Resurrecting the Donated 2011 MacBook Pro (Bypassing AMD GPU)

[@Pantosoft]

michael should have at least 100k subs, his videos are useful, enjoyable and have clear instructions! Good job Michael, Subed to you since 2014!!! :D

[@MichaelMJD]

Thank you man! I appreciate you sticking around.

[@Pantosoft]

@@MichaelMJD:)

[@afarewelltokings]

He should have way more! I’ve been subbed for as long as I can remember.

[@Vicorcivius]

Ive been subbed to this dude for quite awhile. The reason he does not have a huge sub count is probably because the normal run of the mill moron out there is thinking that windows 10 and the latest hardware that comes out is the be all end all of computing. Even though its one of the worst os that is currently out. Windows 7 is far superior to windows 10 just in being stable.

[@teh_supar_hackr]

I've been subed to him since like 2013 and am still following him since.

[@emotionalintelligence776]

Not sure what happened in your case. However, I followed most of your vid before switching to dosdude instructions after your future self dropped in, lol. My goal was simple, disable the dGPU and install Catalina. After about an hour of multitasking, I was able to install the patched OS and have been enjoying my retired 2011 MBP which feels like a true MBP once again. Thank you immensely. I've waited over a year to finally do this. BTW looking at your procedure it's one step different from what I did. As I intended to install the Catalina OS, I made an OS bootloader for it. After using S mode initially for the prefs you described, that was the only time I needed it. I disabled csrutil from the Recovery via the USB bootloader as I did get the enabled SIP error. Since I was not sure why it wasn't disabled I rebooted into the USB bootloader and ran the terminal command from that. Once I rebooted everything was green and I ran the program without further issue.

[@crashbandicoot4everr]

When you delete or modify kexts, you have to rebuild the kernel/kext cache after doing so. To do that, you have to run this command in Terminal: sudo kextcache -i /Volumes/YourPartitionName Glad you got it working! :)

[@MichaelMJD]

Thanks for the info!

[@abyssstrider2547]

For a second there I thought you had mispelled text

[@JohnHuxleySavage]

Incredible! My 2011 Mac Book Pro's third (or maybe 4th?) logic board just failed, and I was so close to giving up entirely on it, but the nvram command solution has worked.

[@josepintor8986]

This did it for me! I have been working on a mid 2010 Mac for days! It is now installing! THANK YOU!

[@TheAdagioSostenutto]

Thanks for your video. The method worked perfectly on my MacBook Pro late 2011. The gDPU disabled also worked fine. Thanks again.

[@mustafatekbas1132]

Great video man. I followed the steps on the website and 100% works. I had no issues like you had. Thanks 🙂

[@MichaelMJD]

Awesome!

[@dexteroreilly]

Hey @Michael MJD - you weren’t booting into Recovery mode which is why CSRUTIL didn’t work. You need to hold down the Command-R keys and hold them during boot. It’ll launch the recovery image and give you access to Terminal.

[@dexteroreilly]

@@rhuephus single user mode isn’t required to disable CSRUTIL. You just need access to the Terminal program provided by the recovery partition.

[@RetroReviewYT]

I’d recommend dosdude1’s custom firmware for the gMux chip when it releases for a permanent fix. He’ll be selling a flasher that end users can use to flash the CFW for the IC chip which won’t require any modifications to use.

[@inwerp]

Fingers crossed. However flasher will not be cheap and it makes sense only for repair services. I also tried to read chips firmware but so far i had no luck.

[@notvitalkanev]

9:56 maybe there are some ATI* files left in Extensions folder?

[@MarcCardwell]

Hmm. My late 2011 MBP just died. Boots into safe, but not recovery or internet recovery. I just saw a CL post selling the same model and dude said he disabled the AMD chip, I googled it and here I am. I used my Mac with an Apple Cinema Display, but if this works, cool. Thanks for posting this vid!

