How to powder glaze cabinets and furniture

[@dominicjasso1742]

DAD I'M SO PROUD OF YOUR KZbin CHANNEL

[@finefinishsupply]

Thanks buddy!

[@willmurphy6996]

@@finefinishsupply Dad I am just basing this on how old you look. You have an awesome son to come on your channel and brag of you. Obviously you are great at being a dad as well. Congrats. I have been in the painting business in some form or another for decades. Just recently though started my own business (sept 22,2020). Only have sprayed a few sets of cabinets (7) but I know the process of spraying is easy but here learning various ideas/spins and techniques to separate myself from the Shwerwin Williams Kem Aqua grab ya money and run guys. First I would like to thank you for taking the time from your day to do up such videos and educate us. Secondly I came from an autobody background. Not saying you havent learned this but just in case you haven't. On cabinets I took a thing from autobody with me for a more consistent scratch/scuff pattern. 3M scotch brite pads. Grey or gray what ever way you wanna spell it lol, and maroon are my go to. Easy to get into the areas that sand paper tries your patiences with. I use dark grey with krud cutter and initial scuff. Wipe down let dry then then dark grey again. Blow off then maroon pad. Blow down, alcohol wipe down, blow dry/off then prime or straight paint. depending on the customers desired look. My first job/cabinet job was oak. I was between holy phuck these folks are crazy enough to trust me with their walls and trim/doors but completely nuts trusting me to do their cabinets lol. Not just the kitchen but the man cave bar cabinets in the basement. Lets just say starting out on my own. First job should of been about $130K now learning more on pricing and the normal rates. I did it for $73k and change. The kitchen was just the usual. Solid color. I used Urathane in iron ore color. The bar cabinets he wanted this corvette blue color with the rally stripes up through ech door. Man I was tired just from the measuring, taping and masking lol. I ened up sanding the doors down to bare wood. Rubbing in one coat of white for the rally stripes in the cheapest water paint I could get from HD. I used it to mix mdf dust as a grain filler for the remainder of the door that was to get the corvette blue color. I sprayed two coats of poly over the ares to get blue. Scuffed it with a LIGHT greay (not dark grey) scotch pad. Used valspar automotive paint to spray the corvette blue 5 coats. Mixed for me by a local body shop. Auto paint sprays so nice lol. Scuffed it down well again with the light grey pad, sprayed it with 4 coats of valspar euro clear. Let it cure for 3-4 weeks at their place. Went back and buffed them out with auto polishes. The customer was ecstatic which obvioulsy made me feel the same. Going back in a few weeks (or I hope) when these covid restrictions lift in my area to paint the shell of a 1980s. corvette he wants to mount on his wall in his mancave/bar. Anyway that ramble is why i am here. I wanna build a portfolio of work that separates me from "(insert city name) pro painters" or pro painter such and such. I might have just done a few jobs yet and very few in my city know my company yet. But im not starving to death and in 2 yrs 5 yrs or it might take 10 yrs. When people in this city what a top notch job done on their painting needs I will be ( and I will not accept being recommended as a 2ed choice) the one thats recommended by anyone that had me do their work or anyone thats seen my work. Working in an small auto body shop I was the one doing the work and the boss/owner got the praise. I left sept past and he's not doing so well now. Odd how that works out. lol Anyway thanks again for the educational vid and the time it took you to make it is very much appreciated. Once I get to the point where I can buy or lease a space thats not my cluttered home garage lol. I will share my own knowledge as well.

[@willmurphy6996]

cancel my comment on the soctch pad. I finished watching the vid lol.

[@littlebeebs1]

That’s awesome ! I love to see families be kind to each other . I see why you’re proud. He is very talented 😊

[@mattbridges8384]

Aw :)

[@garygunnels5256]

FINALLY a PROFESSIONAL who doesn't need music to "enhance" his video. Well done! Really enjoyed it! Looking forward to seeing more.

[@levimust4479]

You're so right! That muzac makes so many videos unwatchable.

[@hsmd4533]

Omg I couldn’t agree more! So glad there’s no background music.

[@finefinishsupply]

Thanks for watching!

