How To Panel Line Scribing | Tutorial Tuesday

[@silverhand.johnny]

Truth be told, your video was the one who awoken my sleeping love for gundams. now that I bought my first gunpla I'm really thankful that you created this tutorials for a lot of beginners like me. thank you so much!

[@saxonian6634]

I was today years old when I learned that after years of holding scale models in a padded vice and performing weird yoga poses with a metal rule and a scribing tool, that this method was even a thing.......I don't build Gunpla, I ended up here via a winding KZbin rabbit hole, but I'm delighted I found this. As someone in a different branch of the wider modelling hobby, thank you!

[@maitronghieu7361]

Welcome welcome

[@Char_Aznable_Red]

ok ESL

[@adhityaza8693]

i was looking for scribing tutor for today, more than 5 video still can't satisfy me, then studiog upload new video about scribing tutor and it answer my question. what a coincidence

[@crossbones8956]

Same!!

[@cybersteampunk]

Nice! This tutorial is what I need. I just started scribing this morning and only used a hobby knife and masking tape. I prayed to the scribing gods too lol. Again, concise and full of information. Best tip, "don't be afraid to start".

[@chuckymaynard96]

So, another thing you can do to fix damage, mistakes or blemishes, is snip off small bits of the spru in the color of the part and mix them in a small amount of extra thin liquid cement. If you're removing seem lines between parts, you want it kinda thin, but if you're filling gaps or fixing scribe mistakes you're going to want it to be more plastic than glue. It creates a kind of putty in the exact color of the kit. Just apply some to the problem area, let it dry, and sand it flush. And boom, good as new.

[@Schjoenz]

If the groove is too deep, You can also use tamiya cement to melt down some frames of the same colors (that's why I don't throw them away) and use it as a putty. That way, you don't need to paint the parts just to hide the crazy mistakes you've made.

[@Manlima]

Thank you so much for this video tutorial. Two things to consider: 1. We love the flow of information. Super smoothly edited. 2. Not only you give instructions about how to do it but also you give extra tips and how to fix common mistakes ...and those points make this tutorial a very good one. Thanks! Also we want to tell that we have started crafting gunpla a few months ago and we are on the point of buying a chisel and we found the one that you show for newbies on this videos and that has giving us the conficende to buy it and starting to panel-line our next build. Thank you so much!

[@NzStudio00]

I've never been so confident after watching this.

[@cantarokundayo]

Was literally waiting for this man !!! Awesome tutorial, thanks a ton man !! Here we go PG Strike gundaaaaamm !!

[@enderthemaster]

So how was the pg strike

[@ilink06]

Great video. Tips from watching the video and you didn't mention. While scribing, have a pivot point. The hand that's doing the scribing, the last or last 2 finger can pivot or rest on the other hand holding the parts, in this way, the movement will be greatly reduce and mistakes will be lesser. (As shown in your video)

[@RaNmA5886]

Evertime i search for a helpfull Gunpla Video i found one of yours. Thanks a Lot for your time to Help other Gunpla builders.

[@jacobdavis2785]

Dude, this was a great guide. Super informative and useful.

[@moisteroyster7760]

I like how its sponsored by newtype. They are sold out of all these products.

[@Shin_Lona]

It was a good site before they started sponsoring people. Once everyone found out about it... well, they ended up like all the other ones.

[@moosemonger6967]

@@Shin_Lona How is it bad for them to have more revenue coming in? Would that not mean they have more money to put into more products for us to buy?

[@Shin_Lona]

@@moosemonger6967 If that was the case, they wouldn't be out of the product, would they? I might buy some random stuff, but not if they don't have the main item I'm looking for. No purchase. So it acts as a revenue cap. There is such a thing as too much business. If KFC runs outta chicken... people are gonna be pissed.

[@moosemonger6967]

@@Shin_Lona According to the company they are out of product due to import being extremely hard to come by due to the pandemic.

[@Shin_Lona]

@@moosemonger6967 Of course. Everyone is quarantined building Gunpla and trying to order stuff.

[@johngonzales4342]

I love your tutorial videos. They are very informative. I am building my first Gunpla and before my tools arrive on the mail, I'm gonna make sure that I learn enough information.