[@deathbringer2000]

Yo @MichaelMJD, If you still have this machine, I figured out a method of getting it to boot without moving kexts or anything. There's am NVRAM variable called GfxMode that sets what GPU to use on boot. If you set it to 4, it powers down the dedicated graphics and exclusively uses the integrated graphics. This even sticks between updates, and even entire OS reinstalls.

[@mnisiide]

Hi… could you point me to where can I get more details on that solution?

[@AaronWelchMusic]

Hi Mike, I got the disabler to run! You need to do the single user code, terminal the shorter bit, then reboot by typing reboot into the terminal after, and it'll reboot very quickly, take a while to boot up, maybe do a few cycles, and when I got on, the intergraty protection was disabled and it ran!

[@pswitch9553]

Hi there, Michaelsoft Binbows

[@MCAlexisYT]

🅱️indows

[@Adamlol642]

@@MCAlexisYT Michaelsoft is a real company

[@MCAlexisYT]

Ada.mp4 bruh That’s fake.

[@Adamlol642]

@@MCAlexisYT Nope lol

[@MCAlexisYT]

@@Adamlol642 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LOL YOU CAN'T CONVINCE ME ENOUGH YOU TROLL

[@KennethPlaysOfficial]

i have a 2012 macbook that will crash once switching to the nvidia gpu. will this method work for me?

[@osnu1008]

My friend, there's a resistor that powers the dedicated GPU, the Resistor is known as R9811, Run the patch provided by REALMACMODS and then boot the machine in safe boot then shut down the machine, REMOVE THE Resistor.... Cross your figers that once you press the power button once you do that. the display turns on... if it does.... Boot from OSX Utilities and enable a Firmware password... so EFI VARS wont be re- written.... this is the only real BYPASS method for longevity and LESS POWER CONSUMPTION BECAUSE THE ATI RADEON WILL BE OFF.... if you need help. Message me.

[@pedrogomeszz]

I bought a logic board on ebay without that resistor and its fully working, the only thing that doesn't work is brightness control, i installed a program Brightness Slider and it works on High Sierra

[@nikfrompines]

😭 Thank You!!!!!!!!!!!!!!!!! Since last month, I had to use the backup laptop.

[@metacorp]

Hello Michael, Thanks for your video, I have a problem, my keyboard is in spanish, have the letter "Ñ". In the moment of type the code I can´t write this sign ":" (two points) and I can´t type "P" letter. Any Idea that can help me? thanks so much.

[@randomstuffchannel4327]

If you check Dosdudes website he has an email that you can get in touch with him at and see if there’s something that he can maybe help with. That’s just a thought though.

[@treyquattro]

why the hell didn't Apple make this information available instead of just throwing up their hands? It could have saved so many people with working 2011 MBPs that have a burned-out junk AMD GPU! But I guess that wouldn't have sucked out thousands of dollars from users' wallets for new computers. Thanks for this video, gonna try it (although a bit skeptical about downloading something from the web & running it)

[@treyquattro]

Also: subbed just because of this!

[@joshuaa3075]

I asked apple support for an approved apple solution to turn off the bad gpu on the apple hardware and they refused saying it was “vintage” equipment

[@treyquattro]

@@joshuaa3075 I pretty much got the same from the "geniuses"

[@joshuaa3075]

Trey Quattro it was a wakeup call for my wife. She did not trust Apple after that.

[@Dmacxxx77]

Because they're in it for the $$$

[@marccheese9023]

Hi Michael! Thanks for this. I manage to get my 2011 macbook to turn on after giving up for over a year!! I followed the Dosdude1's Guide's and worked perfectly. I tried to reboot the machine and it went through 4 rounds or rebooting before booting correctly again. Do you have any idea on why is that happening? Thank you so much for your help Marco

[@jiaozi0323]

Big thanks! You saved my macbook!

