a little bit differently. Thanks
@JT-qf4it
@JT-qf4it 7 жыл бұрын
So it's been a while, how is the paint holding up?
@bcmiller2000
@bcmiller2000 3 жыл бұрын
This is low quality paint for cars, it's a simple alkyd with zero urethane and it's been thinned beyond the products capability to be a coating which will last longer 3 months.
@1blondied
@1blondied 4 жыл бұрын
That looks complete FUN
@tannermorales1446
@tannermorales1446 6 жыл бұрын
wow you have quick reflexes never seen anyone stir paint so fast like superman
@benetti250s
@benetti250s 9 жыл бұрын
If you make too much paint with mineral spirits for the job, can you store for the next coat? Or you must use?
@gospos1
@gospos1 9 жыл бұрын
+Lucas Leonardo Benetti ...I would say yes...perhaps just run it through a strainer first before second coat and seal the mixture well...
@benetti250s
@benetti250s 9 жыл бұрын
gospos1 thanks
@zanaga1901
@zanaga1901 4 жыл бұрын
Guy told me I ordered paint on eBay said use a 1/4 nap gonna get one at Lowe's on Saturday. Probably be better than using spray paint or a spray gun when all the paint fumes be in the air. I should of used a roller in the first place it seems better to me.
@gurjindersingh199
@gurjindersingh199 11 ай бұрын
Would 70%paint work better ?
@LXRD-SUPREME-
@LXRD-SUPREME- 5 жыл бұрын
Thanks great video I know it's old but how long did you wait between coats ? I plan on doing my hood this Saturday
@lass-inangeles7564
@lass-inangeles7564 3 жыл бұрын
Nice finish, amazing! 1. Did you use a mohair roller? 2. What is the wet sanding grit and do you use a machine or by hand? 3. What sort of paint did you use - a link would be helpful. Is this automotive paint?'
@RippSnortin
@RippSnortin 2 жыл бұрын
All the answers are in the video. DID you watch it?
@88str84
@88str84 5 жыл бұрын
Longevity report how is it holding up.
@tamberp
@tamberp 9 жыл бұрын
It's kinda funny how people seem to think the One and Only way to paint a car is by spraying (preferably in a mucho expensive paint booth); and that using rattle-cans, or a roller, or a brush just means you're going to get a crap result. Well, as you prove, it doesn't have to be that way; sure, it takes a bit more elbow-grease but you can still have a damn nice paint-job at the end of it. Guess that goes to show what "Everybody knows you can't..." is worth, eh?
@BradenCarlsonAutos
@BradenCarlsonAutos 9 жыл бұрын
+Jim P You're absolutely correct. Unfortunately, I ran out of elbow grease, so it's going to a shop...haha. But it can be done for sure! Thanks for the awesome comment!
@roseanneking8984
@roseanneking8984 5 жыл бұрын
Jim P I have a black 99 Chevy Cavalier and the paint and clearcoat have come off but I’ve thought about getting some exterior glossy black paint and just using a brush or roller and painting it. It couldn’t look any worse than it does now. What do you think about that?
@darryl163
@darryl163 8 жыл бұрын
hey man I have an old mustang its a beater that I drive the hell out of I want a matte finish white so I assume ID just scuff up the old paint with 800 grit and roll it on? no colorsanding or clear coat?
@BradenCarlsonAutos
@BradenCarlsonAutos 8 жыл бұрын
+Jerry Cantrell You can actually buy matte rustoleum in cans like this! It'd make the whole process a lot easier in not having to make it shine!
@darryl163
@darryl163 8 жыл бұрын
+Braden Carlson yep I grabbed a big can at my local home depot lol I'm in the process of fixing a few spots with bondo and fibreglass just not too sure if I should just roll it on or shoot it you think it would have to be thinned too? and what are your recommendations for thinningbwith mineral spirits much appreciated for your response
@BradenCarlsonAutos
@BradenCarlsonAutos 8 жыл бұрын
Jerry Cantrell If you can shoot it I'd do that, but if you're just looking for simplicity I'd say roll it on. Use the same ratio for mineral spirits I did in this video. It worked quite well
@olirosco5054
@olirosco5054 8 жыл бұрын
So is that the truth???? You stated you "sent to the shop because of lack of elbow grease"
@Mark-nu5vg
@Mark-nu5vg 7 жыл бұрын
Might help a little but if you're not worried about roller texture which I don't think you are you can buy sponge disposable roller 9" down to 4" you don't have to clean them they're cheaper than nylon and you don't get the little hairs from your roller in the paint.
