Mad genius!! Not sure I can pull this off. Will need to watch once again in full and understand what kind of tools I would need for this... Very quickly viewed over for first time to understand complexity.
@bxvideony10 ай бұрын
I have a late 2011 MBP I’ve been lucky about this issue with gpu but yesterday my mbp finally kick the bucket lol. I’m looking for a new laptop but would like to give this a try
@nicholaskerongee64224 жыл бұрын
It's a lovely video that you made. Can you please share the diagram of the changes you made in the Mobo itself? I would like to do it on my own. The process you shared seems easy but hard to figure out the changes you made in this video. Thanks
@hachapacha50813 жыл бұрын
i have mackbook pro 2017 touch bar with intel graphics issue.AMD graphics working fine. can you guys fix this.
@gadgetfix80773 жыл бұрын
we can inspect. thanks
@Cedarsea4 жыл бұрын
I’ve got the same model with the same boot up problem, how do I send it to you for repair?
@yohanmohabir19102 жыл бұрын
My Apple Mac book pro 15 inch have a white screen how can I get in touch with you so you can fix it for me
@Djvids-k6b3 жыл бұрын
I just baked my board and it helped for the time being. I would love to get this procedure done.
@gadgetfix80773 жыл бұрын
Baking is not a proper solution.
@Djvids-k6b3 жыл бұрын
I figured I would try it. My thoughts are, it wasn’t being used enough and when I baked it. heated the soldering which made it work again. The flu hasn’t had any issues since then.
@gadgetfix80773 жыл бұрын
@@Djvids-k6b As long as it is working that is fantastic - the only thing is we find that the boards which have had been baked or had other attempts such as reflow completely end up dead and we have no way of bringing them back even with this mod! Several years ago we would do similar attempts - but because we 100% guarantee all our work it was inconsistent and we could not warranty those jobs! The issue is actually often misdiagnosed - the problem is with the chips lower layer silicone and not the solder joints - reheat methods are a hit and miss.
@Djvids-k6b3 жыл бұрын
@@gadgetfix8077 i bet many people have done it before and have had it permanently fixed. It was in there for 7 minutes at 375. Also computers get that hot on there own. i do not think my unit is broken from baking it. I did it one time.
@Pengzi19603 жыл бұрын
I just revisited this video, it makes me wanna to repair mine too :). I'd like to know how you flash the EFI-chip or is there a way that I can buy modified EFIs from you. I've got 2 MBP 15" 2011 (one 'early with an i7 2,0' and one 'late with i7 2,2 ghz') and they both are dead on the dedicated GPU. So a suggestion for how I could get these machines to work will be much appreciated! Thank you if you can reply me here!
@gadgetfix80773 жыл бұрын
We just install the modchip. thanks
@baliproject4881 Жыл бұрын
@@gadgetfix8077 hy i just got metod from website that said just simply remove 1 resistor named r8911 on the 15″ mac taht control power ,did anyone ever done it before? i just scared when i try this one metod
@stephenpartridge6862 жыл бұрын
How much does this cost to get done?
@chocolatedug3 жыл бұрын
To whom and where do I need to send mine to have this brilliant fix applied?! and how much would it cost me?
@gadgetfix80773 жыл бұрын
You can find all our details on our website
@mrbond5904 жыл бұрын
I got a MacBook pro same problem like that can you fix for me
@gadgetfix80774 жыл бұрын
Sure thing
@edgypotato20174 жыл бұрын
Hey, I’ve got a 2011 MacBook Pro, just like that one, it has the same issue, could you guys fix it if I sent it to you, and how much would it cost?
@StikkiP4 жыл бұрын
Yeah same deal going on. What’s the average price to have this done???
@ClapDeal014 жыл бұрын
have paid mid hundred for same issue in Pasadena in LA
@danilodalfonso21253 жыл бұрын
Would It Be possible to flash a different GPU with the original's GPU BIOS and then put that on the MacBook?
@DJIronMIc4 жыл бұрын
Thank you! wonderful video... i'm interested in getting my 2011 MBP GPU fixed. Is there a website were I can pay for your service ?
@telmooliveira42404 жыл бұрын
Any luck?