[@louiecabatuan8105]

A real pro in action. Best scribing video out there. Auto Subscribe!

[@StudioGundam]

Thank you so much! More to come 😃

[@nikogummy]

"Give that surface a good old scrub~ Heh yeah boi~" Memes aside, great tutorial. Definitely simple enough to follow and instructions seem crystal clear 👌🏻

[@barbatossifiruz]

We love you , you really help us to never give up

[@thunderboltsectorstudios6906]

Easily the best scribing tutorial on KZbin. Great job man

[@KimXzilla]

Actually this is one of the best tutorial ive seen. Pls add some tutorial panel line with different equipment (ink, pen etc) shading etc, sanding, equipments suggestionnfor those who are starting like ur scribber from the expensive and lowbudget. Sorry for the request but ur so good ao maybe u can help not only me but those who want to enter gunpla. for those who want to start i reccommend this page thanks for the knowledge and technique. Ps sorry for the aggresive comment if i am..just got amazed how good the tutorial ghahhaha

[@bongbernardo6402]

Sir thank you very much. I learned from your tutorial video, although I was looking for a clearer explanation, I was confused, but after watching your video. Wow, I understood too much, and it's clear, even though I don't have equipment, and a gundam, that's my dream. thank you so much

[@fernandozavaletabustos205]

Thank for the clear explanation and top-notch editing, you have gained a new subscriber!

[@PlamoTherapist]

I should have rewatched this before scribing. I think one thing that should be emphasized is how LIGHT those first few passes are. AND TRUST YOUR TAPE!

[@user-lynKx]

I always envy the tutorial and review people who do this with a camera straight, smack in the middle of the view.

[@cowdogg3085]

Thanks for the tips!! Now I don't think I'll have a problem trying to scribe my part. 👍👍keep up the great work an i am looking forward to your next video.

[@nobbym1531]

Great tutorial on scribing and correcting mistakes. Thank you.

[@ocean_jams]

This was so trippy I was building and heard one of my tunes in the background ! Thanks for using my song :)

[@RayFChung]

Good stuff thanks for making this. The bit about the joining ends of the lines was actually new info I havent heard before so nice on that.

[@tk_mitternacht963]

Love your videos mate, I'm pretty new to this hobby and need to learn a lot, and I mean A LOT cuz I'm busy with my work and won't be having much time to spend with my kits (I only built like 5 kits so far) but I want to make every kit that I build next look dashing, your vids are super helpful 0w0)

[@Prestidigitalic]

Thanks for the tips! Might try scribing a HG kit soon. Looking forward for next tuesday!

[@avachys9271]

I did not know what to do before i saw this tutorial, you are awesome!

[@niftykeebs9507]

ive been practicing on some HG gunpla but this video made me so much more confident! thank you for the tips!

[@SanjayKumar-en7tm]

Great video! This really helped me Justin!

[@ngzijin4215]

Thank you so much for this helpful video man! It's really detailed and by far the most well explained scribing video I've seen!

[@StudioGundam]

Awww thanks man I try my best to be as detailed as I can be! 😊

[@ngzijin4215]

@@StudioGundam 不客气 哈哈哈

[@bruced648]

this is great for kit-bashing my war gaming mini's and models!

[@shaymightbebub]

im a little late but im very happy this was made because its really going to help me with my business im starting

[@mintpalmer]

4 months?! Dang dude, you pick up things quickly.

[@joshb8976]

Yeah I don’t buy it.

[@Dawnwesker6896]

usually i create it from mix of cutting leftover runner from parts (usually belong and mr.hobby or tamiya cement in glass bottle or metal bowl...then apply it on those parts....this way also can be a solution for leftover runner and if you don't wanna repaint it just fixing some damage, like wrong cutting, nub mark holes, etc...

[@Shin_Lona]

PRO-TIP! This is great advice, builders. Don't sleep on this one. The best filler is the SAME PLASTIC AS THE PART.

[@justindavisphotography]

Nice tutorial. Hope to try my hand at it for the first time soon. I was inspired by the results you got with the janky home made scrubber from a pin when yours broke. I’ll give that a try too!

[@LeoNelBuilds]

Fantastic video! I was just today messing around with scribing... how timely! Keep up the awesome work, Justin!

[@StudioGundam]

Thanks man! Hope those tips can be put into use immediately :)

[@kimsumadic7505]

2nd tip is the best tip. Just take a rest if you're tired.

[@jerrychua513]

Thanks bro for the advise. Will further improvise my scribing techniques.

[@djroquel]

I always look forward to your tutorials very clear and straight to the point. I can only say for myself. Thank you as always keep up the awesome work

[@pwk1983]

good tutorial, I will normally put them into ultrasonic cleaner and it will get rid of all the sanding particles stuck in between the panel line.

[@Matthew_Dubroq]

Tutorial Tuesday coming in clutch....

[@fallen8282]

the one thing I am still super confused about is how ya come up with all dem panel lines as they pretty much always look so FREAKING PERFECT XO

[@RadicalEagle]

The best way to do it is to study them. StudioG himself will look at other people’s work to get ideas. The more you think about panel lines in relation to the geometry of the panel/part (lines are usually parallel and intersect at specific angles), and the more you practice, the easier it will be to figure out where you want to put your lines. It takes a lot of practice.

[@StudioAttackOnPlamo]

this is awesome i love how he explain the step by step process in detail!!!

[@ashpitcher3]

Thanks! Great info, great presentation.

[@monsterforge884]

Excellent tips! Thank you for sharing your knowledge with us!

[@jjrrobert526]

Awesome tutorial, i've learn something today. Thanks Justin.

[@elvenditty3281]

Thank you! loved the tuto. I'm super excited to put these into practice

[@n10srandomcontent81]

Thank you for the tutorials, You thought me alot and it really helps me get better in building gunplas

[@chandrazeng]

Keep up the good works! Looking forward for your next tutorial video

[@muning1227]

Been waiting for this 👍👍👍

[@frizyt7093]

Thanks for the tutorial 👏

[@shyzarrraja7964]

Amazing tute! Has given me the confidence to try it out A couple of qs; So you don't need to hold the blade parallel to the line? and, are there any tips or specific techniques for scribing on heavily curved surfaces? Thanks!

[@paonico7850]

Just got my scriber! Excited to do some practice

[@filip8985]

omg like a year or so ago there were like no tutorials on this stuff, so when i had to figure it out on my own to make my PG rx-78-2 into the ver3.0 one, made a lot of mistakes. This video is great btw, but if you want some quick tips, DONT RUSH, dont go "oh its like a little line ill free hand it" because it will go at a slight angle and look terrible, also scribe very lightly, otherwise even if you have tape it might be a little wonky and if you do it hard the first time you cant correct it. id highly recommend the tamiya scriber 2, its wonderful, maybe if you want some finer lines then the ones in this video look better for that

[@gunplaglutton6099]

Very well explained and demonstrated. Thanks for this video! Keep grinding!

[@ernestjhananesuto5570]

What a beginner friendly tutorial ang tips.

[@OfficialWes]

You really inspire me ! 🙌

[@Nasamukamuk]

Really good tutorial good job keep going 👍👍

[@irish_gunpla4064]

These videos are really helping the community 👍 I'm going to use these tips , looks like you are going to hit 40k soon and you only finished the 30k competition 😂 all well deserved 👏👏👏

[@nimbulkucing680]

thankyou for the tutorial it really help me the beginner~~

[@larundel]

These videos are great, a big help and love the parts list you always have, thanks, please keep it up....:)

[@notjustrafi404]

WOW BRO YOUR TUTORIAL SO GOOD THANKS!!!!

[@ceadeus1178]

Thank you so much for all the tips

[@StudioGundam]

No problem! This is what I have learned so far and have no problem at all sharing them :)

[@doccifer2791]

I thought panel lining was dumb and useless but after watching the 3 minutes mark GAWD DAYUM

[@dim1723]

Thanks for the great tutorial. Wishing I had time but just a fun hobby and no time left after adulting. Besides after I give my gundams away for kids to play with. Cause what kids don't like a great action figure to play with. Also it will get more interested in their future and learning great skills.

[@shanequigley7369]

There are actual action figures that can be played with ( pretty roughly by the kiddos ) can't think of exactly what they are called I'll try to look and edit my comment with them .edit It looks like they are Gundam universe action figures

[@businesscat8320]

why the hell my notif didn't work on studio G? i'm going to sue youtube for this lol. Great tutorial again Studio G hope to see more of your Tutorial Tuesday.

