How to print from ipad / iphone wired or wirelessly

Wassup Fam,
I know many of you are using wireless print servers to print from your Selfie Stations aka iPad booths. Regardless of whether you are using a DNP WCM2 or a laptop computer for your print server, I can help you save your event with a simple $40 hack if your wifi is slow or ever goes out. This would also work if you are doing an event with lots of wifi interference or at a conference where they intentionally block your signal.
When photo boothing, backups are an integral part of your business. Even if you aren’t using these accessories, it’s always best to have these in your back up bag for when you need them. Watch this video as I go over these secret hacks to save you from ever having to give a refund. Make sure to watch until the end for my BONUS hack.
As always, if you found the information helpful, it’s 100% free. Please leave a like and subscribe to the channel. The knowledge is invaluable and it motivates me to make more content for you.
#wiredPrinting iPad booth
#wirelessPrinting iPad booth
#PrintingIPADbooth
#WCM2wirelessPrinting
#PBXRex
#rexsphotoboothreviews
Ethernet iPAD Adapter (Lightning)
amzn.to/451CDvL
Ethernet iPAD Adapter (USB-C)
amzn.to/3M8bHlh
Ethernet to USB A adapter
amzn.to/41CSEFC
USB A to Lightning Cable
amzn.to/456IKPA
USB C to Lightning Cable
amzn.to/3O9Fjl1
WCM2 DNP printserver
amzn.to/3H9bbld
DNP QW410 Printer
amzn.to/3Av4Ahk
Windows 10 PC
amzn.to/3BvLdFE
Apple MacBook Air
amzn.to/41HRlVP
Video link
• How to print from ipad...
Contact for one on one instruction.
Rex Huang 714.330.6168

[@marilyngerena9866]

Thanks Rex!! You are fantastic for all the help you provide! Truly appreciate you!

[@Rexsphotoboothreviews]

Thank you for the kind words. Glad was able to help. Like and subscribe for more great videos

[@remlapproductions396]

Rex you are the man ! I definitely needed this hack

[@Rexsphotoboothreviews]

#youreWelcome. Glad it was helpful

[@saigonanle123]

Thanks brudahhhh, appreciate you

[@muchodj]

Your video was great. I did get the software / someone mentioned in the post. I got that and all connected via WiFi. The only problem I have is the image not printing in full 6x4 - trying to figure that out. If I had same year laptop you have - I’m sure it would of been flawless. I have a 2023 laptop. With a 13” Mac 2012 laptop

[@djbeniswift3589]

Banger video. Subbed and liked.

[@Rexsphotoboothreviews]

TY for the sub, lookout for new content coming

[@user-ns7il4se6l]

Great hack, thank you once again.

[@rexphotocerritos]

You’re welcome. If you haven’t already, like and subscribe for more great tips.

[@4sureentertainment4SureDjs]

Love it!!!!

[@brendanmichaelburchill5393]

Thanks again! 🎉

[@nixonmanuel6459]

Thank you so much!

[@scarletbegonias4343]

Thank u!!!!!! You the real MVP. You saved my event ❤❤❤❤❤❤❤❤❤❤

[@Rexsphotoboothreviews]

🎉🎉🎉🎉🎉 that’s so awesome

[@scarletbegonias4343]

@@Rexsphotoboothreviews you’re awesome! Thank you for making these awesome tutorials.

[@Rexsphotoboothreviews]

Thank you for the feedback. Keep them coming. @@scarletbegonias4343

[@rubenaponte9918]

Amazing communication skills! Super helpful video! 😊

[@Rexsphotoboothreviews]

Awesome, thank you!!! It’s why I do them. TY for the motivation

[@Rexsphotoboothreviews]

TY so much. Glad I was able to help.

[@phase005]

Thank you!

[@aprilfuller9793]

We love you fam

[@Rexsphotoboothreviews]

Hey April, thank you for the love and support. Appreciate you

[@AprilMaling]

great tips!

[@Rexsphotoboothreviews]

Thank you April. Pls like and subscribe to support the channel. More great tips coming!

[@brandonlkm15]

This is helpful. What app do you use for your iPad for the camera?

