How to Prep a Tumbler for Epoxy and Glitter | DIY Epoxy Tumbler Series Start to Finish | Episode 1

[@dionnethomas4470]

This was great because I always used the rubbing alcohol to clean my tumblers before spray painting but I wasn't sanding it down before hand but I will start today

[@kimberlybowers6547]

Thank you! A lot of people gloss over the prep part. I really appreciate this video!!

[@DIYAlex]

You’re welcome! I agree, I think that’s why it’s been such a popular video!

[@dacelc03]

This is the first video I have seen that shows how to prep. I always hear about doing it, but not how. I'm getting all my stuff now to start making tumblers and didn't know exactly how to prep.

[@DIYAlex]

Great!! I hope this helps clear it up for you!

[@lizblank4852]

Perfect video, so clear and all the steps covered. Next video now x

[@apollo49100]

OMG! Thank you so much for sharing this video! Love how you two advise the users from step A to step Z. I am waiting for my tumblers and I will probably watch this video at least another couple of times before starting my tumbler adventure!

[@DIYAlex]

You're welcome! That's the beauty of it. You can watch it as often as you want!

[@VeronicaG_777]

Thank you both so much for these pointer's 😁

[@emilymatvey7860]

Absolutely cannot wait to try making a cup. Finally got all the supplies I need and am so excited!

[@DIYAlex]

Woo hoo! You're going to love it!

[@leannezilka9355]

Always intimidated by epoxy and getting it ready. thanks for the video.

[@DIYAlex]

You’re welcome!

[@mandymarlette3476]

i love the Color Street you have on your nails !! thats prob one of my fav sets !

[@jeaniegabert207]

This was the very first DIY Alex video I ever watched and was so excited to work on my first tumbler afterwards! 😁😁

[@DIYAlex]

Aw how sweet! I’m glad you found it helpful!

[@GrandmaRose-g5f]

Thanks this really help I’m a beginner

[@MarinaAlondra10]

Thanks for the video! I just started this journey and I had no idea that you needed to prep the cup.

[@DIYAlex]

You’re welcome! It’s SO helpful to prep!

[@Litld02]

Love those ColorStreet Nails!!!

[@DIYAlex]

Thank you!

[@pcbtoys8499]

Thank you so much i'm wanting to start doing these but i wanted to know why don't you use the white tumblers and do you have videos on how those are done? thank you so kindly

[@DIYAlex]

Spray painting the cup adds a lot of grip for the epoxy, so I prefer to add the color myself. I don't have a video on using the white cups. Sorry!

[@dolphinchick408]

Hello. What is the 2nd way to glitter a tumbler. I seen the one using the epoxy method but cant find the video to show the other way

[@DIYAlex]

There are several methods that you can use including Mod Podge or Spray Adhesive (like Loctite). I don’t have tutorials on any other methods currently, but I’ll add a video to my list!

[@dolphinchick408]

Thank you. I just noticed in the videos you said you were gonna show 2 ways to glitter it but only shown the epoxy method so was wondering what your 2nd methods was

[@DarthSchelder09]

Any tips on getting your tumblers levels in the turner?

[@DIYAlex]

I find that using a foam insert is the best way to ensure it's level. Footballs (like what I used to use) make it harder to get the cup level.

[@kelleystramiello2386]

Did you do anything to protect the inside of the cup before spraying? I would think spray paint would get inside the cup.

[@DIYAlex]

No, I wait and clean it up at the end. You can see how I do that in the last video of the series. :)

[@dawnnelson4189]

Thank you this was a big help. I'm close to doing my first glitter tumbler and I don't want to mess up

[@DIYAlex]

I’m so glad! It’s totally normal to mess up. Just give it your best try!

[@loribrooks6736]

Another FABULOUS video Alex (and Kate)...I'm off to watch your part II.. THANKS for sharing your knowledge!

[@DIYAlex]

Thank you! I’m so glad you liked it!

[@pcpcnow]

Hi! What size are those footballs? I see they sell lots of sizes?

[@DIYAlex]

Honestly I'm not sure! Sorry!

[@debrayfreemanmcdowell7987]

My apologies in advance for what may seam like the same question. But if the cup came colored already be white or any other color. If you have to ruff (sand) the steel cup so that all will adhered to the cup with the process that you suggest. What would you do for those that come with color but you want to add glitter to it. BTW I'm in love with all of your series on doing the tumblers the best I have seen so far. I just want to make sure that I am doing it correctly as I am tried of wasting money on glasses which is what I have been doing the process on because they are cheaper. I know trail and era is how we learn. Keep doing what y'all are doing. Thank you again

[@laurahuitron9397]

I have the same question. My tumblers are white and I’m afraid that if I sand it the white will come off. Do we just clean it with alcohol? 🤷🏻‍♀️ Thank you, I love your videos!

[@debrayfreemanmcdowell7987]

@@laurahuitron9397 Laura please let me know if you got a response. The one that was given to me was I don’t have to paint them but I’m still confused as to what other prepping may need to get done.

[@DIYAlex]

Hey ladies! Thanks for your question. I would do a light sand over top your color to rough up the surface. Then clean with soap and water and then rub down with alcohol. Epoxy may “slide” off super smooth surfaces, so the sanding gives it something to stick to. If you’re nervous about sanding I would at least finish with a spray of clear acrylic spray all over before applying epoxy.

[@tammypottinger3691]

I have used coffee filters to clean with alcohol, it doesn’t leave any fibers.

[@DIYAlex]

That's an awesome idea Tammy! Thank you for sharing!

[@michellegilley6550]

Coffee filters are great for cleaning glass too

[@deannaharting2267]

What about a colored tumbler can I do the same prep work without the step with the spray paint?

[@DIYAlex]

Yes you can.

[@traceysnock3915]

How long does the paint need to dry after sanding, & before adding the glitter?

[@DIYAlex]

As soon as the epoxy is applied you can add glitter.

[@debbiestayton3205]

Were you two in my sewing room tonight because I was ready to do my first tumbler, went to review some videos, and found out I had to prep it first. Got it sanded and washed, off to Lowes tomorrow for the paint.

[@DIYAlex]

What perfect timing! It makes all the difference!

[@debbiestayton3205]

@@DIYAlex Yes it does. Don't know why it never occured to me to prep the stainless steel tumbler before. Thanks for the video!! Yours have always been so helpful.

[@DIYAlex]

Debbie Stayton You’re welcome! I’m so glad it was helpful ☺️

[@estherperez4109]

I dont know if it's been ask...do you need to always paint after sanding? Thank you for doing what you do. I am learning so many things from your videos.

[@DIYAlex]

You’re so welcome! It’s a good idea to paint it either white or a color that matches the glitter you’re using, but you don’t absolutely have to paint it.

[@joso75]

Did you make the wand, or whatever you used to put the cup on, while you spray painted it? If so, do you mind sharing how you made it?

[@DIYAlex]

I bought it from Etsy! Now there are a lot more available on the market on Etsy and Amazon.

[@deannaharting2267]

Can you do the same thing with a colored tumbler without the step of the spray paint

[@DIYAlex]

Yes, but a light sanding is still good to add texture.

[@lindasemporium]

If I wanted to use black glitter will black spray paint be best?

[@DIYAlex]

Yes

[@dawnchaney3251]

can i use the white sublimation tumbler the skinny

[@DIYAlex]

You can, but it's not necessary to use a sublimation tumbler. They are usually more expensive.

[@SoLi484]

Hello I’m a beginner and wanted to now what kind of epoxy do you recommend me to use?

[@DIYAlex]

I recommend Alumilite epoxy for beginners :) www.651vinyl.com/alumilite-amazing-clear-cast-16-ounce-kit.html

[@Vsv1224]

Great video. Where do you get the sticks you hold the cups with when spraying?

[@MysticMerGirl]

They are the PVC pipe from the cup turners. Or you can just get extra PVC pipe & make your extra arms to use for spray painting 😊

[@DIYAlex]

Yep exactly what Jennifer said!

[@heidicavagnaro811]

I love your videos thanks thinking about trying this

[@DIYAlex]

Thank you!

[@staceyenck7354]

Do you need to sand the cup if you’re not spray painting the cup?

[@DIYAlex]

I would do a light sand so that the epoxy has a good grip on the surface.

[@roxanneh298]

If you do alcohol inks, do you sand afterwards?

[@DIYAlex]

You only sand over layers of epoxy.

[@roxanneh298]

@@DIYAlex thanks for replying!!🙂

[@ohsosarah]

thanks for all the great tips! i plan on starting tumblers soon!

[@DIYAlex]

You’re welcome! It’s a lot of work, and a lot of fun!

[@vicentamadera7850]

Very interesting I really like that video but would like to know if I could sublimate an design on it help please

[@DIYAlex]

No, you can't sublimate on top of epoxy tumblers or plain glitter tumblers. They have to be sublimation blanks from the beginning.

[@stephaniemoseley2918]

Do you have a video for the next step after you add the glitter? What’s the clear shiny coating that goes on after glitter

[@DIYAlex]

Yes, all the steps are in order in this playlist: kzbin.info/aero/PLdqAY6wTCkWCeMGXrRhEhYsorONi7RDQc The clear coat is clear acrylic spray.

[@kewlgurlthu]

Oooo I know those nails in the video!! NUCLEAR FUSION COLOR STREET NAIL STRIPS! YAY! and thanks for the video!!

[@DIYAlex]

Yep you're right! You're welcome!

[@jessicawillis2238]

Not sure if this has been asked but can you buy a tumbler that’s already matte white and skip this part? They are a little rough already

[@DIYAlex]

If it’s already rough it may be powder coated, so I don’t recommend it, but if you can get it to work then that will save you a step.

[@lindasuehundley6864]

MakerFlo has a large selection of tumblers that have already been sanded. Huge time saver. ❤

[@aubreyneff3987]

Hi! Love your videos! If the cup has a paint powder coat color from the store (not glossy) that has some slight texture, do you still recommend sanding or could I resin and glitter right over it instead of sanding it all off and spray painting?

[@DIYAlex]

I would at least give it a light sand to give it more texture. You can skip spray painting if you like the color of the cup.

[@AnaSilva-ux6us]

If I don’t want glitter on the whole cup and want the chrome of the cup to show in some areas, do I still need to sand the whole cup? I’m just starting to do this so I have a lot to learn. I appreciate your response very much!!!

[@DIYAlex]

I would not sand areas that you don't want glitter on.

[@lorischmidt9608]

Are these special tumblers or can you use any stainless steel travel mugs? My second hand store has a bunch of ss travel mugs, can they be used?

[@DIYAlex]

These aren’t particularly special mugs, so any stainless mugs should work.

[@lorischmidt9608]

Thank you! 🥰💜

[@underhiswings3066]

What if I’m using a black tumbler? Do I skip the sand paper and just use rubbing alcohol?

[@DIYAlex]

I would lightly sand it and then wipe it down with alcohol and wash. Sanding gives the cup texture for the epoxy to stick to.

[@85UNCG]

What's the holder pole you are using while you spray paint the tumbler?

[@DIYAlex]

It's the arm of my cup spinner. It's made of PVC pipe and a football to help hold the tumbler onto the arm.

[@lindalagrand5853]

Where does you get a wooden holder??

[@DIYAlex]

Etsy, Amazon, etc.

[@crisrdgz]

Can I use a colored stainless steel tumbler ?

[@DIYAlex]

Yes you can, but then the paint is kind of irrelevant. So I prefer to buy them plain and paint them.

[@crisrdgz]

@@DIYAlex Thank you for the fast response. Do I still have to prep by sanding it?

[@DIYAlex]

I would still sand to provide texture for the epoxy.

[@nicoleautry564]

Sorry if I missed the answer to this but if I have a 16 oz tumbler how do I figure out how much epoxy to use?

[@DIYAlex]

It varies by each step, so keep watching through the series to learn thee answer for each one!

[@kellywalker52]

Very helpful video!! Thank you ladies!! Just one quick question can I use Acrylic white paint instead of spray paint?

[@DIYAlex]

Yes you can. I find that it’s a little more streaky, but it works fine too!

[@nancydaniel4766]

Newbie question.... could you just as well started with a white tumbler, if not why ?

[@DIYAlex]

You can, but it needs to be white and smooth. It’s usually cheaper to buy plain stainless.

[@LOVESTOWRITEKID24]

can u use any dish soap cuz thinkin of lookin at dollar tree

[@DIYAlex]

Yes any soap is fine.

[@LOVESTOWRITEKID24]

@@DIYAlex Nice tysm

[@princessdisa1829]

Thank you Alex!! This video has been made at perfect timing for me!! Yipeee! I can not wait for the next step!! You ladies rock! ♥️

[@DIYAlex]

Yay I’m so glad it was helpful! Thanks for following along ☺️

[@dodgergirl8]

What spray sealer do you recommend for the ombre tumblers?

[@DIYAlex]

Clear acrylic spray. I like the Rustoleum brand.

[@wendybarreto871]

Do you cover the open part of the cup so spray paint does not get inside the cup when spraying it?

