How To Make Perfect Baseboard Cope Joints!

[@mattschoular8844]

I just finished my basement and like every trim job I have ever done, it's coped 100%. Because I am also the painter, I don't even consider mitered inside corners. A good tip for final sanding of the unassembled cope joint... make a sanding block using a scrap of baseboard. Use spray adhesive and glue the sandpaper to the profile...

[@live2ride77]

OMG. The baseboard scrap sanding block is genius!

[@mattschoular8844]

@@live2ride77 I'd like to take the credit but I saw the idea on another video awhile ago. I just can't remember what channel.

[@TheFunnyCarpenter]

That’s a great tip, I’m going to try it out. Stay tuned maybe I steal this idea and make a video😂

[@Tsamokie]

In 73' when I was learning finish work, I was taught to cope inside corners. That is the way I have done them ever since.

[@POSPrez]

I agree, coping can look clean in certain applications, however, I hate the way the top of the joint looks. I typically cut my insides at a 44° & outsides at 46°. If the base is open in the back, it’s minimal and the caulking hides it. If the corners really bad, use the angle finder. Stain grade, angle finder on every corner. Write the angle on the wall behind the base.

[@jarthuroriginal]

While working as a trim carpenter, I learned to love coping the baseboard. Few things in life as satisfying.

[@TheFunnyCarpenter]

🍻have a great weekend and thanks for checking out the video

[@user-ed5jh3ff6u]

Finish carpenter for over 4 decades, there are many tricks that make mitering fast with excellent results, typically on painted millwork I use a glued miter joint to prevent callbacks for cracking corners due to wood movement, on prefinish coping with a Collins foot and a shaper made with scrap and sand paper usually give excellent results with decent speed, but there are always carpenters out there that say “ you can’t do that “, with the specialized tools of today technics need to change.

[@joef1551]

I have been doing trim work for the past 40 years in high end custom homes. I do cope the baseboards only because I think it is actually a little faster. You can cut all the flat pieces 1/16th short it won’t matter because the cope will cover it When you back cut the flat part of the miter with the saw it’s only the profile you’re taking out with the coping saw saw. it literally takes 10 seconds with a good coping saw. That being said if you know how to mitre your angles and adjust your saw You can do just as good of a job mitering. so instead of 45 all the time you Can just do all your inside corners at 44° and make everything a tad long and spring fit it. It will look just as good as any cope

[@TheFunnyCarpenter]

Well said!

[@guyod1]

inside 44 outside 46.

[@Klatubarada1979]

Nice tip! I guess im less experienced but I for sure do quicker work doing miters that copes. I worked for my brother who built spec houses and he would laugh his ass off me doing coped inside corners. We're in the south and I never see people cope (I'm sure there are some).

[@michaelgarrow3239]

Yep

[@shaynesabala]

Thanks for the video, I'm about to build and build and install base board in my entire house and I know this can make the difference between good and great.

[@SublimeWanderers]

I always try to arrange my coped joints so that they are on the shortest peices. It makes it so much easier to square cut both ends of the biggest peices. Obviously if the room is just your standard rectangle with 2 doors that's irrelevant, but I often get to do my copes on peices under 5 feet which is really nice.

[@patrickday4206]

Doing that also helps if you make a mistake because the piece is small so minimal waste

[@Sol-hl2rj]

… From a carpenter, with real life experience. Nothing really fancy, just straight forward good craftsmanship. Great interesting video. I really liked the from right to left approach, easy to forget for us non professionals that proven methods makes efficiency 😅

[@TheFunnyCarpenter]

Thanks Sol

[@markharmon4963]

I do small base board jobs for clients. This will give me a good way to think through the work.

[@mikeregester25]

When I took my building trades class in high school, we were taught to use the coping method. I’ve always found that it gives better results and quite frankly I enjoy it more.