[@Rexsphotoboothreviews]

We use several, whatever the client calls out for. Booth.Events, Snappic, Curator

[@christiantoissant]

awesome resource 🤙🏽 are you using lumabooth assistant on the macbook air? i’m attempting to use the macbook air hack using airprint but am unable to get it to work like you did

[@Rexsphotoboothreviews]

Yes, using lumabooth printserver on Mac. 2013 Mac air

[@Rexsphotoboothreviews]

Yes, using Lumabooth assistant for Mac

[@chasehalverson3692]

I’m running into an issue wirelessly. Where the text arnt going through because I have to connect to the printer. Will the wired adapter help with both printing and sending text at the same time?

[@gchlongblockracing8189]

Great!

[@djwinshowthebeatcounter]

How you do 2 x 6 prints in the DNP rx1 with this method?

[@MichelleCarcamo-ty6bg]

Hi Rex! Giving this a shot with Salsa, (ipad pro + Aircast pro) thank you so much. Hopefully this is the end of my wireless printing headaches. Curious if you have tried hardwiring the ipad to the printer and connecting a DSLR camera at the same time?

[@Rexsphotoboothreviews]

Yes, if you watch the video, I have hard wired ipad to the computer NEVER to the printer directly. It doesn't work that way. YOu either have to have a computer or Aircast in between as it has the printer driver on there

[@EDGARMOSTAZA]

How does it work with LUMABOOTH app , using HITI P525L PRINTER ?

[@andreasxr]

Hello Rex Huang Thank you so much for your hacks! Are amazing! So about this hack i had an issue on my last event. I use ipad air 2022 and lumabooth printing with dnprx1. When i use this -Powertech PTH-046 USB-C- which the same adaptor but not Belkin, i had an overheating i pad and stop printing. So I have to put my old method with luma both assistant to continue my event. Do you believe was an issue from this adaptor? If i use Belkin will be fine ? Thanks in advance.

[@Rexsphotoboothreviews]

Could be faulty adapter as it was overheating

[@OzzieRisso]

I have a problem, I am using a DSLR to Ipad and Ipad to a DNP 620 with the WCM2 but it's not printing in stripes or 2x2x6. Do you know how to fix this?

[@Rexsphotoboothreviews]

Yes, you need to login to the portal and simply add 2x6/2

[@muchodj]

Agree - but I have a newer iPad / the cable is different If you advise / I’ll get what’s need it

[@Rexsphotoboothreviews]

Try the charging cable that your phone came with

[@user-ho1li7fu2k]

hello, did you ever figure out the setup?

[@noelramos4486]

hello; i watched somewhere that aircast pro 2 is fast? is that true?have you tried using that?

[@PerfectWeddingDJs]

Great video Ok so I have a regular venue with poor phone signal and useless wifi So I want to use wired printing I have an iPad 9th gen and windows 10 laptop Lumabooth assistant works fine on WiFi, but doesn’t with wired LAN I have a LAN adaptor and Camera Adaptor and tried all combinations

[@geoffryder1]

Hi Well I give it a go, I use an iPad Pro running lumabooth my laptop is a XPS 17 702x running Windows 10 64 bit , plugging the adaptor lead into the iPad it recognises ethernet cable and charge cable, upon connecting both ends the iPad does not communicate with the PC it shows the connection there , it just comes up with an identified network any help would be appreciated I have tried uninstalling the Ethernet connection and reinstall but sadly nothing happens am I missing something

[@brendanmichaelburchill5393]

Awesome video!! With this work with Salsa Booth app?

[@Rexsphotoboothreviews]

It works with Salsa. kzbin.info/www/bejne/qaeQaKWZjr-DY6ssi=3f2DE78UuJDl5ATc

[@muchodj]

Not sure if we can connect- maybe you can still help me out- I have an event on 10/07/2023- i basically bought majority of the items you have here- Im running a photo booth. Its DARKROOM - I have a dnp-rx 1HS= printer- I do have the newer- IPAd- My software could not read it- I do not have the dongle..

[@alinaguillen7211]

What ethernet adapter do yu recommend using to connect my iPad to my dnp printer?