[@jordesign]

3:47 could the typo have been the issue? Extentions v. Extensions

[@Angelo-bh7id]

after after running the command: csrutil disable in terminal while in recovery mode, I rebooted the system using reboot command in terminal. but it took around 20minutes for the loading bar to fill then froze. then after a little while i thought that maybe i need to check csrutil just to make sure so i turn it off and on again then hold command+R to went back to recovery mode then run the command: csrutil status and its showing that its disabled. this time i tried reboot it using the tab on the top left then clicked reboot. but to no avail, its still got stuck while rebooting. pls help, whats the next step i should try?

[@happy-landings]

Any idea how to accomplish this on a mac mini mid 2011 with AMD GPU?

[@ernestomightygoodridge2630]

hey Michael it work just like show removed hard drive, deleted AMD extension file and restart computer the bottom bar color will be white that is OK go back restart hold S and comm start up computer type command from Dude1 reboot apply the Patcher GPU disabler you see two green check mark. Michael you safe some money brother

[@mhzgwnsntip3435]

Nice video. What if, a month from now, you buy a new ssd and you want to install some other macOS version from scratch. Will it let you or what steps will you have to follow to do that with the dGPU bypassed?

[@MichaelMJD]

I just uploaded a video installing an SSD in this machine, haha. I had to run these commands again because it was a clean install.

[@RovakX]

@@MichaelMJD Can you link me to this video? I am in this situation. I have a macbook 2011 which I've been using for years in integrated graphics mode only. The GPU died shortly after warranty.... Now the HDD is dead and I'm trying to get my machine back, I've got a working drive laying around, but no clue how to install a new OS on it without triggering the integrated GPU... :p Many thanks. I'm not gonna lie, I will be impressed if you respond to this comment.

[@MichaelMJD]

@@RovakX Here is the link to that video: kzbin.info/www/bejne/gXqvaHawgbuqhMk Hope you can get it working!

[@GBlastMan]

well i never used MacOS and im not sure how the SIP disableing thing actually works on different partitions of the same disk so its a wild guess but maybe since you have too many partitions it may happend 1 of 2 things. One is that maybe you are disableling it on one partition but not in like the whole disk as a whole and its still registering it as "enabled" And two and i doubt this is an actual thing that could happend, maybe becuase there are more than a single partition and the others have SIP enabled they are re-enableing SIP on the one you are trying to disable, so maybe if you disable it on all partitions it will then say its disabled? it could be but i highly doubt it. Then again i never used MacOS so its just a wild guess anyway but could worth giving a shot and trying to disable it on every single partition or maybe try to disable it once you have the new SSD and just instal El Capitan on a single partition.

[@denbagus3029]

Hi can you give detail instructions before removed AMD driver

[@jenkah]

When my Mac goes to sleeping mode it does not awake anymore, after completing successfully all this process. Do you have any idea of what’s going on?

[@closencounter1000]

I always just go into recovery to do it not into Command single user recovery.

[@diegocalvo9608]

Someone is selling me an A1278 2011 MacBook Pro with this problem. The person who is selling it to me indicates that it gives no video signal at all, meaning the screen remains black the whole time. Is it an indication of a worse damage or this could also fix it?

[@FretsNirvana]

Hi, I used this method to disable the amd gpu. Now however my computer cpu will not go into sleep mode. When it attempts to do this it shuts down and I have to restart the computer. Can you give an insight on this? Is it a function of using this method? Thanks

[@avolaruruguay4625]

Hi Michel is there any posibility that after bypass the amd the wifi card is no longer regonizable because I have this problem with my 2011 17" macbook pro and I also try with another wifi card from a 2011 15" macbook pro and both of them only work the bluetooth but the wifi card is no longer regonized by the OS ,and for sure both of the wifi cards are working , also try to reset smc and pram/nram and nothing I try all the combinations possible and nothing , if you have any ideas it would be very helpfull thanks

[@lemler3337]

9:17 i had no idea mac had tty's

[@filipstefanovski2077]

Hey show us that clamshell

[@MichaelMJD]

I've actually done a few videos on it a couple of years ago : )

[@wickstorm_records]

You should ONLY delete amdradeonx3000. Then brightness and sleep works.

