how to port and shim your b or d series oil pump

how to port and shim your b or d series oil pump. this is a b series oil pump.
Equipment used in the filming is Gopro Hero 8 from
Gopro.com
Othe equipment used for filming is the iSteady gimble from
hohem.com
If looking for the hot challenges go to
Music from Uppbeat (free for Creators!):
uppbeat.io/t/bosnow/street-kn...
License code: LJGODNB0O38QIPOS
DeathNuts.com

[@flipflapflop2985]

The thing that really interrupts flow it the “t” passage right where the Allen head plug is. Last thing to do in order to make it all work properly is to smooth out that corner/T with some aluminum epoxy and turn it into an elbow. Also, port match the exit into the block.

[@streetstancecivicgarage]

Well I will have to do that to the next one. bc unfortunately the pump I have on it is giving me low oil pressure took it off and the clearance was way to big on the pump gears. So not getting oil pressure. Got a new oem pimp on the way.

[@jimhiscott2918]

Port match. I never thought of that!. I'll check that out with a paper templet

[@mikeorion5150]

There should be a small piston at the end of that spring.

[@streetstancecivicgarage]

Thanks this is the first b series motor I have built. Didn't know that it should still be in there I will take it apart and make sure it's there. Thanks for the info. I've asked alot of questions.but it's hard to get people to answer them.

[@jimhiscott2918]

Port yes, but send it to 4P. Shim, never. Not nessasary. You'll only increase cavitation.