How To Polish Chrome & Aluminum & Keep the Road Grime Off!

Make your Wheels and Rims Shine like nobody's business.
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
Hello Everyone, SWEET SCOOTS here with cool, trick, and affordable ways to do things for the DIYER'S OF THE UNIVERSE!
SEE HOW Ceramic Coat: • The ULTIMATE Motorcycl...
_____________________________________________________________
TOOLS:
Mothers amzn.to/2C18A9Z
"SPECIAL" Rim Protectant amzn.to/2DVu8ZU
Polish Wadding amzn.to/2B4dMJz
12" Drill Bit Extension amzn.to/2kk5BVz
Drill Extension Set amzn.to/2icfIHG
Brass Brush Kit amzn.to/2AoWoBH
Aluminum Polishing Kit amzn.to/2zppltV
Dewalt Hand Drill amzn.to/2AXc2ls
Micro-Fiber Towels amzn.to/2yTPhgR
Motorcycle Lift amzn.to/2CDKWAb
Best Gloves amzn.to/2B8kLBh
Buffing Ball amzn.to/2CMWsKH
Polishing Cones amzn.to/2EPeAnM
=============================================
SEE OUR MAIN KZbin CHANNEL
/ sweetprojectcars
****The small compensation we receive from these amazon links helps to keep our channel available to you for FREE****
****Disclaimer****
Due to factors beyond the control of SWEET SCOOTS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET SCOOTS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET SCOOTS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET SCOOTS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET SCOOTS.
Disclaimer:
Due to factors beyond the control of SWEET SCOOTS, we cannot guarantee against the improper use or unauthorized modifications of this information. SWEET SCOOTS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET SCOOTS recommends safe practices when working with tools seen or implied in our video and written content. SWEET SCOOTS may be compensated for sharing links. Due to factors beyond the control of SWEET SCOOTS, no information contained on this KZbin channel, Facebook page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET SCOOTS.

[@robertschuette7939]

Thank you for the great video tutorial! I followed your steps on my Mastiff with terrific results. Only thing I changed -- I cut a piece of old garden hose and slid it over the drill extension bit to make it easier to handle and less likely to grab my glove.

[@SweetScoots]

Awesome Robert Glad we could help and thanks for the garden hose tip... ride safe mad mike

[@fastabyss]

YES!!!!!! loved the sweetprojectcar channel, cannot wait to see what you are gonna do now. I do all the work on my bike and Im all self taught, been riding for three years cant wait to see what sweet ass tricks you got for hogs! Your the mvp of life man, seriously much appreciated! Alot of us who grew up with dads that didnt teach us shit like this really appreciate it.

[@SweetScoots]

Anthony Bolin glad we can help my friend :) many great videos coming

[@michaelhovey8007]

Hi. I am a new subscriber. Your channel is the best diy channel of its type. Most channels are just trying to flog a product or feed the content providers ego (look at me!). Your practical, and achievable advice is delivered efficiently and is entertaining. Your past videos on both channels are a encyclopedia of helpful how-to. Keep up the great work!

[@SweetScoots]

Michael Hovey thank you very much, my friend, we truly appreciate that...and we thank you for your kind words :)

[@rexvollans4770]

Tks for taking the time and creating these videos. Love both sites. Can the same polish process be used on all parts including exhaust and mufflers?? Or will this be a problem for Rim Job wax?

[@claudesmoot1880]

Wow that's awesome! Love all of your videos. Keep up the great work!

[@SweetScoots]

Claude Smoot thank you very much my goooood friend :)

[@neverrquitt760]

AWESOME CHANNEL great job guys I love it!!!!

[@georgegriffith7263]

After you said look in the description i found everything the polish is called Rim Job LOL

[@SweetScoots]

Glad you found everything george! Thanks again for the view, have a stupendous week. mad Mike sweet scoots

[@aronbechiom565]

Got yourself a new subscriber... In the process of "deep cleaning" my newest aquisition..an 07 Sportster 1200L. Considering the condition of the fork tubes and wheels.. I don't think this thing has seen polish over the course of 49k miles!!!... lol Thanks for these demo videos. Priceless !