[@drdanbhcmg]

Its fun to watch a "pro" work. You make everything look easy and explained each procedure very well, Thank you!

[@finefinishsupply]

Thanks for watching!

[@thegoodchad3578]

I like that satin finish better than a flat. Nice work. Thanks for the video.

[@SuperMrpanchovilla]

Just two words: BEAUTIFUL WORK. Thanks for sharing. Blessings.

[@jackjune156]

Over my head for most of it but of course a thumbs up for your efforts. Still thoroughly enjoyed watching you work and that beautiful finish you create it

[@finefinishsupply]

Thank you!

[@staceycasta]

I love the Red, with black glaze technique!

[@everydayliving1975]

Thank you very much for the information. I like that you told us what you use.

[@finefinishsupply]

Thanks for watching!

[@krislatchman1638]

Excellent work. Grate demonstration

[@finefinishsupply]

Thanks for watching!

[@patrickdunn8918]

I’m a woodworker who uses regular products (off the shelf as you mentioned) , and I must say I love that look. I will look into it, and all the best to you with your new venture. You are obviously very good at what you do, and business oriented 👍👍

[@finefinishsupply]

Thank you!

[@toyotatundra0455]

I don't know how some people get on cable TV pretending to know and telling others about DIY projects. I think you should be on TV with a DIY show. Good luck and I'll be watching your channel.

[@nandoleon7967]

Really like it, thank you for sharing your knowledge, keep uploading videos.

[@finefinishsupply]

Thanks!

[@barryroeder1883]

Great Video...I enjoy using the Axalta products as well as their powder glazes...great job

[@finefinishsupply]

Thank you!

[@brucebellows7772]

Loved your video, the presentation was excellent. ,

[@ajbox2369]

Just want to say great job! I love it. Plus I actually think the black and red combo looks pretty cool. 😎👍🏻

[@richardlewin9282]

That's a beautiful finish 👍

[@finefinishsupply]

Thank you!

[@alpacino187]

You are a life saver, thank you soon much.

[@finefinishsupply]

Thanks for watching!

[@MrIsaacpr7]

Just came across your channel a few days ago and I quickly became a fan. A quick suggestion: It would be great if you included links in the description to the different products and tools that you are using in the video. You could even profit by doing this as an affiliate link ;). Looking forward to more of your videos!

[@replyback7]

Appreciate you sharing. Best wishes , hope you continue doing well!

[@MrChiroron]

Great video thanks for sharing

[@finefinishsupply]

Thanks for watching!

[@ibrahimwehbe1153]

Your sharing your life experience with us . We can never thank you enough.

[@rvingmontanezway103]

Man I’m Hooked I’m Glad I came across your channel.. love it .. my father was a big time cabinet maker back in the 80s and I was the helper just like you , sanding ,spraying, cleaning , painting I did it all. now after I gave up Tractor Trailer driving for 26 years. I have found the love to paint cabinet and more again 😂.. I definitely will be learning a lot more from you thank you Brother..

[@iainsime2614]

Hi I live in the UK and am a furniture sprayer. Your video got my attention and I would love to now more as I am thinking of going out on my own and this seems like the kind of product that would suit me. I hope to hear from you soon, many thanks Iain.

[@vr6caddy843]

Hey Iain, looks like Axalta has gone out of business. I'm also in the UK. Not sure where abouts you are but you should look into Spraymastersuk who do kitchen stuff with some amazing new finishes I've seen and offer a course that I'm going to book on.

[@rabmccudden683]

Good video bud. Nice work 👍🏻

[@finefinishsupply]

Thanks man!

[@carlose9027]

Dude this is so dope!! I wish I could learn this! Keep up the good work and keep posting videos!!

[@littlebeebs1]

I love pneumatic paint guns . I use one to spray my plants for bugs ( perfect coverage without saturation ). I also want to start using one to paint doors and apply poly to bar tops and other things . So much control and smooth finish . These look gorgeous! Great job 😊

[@ShamaticFocus]

Haha you move like a top cheff or an martial artist. You must be very experienced sir! Would love to see more.