@DJIronMIc4 жыл бұрын
Telmo Oliveira if you have a 2011 MBP I would try this method first kzbin.info/www/bejne/pHepgZ5piMqEmLM
@telmooliveira42404 жыл бұрын
@@DJIronMIc when I press the start button it only stays on for 5-7 seconds....and then it restarts over and over. I cant use any shortcut or get into any mode... :(
@DJIronMIc4 жыл бұрын
Telmo Oliveira from the sounds of it I believe you’re having HD issues. Are you having any issues with video/display?
@telmooliveira42404 жыл бұрын
@@DJIronMIc the display doesnt show any signal of working... I 've already used another hd and no luck... my guess is the video chip is not working at all....
@felixVanDiemen5 жыл бұрын
Thanks for the video, however it’d be a lot easier to watch if you edited it.
@gadgetfix80774 жыл бұрын
100%
@Pengzi19604 жыл бұрын
It's possible to use "fast forward" on these videos you know :).
@felixVanDiemen4 жыл бұрын
@@Pengzi1960 On a well edited video, you don't have to ;-)
@hyunopoien69183 жыл бұрын
How much do you charge for this service
@ridaventureid2640 Жыл бұрын
How much does it cost to fix this kind of issue for the same model?
@MARCELO691494 жыл бұрын
excuse me my friend where is your location...i have 2 macbook 2011 ....15 inch and 17 inch ...both of then make me headache....i want to fix them...
@gadgetfix80774 жыл бұрын
Details on our website
@jonnolavis74884 жыл бұрын
Hey guys I have this exact problem, I was going to try the flowing solution but it looks like that might not be very effective long term? I’m based in Europe and this fix is not an option for me without the right tools. Do you offer a mail in service for the board repair at all?
@gadgetfix80774 жыл бұрын
Please do not reflow. Its the worst thing for the board
@ronaldanomorales4 жыл бұрын
you remove capacitor and put jumper only? or you put bypass hardware?
@gadgetfix80774 жыл бұрын
Resistors need to be removed. One is for dgpu power and other for backlit controls
@JUMPiYZ3 жыл бұрын
@@gadgetfix8077 but you also replaced the bios chip ?
@megaobi3 жыл бұрын
@@JUMPiYZ no i did not
@gracekelly74032 жыл бұрын
Sir i have macbook pro 2011 15inch OS Sierra, i7, ram 16gb & SSD 120gb. But i still have problem in booting up. It takes 2,5 minutes. It used to take 15 seconds only. How can i solve that?
@shiellamay20072 жыл бұрын
hello sir i have a same macbook pro gpu problem, its hard to format high sierra its took for 4 to 5 hours before format is suced you know, this video is working for my macbook pro?
@kassiomaaia5 жыл бұрын
Hey thanks for this video! I have one in the same situation but unfortunately I couldn't identify witch resistor you took out. Do you have any schema to share with us? thanks
@gadgetfix80774 жыл бұрын
Schematics are very easy to find online
@JulieAdadjo5 жыл бұрын
Thanks for the video! Very informative. For the layman, it's a bit daunting to try doing, so just wondering if you receive customers machines from around the world? If so, how about from the US? Alternatively, how could I find similar places/services here in the US? Again, this is a great video.
@gadgetfix80774 жыл бұрын
Not sure who offers this service in u.s Most of the time people reflow or do software mods which arent permanent
@ClapDeal014 жыл бұрын
mine have been done exactly same by a store in Pasadena in LA. I was think about to replace GPU, but this one less cost and onboard video seems fine for me
@linassaulys21294 жыл бұрын
@@ClapDeal01 Can you share the name/address of store in Pasadena. Thanks
@baliproject4881 Жыл бұрын
@@gadgetfix8077 hy i just got metod from website that said just simply remove 1 resistor named r8911 on the 15″ mac taht control power ,did anyone ever done it before? i just scared when i try this one metod
@chiphoward71184 жыл бұрын
How can I contact you directly with a question for my 17" 2011 Macbook pro?
@baliproject4881 Жыл бұрын
hy i just got metod from website that said just simply remove 1 resistor named r8911 on the 15″ mac taht control power ,did anyone ever done it before? i just scared when i try this one metod
@rubylovesglitter3 жыл бұрын
Hello, do you fix GPU on 2019 MBP?
@fmaion4 жыл бұрын
Are you able to run an external monitor with Thunderbolt with that?
@gadgetfix80774 жыл бұрын
Negative external monitor wont work after this mod.