[@SweetScoots]

Awesome! Thank you for watching and sharing Aron! Welcome Aboard, all the best with your new project my friend. mad Mike Sweet Scoots

[@Iverness-l8h]

Man every video you make kicks ass! I appreciate them...

[@SweetScoots]

Aaron thanks so much, we try hard to do videos that will help all our fellow bikers :)

[@dj0men666]

Cool new channel - i had a honda fury but sold it a while back. deffo get another similar in future. Like the look of yours. Hope we get to see it in full and hear you fire it up. Infact you could make an intro like the other channel with your bike. As per usual the protectant product you use seems to be usa only or pay a huge price so searching uk amazon for rim job pulled up some very interesting search results. Wait till i now start getting remarketing emails about rim jobs. The wife will no doubt see an email and start the interrogation lol take it easy man. 2 channels to keep me intrigued now. 😄👍 one of my fave channels is sweet project cars.

[@SweetScoots]

Damian thank you and as soon as it warms up here a bit we will take your advice and do that intro :) and don't let here interrogate you LOL

[@flysuperman3660]

Excited for your new channel!

[@SweetScoots]

Mr. Bill Folds thank you very much and we have some great stuff coming down the pipe:)

[@JJMLJ]

Love the new channel!! Excited to see a vid on dirt bike plastic (soft plastic) refurbishing.... Love your work man!! Thanks.

[@SweetScoots]

thank you john we have some really good stuff coming

[@danielmiller7693]

Man this is great stuff. Glad I found your channel. Thanks

[@SweetScoots]

Glad you enjoy it! Thank you for watching and for the comment, have a fantastic week my friend. mad Mike Sweet Scoots

[@diarmuidoc9427]

Subscribed. Looking forward to these bike vids. 👍

[@exodus3155]

Now i'm excited i did this yesterday to my bike before watching the video doing what you've shown on the other channel. sweeeeet

[@SweetScoots]

Shane T thats awesome ...we are actually launching a new video today on some other cool methods to use your ceramic coating :)

[@Junior-fd8ux]

Wow this is great. Also thank you for the tip about using the same towels in the same areas with same chemical/residue left behind. This has bothered me for years and now i have way to many towels lol only using them a few times and buying new ones. Time to make a color coating system

[@SweetScoots]

Glad it was helpful! Thank you for watching and sharing my friend. Hope you have a great day. mad Mike Sweet Scoots

[@thejasonkellett]

Simply Awesome, and informative!!!!

[@SweetScoots]

TYLER you know we appreciate that :)

[@k3lvd]

I was hoping for this .....thank you I love your channel

[@SweetScoots]

k3lvd thank you very much and we have some great stuff coming down the pipe:)

[@timrichardson6670]

Beautiful. Thank you brother.

[@SweetScoots]

My pleasure and Thanks my friend thanks and ride safe Mad Mike

[@sweatinthedetails375]

Love love love your videos thank you very much but now I'm a little confused should I use this stuff on a polished aluminum bed or should I use ceramic coating? Which would last longer and do a better job to keep it from oxidizing?

[@SweetScoots]

I would polish the bed with mothers then use the ceramic coating it is the best of the best

[@SweetProjectCars]

Awesome work :)

[@SweetScoots]

We will do that for you benchman we do a couple video we need to do before that but we will get it

[@halseyballistic]

Awesome..... So I just subscribed today day, April 20 the day of the 420 holiday and I'm the 420th subscriber. Go figure.

[@SweetScoots]

Halsey Marcoux glad to have you, my friend, I guess 420 is your number on the next lottery. LOL

[@ZO6JOE]

AMAZING VIDEO THANK YOU! I’ve got a Big Dog K9. How do you clean your cylinder heads? And can you clean and reuse your drill polishers? Is so what do you use.

[@SweetScoots]

We use the drill polisher bits until there's nothing left to them then we just replace them as they are fairly inexpensive. As far as cleaning cylinder heads and jugs, we use this amzn.to/3msFOs3 to get in between the fins and the outside edges of the fins. Of course you won't want to use these if you have chrome. Then we use this amzn.to/3uzQ2Ip to buff it to a shine. Thank you for watching and asking, have a great weekend. mad Mike the hammer Sweet Scoots

[@NormKohn]

Great job!

[@SweetScoots]

Norman Kohn thank you very much my friend :)

[@hopidushibosa]

Great video's my friend...all I did was watching your video's...question would this work on my Yamaha Royal Star aluminum wheels? I know they won't shine like chrome, but at least a little bit better the normal? Keep the video's coming my friend. Great Job..!!

[@SweetScoots]

terence this process will make them Royal Star Wheels look the best they possibly can :) thanks Mike

[@The1s2a3r]

Saaweet love the vids. Ill sure give it try on my 09 fatbob wheels

[@SweetScoots]

steve you will love the results my friend..thanks mike

[@ScotWalt858]

Sweet!

[@michaelhovey8007]

I looked up a couple of videos on both sites for aluminum rims that are oxidized. I stored my bike out of the rain this winter (west coast means little snow) but foolishly left the bike cover on. When i peeled it off this spring, the rims had really oxidized. The bike has big wheel coverings and double oversize brake disks. Doesn't leave alot of room for elbow grease. Should i take the wheels of to refinish the rims or is there another way?

[@SweetScoots]

Michael Hovey we will be launching a video on this very soon, also can you send a pic or two of the oxidization so we can see it up personal...ride safe :) send to [e-mail]

[@thetraindriver01]

Nice effort 👍👍👍👍

[@SweetScoots]

thetraindriver01 thank you my fellow biker :) glad to have you here :)

[@keithbenard652]

I have a question about aerospace 303 and motorcycle tires, I know how well it works on car/truck tires but can it be used on street bike tires ? because street bike tire's don't last nearly as long as a car tire this would be a big plus if you could use 303. so long as your not going to slide all over the place. and feed back would be great. thanks.

[@SweetScoots]

keith benard we have placed the 303 on all our bike tires with no adverse effects to traction as but we always say if someone is worried about a process we share then they should always pass on it.

[@IanEdRobertsonLive]

Amazing 🔥🔥🔥

[@SweetScoots]

Thank you very much! We appreciate the view and comment, have a great week. mad Mike

[@camm9397]

Hi Mate ...just awesome..but what product exac tly is it of there range, or are they all the same? thank you in advance.

[@SweetScoots]

Here's the entire tools list my friend: TOOLS: Mothers amzn.to/2C18A9Z "SPECIAL" Rim Protectant amzn.to/2DVu8ZU Polish Wadding amzn.to/2B4dMJz 12" Drill Bit Extension amzn.to/2kk5BVz Drill Extension Set amzn.to/2icfIHG Brass Brush Kit amzn.to/2AoWoBH Aluminum Polishing Kit amzn.to/2zppltV Dewalt Hand Drill amzn.to/2AXc2ls Micro-Fiber Towels amzn.to/2yTPhgR Motorcycle Lift amzn.to/2CDKWAb Best Gloves amzn.to/2B8kLBh Buffing Ball amzn.to/2CMWsKH Polishing Cones amzn.to/2EPeAnM Thanks for watching, have a sweeeet day my friend. mad Mike

[@roseannfugman7565]

Thanks for your Videos. I am a detailer but working on my own bikes are my passion. We have a 2003 Road King that the chrome is slightly pitted from prior owner poor storage conditions. What can you do to correct pitting if anything? Love your info and that you list the tools you used.

[@SweetScoots]

ROSEANN FUGMAN glad to have you here with us ...and detailing bikes is the most fun, I think anywho...I have some chrome pitting on one of my bikes as well and the only cure it to have it re-chromed or replace it....I know UGH !!! lol

[@FasterBastard1]

Old comment but, in some cases you can sand with 600-800 grit to remove deeper imperfections. Any finer grit is a waste of time. It will polish out beautifully though. Works especially well on aluminum. Don’t sand plated parts 👍

[@meanf1502]

I like how you use never dull an mothers together never though of that great channel

[@SweetScoots]

It works like a beast my friend! Thanks for being here with us and for the comment, have a fantastic week. mad Mike

[@gregkeller80]

Did I miss the disclaimer from Julio? Great job! Thanks for the video…nice hair cut btw!!!