[@tonyburry9036]

Love this guy, wish I could work along side with him!! Luis great job as always, come out with more videos lol 🔥🔥💯

[@guzavevic6736]

That looks amazing. The process looks easy and fast. I'm definitely going to learn how to use those products.

[@omarmachado5364]

👍👍👍👍 awesome video thank so much for tips and products inside.

[@pamelao6762]

Just beautiful!

[@finefinishsupply]

Thank you!

[@andrerivera5381]

Hey Louis just to tell you, that you have a talent to motive people ,thanks a lot, keep up the good work ,need to see more videos soon

[@mjbrennan9725]

Hmmm.... On June 1, 2017 Axalta Coating Systems completed its acquisition of the Valpar Corporation’s North American industrial wood coatings business, which includes the Zenith brand. Valspar divested the business in connection with the antitrust approval of its acquisition by the Sherwin-Williams Co.

[@melodyhart2017]

Very pretty,not into the red but it is very pretty ,especially after the glaze is applied.

[@M5PaintCrew]

Wow! I'm in the cabinet refinishing group on Facebook with you. 2020 our goal is to grow our refinishing business. I'm out here in Las Vegas. I think the PPG store carries this. Man great work.

[@audreybowles6357]

This is beautiful work!

[@mikemyers7317]

Hi, great video, can you get same speed to finish schedule with Renner?

[@mikemyers7317]

Great stuff!

[@alexblah3144]

This looks nice. Can this be done with an airless spraying???

[@genefox6330]

Great video!

[@MikeAckerman-y2g]

Thanks for sharing this video Louis! Do you still sell Axalta or strictly Renner now? How well do you think that precat lacquer will perform overtime compared to Renner 851 catalyzed or 688 catalyzed fully?

[@andriy1982x]

Beautiful job. You can share link where to buy this povder glaze? Thanks

[@Thejoker-ii7eq]

Hi Louis and hope all is well, thanks for showing us the good work and the expertise that you have and if you don’t mind me asking,where can I get the product from,thanks Dan

[@av8rbri473]

does that lacquer finish “yellow” over time?? our cabinets in our house started to yellow i think after 5-6?yrs old. looked like complete shit. I redid them in Benji Moore AURA and don’t expect any issues down the road..... you obv. are talented and know your stuff; thx for shearing

[@Kayakmom9]

QUESTION I bought a gallon of this and have been trying it by brushing on. However, I must use spray bottle to wet and remove. Is this because of brushing on? I don’t always get out a sprayer?

[@skyelyte1699]

Where did you get it? Do you have a link or did you buy it in a store?

[@roelperez3299]

Excellent Demo video

[@elio1965]

What brand of gun are you used?? Can I use the same gun on pps system ?? I work on wood finished . Thank you for your respond. That's a great job you doing it.👍

[@creatingmemories9370]

Thank you excellent job, think I look into a small inexpensive spray gun much faster

[@coyote_hunter5247]

This may be a dumb question but I'm not good at painting or any form of this work. Why do you need to scuff the surface before applying a second coat? Why wouldn't it be fine just adding another coat? Does it not adhere as well? The cool part about this finish is that it doesn't have to be perfect and at this point it would just be considered authentic which would be more valuable to me personally. It has character. It's not like buying laminated floor where every so many pieces are identical. Beautiful work!

[@paintdoctormd]

This is awesome. I wish I could come work with you for a few days to learn. Will I find a vid about exactly what guns you are using, your air filtration system, that whole setup? Love all of it.

[@alvr1ptg]

Great video, very informative. Where do you buy the products you're using?

[@marthabohnen115]

Wish I can use your services, from South Africa!

[@eduardocastaneda3177]

Hello good job the vinyl lacquer is water or solvent

[@tjscott1204]

Louis, is this base product from axalta still available. I really like the recoat time. Also is there anything else available that is comparable with this axalta base coat. Just wanting to know my options. Any help is appreciated . Thanks man

[@kristinetaulbut4975]

Very nice

[@TheWynch]

I love the color you put on, this is what I want to do for color choice. But I have issues. I'm not a pro and can't afford one. I am trying to figure out how to put a lasting finish on a old mobile home molded plastic cabinetry. How? I can't afford new wood cabinets, have to make what I have look good.