[@Rexsphotoboothreviews]

Depending on your iPad connector, you will need one of these Ethernet iPAD Adapter (Lightning) amzn.to/451CDvL Ethernet iPAD Adapter (USB-C) amzn.to/3M8bHlh Ethernet to USB A adapter amzn.to/41CSEFC USB A to Lightning Cable amzn.to/456IKPA USB C to Lightning Cable amzn.to/3O9Fjl1 WCM2 DNP printserver amzn.to/3H9bbld DNP QW410 Printer amzn.to/3Av4Ahk Windows 10 PC amzn.to/3BvLdFE Apple MacBook Air amzn.to/41HRlVP Video link kzbin.info/www/bejne/nqXRe3yLd6x4fMk Contact for one on one instruction. Rex Huang 714.330.6168

[@chingyeu96]

Awesome video Rex, do you mind I asking how if I wish to connect my iPad to internet while connecting to Ethernet wcm ? I’ve tried several times as once connected to WCM Ethernet then I will lost my internet connection

[@Rexsphotoboothreviews]

There is a setting that says internet connection in the portal

[@EEeehh00]

Hello. Do you have a tutorial to ipad.pro.connecr to Canon camera? And connected to dnp printer

[@muchodj]

Just got the dongle and will try with Ethernet cable. I’ll be using a MacBook Pro. That’s ok - correct? It does not have to be windows laptop.

[@Rexsphotoboothreviews]

If you’re using a MacBook, you don’t need the adapter

[@crispyeats7625]

Can I use any laptap with windows 10 or is macbook suggested? Thanks

[@Rexsphotoboothreviews]

Both work really well. Depends on which one you have available to you.

[@japhicdesign]

What are your LumaBooth settings with the last bonus hack using the lightning cable?

[@Rexsphotoboothreviews]

Select Lumabooth printserver in print settings

[@Rexsphotoboothreviews]

#airprint 7 minutes 36 seconds of the video.

[@elizabethcastro7489]

Hi! A question, if I’m using a window laptop, and setting with the wifi adapter, how the iPad will be charging?

[@Rexsphotoboothreviews]

The adapter I recommend in the description allows you to charge and be connected at the same time

[@stephnrayc7840]

Can I use any Ethernet cable for the adapters?

[@stephnrayc7840]

And does 60w or 100w matter for adapter?

[@Nottoday3033]

After you plug it in to the laptop, what software do you use in the Laptop? I cant see the screen of the laptop.

[@Rexsphotoboothreviews]

Some apps give you Free software to use with their iPad apps. If you don’t have one, you can use Printopia. It’s $19.99 lifetime license

[@SHNAPPED]

GREEAT VIDEO REX! Would this method work with the WCMPlus (Wired) on LumaBooth to a DNPDS40??????

[@Rexsphotoboothreviews]

Yassss, Lumabooth to WCM plus to ds40

[@SHNAPPED]

@@Rexsphotoboothreviews I’ve configured the settings but it’s still not letting me print :(

[@Rexsphotoboothreviews]

@@SHNAPPED no worries. call DNP support. they will get you going 800-814-4672

[@isabelcastanos96]

Does it work with a printer that has no wifi network mode? Like Canon MG2570s? Thank you!

[@Rexsphotoboothreviews]

Yes, you need a WiFi connection between iPad and computer. The computer is wired to your Canon MG

[@wingb7846]

while you are connecting the ipad with a windows laptop via an ethernet cable, can you use wifi with your phone't hotspot?

[@Rexsphotoboothreviews]

Yes, you should be able to connect the windows laptop to wifi

[@septayudi8939]

Can it be used on a Kodak 305 printer?

[@Rexsphotoboothreviews]

Yes, if you use the laptop method it will work. The WCM only works on dnp printers.

[@josiahelias22]

Please make a video on how you did the wired iPad to MacBook on AirPrint. I can’t figure it out.

[@Rexsphotoboothreviews]

Rex's photo booth reviews and tutorials 7 days ago It 100% works. I did it. Are you using certified apple cable? Did you turn off firewalls. Are you able to print from Mac to printer without Lumabooth?