[@DIYAlex]

Wendy Barreto You can leave it open and we’ll show you how to clean it out in our last video of the series.

[@naomidomerese4005]

Where do you buy the tumblers from?

[@DIYAlex]

The Stainless Depot is my favorite.

[@debrayfreemanmcdowell7987]

Thank you so much for your response. So I can go straight to adding the glitter to the cup with the white cup? I love your video and getting ready to go over again series 3 before moving onto part 4. So want to confirm if I want to put several different glitter colors I can keep completely white and move on? Will the glitter still hold without ruffing the tumbler with the sand paper?

[@DIYAlex]

I responded to your question in another comment with what I recommend ☺️

[@dolphinchick408]

Hello. I wasnt sure how else to ask but if i just wanted solid color with no glitter what would be the best process. Like sand spray/paint, then epoxy or should i seal paint before epoxy?

[@DIYAlex]

To make a non-glitter cup, i would prep it, paint it using acrylic or spray paint, then epoxy, sand if needed, and epoxy again. Sealing your paint shouldn't be necessary.

[@theresapoe-lamoreaux9496]

I love your Nuclear Fuchsian Color Street Nail Polish! ❤️

[@DIYAlex]

Thank you!

[@karlazavada5073]

I didnt know I was supposed to sand it all the videos I gave watched never showed that makes sense my epoxy would dip off so bad. Should i always spraypaint the tumbler?

[@DIYAlex]

It’s really helpful for getting an even cost of epoxy! The paint helps the glitter look brighter but it’s not required.

[@59AnneRose]

Wow your you tube video is the first that I have seen where you show how to prepare the cup..thank you so much really helpful.

[@DIYAlex]

You’re welcome! We tried to think of everything for you ☺️

[@RicanKittyluvsPanda]

I have a question, to put a pic or decal of a pic on the tumbler- how do we do that - I’m just beginning

[@DIYAlex]

The decal was cut on a Cricut machine.

[@heidiwhale7789]

Love your video thank you for sharing. Quick question, if I already have a coloured tumbler do I need to sand before epoxy and glitter?

[@DIYAlex]

I would sand lightly to add texture.

[@aprillaskey6419]

Hello! Will the clear acrylic spray cause fish eyes if it is not matte finish? The one you have linked is glossy and I have heard in other videos that anything but a matte finish will cause fish eyes in the epoxy. Thank you for the wonderful videos! I am just starting out and haven't made anything yet but your videos are so informative and have given me the courage to start this beautiful craft.

[@DIYAlex]

Hi April! I’ve only ever used glossy and never had a problem! Good luck! Don’t watch too many videos, just go for it!

[@aprillaskey6419]

Thank you! It seems the best way to learn this is trial and error! I love your videos they are a great place to start.

[@briand.2365]

I love your videos! Thank you for sharing! What type of epoxy should I use? What is a good alternative for Alumilite epoxy?

[@DIYAlex]

I recommend starting with Alumilite epoxy, but beyond that I would just start buying different brands and trying them. I used Pro Marine after Alumilite, but everyone has a different preference.

[@andrewbutzy8820]

I have a question...So if your going to keep the tumbler the same silver color and not paint it would you still sand it? Because, wouldn't you see the scratch marks from the sand paper?? So should I just skip that step and goto the rubbing alcohol cleanse instead?? Thank you for your input.

[@DIYAlex]

Hey Andrew! Yes, I would probably skip the sanding. You could wipe down with alcohol and then consider spraying clear acrylic sealer all over the cup to give a similar textured effect that the sanding does.

[@pennybestward3895]

great video, do you have to let the spray paint dry for 2 days before you can do anything? i heard there was a gas off process

[@DIYAlex]

No, you can start working with it as soon as it's dry.

[@melissaquiroz1208]

do you need to spray paint cup or can I epoxy and glitter directly on steel after alcohol step?

[@DIYAlex]

It’s best to paint it first

[@davidmoreno8121]

Do you have to sand if the tumbler is already has a color and coating? I added vinyl and wanted to seal them

[@DIYAlex]

If you're not adding any glitter or alcohol ink then just wipe them down to get rid of dirt and dust before epoxy.

[@kyraj6539]

Can you spray paint clear sealer than put image than epoxy?

[@DIYAlex]

If you’re not going to glitter it then that’s fine! You can paint it a color if you want to instead of using clear.

[@MrsQueKnightWilliams]

Do we do this for color cups too? Do we sand it down until the color comes off

[@DIYAlex]

Is it a colored stainless steel cup or a powder coated cup?

[@MrsQueKnightWilliams]

@@DIYAlex its a color stainless steel cup

[@ashleyscheer446]

if i have a matte finish tumbler in like rose gold do i need to sand it and spray it?

[@DIYAlex]

I still would prep it because it gives the glitter a better surface to stick to.

[@shoppingrevealllc9097]

Can you use tumbler that meant to use for sublimation.

[@DIYAlex]

Great question! I haven’t tried it myself, but I would think so. It mostly depends on the coating on the outside of the tumbler. Make sure you prep it well if it’s really smooth!

[@donnaflint2667]

I have a question about handles. My Hubby likes to use a handle on his cup. I don't think it would fit over the dried epoxy though. How would you work with the handle? Should I leave it on and tape it, or epoxy around it?

[@DIYAlex]

I would epoxy the handle just like the rest of the cup. Do you mean an attached handle or the ones that slide on?

[@donnaflint2667]

@@DIYAlex It's a slide on handle.

[@carterfamily5685]

Thanks ladies! Really want to do this!!

[@DIYAlex]

You're welcome! :)

[@freethinker4048]

If my tumbler is pink or green do I still want to sand and paint it?

[@DIYAlex]

I would still sand it but skip the painting.

[@freethinker4048]

@@DIYAlex another question I’m using a chunky and shaped glitter. I did 2 coats modgepodge and 1 coat epoxy. Do you think I should do another coat of epoxy before sanding it smooth? I’m not finding anything for a tumbler like it. How many layers is too much?

[@alessiajoy2906]

What are you using to hold tumbler while you spray paint?

[@DIYAlex]

A PVC pipe with a pool noodle on the end of it that I shove inside the cup.

[@thegeekgaragepodcast6959]

Thank you so much for this video! I had a quick general question about prepping: If the point of sanding is to give the epoxy a rough surface to stick to, then why the spray paint? Wouldn't the spray paint just cover all the scuff marks made from sanding?

[@DIYAlex]

You’re welcome! Yes that’s you sand. You would think it would cover the scruff marks, but it doesn’t. The paint helps make the glitter brighter. You can also match the color to the glitter if you prefer instead of white.

[@gneebee]

Thanks. you make GREAT instructional videos!

[@DIYAlex]

Aw thank you! I make them with you guys in mind ☺️

[@debrayfreemanmcdowell7987]

If I have a colored tumbler do I still do the same process? I purchased some and they came in white

[@DIYAlex]

You can skip the painting step if you have a colored tumbler.

[@debrayfreemanmcdowell7987]

Thank you so much for your response. So I can go straight to cut adding glitter? I am loving your videos and getting ready to go back over video 3 before moving on to the 4 part of this series. So do I want to put more than on color glitter it is ok to keep completely white as it is and move on? Will the glitter still hold with out ruffing the tumbler with the sand paper?

[@M.MDesignz]

I make resin crafts, but tumblers always intimate me. I splurged and got what I need to get over my fear. But do you tape the top?

[@DIYAlex]

I personally don't, but you'll need to experiment so you can find what t works for you!

[@sand_one08]

Do you always need to spray paint it?

[@DIYAlex]

I think it’s always a good idea

[@Bubaluski92]

Do you need to sand a tumbler if it’s already colored?

[@DIYAlex]

I would do a light sand just to give the epoxy a surface to stick to. You don't want it too smooth or the epoxy could create fisheyes (little holes in the coat).

[@patriciahomer5342]

Thanks just thinking of trying this. Nice job!

[@DIYAlex]

Thank you!!

[@blinksbill1138]

What type of epoxy would work for this? I bought jb clear weld will that work

[@DIYAlex]

There are a lot of great brands out there. We used Pro Marine in this video. I haven’t heard the brand you listed, but that doesn’t mean it won’t work!

[@chloerogers8027]

Where do I get epoxy and glitter

[@DIYAlex]

You can find it all linked in the description of the video ☺️ if you’re on your phone, look to the right of the title of the video and you’ll see a triangle pointing down. Click that and it will show you the links to everything we used. You can also find glitter and epoxy now on 651Vinyl.com!

[@mdoooo7]

I’m at a standstill I can’t find anything that would work to rotate the cup and let it turn For 3 to 4 hours can you help with this or give me some ideas

[@DIYAlex]

You need a cup turner to do that. You can find them on Amazon.