[@finefinishsupply]

Sorry I only use industrial products. Wish I could help!

[@guillermo7777]

Woooow that is nice, great explanation thanks, the red looks great I never thought, I live overseas and there is not glaze at all over here, any suggestions of what could I use instead? Thanks in advance great job, pro

[@jimfeaster4837]

What a clear coat for stain finishes ?

[@rafaelmolina1903]

Can you make “stain” or “wood” colors with this process ? I paint a lot of fiberglass doors and interior doors with a Faux paint technique and we need to make it fast and more uniform colors.

[@CarlosRivera-cf6qk]

Hi, just watched your video, I really enjoyed it. The part I enjoyed the most was that you did not talk much , you introduced yourself and got straight to work. Question; How does the oil from your fingers effect the product? Question 2; Where can I buy these products? TY GBY🙏🏽

[@finefinishsupply]

Thanks Carlos! I ensure to wash my hands religiously when in the finishing room. When this video was made I was using a lot of solvent based products but now switched over to Waterborn. Where are you located?

[@joelmorgenstern5643]

What is the temperature of your shop? We use a lot of lacquer at our shop for trim and doors, but fight the temperature as far as drying goes here in Northwest Montana. Thanks man, the product looks great!

[@lkm5462]

You should use a full face respirators for speed , ease and better protection

[@finefinishsupply]

Thanks for the tip!

[@alexdroban4312]

Great video. Is this product durable and UV tolerant so that it could be us3d on a front door? The glazing effect would be great! Thank you!

[@luisrobles1363]

👏🏽👏🏽👏🏽👏🏽 amazing amazing work thank you

[@rexnzoe698]

How do u spray both sides with out damaging the fresh coat ? Or do u wait for one side to be fully dry and then spray the finish coat on the other side ?

[@gregpodrasky110]

What would you do with the base cabinets? The same process on site in the home? Would you use different product or just the vinyl lacquer base coat with clear? And I'm assuming this product wouldn't work well with grain filler since you brushed the material to open the grain...

[@finefinishsupply]

Same process. this product works well over oak without glaze. I was going for a cerused finish, that is why I wire brushed it

[@mansardmanor3869]

Lacquer based, I assume that the product is high with VOC which if used indoors at the job site. You run a high probability that you may indeed start a fire. Nice for the doors, what about the base cabinet frame 🤔 Hope I'm wrong, have you seen news footage of a house painter using high VOC and the house is full of flames coming out of the windows

[@jaredhinton1518]

Do you have a video setting your spray gun up? I know you have a pro gun set up there but it seems like you are hardly using any product and getting an amazing finish. Would like to see how you calibrate.

[@danielboggues5161]

Awesome keep up the good work!!

[@arsenplishka8518]

hello, please tell me what pressure you use for spraying the primer and what for the top coat, I use Renner polyurethane? thank you

[@anselmo053189]

nice work man! just wondering , whta sprayer are you using and where can i get this product in the san francisco bay area?

[@woodworkchannel3353]

Nice work , i have cabinet shop and using chemcraft precut lacquer , nice finish but im having issues with durability,, would you recommend better quality precut like cambell maybe or should I switch to post cat lacquer? And again you do nice finishing, !

[@finefinishsupply]

Post cat lacquer will give better results!

[@yahnwhos]

Great tutorial of the product! thank you for the information!

[@finefinishsupply]

Thanks for watching!

[@monteperez444]

Louis, Thank you. Very informative. We are considering changing our kitchen cabinet painting systems. Where can I find a local distributor here in Colorado. We are also considering Target coatings EM 6500. Most cabinet jobs either choose a Ben Moore or SW color for their cabinets. Thanks again Louis.👍

[@justatitle]

I tried the website provided but it gave it a 404 error. I love how organized , and efficient your shop is set up. Also, I’m not sure what the sanding pad you used was, I know you started with 150, then 240, but what was the pad called that you used to remove the powder stain? Anyway, Nice job!

