How To Powder Coat At Home LIKE A PRO!

  Рет қаралды 87,882

HHWheels

HHWheels

Күн бұрын

Пікірлер: 72
@JimmyHoffa88
@JimmyHoffa88 2 жыл бұрын
Wow a KZbin instructional video that I felt zero urge to fast forward through any of.🥇 A+. Rare. Y'all better recognize. This is the definition of concise. 👌
@HHWheels
@HHWheels 2 жыл бұрын
Thank you!! This is one of our first “how to” focused videos and we are so happy you enjoyed it! Thank you for the awesome feedback ❤️
@rxs20
@rxs20 2 жыл бұрын
Bravo! The biggest thing I learned early on was: Racking of your part is extremely important! Know how you're going to rack a part and make sure you can get it in/out of the oven before you even start .... and furhter, I will rack the part (especially the hanging parts like your horn ring) and hold the oven rack in a vice and spray it while it is hanging from the rack, so that I don't have to risk bumping it while transferring it to the rack and into the oven.
@HHWheels
@HHWheels 2 жыл бұрын
So glad you learned for this video! If you have any questions we are always happy to answer!! ❤️🙌🏻
@mikhail716
@mikhail716 2 жыл бұрын
Short simple and straight to the point awesome video thank you for this.
@HHWheels
@HHWheels 2 жыл бұрын
She’s a pro!
@arrogant444
@arrogant444 Жыл бұрын
Looks great. Be careful when working with metallics, particularly anything with iridescent sparkle - you can easily overbake it and kill the color (have made this mistake many times). That's why I always undercure the color and then bake the clear coat at the lowest possible temp for longer. Columbia Coatings makes a low-temp clear coat that you can bake at 325 deg for like 15-20mins vs 400 deg for 10. Have had much better results using that as a clear coat for those kind of colors.
@Neoprenesiren
@Neoprenesiren 5 ай бұрын
I always check manufacture, kind of like cooking. You don’t take chicken to the same temp as beef and vice versa.
@chrisanderson2984
@chrisanderson2984 Жыл бұрын
Wear some harbor freight nitrile gloves working with Acetone. My skin eventually developped a sensitivity to solvents...and it dries your skin out really bad...fantastic video.
@HHWheels
@HHWheels Жыл бұрын
Thanks for the info!
@Neoprenesiren
@Neoprenesiren 5 ай бұрын
I got acetone in my eyeballs once. Was doing wet industrial paint looking up. Dropped right between the area of my brow ridge and safety glasses. The minute it touched those glasses they become cloudy and the minute it got into my eye I was like a bat out of hell looking for water.
@brettritchie4014
@brettritchie4014 21 күн бұрын
Outstanding video. Very easy to follow steps !
@freddymardiceii3273
@freddymardiceii3273 2 жыл бұрын
Great video Caroline!! You make it look really easy! Well done! 😊
@HHWheels
@HHWheels 2 жыл бұрын
Thank you! glad you enjoyed it!!!
@TickTownProductions
@TickTownProductions Ай бұрын
Great video ! Thanks for taking the time to create it.
@wallywally3738
@wallywally3738 Жыл бұрын
To anyone watching this video and the person that made this video . Please wear correct gloves when handling acetone it enters the bloodstream through the nail cuticles and repeated exposure has been known to cause liver damage and liver cancer .
@HHWheels
@HHWheels Жыл бұрын
Thank you for the added info! :)
@Dudesunperfect
@Dudesunperfect Жыл бұрын
It’s crazy how every mail shop scrubs finger nails down with acetone “nail polish remover” every time
@RetroAnachronist
@RetroAnachronist 11 ай бұрын
Women have been using it to remove nail polish for decades.
@walkerderby8849
@walkerderby8849 10 ай бұрын
Tell that to a welder
@loadedfun4764
@loadedfun4764 6 ай бұрын
That goes for most chemicals. I learned in my apprenticeship that most chemicals have a 99% absorption rate into the skin. Gloves are inexpensive and replaceable.
@Dazz-zj6np
@Dazz-zj6np 3 ай бұрын
You could set a static system for full coverage less waste, phosphor coat for better adhesion of coating.
@welsh8588
@welsh8588 2 сағат бұрын
Does that oven not require a specialized high amperage outlet? I like the idea of using an old electric full size oven but I don’t have one of those outlets in my garage.
@geipelstoys9923
@geipelstoys9923 2 жыл бұрын
Awesome! the black metallic on that water bottle reminds me of the paint on the 2014 Dodge Challenger my dad used to have, I think they called it Phantom Black Metallic. So slick!
@HHWheels
@HHWheels 2 жыл бұрын
You’re totally right!!!
@RetroAnachronist
@RetroAnachronist 11 ай бұрын
I’d like to see something big like a PC case get coated. Would make for a very unique looking PC.
@bryceoverstreet6026