[@ccadama]

@The Funny Carpenter. Thanks for the coping lesson. I'll keep in mind to start from one side of a room and move in one direction. Keeps me from having to constantly switching from left or right hand cuts. I see that caulk is not always your friend. Coping a joint is better rather than using caulk for hiding the sin of a bad joint. The carpenters who trimmed my house definitely had stock in a caulk company. Hope you and your family stay safe and well.

[@TheFunnyCarpenter]

Thanks buddy, have a great weekend!

[@markk3504]

Of course you've heard the old adage, "caulk and paint makes you the carpenter you ain't." Maybe that explains your carpenters!

[@michaelrichter9462]

You nailed it..... DIY..er here. I've done both. In my limited experience, on my own, simple base geometry, I've mitered. If it's busy I would agree coping is so nice. I'm not a pro, so going slow is not a problem... Mr. TomPara below is spot on for first timers, a dremel with a barrel sander insert is your friend, Find some cheap base, and practice a few corners. A quick (edit) You want one of these. Starrett Miter Saw Protractor, Prosite 505P-7. I'll let you do the affiliate link to you know where.... I have literally bought three, two as stocking stuffers.

[@donaldp9259]

I've been coping baseboard in my room do-overs ever since I learned about it a few years ago. Instead of a coping saw, I use a router with a 45 or 30 degree bit. I can use two hands to control the baseboard and really get exact material removal along my profile. I can do the longer pieces by setting up a support along the length.

[@jeffpower6473]

Oh man. Professional finish Carpenter here and cutting a cope with a router sounds EXTREMELY interesting. I’d like to see that

[@donaldp9259]

@@jeffpower6473 It's really a nice way to do it. Just mount the 45/30 degree bit on your table router, lay your trim flat on the table, and carefully follow the profile revealed by the 45 degree saw cut, just like you do with a coping saw. I'm clumsy with a coping saw and this way gives me a cleaner, more exact trim.

[@jeffpower6473]

@@donaldp9259 my dad did something similar with the table saw. However long pieces could prove clumsy. The idea of free handing it with a router is intriguing to me though. I’m going to search around for a bit that could work. The newest generation of palm routers makes freehand routing pretty easy, I do it all the time for various tasks on the job site.

[@bloodxviii7546]

Thank you , I’ve been looking to improve my carpentry skills and I’m good at mitering the angles but I hate having to find the right amount of degree to cut. Tried coping my first time a week ago but of course I didn’t have a coping saw so I struggled

[@josephppopp7493]

A wonderful considerate explanation. Now I’m ready for oak moldings. I love golden oak trim.

[@kentp.2309]

After doing a lot of trim in DIY fashion these tips are really nice. Coping seems like it would take longer (maybe not for professionals) but definitely a good tool to have in the kit. Thanks

[@michaelosmon]

A good blade on a coping saw cuts pretty quickly. I just do the whole thing on my miter saw stand. Works great for me. Thank you

[@josephgrillo7757]

Thank you for this tutorial. I learned a lot (I'm fairly new to woodworking). You have a terrific presence - very clear in your presentation. Thanks again

[@Jacob_Dwyer]

This would have been more effective with stain grade, because regardless of coping or mitering, if you're going to paint, you should caulk (or spackle). And if it's stain grade, you should cope. It takes more time initially, but once you get in to the swing of it and stop making mistakes it goes fast enough. Tight joints mean less time on the caulking step, and checking square on the corners is wisdom.

[@joshuahellriegel3354]

Perfect timing for this to pop up, I always start to hate myself when I start coping crown. Just doing my own stuff at home so I have to re-learn every time I take to the saw, but it seems worth it when the joints are tight.

[@TheFunnyCarpenter]

😂

[@jwest764]

Exactly how I was taught to use the coping saw. Even down to using the dropsaw to do the first neat cut. All the way in Australia, before youtube. 😄

[@davidguy6408]

Coping all the way for the win funny carpenter little thing I like to do use your CA glue and glue a piece of the sand paper to a little scrap of the baseboard on the profile side and it works great for for cleaning up the coped ends 👍

[@TheFunnyCarpenter]

That sounds like a great idea.

