How to port and shim K20 Type S Oil Pump

  Рет қаралды 12,843

Sleeperworks Garage

Sleeperworks Garage

Күн бұрын

Пікірлер: 43
@HondaK20
@HondaK20 5 ай бұрын
Yeah..this is quality port oil pump! 😊
@hahnmowermotorsports179
@hahnmowermotorsports179 2 жыл бұрын
Vaseline works great prime your oil pump when you put it back together
@RSXSykO
@RSXSykO 7 ай бұрын
Good job buddy
@LordJetstar97
@LordJetstar97 9 ай бұрын
Great info!
@roda1999
@roda1999 3 жыл бұрын
Excellent video thanks for the info.
@efrainrosario281
@efrainrosario281 4 жыл бұрын
I’m gonna try this on my h22a wen it comes time to build it
@vipereagle7446
@vipereagle7446 4 жыл бұрын
Differnt style pump for the h
@A.QPerformance
@A.QPerformance 3 жыл бұрын
I am gonna try it on a k24 oil pump.1st i am gonna cut the balance shafts and than port
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
That would be dope if that works. I have so many k24 pumps laying around.
@Hoodrat_rari
@Hoodrat_rari 2 жыл бұрын
might do this
@Aeroynamic
@Aeroynamic Жыл бұрын
What was the thickness of the washer under the spring?
@a1superkeys482
@a1superkeys482 3 жыл бұрын
Thanks for the info
@Ru_is_that_you
@Ru_is_that_you 4 жыл бұрын
very informative 🔥🔥
@wickedsatan1
@wickedsatan1 3 жыл бұрын
Putting shim is something new for me, whats the purpose?
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
It's supposed to help bump up oil pressure.
@michaelb5330
@michaelb5330 Жыл бұрын
Good content
@raton5936
@raton5936 3 жыл бұрын
I'm currently rebuilding my stock motor with future plans of going higher rpms. Would doing this now be a bad idea?
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
No doing this will increase your oil pressure allowing for better lubrication at higher rpms.
@davidmachado3987
@davidmachado3987 3 жыл бұрын
Is the baffle tray and screws also from the RSX base? Or am i pulling out only the pump if i find one?
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
I got everything out of a base model.
@davidmachado3987
@davidmachado3987 3 жыл бұрын
@@sleeperworksgarage thanks for the info. I didn't know they used the same pump.
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
@@davidmachado3987 Right! When I pulled the pan I was like 👀👀
@alomechanthasinh4079
@alomechanthasinh4079 2 жыл бұрын
Was gonna ask the same question. Now I know.
@nillhazari7369
@nillhazari7369 3 жыл бұрын
nice
@djmlover
@djmlover 4 жыл бұрын
I need one , can you please tell me where can I find one and for how much, I’m also planning on buying a k24 for my 1999 crv 5 peed, thanks
@sleeperworksgarage
@sleeperworksgarage 4 жыл бұрын
Online the oil pumps are running $200+. if you find a k20a3 in the junkyard grab the oil pump from that it's the same as type s.
@djmlover
@djmlover 4 жыл бұрын
@@sleeperworksgarage I want the same one you have, which brand you recommend? I just want to buy and spend one time on good quality parts, I appreciate it
@sleeperworksgarage
@sleeperworksgarage 4 жыл бұрын
@Dj MLover I grabbed mine from the junkyard from a k20a3 and ported it myself. A ported oil pump is going to cost around $350 not including the other parts you need for the conversion. I recommend getting an OEM oil pump and having it ported and shimmed or buying an already ported pump. There are a few companies that offer ported k series oil pumps.
@Jaguair55
@Jaguair55 9 ай бұрын
Does a little pointing honestly make a big difference though? Real question
@sleeperworksgarage
@sleeperworksgarage 6 ай бұрын
Yea it's moves a lot more oil. Assuming your talking about porting.
@Jaguair55
@Jaguair55 6 ай бұрын
Yes thank you. Also do you have videos on k series trans modifications like dogbox install?
@sleeperworksgarage
@sleeperworksgarage 6 ай бұрын
@@Jaguair55 No I'm not at that level yet. 😅
@Jaguair55
@Jaguair55 6 ай бұрын
Thanks bro keep posting good shit.
@SIRICKO
@SIRICKO 3 ай бұрын
Oil pumps push volume not pressure!
@luisrank11
@luisrank11 4 жыл бұрын
Is it ok to reuse oil pumps?
@sleeperworksgarage
@sleeperworksgarage 4 жыл бұрын
Absolutely just have to make sure the tolerances are within spec!!
@joshuamejias1515
@joshuamejias1515 3 жыл бұрын
good video bro
@thedude3189
@thedude3189 3 жыл бұрын
How thin is too thin for porting? Yours looks thin as well on the corner towards you if your looking at it. I just ported mine like yours...did yours hold up? I'm scared to install mine now.
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
Not sure exactly. I didnt take very much material off at all, it may have looked like that on camera (I am using a cell phone). My engine hasnt been run yet it's still on the engine stand. Also you are doing something like this at your own risk. If you feel like you shouldnt run it then dont. There are companies that offer professional porting services for our applications.
@thedude3189
@thedude3189 3 жыл бұрын
@@sleeperworksgarage I've been porting for 5 years now various heads and throttle bodies and my 3rd k24 build, did a poor man's type r as well b18c1 b16 head, Frankenstein d16z6 y7 build and a couple 4runner 3.0s, only my 2nd oil pump i ported that's why I was just asking because I just seen you do it lol. I've seen other professionals fuck up all the time on simple stuff and ugly work, online pre ported bolt ons I've seen crooked and half assed. I ported it less thin than yours, you took out more material than I did so I'd be iffy on running your pump, so I don't know if I shouldn't run it because like I've stated i don't know how thin is too thin, I can send you pics it looks like it came from factory all my work does, regardless why would I have someone else port it even more???
@sleeperworksgarage
@sleeperworksgarage 3 жыл бұрын
@@thedude3189 lol I'm not saying you couldnt do it. But that there are companies that offer the service that are reputable. I also meant to start with a not ported one and have it sent out not to continue porting the one you have. I watched someone else port theirs and mimicked theirs and they run some pretty big power engines. I do plan on checking oil pressure manually when I turn it on for the first time. Just havent gotten to that part yet. I'm all for trying it at least, if it doesnt work I'll just throw a stock pump in. I'm pretty confident itll be fine tho.
@delectronics118
@delectronics118 2 жыл бұрын
@@sleeperworksgarage hi man, do you have any updates on that?:D I am curious if you are still on ported one and if you gained some psi Thx✌
@34built30
@34built30 4 жыл бұрын
💪💪
K20A2 Oil Pump Upgrade installed on  a JDM K24A!
16:57
Hybrid Racing
Рет қаралды 60 М.
In depht comparison of k20 v k24 oil pumps
24:44
A.Q Performance
Рет қаралды 3,3 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 44 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,1 МЛН
Porting How-To! Pocket Port Honda K20
13:00
HeadGames Motorworks
Рет қаралды 6 М.
how to port and shim your b or d series oil pump
19:40
streetstancecivic garage
Рет қаралды 4 М.
All About Your Engines Oil Pump
14:17
Uncle Tony's Garage
Рет қаралды 96 М.
HOW TO PORT AN RSX TYPE S OIL PUMP!
9:44
KSS Racing
Рет қаралды 12 М.
Adding Oil On The Back Side Of Bearings During Engine Assembly. Good Or Bad?
6:47
Honda Oil Pump Porting Tech B20 D16 B18c K24 K20a
16:15
SRDmotorsports
Рет қаралды 15 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 44 МЛН