@Dawid_The_Man Жыл бұрын
What i do is i take out the motherboard snd the heatsink i get like a heatgun to heat both the processor and the graphics card and put it all back together and it was working but one day it just randomly restarted and i got the lines so i shut it down wait like 10 seconds and turn it back on and it worked!
@SuperDJsEnt5 жыл бұрын
Great video but, I too failed to identify the resistor you too out. Please help!
@gadgetfix80774 жыл бұрын
R8911 and r9704
@KBDxTokyo4 жыл бұрын
I have the same MacBook with the same problem and I don’t know how to fix it. Could I pay you to fix it for me?
@gadgetfix80774 жыл бұрын
Yes sure
@hc3fusion14 жыл бұрын
Thanks for the video - can you tell me where are you located? Perhaps you can help me fix it. Are you in Melbourne?
@hc3fusion14 жыл бұрын
I also have the same problem with my late 2011 MacBookPro 15” (model A1286). I had the logic board (Graphics card/GPU failure) replaced in 2016 By Apple Store and failed again 3 weeks ago. One other issue is intermittent loose USB connection which may require checking. If you charge similar repair price as advised to Poptn2nd below, I will consider having you investigate/repair it asap. Please advise company link for shop address? I will drop by if you guys are in Melbourne. Thanks. PS: I also had my hard drive replaced/upgraded in 2017 so it been running okay until now!
@gadgetfix80774 жыл бұрын
Yeh sure, you can visit us at our office at 102/620 st kilda rd Melbourne
@shushiba92174 жыл бұрын
Can I use AMD GPU after try this method? or ...
@gadgetfix80774 жыл бұрын
Negative
@ProjectHellfire14 жыл бұрын
How much do you charge for the mod? Im interested and short distance from St Kilda :)
@gadgetfix80774 жыл бұрын
$250
@timglass25574 жыл бұрын
Can you tell me while this is a fix do you replace the GPU with anything? I do a lot of work in Photoshop. Also how much do you charge?
@gadgetfix80774 жыл бұрын
Negative. We do not replace gpu
@amdintelxsniperx3 жыл бұрын
its not worth it . the gpus are defective unless you get the ones from hp that have the red substrate
@ebrufilmslimited8364 жыл бұрын
Can you watch youtube & videos on it. Im hoping to install linux on it. Are you based in England?
@gadgetfix80774 жыл бұрын
We are based in Melbourne Australia
@Pengzi19604 жыл бұрын
Which microphone / headset did you use for this video. The sound was terrific and I thought you were in my living room, Thanks for a great video.
@gadgetfix80773 жыл бұрын
i cant remember probably the inbuilt one with the device.
@benjaminberdou9594 жыл бұрын
Hi, thanks for the video. I have a similar issue in my macbookPro 2012 mid 2012. Do you know how can I do to fix this problem?? I heard you talk about this issue in 2012 models but I dont know whether you give some steps or not... Thanks in advance.
@gadgetfix80774 жыл бұрын
2012 models have different issue
@popitn2nd5 жыл бұрын
I have this problem on my 2011 macbook pro 15”. I would like to send this in for repair. How much for the repair cost like this?
@gadgetfix80775 жыл бұрын
We charge $250 for this mod
@olesolja14074 жыл бұрын
Gadget Fix shipping included?
@popitn2nd4 жыл бұрын
Gadget Fix would be cheaper if just send in just the logic board?
@Remergence5 жыл бұрын
It worked perfectly untill i reset my NVRAM, do you have any solution for this?
@gadgetfix80775 жыл бұрын
Without this mod it will just keep coming back
@adrianmantilla8858 Жыл бұрын
@@gadgetfix8077 dónde consigo el mod?
@enzoe.68975 жыл бұрын
Will this mod work on the mid 2012 15 inch non retina too?
@gadgetfix80775 жыл бұрын
Negative this is for 2011 models only 2012 have different issue
@djukicdusan23325 жыл бұрын
nice job! can you tell me which is the model of yours soldering iron tweezers? thank you
@gadgetfix80774 жыл бұрын
We use jbc nase soldering station
@fabioseabra58874 жыл бұрын
resistor r8911????
@mac84634 жыл бұрын
will this work on a late 2011 17inch model
@gadgetfix80774 жыл бұрын
Yes
@Bbnyokes4 жыл бұрын
where in Aus are you guys located?