[@jokatim]

Love the video. I have just one difference in how I was taught to layout a coped room. It’s difficult to describe but I was taught not to work one direction around the room but rather to consider how it was going to be looked at. Always look at the square cut along the coped piece and you never see the sawcut of the cope. So if you stand at the door looking into a room the far wall should have 2 square 90 degrees cuts while the coped pieces run along the adjacent walls etc. I guess I’m just old school but my instructor was a stickler for doing it right and 40 years later I’m still as fast as the mitred corner hacks. Lol. Btw I use a jig saw method. Very quick.

[@TheFunnyCarpenter]

Excellent advice Henry.

[@forposterity4031]

angle grinder with a sander disc, is the fastest easiest way I've found. works for both mdf and real wood, just melts through it and being round the disc makes perfect coves or flats.

[@dans4900]

We both must be old cause that's how I do it. I always finish to the door on both sides

[@TinekaJasonPalmer]

I use copping method always. I start with square cut on both ends on the wall opposite the door. Then a cope cut into that piece, working my way around the room in both directions to the door. That way you will never look into an open cut from the entrance if anything moves or opens up with time.

[@dans4900]

That's how I do it. Can't even see the cope

[@slpstang08]

Thats a good idea.

[@richmac918]

I've mitered and coped (typically doing the miter when I'm in a rush) but the coped joint not only gives a better looking joint but I've found that my miter joints had the tendency to open a few years later. Not certain why (maybe wood dried out and shrank) but I've never seen a coped joint open no matter how many years had passed.

[@22Buckman]

Omg...that opening is gold!

[@captdanko468]

As a trim guy for a few years now I'd recommend miter saw and CA Glue and just take ur time measuring and cutting ever 32nd counts and remember the sheetrock can flex some so make it tight. 😉 the time it saves is a lifetime of playing with your kids.

[@Cankoda15]

It’s defiantly a personal choice but once I started coping with a coping foot it’s made things so much faster and easier for me! One thing I like to do is use the mitre saw like you showed, then the jigsaw to do maybe 80-90% of the cut and then use a dermal with a bur to get it perfect and if need be a file, gets me some pretty good copes but takes practice not to go too far, but once you get the hang of it it seems like a good system! Works for me at least!

[@christophercrawford2736]

I think it’s compliantly a personal choice.

[@bartbug1]

Makes sense to me, I've always started my skirting boards (baseboards) on the wall from the opposite of the door...just the way I was taught. But I'll try your method on my next fit out.y..i like to use a scrap block of timber on the end of or top edge of the baseboard and hold it tight to the top edge to eliminate and tear out . Nice Feestool drop saw to you lucky bugger, awesome saw but hope to own one. Cheers mate.

[@s70cas7ic0]

I’m waiting for a coping saw to arrive, in the meantime I tried the angle grinder (first time ever installing baseboards) and I have find it not terribly hard. The body position is important to have a firm grasp on the grinder, having one shoulder and both elbows supported did the trick

[@s70cas7ic0]

Also my house (70yo mortar and stones in Italy) have one wall that lean in like crazy, I was able to get a decent fit by making the fist cut with the same lean angle, that’s something that the YT videos I watched didn’t mention

[@fuelboy]

This is a great tutorial! I will miter first, test fit, then go with the coping saw if needed but I like your method of coping to isolate the curves.

[@qwincyq6412]

There’s a certain satisfaction in coping a joint and seeing the nice fit

[@LTDan-pk3mx]

Dude you nailed it.. Of all the videos ive watched yours is BY FAR (Yelling) The Best Thanks so much.. I already have a Makita 12" double slider.. but obviously have not used it to its capacity.. Well here we go.. i will let you know how it went!! Thanks again

[@LoganX00]

Saw a video on coping and decided to give it a go. After the coping saw though I ended up cheating with power tools which worked out rather well. I agree they are much more forgiving on corners.

[@cjsawinski]

20 plus year carpenter here… I think I’ve only mitered one inside corner in my entire career… coping is def fastest, easiest, and best method. (For the pro’s at least). Angle grinder is my preferred method.

[@trig]

After a couple of rooms coping becomes second nature. A small tip is to not cut the non coped end square. By cutting the non coped end at an angle it will push into the plaster allowing you to cut the skirting a couple of millimetres too long. Now when you come to place the skirting against the wall place the non coped edge against the wall first, bow the skirting in the center and put the coped edge in place. Push the bowed center of the skirting against the wall and fix in place. I hope you can make some sense of that.

[@TheFunnyCarpenter]

Good comment Michael, 🍻

[@treytavares1727]

Will need a video explanation.

[@MichaelLaFountain-d5i]

I spray glue a piece of baseboard about a foot long and stick the sandpaper to it. It makes for a wonderful sanding block in the shape of your baseboard.

[@rivernet62]

That is a classy detail. Sign of a craftsman. Nicely played.

[@mistervelux]

Brilliant video! Thanks! Time to up my game.... always avoided coping...

[@TheFunnyCarpenter]

Cheers Anthony

[@SpringRubber]

Cope, cope, baby. I'm a DIYer with ok results using a hand saw and Stanley miter box, as well as a power miter saw. But coping the inside corners is the way IMO, if you have the time and desire to do it.

[@TheFunnyCarpenter]

🍻

[@raminybhatti5740]

I cope with an angle grider. Finally got it down to an art without sacrificing on time.

[@bertall1ca]

I use a dremmel rotary tool with a small sanding drum to get the sanding nice & fast.

[@Faustustopheles]

I'm going to try it for the first time in our newly remodeled room. Tgis is the last part and I have all the pieces. I cut them each a foot longer than they they needed to be at the store because I'm afraid of messing up. I was going to miter originally but the mlre I thought about it the less I felt confident in my miter skills and coping just makes more sense to me even if it takes more time.

[@JoeBlough822]

I set my angle to 44.5ish (45.5 on outsides) and back cut. Works great

[@LarryB-inFL]

If you have ever coped with a small angle grinder on MDF molding, you will never want to go back to the alternatives!!!! Seriously. There are lots of videos out there on it. It is soooo fast and soooo easy!!!

[@shawnr771]

Good stuff and explanations. I can see why coping is better but I will not be using it anytime soon

[@whatthehellimbored]

I use a trim router with an up spiral bit to cope...works great

[@TheFunnyCarpenter]

Interesting! Be cool to see that…all though sounds a touch dangerous.

[@atweetythuyvi]

LOVE THIS! So glad I found your channel by accident.

[@SnootchieBootchies27]

I use a flap wheel on my grinder for coping. Once you're used to it, it's way faster than a coping saw and way easier to control than a jigsaw. When I see mitred inside corners it just looks like amateur hour to me.

[@thezfunk]

Yeah, the flap disk angle grinder method is my go to now too. It was intimidating at first and you kinda need a steady hand but worth it.

[@TheFunnyCarpenter]

I use the Festool Ras mostly, but didn’t think a lot of people would relate to that.

[@ThekiBoran]

The issue with using a grinder is it kicks up gobs of fine dust. I'm a jigsaw a file guy. I use a variety of different file shapes, round, triangular and flat.

[@the_kestrelstudios]

Love your videos! Easily the most complete and professional, including anticipating and answering the questions your audience will no doubt have, that I have seen. As an engineer with a tendency to be a bit of a perfectionist, your concise and clear approach to teaching works really well for me. Thanks! I am about to embark on replacing all the trim in our 1980’s house. Regarding the “counter-clockwise” approach for us right-handed folks, when committed to doing the most professional job by coping as much as possible, wouldn’t it be better to choose what to cope based on the visibility of the joint from the perspective of the main entry into the room, rather than just progressing sequentially right to left? Or, is there something about the CCW approach that I am missing that is intrinsically better (I understand it is easier and more efficient)? Thanks again. Have subscribed.

[@TheFunnyCarpenter]

I appreciate the comment! You’re right there are definitely some scenarios where it would be better to adjust the cope side depending on the main viewing angles of a room. It can get more tricky and you definitely want to avoid working yourself into a situation that requires a cope on both sides. I usually just stick to counterclockwise unless it’s going to be a real obvious spot like at the top of a staircase or something. Either way the cope joint viewing angle will be substantially better than a mitered one. Cheers and good luck on your project!

[@nailbanger2]

Traffic pattern should always determine the layout of joints, whether inside corners or field splices. Predominant vision from the entry should be the overlap on a field joint (30 degree bevel), and a coped piece should be on the left of the joint with the square cut on the right. This is not a hard and fast rule, however. There may be other factors that take precedence in a certain situation.

[@jimanderson4495]

Wow. Impressive, but then again…you’re a professional. And Funny. Thanks

[@user-ed5jh3ff6u]

Use adhesive backed sand paper on a scrap to make a profile sanding block, I miter 99% of the time, especially with painted millwork, glue joints rarely open, so no call backs for cracked paint in corners, nice job.

[@kevinwallis2194]

I have a 1920 farmhouse/craftsman home, and throughout the 1st floor, they used 1x3 standard boards for the baseboard and just butted them together. its on my list of things to make look old again. I had to do the same with the lights. all were home depot garbage, and now they are 20s and 30s originals that i rewired.

[@ianthompson9058]

Your right, if you could be sure everything was Plumb and squere then mitres every time but there not almost every time

[@matthewblanchard7823]

Brilliant! I'm going to add this to my skill set.

[@gregpowell7097]

I cut maple trim (crown, baseboard, light rail, all week every week and I miter every joint perfectly.

[@GoldVP...]

I usually trim off the outside edge of the 45 cut, with a blade, and that mostly brings the 2 pieces closer, in case the existing wall corner has jutting edges. Seems to work great, and of course caulk is our best friend lol. I call it "Love in a tube" Love the cope saw though.

[@jimbendtsen8841]

Only lazy morons miter inside joints.

[@GoldVP...]

@@jimbendtsen8841 lol shows how lost you are! I stated something completely different!

[@Danny-ec8pu]

Mitter cuts is faster no doubt but come on the results that cope gives is outstanding, it might take a bit more time but less caulking and it looks professional

[@kevinfreimarck3301]

This is very advanced. And different tools

[@TheFunnyCarpenter]

It’s actually pretty easy.

[@kevinintheusa8984]

I always cope corners on base using a Dewalt 20 Volt jigsaw and a coping foot. It does take a bit of practice but once you get the hang of it then it goes fast.

[@TheFunnyCarpenter]

That’s a sweet set-up for sure!

[@AeiSedai1976]

I found the coping saw so hard on MDF! I cut it down on my mitre saw and the attack the back cutting with my dremel with a Cutting/Shaping Wheel.. should add I've had a stack of baseboard in my bedroom for 2 yrs - procrastinating! 100yr old house.. nothing is square

[@TheFunnyCarpenter]

😂haha, I know the feeling! I’m still working on the bathroom Reno from two months ago…. At least the toilet is back in now!

[@jasonbellows7]

For flat stock base, would you recommend just butting the boards on the inside corners, as well as filling the void where the round over edge meets the flat stock? Would love to see more videos on different types of moldings and how to manage them. Thank you!

[@TheFunnyCarpenter]

Yes I would normally butt them. How big is the round over? If it’s small caulking will cover it up.

[@jasonbellows7]

@@TheFunnyCarpenter very small. I’m not savvy with size maybe 1/8”. Very minimal void since I’ve butted them together.

[@h3lio5]

As a parent I’d say the perfectly coped joint is entirely more magical :)

[@davidwhittingham8617]

Interesting, in England we call this a scribe joint, we also do the scribe joint on internal corners into the moulding as viewed from the door, so that any shrinkage encountered in the future is not immediately evident as you come into the room, the external corners are mitred, I am an old school carpenter mind, things do change in the modern world, and I think standards do drop.