[@SweetScoots]

LOL, you missed it because Hoolio was on one of his many vacations that week Greg :) Thanks for watching and commenting, have a fantastic day my friend. mad Mike Sweet Scoots p.s. I like my hair cut too, looks like we have the same one :)

[@Hectoriousz]

Nice!!!👍🏼

[@SweetScoots]

thank you hector we have some great stuff coming

[@shanespencer5588]

Whats the name of the super dooper protection stuff that wont allow dust n grime stick to wheels? Mothers is good have you tried Californian purple polish its good to brother brown

[@SweetScoots]

We use this Shane goo.gl/z9TrgR It's super dooper :) Thanks for watching and asking, have a great day my friend. mad Mike Sweet Scoots

[@alvarortega2]

Great new channel to follow too!

[@SweetScoots]

Alvar thank you we have some great stuff coming :)

[@lg8471]

Is that wadding the NEVER DULL wad.. When you apply the MOTHERS..?? What is the Special Protectant you use..?? Do you ever get into the fins & how do you do it..?? Where in the world do I get an assortment of smaller buffing & polishing cones and balls..?? I have been on internet... to Harbor Frieght... O'Reilly Auto.. Body parts store... Two micro dremal wheels, balls & cones.... I got a kit from Eastwood with buffing/polishing sticks.... Not very good kit... ok I suppose, but Where do you get those extensions.... Yes, some of Mothers Balls & Cones come with an extension... but none as long as a couple I seen you use... Where do you get extra cones Brother... ...... Now... I've spent 20+ hours on my 2003 BigDog Chopper..... It still does Not look like your AFTER results...... I'm 63 and I like to go Fast still, lol.... Love mah Toys..... Love yer Scooter BTW...... My fingers are down to the nubs.... I'm an Artist with OCD..... I can polish the crap out of these damn aluminum wheels (show chrome is what I want) If I would take them off.... then reinstall... I know that I don't have to do that..... Just w I sh were chrome...... My bike wasn't quite as bad as when you started your polishing, but close..... Attached is a picture or two....

[@SweetScoots]

Watch the video a couple more times, then go to the SHOW MORE of the videos description and you will find all of the products/tools we use in all of our videos. Thank you so much for watching and sharing, we appreciate it my friend. Have a great week. mad Mike Sweet Scoots

[@lg8471]

@@SweetScoots Thx.....

[@geneimes6507]

Can you use the ceramic coating in place of the rim protectant?

[@SweetScoots]

Gene Imes you sure can my friend

[@roadkingrider6532]

Outstanding information! I just spent 4 hours on the wheels of my road king. I sure as hell wish I found this before I did mine. My results were definitely not what looks like 4 hours of work! I just ordered everything in your list. Thanks so much! Any issues with any of this process on the chrome on engine or exhaust with the heat?

[@SweetScoots]

If this is the stuff you are concerned about amzn.to/2DVu8ZU we've never had any problem anywhere on the bike. Thanks man, we appreciate the view and question, have a great day my friend. mad Mike Sweet Scoots

[@roadkingrider6532]

@@SweetScoots awesome it’s funny you made a comment this morning. I was just thinking about you guys. I have a question. I’m a bit nervous trying it. I ended up putting a Saddleman seat on my road king. So I have the notorious scratches on tank where old seat was and on the plastic side panels where old seat sat. My bike is a 2011. So has had a lot of time to create them. I bought the mothers and also the never dull wadding. You think I can use your process with this you showed around your gas cap to remove those? If so, also on the plastic panels? Sorry I’ve never done any sort of paint correction so am nervous about trying it.

[@SweetScoots]

Use just the mothers with these amzn.to/2yP98Cw and about 10 gallons of elbow grease or the mothers and this amzn.to/3A1kkcI , (I'm not trying to sell you on this to make 30 cents from Amazon) but, I can tell you of all the tools we have for our bikes, it is the most useful tool we have, it will save you all of that elbow grease and tons of time guaranteed. Thanks again for watching and for asking, hope this helps brother. mad Mike Sweet Scoots

[@roadkingrider6532]

@@SweetScoots haha how funny just got the Milwaukee another dumb question. Yellow or white pad?

[@roadkingrider6532]

@@SweetScoots just got it done! Thanks so much for the tip. Used a microfiber with the mothers. Tank looks like new! Amazing.

[@stephenyoung3917]

Could anyone please let me know, where I can purchase these wheel cleaning attachments to connect to my drill as he does in this video ?