[@katedifuntorum5736]

Hi! Mine isn’t working. Is there anything else I need to know before doing this?please help me.Thank you

[@Rexsphotoboothreviews]

If you still are unable to locate the information you are looking for, please contact DNP Customer Support at 1-800-814-4672. It’s 100% free

[@angelcoyotecatl1504]

Awesome hack

[@Rexsphotoboothreviews]

Hey Angel, which one did you like the most?

[@angelcoyotecatl1504]

@@Rexsphotoboothreviews I really admired the lighting cable from iPad to computer. I need to test it. I have a pc laptop with a software (Oprint), do you know if that will work too or it has to be a mac book?

[@Rexsphotoboothreviews]

@@angelcoyotecatl1504 love Oprint. I have a similar app I got for $19 called Printopia and I 100% know it works

[@felipacespedes]

For WCM2 all I do is plug 🔌 power then ethernet cord to hub/ iPad then WCM2 to printer? And keep the wifi off? Does it still print if Wifi is on? 3:36

[@Rexsphotoboothreviews]

Yes. The ONLY reason I turned WiFi OFF is to prove it works without WiFi if you are in a bad area. You don’t need WiFi for the wcm2 to work. You can connect it directly. If you have WiFi on, you can text the photos to your clients

[@canarycapitalrentals]

This video was really helpful 👨🏻‍💻 #livinglegend

[@Rexsphotoboothreviews]

Dude, you are the true living legend. Your whole channel is awesome, big fan!!!!

[@canarycapitalrentals]

@@Rexsphotoboothreviews 🤝 Thank you Rex

[@meredromo2516]

For the laptop option do we connect it directly to the printer?

[@Rexsphotoboothreviews]

Yes, the printer connects to laptop

[@randomnator1497]

Hi Rex , does the mac air and laptop need to be connected to the internet for this?

[@Rexsphotoboothreviews]

Does not need to be connected to the internet. The whole point is the ability to print when there is no internet

[@JohnnyREB1977]

Does this work with all printers or just the printer you use in the video? I have an HP laser jet that has recently been compromised and would like to use it this way if possible.

[@Rexsphotoboothreviews]

The aircast pro is universal and works with most Dye Sub Printers. The HP is laser jet and not commonly used for photo booths. The drivers are in the units themselves. Very few printers have wireless built in. The canon Selphys do but are not cost effective for events

[@noelramos4486]

have you discovered any faster ways to print frm ipad to printer ? (without laptop)

[@Rexsphotoboothreviews]

Try ACP3 or WCM Plus

[@mayracommodore2426]

Good video. I am trying your Ethernet cable and the WCM2 but it doesn’t print Any advice?

[@Rexsphotoboothreviews]

How may I help? I show you how to connect step by step. Can try different cables. Make sure printer media is loaded correctly and printer is working. Can also call dnp directly. They can help walk you through it. 1-800-814-4672.

[@mayracommodore2426]

@@Rexsphotoboothreviews , yes we followed all the steps. We see your videos all the time.

[@charischristou1586]

What application is used on the ipad itself for photo booth functionalities?

[@Rexsphotoboothreviews]

Almost any of the apps would function similarly

[@user-wm5dy3tc1n]

Ok but they are all show to connect the iPad but how are you going to hide all the cables when the iPad is inside of the iPad case like the salsa

[@user-gx4li5sw8f]

I tried to hardwire like you said at the end, and based on some of the comments below, I need to install Printopia onto my Mac. However, when I go to install the application it says that it requires macOS 10.7. My Mac, though, is a 2014 version that is running version 10.12. Any ideas on what I can do? Great video. Thank you.

[@Rexsphotoboothreviews]

May try looking for an older version of printopia

[@user-gx4li5sw8f]

@@Rexsphotoboothreviews I got Printopia installed, but now it will not print no matter what I have tried. I installed the drivers, added the printer, and tried everything, but none of the options work to be able to print. I have the DNP-RX1HS printer and it shows up as one of the options to print on Lumabooth, but nothing happens. Any ideas?

