How to paste your own sanding belt, easily, quickly

I can't find pre-made sanding belts for my bench top sander with fine grits in so I started to make some myself from sandpaper roll!
Don't forget to click on the Bell icon near the Subscription button so you always get notified when a new video comes up!
If you have any questions please leave them on the comments below and if you like, give a Thumbs Up and Subscribe!

[@ItAintMeBabe99]

Nice neat workshop !

[@yennguyendiy5130]

@itaintmebabe99. Thank for watching!

[@mariodiaz4694]

CA glue and yes you can use it on removing rust on steel

[@yennguyendiy5130]

Mario Diaz. I don't know the ingredients in glue, but I usually use it for my sanding belt. Thank you for watching! Hope you have a wonderful day.

[@dkingsmanleatherspa1662]

What length in measurements sbould a zx 202M shoe repair machine should have..it's about the size you created

[@RT-Ford]

I purchased a box of 1 x 42 inch sanding belts at an auction for a couple of dollars. Apparently, they were pretty old because every one of them began breaking at the seam when I tried to use them. I tried every glue I had attempting to repair them. Nothing worked. Finally, I stuck a 1 x 6 inch strip of duct tape across the seam on the back of the belt, laid it on a marble slab that I have on my work bench and used a roller to make sure the seal was good. It worked like a charm.

[@yennguyendiy5130]

@RT-Ford. I often use this glue, very good, fast, economical. Glad you watched!👍

[@belbela4478]

good jobe, I have a question: this genre of sanbaper (brown)(aluminium oxide) comunly used for wood, Is it good with metal Or no ???? according to my knowledge black sandpaper (silicon carbide) is used for metal.THANK YOU IN ADVANCE

[@yennguyendiy5130]

Bel BELA . Thank you ! I have tried many types of glue, and found out that this glue works best. I'm sorry English is not my primary language so sometimes it's hard to explain what I wanna say.

[@TorteTS]

Soft steel is no problem

[@yuanweizheng3043]

hi,which glue do you used?

[@yennguyendiy5130]

Yuanwei Zheng. Thanks for watching! 502 glue

[@donaldvikashsingh1350]

Hi which glue do you use wood glue or formaiker glue or super glue

[@yennguyendiy5130]

@@donaldvikashsingh1350 .Thanks for watching ! 502 Super glue.

[@nonyourbuz5805]

...I am curious WHY Asian People squat when working instead of sit/stand ?...Doesn't this hurt the legs?

[@yennguyendiy5130]

NonYourBuz.Thank you for your interest ! My work place is very narrow, can not stand upright, can touch my head ,glad you watched my video!

[@mariodiaz4694]

Depends on Asian country also what works for them might not work for you 🤣

[@vickybn6002]

That's the natural resting position of homosapiens, lazy bums discovered tables.

[@tacd8034]

what type of glue your using?

[@yennguyendiy5130]

TACD 803. thank you ! 502 SUPER GLUE

[@tacd8034]

@@yennguyendiy5130 thanks bro

[@yennguyendiy5130]

@Barry Manilowa. Thank you ! I am happy to receive your feedbacks, advices. Hope you have a wonderful day.

[@DIY-cu5jp]

請問那是什麼膠水

[@yennguyendiy5130]

熱情. 感謝！ 502膠水😂

[@DIY-cu5jp]

@@yennguyendiy5130 感謝您

[@azizaziz-wc7qs]

Préparation de la colle trs2002

[@yennguyendiy5130]

aziz aziz. Hi! Thank you for watching.

[@user-zr3io2ft1x]

Longer than needed vid

[@deepanshu7949]

Name glue give elastic in sand belt after dry

[@yennguyendiy5130]

Bad Gamer .Thank you ! Adhesive 502. This glue I have used many times, very good heat resistance

[@OpusDeFocus]

Dude, your not supposed to do both ends. Had you only removed abrasives from one end you wouldn't be left with a bare spot.

[@yennguyendiy5130]

OpusDeFocus. I am happy to receive your feedbacks, advices.Hope you have a wonderful day.

[@toddbloss]

neither quick, nor easy

[@yennguyendiy5130]

Todd Bloss. Thanks for watching