[@marshab3895]

He lists all the tools and products in the description pull down section (down arrow next to the title) with links to Amazon where they can be purchased. But you can also get them at many car parts, hardware and Walmart retailers..

[@SweetScoots]

These amzn.to/2EPeAnM Thanks for watching and remember all of the products/tools we use in our videos can be found in the SHOW MORE of the videos description. Have a great week Stephen. mad Mike Sweet Scoots

[@mikeb6418]

MIKEY!!!!!!! My Man !!! Got L O V E T H A T B I K E!! Holy Crap.... beautiful man. I have a bike as well but nuten like tat

[@SweetScoots]

big Mike hope you are doing good and all went well thank you very much and we have some great stuff coming down the pipe:)

[@greggriffin3242]

That we all came out awesome I have a question for you how would you clean up Harley Davidson forks that are caked on with bugs and guts like crazy and then shine

[@SweetScoots]

First, I would use this amzn.to/33tPuYw to remove the majority, then I would use this amzn.to/3uzQ2Ip to buff the remainder off, then apply this goo.gl/z9TrgR so you don't ever have that problem again Greg. Thanks for the view and question, have a fantastic day my friend. mad Mike Sweet Scoots

[@greggriffin3242]

Which one the sunny side or the clean strip

[@greggriffin3242]

How would I clean the fork legs with the coating applied

[@SweetScoots]

Use this amzn.to/33tPuYw click the one that says Add to Cart.

[@SweetScoots]

Follow our instructions and products in our first comment "First, I would use this amzn.to/33tPuYw to remove the majority, then I would use this amzn.to/3uzQ2Ip to buff the remainder off, then apply this goo.gl/z9TrgR so you don't ever have that problem again Greg." ....... Then when it comes time to clean future bugs off your forks, I think that's what you are asking, they should come off much, much easier, just use this amzn.to/3uzQ2Ip It will not affect the coating. Hope this answers your questions. Have a great day. mad Mike

[@rickdff62]

I'm here!!

[@SweetScoots]

Hey nooby glad to have you thank you very much and we have some great stuff coming down the pipe:)

[@ejg34]

What year pitbull. I have 08 and I am looking for a different exhaust

[@SweetScoots]

eric it is a 06 and they list for exhausts for these are endless my friend :)

[@ejg34]

@@SweetScoots yeah I can't find the reverse radius for the 08

[@SweetScoots]

eric gibbs you will most likely have to buy good used ones on eBay mike

[@ejg34]

I'll try to find.

[@SweetScoots]

eric thas part of the fun for sure is the looking and shopping for your bike : ) mike

[@flysuperman3660]

Do you 303 the outside of your bike tires?

[@SweetScoots]

we sure do and will be doing a video on it and how to do it :)

[@flysuperman3660]

Sweet Scoots thanks buddy!

[@SweetScoots]

you are very welcome my good friend :)

[@gerrymcintosh4477]

How does one access, “show more”?

[@SweetScoots]

Gerry McIntosh See these for cell phone photos.app.goo.gl/zcUc4PC6OOb6opfy2 for home computer photos.app.goo.gl/VZe9wemKiNIQRYQw1 hope this helps

[@crissaxx7562]

wen i saw that brass brush i got scared & said o no !!!!!! then i saw the rag & was like o thank god .

[@SweetScoots]

LOL.. thanks for the comment. Have a great day. mad Mike SweetScoots

[@MichaelDay-cs4gj]

I'm not good with youtube. What was the product?

[@SweetScoots]

Here's the entire tools/product list: TOOLS: Mothers amzn.to/2C18A9Z "SPECIAL" Rim Protectant amzn.to/2DVu8ZU Polish Wadding amzn.to/2B4dMJz 12" Drill Bit Extension amzn.to/2kk5BVz Drill Extension Set amzn.to/2icfIHG Brass Brush Kit amzn.to/2AoWoBH Aluminum Polishing Kit amzn.to/2zppltV Dewalt Hand Drill amzn.to/2AXc2ls Micro-Fiber Towels amzn.to/2yTPhgR Motorcycle Lift amzn.to/2CDKWAb Best Gloves amzn.to/2B8kLBh Buffing Ball amzn.to/2CMWsKH Polishing Cones amzn.to/2EPeAnM

[@jacaughron55]