[@Rexsphotoboothreviews]

@@user-gx4li5sw8f try test printer from the Mac. Any 4x6 photo. Make sure that works first and do process of elimination from there.

[@craftygmom]

How can I connect to a pix box Pearl to dnp620A without wireless?

[@Rexsphotoboothreviews]

You can do it wired like in the video

[@InezL-gj2bp]

Does this work with Snappic? I wasn’t able to successfully do this.

[@Rexsphotoboothreviews]

Yes, 100% works with snappic

[@BryanMiraflor]

what app on the ipad are you using to take photos and print?

[@Rexsphotoboothreviews]

We several different apps depending on the need. They ALL have their own iPad Printservers

[@brandonsandoval2661]

With either of these hacks are you still able to use the cellular on the iPad to text images? I’d like the iPad to talk to the DNP but also use the cellular of the iPad to send images out to text

[@Rexsphotoboothreviews]

Of course, when you are wired, you are using the Ethernet channel to talk to your printer. Does not affect your texts or emails

[@brandonsandoval2661]

@@Rexsphotoboothreviews thanks, but using a 3rd party software such as DSLR booth it sends the message through internet correct? So my question is would the iPad struggle trying to send via internet? My thought would be it would attempt to send it over Ethernet and fail

[@Rexsphotoboothreviews]

@@brandonsandoval2661 it’s NOT dependent on dslrbooth. Dependent on your hardware ie iPad or MacBook. If #1 Ethernet has NO internet, it will default to #2 WiFi then #3 cellular, you can choose the order. The hardware is smarter than you think. If you Just have bad internet or cellular, than nothing is going to work

[@brandonsandoval2661]

@@Rexsphotoboothreviews interesting, great to know thank you!

[@ScottWanner-hd3oc]

If I use either hack Ethernet or MacBook can I still use WiFi for photobooth to share images?

[@Rexsphotoboothreviews]

You should be able to use both concurrently. If you are connecting to WCM or Aircast, connect the portal to the WiFi to be able to send text and email 😊

[@muchodj]

the dongle is not available for printer on AMAZON- is there another product that can be used?

[@Rexsphotoboothreviews]

Call me, I may be able to help. 714.330.6168

[@Aladdinlover75043]

How do you connect laptop to printer on second method I’m confused

[@Rexsphotoboothreviews]

Laptop is ALWAYS connected to printer via USB A to B cable

[@muchodj]

What I need?

[@focusedfrog]

Hello Rex, with the hardwire to computer with the apdapters how are you keeping the iPad charged?

[@Rexsphotoboothreviews]

The adapters have 2 ports and allow you to plug in charging cable to keep iPad charged. Look in the description of the video. I have links to the adapters for you.

[@focusedfrog]

@@Rexsphotoboothreviews hey Rex yes I have the adapter with 2 ports but is not charging the iPad? Has Ethernet and C connection.

[@Rexsphotoboothreviews]

@@focusedfrog look at description. Should allow charging unless description says differently. Some of the overseas units don’t work

[@focusedfrog]

@@Rexsphotoboothreviews ok thanks for fast reply Rex. Guess I got a bad one. Lol.

[@annmariehowerton542]

Am I missing something, don't you need internet on your iPad to use Luma booth to take your pictures and text them or email, and print?

[@Rexsphotoboothreviews]

You can connect to internet within the dnp wcm2

[@djacey123]

To use the apple lightning cable with the mac are you using a specific program on the Mac ?

[@Rexsphotoboothreviews]

Lumabooth assistant for Mac. It’s 100% FREE

[@justinbourne5888]

you don't need a server, my ipad 9th generation can print over the home network (wired) (no wifi), without any additional apps installed(thru ethernet dongle), it can even directly print USB thru the lightning dongle, even wifi-direct is possible

[@Rexsphotoboothreviews]

Depends on if your printer is WiFi ready. This is mostly for sue subs in Photo Booth/ photography.

[@d1productions]

Does it work for non dnp printers?