@bryceoverstreet6026 5 ай бұрын
What media do u use for skat blast cabinet
@GhostedCoder
@GhostedCoder 2 жыл бұрын
Powder the double bike! Great vid!
@HHWheels
@HHWheels 2 жыл бұрын
Thank you!!!
@joshuasigler5177
@joshuasigler5177 2 жыл бұрын
Man sure would be cool to do a video on a Cummins 4BT engine swap in a 91 Toyota Land Cruiser
@mcgeem1989
@mcgeem1989 2 жыл бұрын
I love seeing a female doing these kinds of videos
@HHWheels
@HHWheels 2 жыл бұрын
Thank you!!! I love doing these videos! ❤️❤️❤️
@AKcabins
@AKcabins 29 күн бұрын
I agree! Love to see all the other ladies out there !!
@JamesStacey-r9h
@JamesStacey-r9h Жыл бұрын
How do you put a plastic water bottle in the oven?
@HHWheels
@HHWheels Жыл бұрын
Haha it’s not plastic. It’s a steel water bottle!
@JamesStacey-r9h
@JamesStacey-r9h Жыл бұрын
@HHWheels ohhhh lol oops, thanks 😊
@kevinshack2004
@kevinshack2004 17 күн бұрын
Great video
@dglennon20
@dglennon20 5 ай бұрын
What is the mess that is left behind? Can I do this in my pavement princess garage and sweep it up after?
@HHWheels
@HHWheels 4 ай бұрын
Yes you can! As long as your air pressure isn’t too high, you shouldn’t have a crazy amount of wasted powder
@scottiencali
@scottiencali 2 жыл бұрын
Hey you do good work!! Ill be sending some of my stuff over for you :) Hmm wonder if anyones done an entire beetle shell in powder coat before?
@HHWheels
@HHWheels 2 жыл бұрын
now that's a cool idea!!
@leojuninocencio
@leojuninocencio Жыл бұрын
Can I use 3 gallon compressor?
@HHWheels
@HHWheels Жыл бұрын
Yes you can! You need low pressure and they can easily maintain that! Your gun will specify the exact settings for that, but I used about 8-10 psi out of a 2.5 gallon for quite a while!
@tnourse
@tnourse 3 ай бұрын
Amazing! Thank you! 🤘🏁🤘
@HHWheels
@HHWheels 3 ай бұрын
Glad you liked it!
@jackas1583
@jackas1583 2 жыл бұрын
Well done.
@HHWheels
@HHWheels 2 жыл бұрын
Thank you!!
@PetePeterson-wu5ps
@PetePeterson-wu5ps 24 күн бұрын
Degrease prior to sandblasting
@bravemind8152
@bravemind8152 8 ай бұрын
Excellent 👍
@HHWheels
@HHWheels 6 ай бұрын
Thank you! Cheers!
@jwristen24
@jwristen24 11 ай бұрын
Would do
@KUDRARACING
@KUDRARACING 2 ай бұрын
Siick
@Sillyboy9572
@Sillyboy9572 8 ай бұрын
I use wax and grease remover. Abit more safer
@incidentalauditor
@incidentalauditor 2 жыл бұрын
Super models, actresses' got nothing on this girl. He man darn lucky
@2000jago
@2000jago 7 ай бұрын
Please don't show us the finished steering wheel. I have no desire to see that...
@HHWheels
@HHWheels 6 ай бұрын
Ha ha ha😂
@jlomeli07
@jlomeli07 6 ай бұрын
Pro powdered coater 😑
@HHWheels
@HHWheels 6 ай бұрын
AT HOME :)
@TheWhiteMerc_
@TheWhiteMerc_ 6 ай бұрын
Great info! Like 👍🏼 comment Subscribe ✔️
@HHWheels
@HHWheels 6 ай бұрын
Thank you!🙏
@DougBe38
@DougBe38 10 ай бұрын
Completely off topic, but it's totally hot to see ladies doing this. Just my 2 pennies!
@HHWheels
@HHWheels 10 ай бұрын
She’s a Supa-Starrrrrr!✌️
@cicada3312
@cicada3312 2 жыл бұрын
No wonder it cost so much to powdercoat
@HHWheels
@HHWheels 2 жыл бұрын
Time consuming ! Thx for watching!
@officialmunroe5036
@officialmunroe5036 Жыл бұрын
U didnt even show the steering wheel in black chrome straight up BS
@HHWheels
@HHWheels Жыл бұрын
Yeah, it didn’t turn out too good. Would have made a bad example. Sorry.
@RobBob555
@RobBob555 Ай бұрын
God that music is Annoying 🤦🙄
@MyleeBenoit
@MyleeBenoit 26 күн бұрын
Mute it.
Harbor Freight vs Eastwood - Powder Coating Systems Compared
24:46
Redline Stands
Рет қаралды 206 М.
Unknown Coatings - Ep 67 - How to Powder Coat Logos
20:27
Unknown Coatings
Рет қаралды 157 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Anodize Your Own Parts any Color with Household Products
6:35
TITANS of CNC MACHINING
Рет қаралды 3,2 МЛН
10 EASY Steps to Powder Coating at Home. How To Powdercoat
12:09
BleepinJeep
Рет қаралды 816 М.
How To Powder Coat Without An Oven!
10:51
I Like To Make Stuff
Рет қаралды 441 М.
Powder Coating At Home! You Can Do It!
21:55
Blondihacks
Рет қаралды 344 М.
I Built a Powder Coating Oven For The First Time
24:27
Make it Extreme
Рет қаралды 245 М.
5 WAYS TO RUST PROOF Without Paint!!!  CHEAP, FAST & LONG LASTING
11:18
Cafe Racer Garage
Рет қаралды 2,9 МЛН
The Ultimate Beginners Guide to Powder Coating - How to Powder Coat at Eastwood
14:20
The DIY $100 Powder Coating System...NEVER LOOKED SO GOOD!!
15:58
Curing Powder Coating with Heat Gun - Can It Be Done?
6:03
Redline Stands
Рет қаралды 119 М.
How to repair damaged clear coat AT HOME! with SPRAY CANS!
13:36
⚙️Homie Hektor⚙️
Рет қаралды 6 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН