pc6 Power commander 6 differences from pcv Raptor 700

Cuervo ATV Raptor 700 specialists
951-743-6328
[e-mail]
/ cuervoatv
www.ebay.com/u...

[@tutorialhelpdesk]

It is too bad that they made the PC6 like this. The Power Commander line gets a bad wrap without adding more reasons to have problems with it.

[@zanettialvaro]

So.. If you could choose you would get the 5 instead of the 6?

[@zanettialvaro]

I'll answer myself after some research. Yes, definitely the pc5 is a better unit with more capabilities (and less fake restrictions) than the "newer" pc6.

[@TheFunesk]

Thanks a lot It's a lot of great information

[@Seamedrumble125]

Can this be used for a 770 kit

[@jake694537]

Is there a benefit to installing a PC6 on a bone stock quad with the base map of all zeros? I plan to do other upgrades in the future (all in due time and money). I got one when they were on sale and don't know if I should install it on the quad or wait until it's needed.

[@maximusmax4557]

You may as well wait, but if you really wanted to, you could install it with an "all zeros" map. Though, I bet you'd see some benefits from using a "canned" map setup on a stock quad, but ultimately, you'll want a custom tune, no matter what. 😉

[@ThePyrofreak94]

How can i get the dealer mode? I need to adjust the ignition point. In user mode there isnt the option. Greetings

[@christiaanhorton5097]

I just installed the following and need a PC6 map if you sell one: 1. Empire dual shortys with heat shield over speed sensor plug because that is what Empire said to do - though some plug it for 2021+ models and live with check engine light on… 2. Fuel Customs intake + box 3. AIS delete Any comments and if you sell a map for my set up, how do I get it? Thanks!!

[@alejandroarauzg]

Mr. Cuervo so now if you want to tune with PC6 need to contact a oficial distributor and provide your mods for make the tune?.

[@PlugNico]

Is there a way to get the dealer software without being a dealer?

[@zanettialvaro]

I'm interested in this too

[@maximusmax4557]

Highly doubtful.

[@yoursofullofitha7262]

Legit shops can get Pro tuning permissions

[@lecteur4195]

? What benefits would i get on a 2017 Yamaha fz10 with the PC6? PLEASE AND THANK YOU

[@mtncrvr1]

Really borderline false advertising on Dynojet’s part. Nothing in the product docs on their site showed this new “feature”. Also they don’t have many PC6 maps compared to their current PC5 map collections. Thanks for the vid though helps explain it well. May hit you up a bit later for a map / map review.

[@NateHarrisCreations]

I bought a 2023 raptor 700r se what all would i need to do aftermarket exhaust?

[@rudycornelius5119]

How do you calibrate using the pc6?

[@raymond3088]

Does autotune work on pc5 and 6?

[@mtncrvr1]

I have the PC5 version AT-200 and it works fine with PC6

[@DigitalVenturesDV]

Is there a way to see how much fuel % is the quad getting while it’s on ?

[@chayannecastellano7221]

Is it true you can add 2 step on a pc6 for a 2022 raptor

[@eager400]

So the only major difference is the pc6 has less features for the consumer side? What exactly makes them California compliant?

[@MrCuervoRacing]

Nothing yet.

[@Striderexe]

Can i use the pc6 2015 version on my 2013 raptor 700? or are they entirely different

[@FrancoAguirre-k5d]

can we change the firmware to turn the pc6 into a pcv ?

[@yoursofullofitha7262]

No

[@tutorialhelpdesk]

Are PCV maps importable into the PC6?

[@mtncrvr1]

No - pc3/5 maps don’t work with PC6

[@Stoneman1270]

I'm getting my PC6 installed. Do I need to tune it myself or can I just plug and play?

[@MrCuervoRacing]

Every pc6 needs mapping or it does nothing

[@Abdulaziz-oo8zg]

@@MrCuervoRacing Same with the PC5? Or only PC5 is plug and play?

[@maximusmax4557]

You can find "canned" maps that might be close, but ultimately, you want your PCV or PC6 custom tuned to your machine/setup.

[@mrdreamers08]

were can i get a map?

[@MrCuervoRacing]

Email me all the info to [e-mail] cost is 75

[@251trill]

Changing the speed limit in configurate can change the speed of the bike?

[@Thatmfz650]

What luck did you have?

[@harunadmuz2020]

Hello I installed Power Commander 6 in r3 2020 and daynojet told me that they still don't have maps for a full exhaust and an open air filter. They told me that I need to go to the dealer. I bought from the USA.. and I'm from Israel. So you're telling me you can make me a map for this motorcycle?

[@JamieS1992]

you need to find someone in israel who has a dyno to tune it for you, you dont want some map off the net

[@yoursofullofitha7262]

You can contact any tuning center that has Pro permission.. if they have tuned a vehicle like yours with the same mods and have the tune in terrorist database..they can sell or send you the tune via email

[@shrugger1]

Everything I've owned has been carbed till now (700R), so I don't understand the ins and outs of these. Are you saying I can buy a mapped one from you if I provide the mods I make?

[@MrCuervoRacing]

Yes. If the mod combination is something we have built or dyno tuned locally

[@shrugger1]

@@MrCuervoRacing 👍

[@graysquirreltreeservice7299]

Should I switch to regular atv / wet clutch 10w40 oil for new engine break in ? I read the synthetic is too slippery to seat rings

[@MrCuervoRacing]

Can switch as soon as you like

[@graysquirreltreeservice7299]

@@MrCuervoRacing ty for quick response 😁👍🏻love your videos 🙌

[@maximusmax4557]

"Too slippery." LOL

[@jimwillis2698]

Can I get a premapped from you on my 700r?

[@MrCuervoRacing]

Yes , call 951-743-6328 or email me @ [e-mail]

[@jimwillis2698]

Thank you for the map,new stage 3 cam works great.

[@brianx04]

This is sad they made the product worse.

[@yoursofullofitha7262]

You can thank the government and EPA..