@steveharvey2845
@steveharvey2845 6 жыл бұрын
Quick question ... I want to use regular wood varnish (poly) to do the clear coat on the hood of my jeep. Is there any reason you can think of that that wouldn't be a good idea?
@lass-inangeles7564
@lass-inangeles7564 3 жыл бұрын
Very bad idea! I use Varathane Oil Based Clear Interior Satin Polyurethane on furniture all the time. If I use it outdoors, it cannot handle UV rays and breaks down fast. Its a very tough interior finish, love it on wood furniture, but never outdoors. For outdoors wood use Spar Varnish (not Urethane. Varnish is more UV resistant). For your Jeep, consider using Durabak18, a bedliner paint, which is a form of Urethane. Don't use Epoxy paints like Upol Raptor paints which are Epoxy and crack with vibration. Durabank dries hard, but remains flexible for vibrations. It also comes in a textured (with crumb rubber) and Smooth and can be roller brushed on with mohair rollers. Uses Xylene as solvent and brush cleaner. Xylene is not available in CA but you can work around that. Durabak also makes a clear version but not the same as the slick gel coatings in auto industry. For your car best is to use auto paints and a small sprayer for gel coat.
@zanaga1901
@zanaga1901 3 жыл бұрын
Are you using a foam roller.
@thedailylife4335
@thedailylife4335 8 жыл бұрын
this is what I am going to be doing to my car in a couple weeks. I'm planning on it turning out better than how it looks right now lol
@alexcaudell8258
@alexcaudell8258 3 жыл бұрын
How did it go
@Iknowyoumadnow
@Iknowyoumadnow 2 жыл бұрын
@@alexcaudell8258 💀 10 months later no comment
@FlowVFM
@FlowVFM 3 жыл бұрын
The finish looks like raptor paint. A bit of sanding after and will look mat, ready for some clear
@bwompy1294
@bwompy1294 5 жыл бұрын
I wish I had a grandma like that.
@leonafeaver4770
@leonafeaver4770 Ай бұрын
I roller cars. Been doing it for years. After every coat I wetsand it with 800 grit wipe it off dry and apply another coat. After 4 or 5 coats I start with 1500 sanding sponge 2000 sanding sponge 2500 sanding sponge then higher grade papers or buff depending on level of shine. I don't have access to a paint booth or compressor
@Pete..
@Pete.. 9 ай бұрын
when done with the first coat, you can just wrap your roller up in a plastic shopping bag or a small trash bag and just keep it air tight. I like to roll it in the paint first before sticking in a bag that way it's nice and juicy and it stays usable right away when pulling it out of the bag just make sure you don't leave it in direct sunlight or enough to flow through because it can tack up and dry, but between it should be just fine wrapped up in the bag if you get a little bit wet with the paint you were using and then just store it in there while you wait to do the second coat. Shoot, I've had a roller wrapped up for a couple weeks and I still pulled it out and it was ready to roll so they last a while if they're not exposed to heat or air I mean, they have actual roller canisters that are like the size of Pringle Can that you stick your roller in while it's wet and it'll keep it ready to use
@ScratchyBaws
@ScratchyBaws 2 ай бұрын
No matter water or oil based paint just put them in a plastic shopping bag and tie the end to seal the bag and good to go next day or in a few days time.
@buzzdogrestrictedarea1289
@buzzdogrestrictedarea1289 7 жыл бұрын
Does it actually look ok with a roller on a car bonnet or car hood ?
@BradenCarlsonAutos
@BradenCarlsonAutos 7 жыл бұрын
CHANNEL BUZZDOG Yes, just make sure it's somewhere things won't land on it because once thinned it takes a few days to dry
@MrStupidpuppy
@MrStupidpuppy 7 жыл бұрын
I've seen allot of successful roller jobs... Best results and easy was to avoid "dry brushing" is to pour some paint directly on the panel and draw it out with a paint primed roller
@shopenz
@shopenz 4 ай бұрын
Finish product?
@terryschnereger8531
@terryschnereger8531 8 жыл бұрын
I've never seen anyone stir paint that fast, I hope you can beat off just as fast as that??
@BradenCarlsonAutos
@BradenCarlsonAutos 8 жыл бұрын
But of course
@losiboy454
@losiboy454 8 жыл бұрын
lol
@chancepantswindham7745
@chancepantswindham7745 8 жыл бұрын
Why do you hope he can? You want him to beat you off?!?!
@plucky2115
@plucky2115 8 жыл бұрын
+ChancePants Windham r u kiding look at the name...heheh
@cloroxbleach8363
@cloroxbleach8363 7 жыл бұрын
He can he uses me every day to get the nut stain out his pants and sheets I work good on nut stains fuck detergent if anyone sees tide tell him I want my fucking money
@guaplerocc1599
@guaplerocc1599 5 жыл бұрын
Orange peel finish?
@mikemike1073
@mikemike1073 8 жыл бұрын
I once had an orange cat and a can of rustoleum and when I woke up from a heavy night of drinking I now have a leopard, wife was like wtf
@robertplummer7928
@robertplummer7928 7 жыл бұрын
Mike Mike haha hahahahaaaa hahahaaaahahhohshit hahahaaaaha hahahaaaaa I need air hahahaha
@winteralexandriamiller
@winteralexandriamiller 5 жыл бұрын
Mike Mike 😂😂😂😂
@schnuurt
@schnuurt 9 жыл бұрын
When you use a foam roller first saturate it with paint, it prevents bubbles and orange skin, or use a short haired lacquer roller.
@olirosco5054
@olirosco5054 8 жыл бұрын
makes no sense...... Cannot be done using the 60/40 ratio
@REAYTH
@REAYTH 9 жыл бұрын
so 80-20 next time? Could you get close ups before sanding ?
@ericamalast9896
@ericamalast9896 2 жыл бұрын
That's great!!! Glad to know how to do this!!!
@bipedalhominid6815
@bipedalhominid6815 2 жыл бұрын
Why didn't you roll and tip??
@radionutio81ij79
@radionutio81ij79 6 жыл бұрын
Loved your video, I used dulux polyurethane orange on a datsun back in the 1970s that was rolled and it looked dam good I did have a problem with small bits of the roller stuck in the paint but from about 20 feet you thought it was a professional spray job. Just subbed regards from the uk.
@JMc.D
@JMc.D 6 жыл бұрын
If you put the roller in a sealed bag it will be fine to use as long as the air doesn’t fleet at it. Or ceran wrap it.
@jaym6466
@jaym6466 7 жыл бұрын
A DIY how to video that doesn't show a finished product. Glad I watched this video! I should do a video on how to paint your car with a roller/ how to paint your bathroom with a spray gun....
@RiverSLV
@RiverSLV 5 жыл бұрын
Jay M lol
@Iknowyoumadnow
@Iknowyoumadnow 2 жыл бұрын
LMFAO!!!
@pablocoello7930
@pablocoello7930 4 жыл бұрын
I'm doing this too need to save money lol good stuff my friend
@pablocoello7930
@pablocoello7930 4 жыл бұрын
@Lorelei Schwarzwald absolutely my friend
@bkw6329
@bkw6329 5 жыл бұрын
Looks like fun
@motorhead3153
@motorhead3153 7 жыл бұрын
what about clear coat, do you roller that too?
@mikesimms1247
@mikesimms1247 8 жыл бұрын
Throw that roller away and buy another ! A pack of roller brushes are not worth the dry paint trapped in the roller .
@VF1Skullangel
@VF1Skullangel 3 жыл бұрын
Did it to my Camaro and it wasn't bad. I can't wait to do it again on something else.
@geomasinda197
@geomasinda197 5 жыл бұрын
hello sir is that a automotive laquer paint?
@lass-inangeles7564
@lass-inangeles7564 3 жыл бұрын
LACQUER.
@cmw184
@cmw184 4 жыл бұрын
*bro love your honda bro SQUAAAAAD*
@joshuasmith8130
@joshuasmith8130 5 жыл бұрын
How do I get my paint stick to move that fast
@Manaviecreations
@Manaviecreations 8 жыл бұрын
You are awesome!!!! Thank you for sharing your project!!!
@tijuanabrassman
@tijuanabrassman 7 ай бұрын
I painted a 79 Cutlass with a roller and a few quarts of baby blue Rustoleum gloss enamel Came out perfect Still looking for a photo of it from the late 80’s😅
@MechInvent
@MechInvent 8 жыл бұрын
i laughed when you also had the plastidip problem. PO plastidipped the entire damn truck with what must have been 2 small coats. still trying to pick it all off before I paint it.
@bootsontheground1388
@bootsontheground1388 6 жыл бұрын
Next time instead of picking it off try using a heavy duty degreaser and a brush. Easier And faster. A buddy of mine used PD on his whole pickup. Looked nice but he decided after two years he wanted the original factory paint back so we washed and used degreaser on it and it went from PD black to the factory super white in a couple hours.
@trumpsarmy2499
@trumpsarmy2499 4 жыл бұрын
You got a link to everything you bought
@BradenCarlsonAutos
@BradenCarlsonAutos 4 жыл бұрын
No lol
@trumpsarmy2499
@trumpsarmy2499 4 жыл бұрын
Braden Carlson ty
@408modelshop
@408modelshop 8 жыл бұрын
damn! he had grandma and the neighbors kids she was baby sitting for the day too.
@plucky2115
@plucky2115 8 жыл бұрын
shoot, he's a bad man.
@josephbarba6176
@josephbarba6176 2 жыл бұрын
Bro got Grams helping lol 😆 nice
@jozseflaszlo7389
@jozseflaszlo7389 6 жыл бұрын
hi wot house hold paint did you use ?
@SlipMahoneyBowery
@SlipMahoneyBowery 10 сағат бұрын
If after you paint you use a torch to heat the paint it will get rid of the orange peel. Smooth as a baby’s bottom.
@gibbethoskins8621
@gibbethoskins8621 8 жыл бұрын
The final result looked great... oh hang on wait you didn't show that, thanks
@1369Lizard
@1369Lizard 5 жыл бұрын
thanks for the video. Have you tried tipping the paint with a good brush after rolling?
@diastoleny
@diastoleny 5 жыл бұрын
I tried tipping a 16' skiff. Top of line marine paint. Even got the right brush, watched every video. Seems to be an art because I really had everything right and couldn't pull of the tipping. Some KZbinrs are mighty skilled. Not me!
@fatihkose8448
@fatihkose8448 Жыл бұрын
İs it car paint ör metal paint bro?
@cristianalvarez94
@cristianalvarez94 7 жыл бұрын
grandma goals foreal
Roll On Car Paint Job - Part 1 (Porsche + Tractor Paint)
11:41
Boost Brothers Garage
Рет қаралды 113 М.
Paint Your Car for $20 Bucks !!!!
17:00
Bushradical
Рет қаралды 83 М.
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Painting your Car with Spray Paint!
28:38
Paint Society
Рет қаралды 3,2 МЛН
LANDROVER SERIES 3 COACH PAINT HACK WITH 4 INCH SYNTHETIC ROLLER.
7:10
Eddie Williams Fast cars jetskis old landrovers !
Рет қаралды 31 М.
How to paint your car with Rustoleum.  The right way.
6:50
jtech87
Рет қаралды 1,3 МЛН
CRAZY Rustoleum Results - Painting 1967 Mercury Comet
22:38
Rusted Rides
Рет қаралды 130 М.
$28 CHEAPEST RATTLE CAN PAINT JOB! IT ONLY TOOK 4 CANS!!
17:46
Moore Motorsports Garage
Рет қаралды 1,3 МЛН
How to repair damaged clear coat AT HOME! with SPRAY CANS!
13:36
⚙️Homie Hektor⚙️
Рет қаралды 6 МЛН