How To Permanently Fix Baseboards Cracks!

Рет қаралды 105,539

4 ай бұрын

Dripless Gun used in the video: amzlink.to/az0z70SslRUWf
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links and purchase something, I’ll receive a small commission.
Thanks for watching and helping support the channel:)
Special thanks to my buddy Aaron for his work on this video!

Пікірлер: 91

@JamesKingfrum 4 ай бұрын

Not now babe, TFC just uploaded

@TheFunnyCarpenter 4 ай бұрын

That's funny:)

@jimanderson4495 4 ай бұрын

Pushin 400k Funny Man!!! How about a shop tour?

@ergosum5260 4 ай бұрын

Stop admiring his caulk

@SLaird22 4 ай бұрын

With your tips I've gone from being terrible with the caulk to being a monster of caulk, you da man

@gene1647 4 ай бұрын

Thank you for all your help. I just contributed as a small thank you. Much appreciated.

@blacktalonbased 4 ай бұрын

Wet, moist, caulk in a crack. My favorite kind of KZbin video.

@mrboics 4 ай бұрын

Lots of sexual innuendo going on here!

@seeingblind2 4 ай бұрын

No jobs done...without the caulk

@TheFunnyCarpenter 4 ай бұрын

without the caulk there can be no life....

@Spacecadet0730 Ай бұрын

Thank you for the informative video. I'd like to suggest one please on tackling the seams in crown molding that come apart after a a little bit. Thank you!

@zhouliyuan12 4 ай бұрын

Loved the video! Exactly what I thought to fixed gaps in my 2 year old house and thanks for recommending the brand!

@MelLovesIceland Ай бұрын

I can’t watch any of your caulking videos anymore without laughing. In fact as I was doing my caulk job yesterday I was coming up with my own innuendos. I literally couldn’t stop and kept myself laughing the whole day. Thanks for your tip and can’t wait for the next one (see I told you I can’t stop)!!!🤣🤣🤣

@advancetotabletop5328 3 ай бұрын

Thanks for the caulking mini-review!

@jeevespreston 4 ай бұрын

Have learned a lot from you, thanks for your vids!!!

@monkeybarmonkeyman 4 ай бұрын

Identifying those brands is a big help. Now I watched a couple of videos about installing baseboards a couple years back... and I would almost promise you they suggested cutting your end cuts a couple degrees beyond 45 if you have a right angle corner. Didn't you do a video on putting down new baseboards?

@TheFunnyCarpenter 4 ай бұрын

I think so, I'm going to do another one that's more step by step in a few months

@weekendwarrior3420 4 ай бұрын

Caulking is a glue - I unscrewed a wall cabinet in my kitchen and it was hanging on caulk!

@kaymack5304 4 ай бұрын

I love your videos! Clear, to the point, great camera angles. What more could you ask for!?

@1966johnnywayne 4 ай бұрын

Looks good, thanks.

@bratworx 3 ай бұрын

Great advice as usual! Where do you source your caulking products, specifically the Dynafex 230?

@josephkerley363 4 ай бұрын

Good to know! Thanks!

@phillyfathead 4 ай бұрын

Great video as always, you sidestep a few innuendos😂🤣

@TheFunnyCarpenter 4 ай бұрын

I try

@bzoidberg 4 ай бұрын

I'ma new DIYer, these videos are very helpful!

@TheFunnyCarpenter 4 ай бұрын

Awesome! Thank you!

@Pete.Ty1 4 ай бұрын

👍👍👍Great tip. Thank you

@TheFunnyCarpenter 4 ай бұрын

Thanks buddy

@terrybeaud9348 4 ай бұрын

Sick !!! :) ... a little tip, once you've cut a small hole, use those curve wire picture hooks to poke hole in calking tube.

@TheFunnyCarpenter 4 ай бұрын

Any of the Latex based caulking that I've used doesn't have a seal. But that would be an excellent tip for silicone or adhesives!

@Yolleem 7 сағат бұрын

Crocodile wipes is a life saver. Use that instead of wet rags. Multiple uses.

@sondraharris53 Ай бұрын

Hi! What would you suggest to use for board and batten gaps? Caulk was used for where the board meets the wall, but my problem is where board meets board. I can’t figure out what to use in those seams. Caulk is shrinking and cracking. It’s making me crazy! 😅 Thank you in advance!!

@saltydroog854 4 ай бұрын

This is why inside corners should be coped. Just thought I would start a trim war in your comments . LMAO

@TheFunnyCarpenter 4 ай бұрын

100% agree, how did I not mention this:(

@saltydroog854 4 ай бұрын

@@TheFunnyCarpenter You are probably better off not mentioning it. Because the industry is filled with cry babies that don't want to hear about how the way they do it is wrong. So they will shout, piss, bitch and moan about how their miters nEvEr oPeN, when in realty what they mean is they've never seen one of their miters 3 years later. And really, if everyone knew how to do it right, you wouldn't have a video to make telling them how to fix their work. #TrimWar2024

@thezfunk 4 ай бұрын

I learned how to cope with an angle grinder and a flappy sanding disk. Works well and is fast.

@DrBeckyEm Ай бұрын

Can you cover hanging shelves and 3:01 organizers for aluminum siding in garage.

@Braunfolk 4 ай бұрын

Could you do a video on your favorite tradesman work gear brands for pants, shoes, etc that are comfortable and durable? Thanks for all the good videos

@TheFunnyCarpenter 4 ай бұрын

I like grey Levi 541's. The have a bit of stretch and are pretty heavy duty. I was always a Finish Carpenter or Cabinet Installer, so for shoes I always wore sneakers. If you're looking for a great shoe for everyday life my favourite is the Saucony Peregrine.