[@finefinishsupply]

Hi Carolyn! Check out our website for sanding products. Www.jassosales.com

[@alvaromartinez255]

In the video you could not see but did the grain stay in the pore. I've used filler stain to a to achieve this and of course they did the grain I think your product would work better

[@cweed76]

Where do you get powder glazes from and do they only work through an HVLP. I've been using flat paint to get this look but this looks easier.

[@Fundoracarpentry]

Hi Louis Have you ever used the general finish products? If you have ,on top of stained pine ,how many coat of the sanding sealer and how many coat of the precat lacquer Thank you

[@audreyyoung5154]

I wish I could have someone do all my cabinets but couldn't

[@TheFlojoe55]

Beautiful

[@whatsupwithsteve]

Neat stuff! We like to use water borne conversion varnish for its durability in kitchens. Does this powder glaze work with the c.v.???

[@Rev22-21]

Louis, Just watched an amazing video of yours and really enjoyed it. Question: Is this product available or offered in 'dye' form? Or have you any videos on refinishing using dyes? Thanks and best regards. (P.S.) The best comment and complement by far is your son's. All the gold in the world can't compare.

[@8700jarocho]

Really nice work. You dont need priming woth that type of product??

[@finefinishsupply]

This product is the primer. It has to be clear coated.

[@LukePighetti]

Hi there, is it common to leave the inside of the door unpainted? Not trying to give you a hard time, just trying to learn.

[@dsafford2729]

Thank you!!!!! Great video!!!!

[@joannefreeman3573]

Would you share sprayer info for us newbies?

[@arturo4700]

good job

[@ronramsden6996]

great educational video , thanks for sharing

[@finefinishsupply]

thanks for watching!

[@jimfeaster4837]

How much is clear coat per gallon ?

[@jesusmaldonado6430]

Hola amigo donde puedo conceguir ese producto que estas utilizando

[@davidanthonyguy167]

Hi Louis, great job. My question is how do you deal with water in your lines? Any special equipment required fir de condensation?

[@finefinishsupply]

Oil water separator before your equipment will greatly reduce the chances of it effecting your finish.

[@davidanthonyguy167]

@@finefinishsupply Thanks, but I was thinking in a professional setting is there a more effective way? I believe large shops utilize a much more sophisticated set up, what system do you use for no water and oil in your lines?

[@robwilleford3737]

wow looks great, Louis Im a novice woodworker how just picked up a shinny new 4 stage turbine HVLP system I'm these produces would spray fine with an HVLP?

[@itrusthomeservices4906]

Louis, great info. Thanks for sharing. What spayers are you using? Air assisted airless and a gravity fed air gun? What about processing at the face frames and panels that need to be finished on site? Any lingering smell? These products all water based?

[@finefinishsupply]

Kremlin eos 15:1 and Apollo 7700 hvlp. These are solvent based products and definitely have a smell. Make sure to use proper ventilation when working in an enclosed area

[@kurtsaldana9086]

The powder glazes is water base or oil base or what kind please let me know teach me

[@terrijuanette486]

Great video. Thanks. Question: Can I powder glaze a wall?

[@shannonbenoit8184]

Awesome video!! Fun to watch! Do axalta products have to be sprayed? I’m redoing my bedroom furniture that I paid a “ professional” to do that she completely ruined. Therefore my wood is not smooth from stripping sanding etc. so I need more coverage with brushing paint on . I would love to use this product line

[@finefinishsupply]

Hi Shannon! Axalta products are best sprayed. I would look into a waterbased option. Wise Owl has a product called one hour cabinet enamel that can be brushed and seems to hold up well on furniture

[@803brando]

pre-catalyzed lacquer? sounds like blinker fluid. whats the bake temp for proper cure?

[@Wisteria_Lane]

I'm looking for a glass like shine similar to fine paints of Europe for furniture. Does this product also have a glass like shine?

[@adi8418]

Awesome job! Would 2k poly work instead of the precatalyzed lacquer?

[@finefinishsupply]

Yes it will work. 2k poly is a great product

[@ncbuckslayer8244]

How well would these products spray out of a titan 440 airless sprayer with a FFLP tip?

[@jimfeaster4837]

How much cost per gallon