@gadgetfix80773 жыл бұрын
Melbourne Sir! :)
@Jesus.R.Flores4 жыл бұрын
Can I just send you my MacBook and you do this for me? How much would you charge me?
@charlysteiger4 жыл бұрын
you can also do it by coding on and disabling the crucible and blocking the access to AMD video card
@fixsquad94225 жыл бұрын
would you care to tell me where can i get this mode?
@gadgetfix80774 жыл бұрын
Cmizapper
@billlemiska48604 жыл бұрын
Will this work on 17inch 2011 I just replaced battery and upgraded to 16gig ram and now this problem.I’ll even upgrade to ssd if I can resolve this latest issue
@gadgetfix80774 жыл бұрын
Yes
@yoliseth4 жыл бұрын
What about the 2915-B??
@gadgetfix80774 жыл бұрын
Yes will work
@jenkah4 жыл бұрын
Man, i have the same problem with two macbook pro, the thing is that when im booting them from a windows disk it works fine.
@gadgetfix80773 жыл бұрын
with the failing gpu eventually it will even stop booting
@wakkowarner95223 жыл бұрын
no anti-static wrist strap 😳
@dugudr4 жыл бұрын
Is fixing means fix or by pass amd?
@gadgetfix80774 жыл бұрын
Permanent bypass
@iAmFAUST4 жыл бұрын
I don't trust myself. Do you do these repairs and how much would it cost?
@gadgetfix80774 жыл бұрын
$250 installed with 12 months warranty
@iAmFAUST4 жыл бұрын
@@gadgetfix8077 Where are you located?
@gadgetfix80774 жыл бұрын
@@iAmFAUST 102/620 St kild! Rd Melbourne.
@iAmFAUST4 жыл бұрын
@@gadgetfix8077 Ah damn.. I am in the states. :-(
@VQROZETHROZAY4 жыл бұрын
I need this mod to be done.
@paulbarton34283 жыл бұрын
bit of a joke, your using the terias gpu chip, and just running 2 wires for brightness, why not mention the chip?
@gadgetfix80773 жыл бұрын
Good point
@B3nnywhit34 жыл бұрын
Where are you guys located so I can take mines in?
@gadgetfix80774 жыл бұрын
Melbourne
@pleasehelp15094 жыл бұрын
I can not so this myself. Do you do these repairs and how much would it cost?
@gadgetfix80774 жыл бұрын
We charge $250
@Capitanig44 жыл бұрын
¿Good day, would one bê able to do photography and vídeo editing once this is done?
@gadgetfix80774 жыл бұрын
Yes but restricted to integrated graphics only. So basically the macbook will perform like a 13" model
@untungwidi2 жыл бұрын
@@gadgetfix8077 hi..can you send video completely to me?
@chandanbiswas39103 жыл бұрын
Excellent
@trongdo39484 жыл бұрын
Hello Gadget fix , My Macbook pro 2011 15" is same this GPU problem, Can i send my Macbook to you fix it ? if Ok , can you give your address to me ?
@gadgetfix80774 жыл бұрын
Yeh sure everything is on out website!
@MrVendorX5 жыл бұрын
So what you did exactly? A mod..? Which mod and what is for? ... I get it ... you just saw a solution on KZbin and copy it ...
@gadgetfix80774 жыл бұрын
The mod is called TIRESIAS and no we didnt hust watch on youtube... 😂
@Whatyousee14 жыл бұрын
Mr VendorX doe it matter where he got info.
@Ninja-Alinja4 жыл бұрын
after 2 weeks of messing around with my broken Macbook 15 (early 2013) screen would go blank after login couldn't enter safe mode, because SDD encrypted screen would go blank before login on bootcamp windows 10, no safe mode possible either = > after research it seems that the discrete Nvidea GPU is dead, a problem that Apple managed to migrate through 3 generations of macbook pros and several MacBooks and MacBooks Air. Quite an achievement. since I don't want to solder around, missed the repair programme, because Apple screwed me over by never telling me about it or pay 100s of $ for repairs or DEFINITELY not get a new computer (least another macbook) try this: solution (for me anyway): 1. Enter recovery mode after booting with cmd-R 2. enter Terminal $ csrutil disable $ nvram boot-args=”nv_disable=1” $ csrutil enable $ reboot 3. that's it. in more detail: my macbook (15 retina, early 2013) has an encrypted HD (so I can't start in safe mode or single-user mode) and it went black right after I logged in, so no chance of installing the gfxcardstatus app everyone is raving about. But this works, and takes only 5 minutes. tried several re-starts, still works, loosing brightness control f1-f2 and restart on clamp-close apparently, but what the ****, I can use my computer again. Same problem with my bootcamp windows 10 partition, screen went blank even before login and couldn't enter safe mode, so had to re-install from USB stick, and de-activate Nvida in the device manager and re-built system from there manually, as soon as I would install the correct Nvidea driver, screen would go blank again. (enter safe mode, de-activate Nvidea, rinse, repeat...)
@dominick54224 жыл бұрын
heatseeker so all the things after $ we type as a command because I tried that and it says the commands can’t be found
@Ninja-Alinja4 жыл бұрын
[]NOTZZLE [] it’s been a while, not sure. Important, this only works in the terminal when running the recovery mode, not regular terminal.
@joeblow19424 жыл бұрын
heatseeker Do you know if the same instructions and code will work for a 2011 MacBook Pro 17? Will the computer stay the same after you’ve updated the operating system or does it revert back to what it was before you fixed it?
@Ninja-Alinja4 жыл бұрын
867 5309 no idea, sorry
@gadgetfix80774 жыл бұрын
No need u8900 need to be resoldered
@teegees4 жыл бұрын
Where can I buy the chip?
@gadgetfix80774 жыл бұрын
Cmizapper
@edbeck10294 жыл бұрын
thanks for taking time and effort to post this video. However, pretty useless for anyone who wants to see what you are doing and why you do it. example at 14:09 you talk about install of "bias chip"? When did you talk about that or show how you installed it? Is that part of the video problem you address in this video? And at the end you show two yellow-green wires that you apparently installed. When did you do that? Where are the details? What for? Frustrating to watch not to mention it needs much dead time edited out.
@gadgetfix80774 жыл бұрын
Yes you are absolutely right. This video is not really a tutorial but overview of how we perform mod.
@69paladin2 жыл бұрын
Whats your address i need you to ship mine to you for repair
@omarshakhshir-r8v9 ай бұрын
now the best alu macbook is 2008 and 2009 wow
@armandoponce-garcia84942 жыл бұрын
I cannot tell what you are doing. Sorry, this is too advanced for me.
@bombacimulayim145310 ай бұрын
permenently cripple it by dissecting :)
@encinobalboa4 жыл бұрын
Disabling GPU results in an email machine.
@amdintelxsniperx3 жыл бұрын
the hd6xxx gpu are getting pretty weak . the hd3000 with 1600mhz ram (for the 2.2ghz and 2.4ghz ) works just fine
@gadgetfix80773 жыл бұрын
wrong - works just as 13" macbook pro would.
@encinobalboa3 жыл бұрын
@@gadgetfix8077 Bad fix. Do the repair right and stop giving bad advice.
@gadgetfix80773 жыл бұрын
@@encinobalboa wrong - its the only permanent fix. Done hundreds of these none have come back. THanks
@megaobi3 жыл бұрын
@@encinobalboa LoL there is no other fix for this machine! :D :D :D
@djjammindave Жыл бұрын
SO WHAT THE HELL HAPPEN HERE. A FEW SCREWS OUT, A CLEAN UP JOB AND WHAT ELSE? REMOVED AND REPLACED THE GPU OR HEAT IT UPTHE GPU? VIDEO IS NOT ALL THAT !!!!
👎🏻! На канале Louis Rossman объясняется, сам кристал не умирает. Достаточно перенакатить шары более тугоплавким припоем и проблема перманентно решается с полноценно работающей видео картой AMD.
@Kmakaot3 жыл бұрын
@@Alex-xp2em давно это было в одном из этих kzbin.info/www/bejne/roPal32mg9uKf5I kzbin.info/www/bejne/qpekhXqBfcRmb80
@dagr8kerek4 жыл бұрын
Check out Dosdude1’s fix of the 2011 mbp. It’s a lot less invasive
@ViktorVoda10 ай бұрын
where i find?
@EnryBi3 жыл бұрын
just use an hair dryer: @qh60
@AbujanDisco5 жыл бұрын
Better solution: do yourself a favour and bin it, then go buy a more powerfull device with 1/2 the price.