[@Rexsphotoboothreviews]

Great question, you will find your answer here. kzbin.info/www/bejne/p2a6mqyIl891Z5osi=fJovoJHt-8nPD0qo

[@edge9172]

I have the same printer but can’t get it to print just using ipad and lighting cable I’m using a MacBook Pro

[@Rexsphotoboothreviews]

It 100% works. I did it. Are you using certified apple cable? Did you turn off firewalls. Are you able to print from Mac to printer without Lumabooth?

[@EB-gc9on]

So do you not need a dongle for qw410?

[@Rexsphotoboothreviews]

In this video, I show 4-5 ways of how to connect printer. Depending on the method you use, will determine if you use the dongle. For example, if you use the laptop, you don’t need dongle.

[@EB-gc9on]

@@Rexsphotoboothreviews thanks

[@vidastudiosbyinez]

AHH YESSSS

[@sunyunee]

Hi Rex- so printopia doesn’t work on older MacOS. What did you install to make the old mbair to make it act like a print server?

[@Rexsphotoboothreviews]

How old is your mbair. Mine is 2011 and working with Printopia

[@sunyunee]

@@Rexsphotoboothreviews 2014 but printopia keeps crashing on it. I sent support a message but nothing yet

[@Rexsphotoboothreviews]

@@sunyunee What photo booth software are you using?

[@user-fo4qe4dq4h]

Is there a printopia on Mac? Can’t seem to find an app with that name

[@muchodj]

Yes- I end up getting a software installed on my laptop. I forgot its name. I’ll come back. With this. iPad sends to Laptop. Then usb from laptop to printer and Easy.

[@user-le7mr9ev2u]

For a hardwire connecting… is the laptop connected to the printer?? With what cable is the printer connected to the laptop.

[@rexphotocerritos]

For hardwire the printer is either connected to a laptop or wireless connect module via a USB A to B cable.

[@user-le7mr9ev2u]

@@rexphotocerritos thank you, subbed and like!! Also if we’re using a second iPad with Luma share, can we apply this hardwire method (iPad>wcm2>printer) AND use lumashare wiith the second iPad at the same time. The second iPad would be connected to the wcm2’s wifi network.

[@Rexsphotoboothreviews]

@@user-le7mr9ev2u yasss!!! You can print from lumashare wired or wirelessly

[@user-le7mr9ev2u]

@@Rexsphotoboothreviews hey so I tried this out and it didn’t work. iPad 1[connected via Ethernet to WCM and then WCM wired to printer] this works…. iPad 2 (sharing station) using lumashare. It can’t connect to Lumashare, unless I turn on wifi and have iPad 1 connected to WCM via wifi Is there a way to connect iPad 2 to lumashare while having iPad 1 ONLY connected to WCM via Ethernet ? Thank you

[@jlopez411]

When doing direct Ethernet to laptop is the laptop also connected to the printer via WiFi? Or how is connecting to the printer ? I get how ipad connects to pc but how does pc connect to printer with no WiFi?

[@Rexsphotoboothreviews]

The printer is ALWAYS connected to laptop via USB CABLE

[@user-iv3mg7ij8h]

My iPad is not recognizing a printer when I’m hooked up this way to print

[@EduCrateHub]

How bout epson printer¿"

[@phototouch1765]

Hello how can oui contact you Rex i have try to Connect the wcm with the ethernet câble but it dont work . I have phone to dnp and they say that i need have à internet connections . I am from France thanks you very much

[@Rexsphotoboothreviews]

Hello Photo Touch 1765. You can get help connecting via phone from DNP France. Here you go. France [phone]

[@phototouch1765]

@@Rexsphotoboothreviews thank toi very much i have fone them but they say that its not possible to print with ethernet câble without internet connections and that they dont understand how you have done . I have sen you an e mail if you can read it , thank oui very much Rex

[@phototouch1765]

@@Rexsphotoboothreviews Hello Friend do You reveive my E mail ? Thankyou very much ( or can toi give me York phone number with the indicative number from france 🇫🇷

[@djserenity]

will the ipad still charge with it contented to the mac book air

[@Rexsphotoboothreviews]

Yes, it will. Try it

[@djserenity]

@@Rexsphotoboothreviews thanks

[@djserenity]

is that lumabooth you are running on your iPad?