[@hecriveras]

Muchas gracias. :D

[@DetikZainal]

Delete from sys/lib/extensions?? Or comand from terminal?

[@geneross1244]

4:27 Do you guys have a solution how to fix that cause everytime i fix macbooks the apple logo is stuck even with the lid close

[@bananaorangeguy5277]

YES!! I am glad my mbp is booting, thank you thank you, but when I restart the machine i need to do all the steps again, is there a way or new solution for this?

[@nawee6801]

Hello Does the process of BYPASSING normally cause some issues with the Thunderbolt port? My UPGRADED MBP early 2011 running High Sierra can't detect my external monitor using a thunderbolt to HDMI adapter. Thank you very much

[@narutobroken]

Yes, only the AMD GPU can make external monitors work, if you disable it, you will no longer be able to use an external monitor

[@Molai007]

is this permanent or temporary

[@jmitra95]

What if I have "disk is write locked" ? what do I do if I see that while in single user mode?

[@AliHamza-pi4di]

Deleting AMD gpu files in Library is necessary?

[@matthodgson300]

I cannot for the life of me disable csrutil in terminal, safe mode or recovery mode. It says the command is not found. The computer does not know the command. I am running MacOS Sierra 10.12.6 All i need to do is 'csrutil disable' so operations can be permitted. I've been at it for 3 days now. Any help is greatly appricieated👍🏻

[@somerled5513]

Same. Did you find any solution?

[@ikea_man]

I stil, use this xD

[@screwb1882]

These systems are horrifically undercooled. The chips failing being a common issue does not at all surprise me. Just poor design on Apple's part.

[@michaeljones3687]

Since the drive has multiple partitions, it may be causing a possible conflict with disabling the SIP?

[@SenileOtaku]

That was my thought. It might be disabling it on a different system partition/folder than it's booting from.

[@atarixle]

I'd like to know if this helped or not ... I mean just in case I ever buy a Mac again (which I promised to my Girlfriend I don't since I got me like 15 classic Mac Laptops the last two years)@@SenileOtaku

[@markconger8049]

I contacted Rossmann Group in New York about repairing this at the board level and their response was it isn’t possible to just replace the GPU. They ahd tried it but machines were dying again within days. They pointed me to dosdude1’s method of flashing the firmware to permanently disable the GPU and enable Intel HD graphics. COVID has stepped on that project if you want to mail in the computer for them to fix. Doing it myself isn’t possible at this time. So, for now we are going to replace the 2011 Macbook with a different model that is newer and get by for now while we transition AWAY from Apple altogether because enough is enough. Apple is no longer the same company it was ten years ago. I’m done.

[@Ryan_Revier]

You could upgrade the macos in it since Catalina is on older macos, but OCLP Big Sur could do fine in it..👍🏻👍🏻

[@dosdude1]

Huh, I'm not sure why the tool is still detecting that SIP is enabled, after disabling it in Recovery Mode... Try running "csrutil status" in Terminal and see what the output says. If that reports it's disabled, there may be an issue with the tool that I need to fix.

[@MichaelMJD]

Hey Collin! I have a follow-up video in the works where I was able to get your tool to work. As some have pointed out, I think it might have something to do with the multiple OS partitions that I had installed on that HDD. After I did a clean install of macOS on a new drive it worked perfectly.

[@andusensei]

I'd try doing a completely fresh install with a single partition.

[@BrianEller-begrafx]

One question: I'd heard from other sources that when the AMD GPU is disabled (by whatever method) that you can no longer use an external monitor. Can you confirm/deny this, when using the method you've used?

[@Haroflowks]

yes, that's right!

[@TRENX_]

I think it’s not disabling the sip due to the multiple partitions? Not too sure.

[@imprezapeej]

Hi, I tried this and whilst i can get the :NVRAM ********* etc entered and restart the machine, It boots halfway into OS and then fails and shuts off again..? Any pointers on if i'm doing something wrong...? (late 2011 pro 15")

[@albaniaoffroadadventures8118]

I have the same problem bro, my MB Pro 17 early 2011 is one year now doing this. I'm not sure if we have to disable the GPU or not. did you fixed your? thanks and if yes please share the solution

[@IngwiePhoenix]

Here are a few things I noticed: - You removed the kext files - but did NOT rebuild the kext cache. - In your "mv" command, you typed "/DisabledExtensions" - but, you didn't add a slash :) Should've been something like $ mv AMD*.kext /DisabledExtensions/ - Are you sure that you _really_ disabled System Integrity? :) Perform as root, via recovery. In Recovery+Single User mode, you should be root, but type: "echo $USER" to see if you are, or are not root. - Also - for safety, make sure that you boot into the proper recovery drive, so that it will also disable system integrity on the proper partition. If you are using two different components, OS and recovery, it might fail. Use "diskutil list" to check which drives are currently mounted. Also, if you enabled system integrity with this HDD on a different mac, disable it first, then re-enable it, in order to get a fresh startover. But other than that, nice video!

[@XGempler]

When you issued the CSRUTIL DISABLE command in single user mode (black/white text screen) it clearly stated "THIS TOOL NEEDS TO BE EXECUTED FROM THE RECOVERY OS". instead of swaping drives like yo udid you could have restarted in recovery mode (Control+R) then selected Tools-Terminal Mode and then typed CSRUTIL DISABLE... then restart in single user mode again to issue your move command.

[@Rocknsoulmusic]

Fucking nice the dos dudes shit worked well ..A year ago. I Removed the amd kext files and the screen had that blueish color and all was some what well then a month ago the he screen got worse ....So this right here is the better fix cause it's running on Intel card not amd

[@amdintelxsniperx]

just to add to this video in case anyone stops by . we all know the intel hd gpu is kinda puny but there is a way to increase its performance . if you have a 2.2 or 2.4 you can install 1866 mhm ddr3l and the chipset will happily run them at full speed you can also use 1600 the ogpu will use the system ram as gpu memory up to 512 mb the faster ram will help a lot in many tasks

[@AnastasiosAPapanastasiou]

I have the same issue (as most with MBP 2009-2012). The only thing I do and seems to be working for me is I boot in single user mode (CMD+S) and I enter the command: sudo nvram fa4ce28d-b62f-4c99-9cc3-6815686e30f9:gpu-power-prefs=%01%00%00%00 Everything runs smoothly but if you restart the machine you need to do all the steps again. So now I’m doing it al least day after day

[@bananaorangeguy5277]

this happen to me, I am glad my mbp is booting, but when I restart the machine i need to do all the steps again, is there new solution?

[@rclizan]

hi! i tried dosdude1's instructions but I ended up with a mbp that shuts down when the progress bar reaches halfway. :( I hope you can help me here. :)

[@GhostBeatsTV]

Good luck I'm currently in the same situation

[@dylanlindsay1993]

hey mjdi just boUGHT A 2011 MBP WITH FAILED GPU ON PURPOSE!!...... n i am doing this mod right now! n so far it worked! the laptop was 40$ and my 2013 mbp died so i did this rather than fixing it... update: it took two hours but i did get the bypass to work! i had to stick the ssd in another mac just like you did in the video but in the end everything worked out! FYI if you use dosdude1s catalina patcher to upgrade from 10.13 high sierra to 10.15 catalina the brightness control will work again without having to do that hardware mod!

[@Mateo-ko9kx]

Afterwards, you probably noticed the lack of brightness adjustment capability. Use Shady app for that purpose.

[@MrOrthopedia]

Sometimes my late 2011 MacBook Pro boots into safemode. I just had the logic board and battery replaced. Help.

[@julianhcuestas]

@MichaelMJD How can you delete kext files? When I try, macOS says that those files are necessary for mac and don't let erase them

[@inzar86]

but after that , we can not connect to external display. is there any tutorial for that? after disable discrete GPU.

[@etsakodeejaystarboyavevo]

I was trying to make an upgrade and since then my Mac only make the Mac sound and show logo then get stuck there could this be the solution ?

[@drobinson772]

I can't believe this worked! I've tried everything and this was easy. Thank you. Thank you. Thank you.

[@TrialMacameau]

Mike, you have multiple partitions hence you have 2 OSx's hence you have to full reinstall the system

[@MichaelMJD]

Going to try this out in a future video!

[@inzar86]

thanks for the tutorial, its very helpfull for me, but, after disabling my AMD GPU, I cannot use external monitor. air display cannot turn on and thunderbold connector can not use to display my screen to external monitor. I also buy USB to HDMI (Hagibis) and done installing driver, it still cannot showing mya screen to external monitor. anyone can help me?

[@retroclassicgameplay4655]

thunderbolt connector need to access AMD gpu, if AMD gpu not repair you cannot use externalscreen, try using chromecast or miracast

[@TechHug]

Just say "discrete GPU" in the future lol

[@SutboxSutty]

Thousand Thank you follow instruction working just fine 1st 2nd 3rd reboot no probbs Thanks

[@rajeevshrestha5177]

My filevault turn on so I can’t go to recovery mode with command s, what should I do?

[@alephcake]

I love the tech stuff that you're doing on this channel! Keep up the good work :)

[@MichaelMJD]

Thanks, will do!

[@andrewdupuis1151]

i just got 2011 MacBook Pro earlier today my first ever mac laptop

[@It3pvpytXP]

I am watching this on my 15" Early 2011 MacBook Pro

[@ghunterplays1637]

It is a wayback option for this ? It didn't worked but it deleted all the drivers

[@afarewelltokings]

I have never heard you get mad in a video until today and frankly I’m impressed

[@plantastica4622]

Thanks for your wonderful video. I followed your advice but when I get to recovery mode there is no terminal tab - now what?

[@LionAndroid]

In recovery at the top look for utilities. Terminal is located there

[@yedlam7991]

you are missing steps, how did you go from there to recovery mode ? its so annoying

[@too1979]

Run sbin /mount -uw Just move the amdx3000.kext to another folder.

[@NAMAHE]

although your videos helped me get my macbook pro 2011 back to life, i nowadays listen to your videos when i go to sleep. your voice is SO calming. thank you!

[@DetikZainal]

Nathalie Hermansson 🤣🤣🤣 lol

[@hamzayaz]

Hey nice guy. Thanks a lot for this guide. It worked on my 2011 Macbook but intel 3000 GPU is giving terrible pseudo colors. Can I email you screen dump? What is your email?

[@sb-old-channel]

Thank you so much! After almost a year I see the desktop again!

[@jmitra95]

Do you need to run sudo when you do the NVRAM command? or no?

[@encinobalboa]

Somebody on YT successfully baked the entire logic board from his Mid 2011 MBP 15. It was a similar bake process as used on the AMD 6970M GPU in Mid 2011 iMac 17 inchers. The youtuber set temp at 370 and baked for 7 minutes. 6970M bake is at 390F for 10 minutes.

[@encinobalboa]

To follow up on this, I just picked up a MBP 17 with no chime and black screen. Intel GPU was not initializing. Took the logic board out and applied heat gun to the top of chip. It's working again. How long it works is anyone's guess but it is not a brick anymore.

[@13leafs]

@@encinobalboa It's only temporary. Been down that road.

[@Buzzhumma]

@@encinobalboa i gonna try on mine . the fan spin and stops on off on off on off. Did yours spin

[@encinobalboa]

@@Buzzhumma Look for a boot sequence chart. That will give clue where to look. Fan sounds like a low level failure which is not so easy as GPU bake. Maybe some heat gun on CPU or a MB controller might bring it back. Worth a last gasp as 2011 is not worth paying for tech fix.

[@ZardozBeats]

Thanks for the video! Would you also know how to re-enable the GPU? (for example when a new motherboard is placed)

[@enomishtheo5153]

Thank you very much you save me and my poor Laptop from spending a lot of money! I was trying The comands trick and it was working for a while but after a short period of time i was on Grey screen again... But The software solution you have gave us Works like a charm!!! Thank you thank you again!!!