@ronnie3887 3 ай бұрын

That’s the best caulking for trim out there.

@gene1647 4 ай бұрын

Thanks!

@morethanenoughwoodworks7654 4 ай бұрын

You wanna shove the caulk in the crack as far as you can. Just moisten your finger and use it to slide the caulk in to the crack. And of course as mentioned, when finished used a wet soapy rag and wipe the caulk until clean.

@TheEclecticHandyman 4 ай бұрын

Great tip on that baseboard corner. You sound a little like Seth Rogan.

@maggiebrattoli383 3 ай бұрын

What is the best type of paint for baseboard and moldings around the door jams? Please and thank you. 😊

@davidkastin4240 3 ай бұрын

Interior paint for walls semi gloss is what I use. Dirt cleans off easily.

@northernlights2121 4 ай бұрын

What do you think of Extreme Stretch? Is it rebranded Dynaflex 230?

@TheFunnyCarpenter 4 ай бұрын

I haven't tried it. I'll have a look next time I'm at a hardware store and see if they have it.

@daviddesilva4971 4 ай бұрын

Caulk on!

@bobobbbenben123 4 ай бұрын

LOVE YOU

@sjoerdtollenaar4089 4 ай бұрын

Any tips on cracks in plaster work, that are reappering over and over again?

@TheFunnyCarpenter 4 ай бұрын

I'm not super familiar with plaster, but perhaps you try some dynaflex or big stretch in the cracks.

@sjoerdtollenaar4089 4 ай бұрын

@@TheFunnyCarpenter tnx for the reply, that might be a good idea. I havent found dynaflex over here in the Netherlands. Permanent solution is scraping away some of the plaster and then reinforce it with mesh material. But I just painted that wall. Not really eager now, maybe in a decade or so.

@nimrodery 4 ай бұрын

@@sjoerdtollenaar4089 I highly recommend not using mesh tape, if you do then use FibaFuse instead (looks like actual fibreglass) it will still absorb and bond with most if not all filler compounds.

@advancetotabletop5328 3 ай бұрын

Geez, why don‘t they make caulking in small super-glue sized bottles (not the tubes) so we can fine-tune these repairs? Thanks for the videos!

@mariav1274 4 ай бұрын

🇦🇺 Gidday!

@TheFunnyCarpenter 4 ай бұрын

Cheers Maria, hope you're have a great day on the other side of the globe.

@gordythecat 4 ай бұрын

My baseboards are so sad. Gonna get my caulk on

@crabwalk7773 4 ай бұрын

👍

@kevincrinklaw7422 4 ай бұрын

Like others, I liked the comparison on caulks. LOVED your vids on baseboards and caulking tips (sanding to pre-smooth a bevel in the tip OMG...). The DIYer in me stares at the 800 different type of white caulk and finds whatever looks cheap enough and would still work. Not much thought to the physical properties/etc... But seeing the stretch on the dynaflex was *chefs kiss* veddy nice! Any thoughts on doing an in-depth video on your caulk (yeah, go ahead and laugh)? There's enough options out there, might be worth knowing what sort of properties we should be looking for for special applications.

@xbadandy182x 4 ай бұрын

Wer back talkin' caulk

@Skeelful 4 ай бұрын

If that internal joint was coped and not mitred this wouldn't have happened in the first place.

@twm4259 4 ай бұрын

Yes, coping is the way to go and it is not difficult.

@user-zq6pj5jo8j 4 ай бұрын

He said "Moist"...HeHeHe...:)

@tedmcdonald3377 4 ай бұрын

😎⚒️😎⚒️😎

@TheFunnyCarpenter 4 ай бұрын

Cheers Ted:)

@chaseme9860 4 ай бұрын

Or you can do your trim correctly and use a coping saw.

@centurionhomeinspectionsin2253 2 ай бұрын

Old credit card works great for the corner.

@kimmole1096 4 ай бұрын

Cut the scribe properly in the first place!

@TheDigitalGuerrilla 3 ай бұрын

It took me less than 1 minute: I hate myself all the time

@jeremyfoster6942 4 ай бұрын

Never use internal mitres in the first place!!! This is why!!!,

@disgruntled_llama 7 күн бұрын

Ok..now do stain grade Oak

@BCTCanadian 4 ай бұрын

So the real question is how do you pronounce Alex Plus caulk? I’ve heard you’re actually supposed to say “a-lex” (aylex) instead of “Alex” because the product is an “acrylic latex” caulk. TomAto tomato :)

@davidedwards4720 2 ай бұрын

To all the internet pros saying those should be coped corners. Yeah we all get it. But the reality is 99% of houses that get constructed have mitered corners because it is faster and time is money to builders. So there are millions and millions of corners like this out there that need help to reduce the appearance. And let's not kid ourselves, even coped miters can show a crack along the cope line.

@chippysteve4524 4 ай бұрын

Those gaps are hideous and scream that the skirting/baseboard was fitted by a cowboy. Only cowboys use mitres. Pros always cope the inside corners which will minimise any gaps down the road. This is even more important when fitting to stud walls which will almost certainly shrink a bit when the house starts being heated. If you cope the boards then you can fit them perfectly even when the walls are really out of square and plumb due to errors in bricklaying and plastering on houses that are centuries old.