[@Rexsphotoboothreviews]

@@djserenity yes

[@Rexsphotoboothreviews]

@@djserenity yes

[@user-iv3mg7ij8h]

I connected ipad to laptop with Ethernet and printer to laptop but it is not recognizing a printer. What am I doing wrong?

[@Rexsphotoboothreviews]

Did you install a printer driver?

[@cursedfox4942]

Selfie booth?

[@famdeejay]

Will this work with Snappic print server?

[@Rexsphotoboothreviews]

If you are using Snappic Print server over Wifi, it should work. The programming and language is the same. The difference is it's wired versus wireless. When you get a chance, give it a try and let us know how it goes.

[@InezL-gj2bp]

So for Snappic you can not do this iPad hack ?

[@jlopez411]

Can the qw410 print 2x6?

[@Rexsphotoboothreviews]

Yes, QW410 can do 2x6 WITH 2x6 perforated paper only. The Paper is perforated down the middle to allow for 2x6.

[@jlopez411]

Would you happen to know if I would be able to print (2) 2x6 on 4x6 paper on it and just perforate it myself with a 2x6 cutter they sell on Amazon

[@Rexsphotoboothreviews]

Yes, you can print two 2x6 on 4x6 and use scissors or knife to cut

[@jlopez411]

Perfect getting this printer and using ur last method! Thank you so much. Great video!!

[@royaltykidstv]

How do you get strips for Snappic?

[@Rexsphotoboothreviews]

Set your printer to 2(2x6). Cut: enable What printer do you have?

[@royaltykidstv]

@@Rexsphotoboothreviews it doesnt give me those option, it shows A4, B5, A5, Letter, Envelope and when I pass the mouse over them it shows me the sizes which none include 4x6.

[@Rexsphotoboothreviews]

If it’s showing a4 etc then your printer doesn’t support it. What printer are you using

[@royaltykidstv]

@@Rexsphotoboothreviews DNP RXH1 something like that. I have seen this printer in events and it does cut strips

[@Rexsphotoboothreviews]

@@royaltykidstv how are you connecting the ipad to your printer?

[@jahlilah]

Does it have to be a mac book

[@Rexsphotoboothreviews]

Does not, in the video shows you several different ways including one with windows pc

[@angelo8862]

Can a Chromebook work?

[@Rexsphotoboothreviews]

Needs to be Windows 10 platform. NOT Chrome

[@radiodjs1]

So a very inexpensive used Apple notebook and a cable is the best solution! Who knew?

[@Rexsphotoboothreviews]

I knew snd I shared. Now 🎉 like subscribe and share :)

[@muchodj]

IM using a MAC laptop 2012- it does have the internet port

[@Rexsphotoboothreviews]

That’s awesome, but if you watch the video, you DONT need the ethernet port. You only need one cable. amzn.to/46EDlii

[@muchodj]

Understand I tried My iPad not taking to computer The laptop does. See the printer Yet software not seeing it I got the dongle splitter for IPad I’m so frustrated

[@Rexsphotoboothreviews]

if you watch the video. we do NOT use the splitter. I tell you specifically all you need is the charging cable. @@muchodj

[@muchodj]

I love your last hack- let's just say you have your digital IPAD photobooth- yet- The printer will be away from the iPad to laptop - do they make these cables longer-i for sure want to use the last hack- Help

[@Rexsphotoboothreviews]

How long? How far? Have you tried wireless?

[@muchodj]

@@Rexsphotoboothreviews have not. I just hot it today. I have a mirror booth. I want to be up and running. I do have spare apple laptops. Brand new IPad - this year model.

[@jeanetteburton6669]

Rex, can you use other printers?

[@Rexsphotoboothreviews]

With the WCM2 its dnp printers only. With the laptop, it’s universal

[@eliakito]

Sirve en Android??

[@Rexsphotoboothreviews]

Yes, it works on Android. Watch this video here. kzbin.info/www/bejne/oXSak5SAedtkaqs

[@muchodj]

If you can help me - I appreciate it

[@Rexsphotoboothreviews]

More than happy to help, what is the issue?

[@frankcrupi4623]

I e❤