[@ismu34]

When I'm using copes I find the measuring process much easier as well.

[@MajesticDemonLord]

In NZ, the DIY recommendation is coping, due to the amount of geological activity, small and medium earthquakes can cause a mitred joint to split/move whereas a coped joint (with the same movement) is less obvious

[@petehanton5469]

Thank you, this explains everything I wanted to know. Great channel.!

[@TheFunnyCarpenter]

Thanks Pete!

[@HowIDoThingsDIY]

Huh. I never coped. Now you got me thinking!

[@TheFunnyCarpenter]

There u go video idea: coping for the very first time!

[@HowIDoThingsDIY]

@@TheFunnyCarpenter "Coping for the very first time! What could go wrong..."

[@lry76]

love the table you have for your mitre saw. do you have a video on how you made that?

[@GaryT1952]

I knew you'd come around!...excellent tutorial...especially the layout

[@TheFunnyCarpenter]

😂having mostly mitered my inside corners, I’d like to just be a jerk and say that it’s just as good… but it’s just not! The world could definitely use more cope joints!

[@concretealchemist]

Excellent video - very clearly explained.

[@the1981tree]

I simply cannot comprehend how cutting a profile on 45 degrees can give you the same profile as the straight cut. It really defies everything I have ever learned.

[@mitchd949]

Assuming a 90 degree corner, you must remember that the profile your coped joint will contact is protruding away from the wall. You're probably not visualizing the joint in three dimensions.

[@barkschat3135]

For painted base, it doesn’t really matter if it’s coping or mitering, but if it’s stained wood, coping is far better.

[@swordoftruth7862]

maybe so but if the house moves at all the mitered joints have the tendency to open up and even with the best caulk that mitered joint dosnt look the same

[@joshua.butler]

Excellent explanation and presentation!

[@huejanus5505]

A good trim carpenter can make both look good. I prefer mitres but have coped more than a few wonky corners.

[@padraigadhastair4783]

Nice explanation. I'm gonna try for sure. Cheers.

[@stuartgreenshields5591]

I find the biggest challenge with skirting boards isn't the corners (which if I was coping I'd do with a router setup to be way more accurate), it's the lack of squareness and straightness in every wall and floor. I often find it easier to cut out a lot of the back of a board to avoid these imperfections.

[@RPmusic06]

Really a great video bud!! I always love coping its just so satisfying, thanks for the great tips bud!!! Have a great weekend🍻👌🍻

[@TheFunnyCarpenter]

Cheers buddy have a great weekend🍻🔥

[@kimberlymorrison4880]

YOU"RE HIRED!! My contractor is THE WORST after watching your meticulous work! Great job!!

[@HandyRandy3200]

I'm by no means a finish carpenter but, I've had to start doing all of the trim work because I can't find anyone who will set their nails and caulk what's needed. Everyone leaves it up to the painter (me) to make their sloppy work look good so, I just do it myself. I've always found it easier to cope than to miter

[@bubbavox]

Hopefully I get a job that isn't so rushed that I can practice some coping -- as a punch-list, do it all kind of craftsman, I have to re-learn these skills each time. Do you have a video on outside corners? What do you think of wood filler on outside baseboard corners, or on mitered door casing top corners? Maybe glue the joints, then wood filler? (Talking paint grade).

[@TheFunnyCarpenter]

Outside corners I usually cut 45.5-46 degrees. That way the outer profile will usually meet. Wood glue and sand right away. Then would use some wood filler if necessary. Stay tuned I will make an outside corner vid in the future.

[@Krazy_Shorts]

Damn..this video almost makes me think that i can actually do this! Great vid. Great pointers

[@TheFunnyCarpenter]

Let me know how you make out!