[@jameswilliams5902]

How would you add a picture or image to epoxy cups?

[@DIYAlex]

You can add a picture using printable vinyl.

[@FC-kw4mw]

Hi! Thank you for the video! Very helpful! I have a couple of questions: When salvaging ceramic mugs and SS tumblers for made sublimation (that come with a ploy-coat) is it necessary to prep this way still? Or can you epoxy right over that? Also since there are paints designed to adhere to metal, what does the sanding do if you still have to cover with paint? Isn’t the epoxy adhering to the paint, a coating, then? So using a paint for metal could eliminate sanding? Sorry if I’m being confusing- I just don’t understand how covering the metal with paint is different than applying epoxy to a coated surface. Thanks for any feedback 🙏🏾

[@DIYAlex]

I would prep this way no matter what. I don’t recommend putting epoxy on ceramic mugs. The sanding is necessary to create texture of the epoxy to stick to. It doesn’t have anything to do with the paint. The paint is only necessary for color to make the glitter brighter. I hope that helps clear up your questions ☺️

[@FC-kw4mw]

@@DIYAlex thank you for your reply, that helped😊

[@elkrig1441]

Thank you for this video. Do you only glitter and epoxy the stainless steel tumblers?

[@DIYAlex]

You’re welcome! I have only ever used stainless steel tumblers, but I have seen others do the plastic tumblers like 651vinyl’s color changing ones. I’m sure it would would work!

[@debintn77]

I wondered that same thing, I did my 1st cup last week and it's a hard plastic drinking cup, had flowers on it... I like to recycle/upcycle, not for drinking but a pencil holder or brushes... I wouldn't think the color changing cups would work, I'd be afraid the epoxy would crack, because the cups are "bendable" , just my opinion 🙂

[@curreypanda6640]

How do you stop the epoxy/ paint from getting inside?? That's a part of prep right??

[@DIYAlex]

Some people tape it, but I don’t worry about it in the beginning and clean it out afterwards. The last video in the series shows you how to clean it out.

[@curreypanda6640]

Thank you

[@kathyfrankenstein2459]

Can you use steel wool instead of sandpaper?

[@DIYAlex]

I haven't tried that myself, but I would think it would work just fine!

[@suede_mx]

Why do you have to spray paint the tumbler first? What's the application of that step?

[@DIYAlex]

It makes the glitter brighter.

[@dkalakau]

Does the alcohol to clean need to be 91%?

[@DIYAlex]

No it can be the 70% as well.

[@thecraftyvirgo]

What is the difference between using a flat bs a gloss/ semi gloss?

[@DIYAlex]

I like to think that the semi gloss looks more sparkly under the epoxy. I haven’t ever tested them head to head though!

[@breeherline99]

Is it okay if the spray paint is speckled or does it have to be smooth?

[@DIYAlex]

As long as you're covering it with a thick coat or two of glitter, it's fine if your spray paint is speckled.

[@donnamay1150]

Hello. I am super brand new to tumblers. Why do you have to paint the cup? What happens if you just glitter after the 1st sanding? Thanks.

[@DIYAlex]

Welcome to the tumbler world! Painting the cup is a good idea because it makes the glitter color brighter. I’ve never glittered after sanding, but I’m guessing you would be able to see the scratches if you don’t smooth them over with paint first.

[@donnamay1150]

Thank you. Hope I can learn fast 😁

[@DIYAlex]

I would plan to take your time learning ☺️ though tumblers are fun, there are LOTS of things to learn. Don’t rush it!

[@Lena__-md4er]

I have a cup and it has chipped on the bottom how can I fix it?

[@DIYAlex]

Sand the area down as bast you can and apply another layer of epoxy

[@chiloveradiouncut]

I bought a lilac colored matte tumbler from Walmart. The brand is Built...do I need to sand this?

[@DIYAlex]

Is it smooth metal or powder coated? Are you going to glitter over top of it or do you want to keep the purple color as the tumbler color?

[@rikionYT]

@@DIYAlex following for the answer to this 🙂

[@laurazatarain6487]

Hi! How long to you have to wait for it to dry until you move to epoxy & glitter ?

[@DIYAlex]

That varies widely, on average I would say 5-8 hours.

[@annettehaynie6803]

does it matter if the paint is gloss or matt or anything else? thank you

[@DIYAlex]

Not really since you’ll cover it with glitter.