I use that polos religiously for everything even alloy rims on one of my bikes …headlights…whatever

[@SweetScoots]

Nice!! Thank you for watching and sharing, we really appreciate it brother, have a great week. mad Mike

[@lg8471]

Cannot copy/paste pics..... I have a Gorgeous old school ish flamed BigDog Chopper

[@SweetScoots]

Very cool LG! Thank you for watching and sharing, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@SweetScoots]

My Biker friends we are glad to have you here with us on our new bike/scoots/motorcycle channel, see our main channel here for tips and trick for most all cars and trucks kzbin.info

[@daveross5314]

Sweeeeeeet Rim Job cool name lmfao

[@SweetScoots]

Dave Ross thank you my biker brother.

[@rob8761]

So what is the secret special product?

[@SweetScoots]

These are the two products amzn.to/2C18A9Z & amzn.to/2DVu8ZU and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer Sweet Scoots

[@stevecheshire5046]

@@SweetScoots the 2nd link for the sealent just shows a list of different products, not the actual product?

[@SweetScoots]

@@stevecheshire5046 we now use this when the other is out of stock amzn.to/3X6p9KI thanks mike

[@stevecheshire5046]

@@SweetScoots is that the green stuff WAC?

[@fadiabdo9976]

Mothers will clean chrome on Mc also

[@SweetScoots]

It certainly will my friend, glad to have you with us! Thanks for watching, have a fantastic rest of your week. mad Mike

[@bikersoncall]

4:23 ''these rims are in really bad shape'' Your 'bad shape' rims look 10 times better than mine, even after several hours yesterday. My 'electra glide rims are tough to get at and the design makes them tedious to clean and polish, much more so than what I see here. and with sharp edges that catch the pads.

[@SweetScoots]

well Sometimes it takes a 5 gallon bucket of elbow grease and just stay on point with the saying a journey of 1000 Miles has started by one step forward one after the other do a little bit at a time and you’ll get it bikes are very hard to get to in some areas that’s for sure it takes the patience of Job to polish most of them

[@lg8471]

Lol..... I read down further.... found links..... Thx......

[@SweetScoots]

Ha! You are welcome my friend! Thanks for watching, we truly appreciate it LG. Have a fantastic day. mad Mike Sweet Scoots

[@michaeldixon3445]

I didn't see a show more option so the product not mentioned remains a mystery 🤔

[@SweetScoots]

These are the two products amzn.to/2C18A9Z & amzn.to/2DVu8ZU and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer Sweet Scoots

[@michaeldixon3445]

@@SweetScoots sweet, I use mothers but my aluminium is still hazey. It driving me nuts

[@SweetScoots]

@@michaeldixon3445 to remove the haze make sure you are using these amzn.to/3W9mqPi and i can guarantee if you polish with amzn.to/3GHkgRt long enough using those Microfibers the haze will go...you may need a 5gal bucket of elbow grease depending on how bad the aluminum is..thanks Mike

[@patg555]

Nice. Should only take about 7 hours to do entire bike

[@SweetScoots]

The more chrome, the longer it is going to take for sure! That's a good thing though. Thanks for watching, have a great day my friend. mad Mike Sweet Scoots

[@georgegriffith7263]

I like to go 80 90 and im 65

[@SweetScoots]

I don't think the need for speed ever leaves you brother :) Thanks for watching, have a great week. mad Mike sweet scoots

[@imnotahealthandsafetyperso4889]

Step 1 mothers step 2 autosole step 3 white diamond step 4 rim wax but it you want to do more ride time step 1 powder coat step 2 ride it simply

[@SweetScoots]

Thanks for watching and sharing Mark. Have a great week. mad Mike Sweet Scoots

[@whisperingdeath308]

I can't do that with my Indian.

[@SweetScoots]

Sorry to hear that my friend, have a great day and ride safe. mad Mike Sweet Scoots

[@whisperingdeath308]

@@SweetScoots No worries. It's just more meticulous by hand, but i get it done. My Chief Vintage has big fenders so gotta work around it. Chrome looks like new though.

[@cfmechanic]

Lol I see why u can't mention name get flagged intantly

[@SweetScoots]

You got it brother! Thanks for watching, have a great day my friend. mad Mike Sweet Scoots