[@sangriabiscus2856]

Good instructions. I made a coped end and placed on a left corner but it had a millimeter gap. Placed the same coped end on another corner and the joint fit perfectly. Why?

[@charisma-hornum-fries]

Thanks. I was pulling my hairs out in frustration over one corner that just wouldn't get right, becausethe ceiling and the wall are far from straight or perfection and angled. I bought some insanely expensive crown mouldings and if i didn't get this one right it would be costly to get a new length shipped home and start over.

[@tonyvolbeda952]

get a spiral blade for the coping saw especially for those trim that have much more elaborate profiles. better yet get a jewelers saw, little brother to a full size coping saw

[@dylanstevens5714]

Liked this video in the first 10 seconds 😂 not sure I’ve ever liked a video that fast

[@MrJbunch1]

I’ve have no problem using my angle grinder with a flap sander

jigsaw is my go to for the cope

[@billyd2593]

I prefer to cope, I use a jigsaw. I’ve looked at the Collins foot but have good results without it

[@SKYLIMI]

time is money, therefore cutting at an angle is faster, a protractor is such a tool 🙂

[@audibleadventures9004]

Git gud

[@RapTalesRewind]

Thank you sir. Now I know why Jesus was a Carpenter... it is very humbling, requires patience, and you need to be focused on each moment and if you can manage all these aspects, your jobs will be clean and rewarding.

[@terrybeaud9348]

QUESTION: When using coping method, what about material shrinkage (esp. MDF) and gap opening up in corner ?

[@markhansen4258]

I switched to coping once and eventually realized I needed just as much caulk that way as with mitering. I’ve switched back.

[@jalan6473]

This is a great method....if you have the time.....

[@Ana-lq7kp]

As always, great video! Thanks for the laugh at 5:36. Loved the music! 👍

[@TheFunnyCarpenter]

Thanks Ana, I appreciate you always checking out the vids!

[@davidr9876]

tried it once, and only once. Doing a tiny piece while sitting at a bench might not be too bad, but doing one on a job site wrestling a long piece is a lot harder and to be honest, I don't think most people who are not carpenters look down at baseboard trim all that closely. lol

[@toxicated3622]

i couldnt agree more

[@TheFunnyCarpenter]

Fair enough, that being said in my opinion it’s fun to get perfect fitting cope joints.

[@douglas60040]

As a professional carpenter, I ALWAYS cope inside corners as well as on crown molding. Sure, “most people” won’t notice and the client may even be nearly blind, but almost everyone has a friend or relative that will notice. The biggest factor however is that in time, the wood may shrink or the house might settle, leaving a noticeable gap. I certainly don’t want to return a year later to squirt caulking into mitered gaps, and I’d bet a novice won’t want to either. You wouldn’t believe the stuff I see that I makes me cringe, but I keep my mouth shut 🤐. Good on anyone trying their best though.

[@squireschown666]

🤦‍♀️

[@philsburydoboy]

I just cope the right edge of every single baseboard all at once with an angle grinder. Takes maybe a minute or two each.

[@muddywater6856]

Yes, almost always! But it takes time to master.

[@TheFunnyCarpenter]

I’m interested in seeing what happens when the average person tried to cope. I’m going to find someone that wants to try and make a video about it.

[@kemico1272]

Inside-corner miters tend to open up over time as the wood stabilizes, leaving gaps after 1-2 years usually. Coping inside-corners is always the way to go.

[@carlbeaver7112]

Paint grade just cut a few pairs of different angles - 44°, 45°, 46°... whatever you feel you need. Make them 6 - 8 inches long for a fair assessment (can make some a couple inches long for corners next to doors.) Write the angle of each on the backside. It *might* take 5 minutes and waste a foot or two of material - big waah. Use them when measuring your cuts and you're done. Sometimes a mismatched pair of angles works better than two of a kind. Also there are times when using super glue and accelerator as you would when doing crown mouldings works even better.

[@Santos-ek8md]

Great video 🏆

[@TheFunnyCarpenter]

Thanks mate