[@SamaelMorningstar]

Thanks man. Awesome work.

[@johntorres5442]

Thanks for the tutorials it's very usefull.👍🏻

[@GabrielMoreira-lp8jj]

Yoo, mate nice video, i learn a lot today, thanks and keep the good job! Gabb here

[@NoobCustom]

I learned a lot since i am a beginner.. but it got me to laugh when justine said "time to go to the side of the bed and pray to the god of scribing"

[@ndank7484]

Thanks Bro, Your Tutor so meanfull for newbie like Me

[@blitzmustang1588]

If you are an absolute beginner, get putty or superglue. Since you can and will make lots of mistakes, you can fix those mistakes. Incidentally, you can also intentionally make mistakes so you can make a better line, after that you can fix your mistakes by putty or a lil bit of superglue

[@themeatpopsicle]

Excellent video!! I do wonder how tall your hair is going to be after the pandemic, though

[@DeDoGunpla]

nice tutorial man.. might use my hobby knifes broken tip and use it for iscribing instead.. 🤨😏

[@StudioGundam]

That's actually workable but you won't be able to do any corners

[@DeDoGunpla]

@@StudioGundam poor boi's can improvise.. 😁

[@juliuskazunaga8916]

It's here BOIS!!!

[@mohdzainulrinzakaria2947]

Great tutorial G!!

[@yangpan5542]

Thanks for the great tutorial, would you like to show how to erase the lines between the particles when you attach them together?

[@FloydBarker]

Thanks bro! Great video

[@ranid.p.6909]

9:58 i recently discovered the same method in using that basic type tamiya putty

[@oppouddin2461]

Nice guide bro, bro after this can you make some guide for painting?

[@neolabcustoms]

Things I've figured out today (my first day scribing): ABS plastic is way harder than styrene. Model kits are so easy and clean, things like Transformers figures that are shot in ABS plastic are harder, with much more resistance and the surface quality isn't as smooth. Also, maybe it is just the MIG tape I got (the only one my hobby shop had), but it WILL NOT stick to any type of curve...

[@DamienFleur]

Nice tuto, thanks. What about melted runner plastic bits in tamiya cement for big mistakes? (no paint customization)

[@ferdiepalacios2622]

hi..what points (sizes) would you recommend for panel linning a 1/144 scale models . Tia

[@gundamfiloz586]

nice, u done it again

[@Dracobyte]

Amazing video!

[@seejaygo]

Where can I buy the scriber that you're using? Not the one that you've linked and has the red handle, but the exact one you're using?

[@gundamguardian5314]

Justin I would like to cangratulate you on creating a good scripted and informative tutorial/guide. Maybe I will start it now :D

[@GunplaTalkShow]

DO IT!!!!

[@jmack0013]

Good stuff. Thank you

[@Nearz99]

0:52 what is your hobby knife??looks cool

[@edwinleong9329]

How do u make sure the panel line is identical both side? Eg: both legs, both hands. Or you just eyeball it?

[@9S0dX]

Plan them first, using edges and existing lines and measure the scribbing from there

[@placross]

either make a template from pla plate or use 2 masking tape to mirror the lines

[@gmoney1664]

Can I check, why do you polish with the 3000 grit, what does polishing do, other than make it shiny?

[@plantul666]

@studioG where did you get that black and silver tip Chisel Scribe ?

[@wilridersarawak]

Thanks for the lesson

[@bubBleeze_666]

Good work 👍 bro

[@JerryTNF]

Great tutorial

[@jefryrandallsinulingga375]

but sometimes I still confuse to make some nice line design. Can you tech us the way how to make a great design of scribing line gunpla?

[@StudioGundam]

Ah I don't actually have great designs yet but what I do is I always refer to pictures on google or Instagram for awesome scribing designs :)

[@placross]

in general the panel lines should be 90 degrees or more if it has a pointy bit just add another line on the tip so it's not pointy anymore.

[@MonroesArtStudio]

my issue is alignment. I just started scribing but the aligning part always gets me. I think it looks good and balance then I start to etch...newp 🤣