[@pprimaxxx]

I am using 10.13.6 (17G12034). MacBookPro 15 late 2011. I did everything according to the instructions from the program website Everything turned out as the developer promised. The program worked until the final. Removed AMD drivers, made changes to the boot file. After reboot, everything works fine. MacBook does not heat up. BUT!!! The brightness adjustment does not work! Going to sleep does not work! Who knows how to solve?

[@FeelingShred]

Wow this would be useful for my 2009 laptop which has AMD Radeon GPU... How do I know it my core2duo processor has a built-in graphics chip in it too?

[@700gsteak]

Is this a late 2011 mac or early 2011 mac that you have?

[@WorldvsTruth]

Looks like the answer - at least worth a shot - to my many hours, days, even weeks of frustration. Unfortunately, so far after booting into/with "single user mode", no typing is permitted. That is, keyboard doesn't function. Any suggestions? Anybody? Please and thank you.

[@gavinbrophy8402]

Hi Michael Question What can I do when I get the following message when I tried to delete the *.Kext files?:) “AMD2400Controller.kext” can’t be modified or deleted because it’s required by OS X. Question? is there a way around this? Thanks for any anticipated help, much appreciated.

[@TheTechnoGuy18]

I didn't even know that Intel CPU'S had the GPU integrated into them!!! That's interesting... ( BTW what is "Reovery Mode" 13:47????????)

[@MichaelMJD]

You can get to recovery mode by pressing Cmd + R on bootup. It's filled with tools that you can use to diagnose and reinstall OS X

[@TheTechnoGuy18]

@@MichaelMJD I was talking about the spelling mistake at 13:48, but its still interesting that Apple's Recovery Mode has more features than Microsoft!

[@MichaelMJD]

Lol I didn’t notice that 😂

[@tbg9708]

It partially works on imac mid 2011. For me: my screen is back up but not running properly. I had to copy all AMD KEXT files to another folder then bring back to extension folder once monitor was running because cmmd+r froze at the boot screen. It seems to be requesting an update but I cannot find an update for the graphic card anywhere even at the AMD site. I cannot boot with command+r into recovery because it will repeatedly freeze before apple load bar loads. This is odd this imac has been running flawless for 8 years then out of the blue it went psycho. I cannot follow dosdudes instructions because again some of the keyboard functions do not work properly at startup.

[@gershonvillamor4490]

Is this late Macbook Pro 2011 15 inches i7 a faulty device? Because I'm about to buy this the same used Macbook Pro, please give me your response

[@kannainjeti8611]

I had mid 2010 MacBook Pro which is having faulty integrated graphics causing overheating and flickering...what to do with this please help me out

[@oceanjansly971]

how can i reverse the process to have the problem again

[@Danny51ngh]

Hi, really enjoyed you video and the work around worked fit me. But the only issue is all the graphics are absolutely shocking on the intel gpu. Any way of turning the AMD back on?

[@ttomovcik]

Reflow won't work on 2011 MBPs

[@treyquattro]

needs a new GPU which you can't get anymore; there are old boards out there but it's a crapshoot

[@WhatsAbout]

Hey man ,i have just tried your steps and i went to terminal from recovery mode and disable as you did .Get 2 green checks :)

[@feboober]

There is a better way of doing this, as after software updates or nvram reset etc then this method doesn't work. gmux IC reprogramming. so that the gmux ic no longer switches gnu's. dosdude1 has documentation on how this is possible, I've already ordered the Lattice FPGA programmer (HW-USBN-2A). You only have to solder a couple of wires on where there used to be a programming port on prototype MacBooks, flash the updated program, and done. Also if you want to fix sleep and wake, he also sells an IC you can solder in, called DyingLight

[@sleepwalker6825]

Will this DosDude program work on a macbook pro mid 2010 with the Nvidia graphics kernel panic issues ?