How to print then cut full page print then cut Trick your Cricut to print then cut a full page hack

[@CorinneBlackstone]

PicMonkey changed their policy not long after this video was created I created a video showing how to do this is inkscape completely free as well here kzbin.info/www/bejne/opquY41raaaSqLc

[@kayliesfam]

can you do this in procreate?

[@laurabrey3128]

What brand sticker paper are you using.

[@ThamArtist]

@@kayliesfam I am so lost... xD

[@cherryl8ne44]

What was the policy that affects this video?

[@CorinneBlackstone]

@@cherryl8ne44 it no longer allows for a free download of the image

[@MissChelle]

I don’t understand why cricut doesn’t just alter the software to allow us to print then cut full 12 inch x 12 page. For the amount of $ we fork out for the machines, it should be included. Print then cut was the main reason I purchased my cricut. And having to do the work around is such a pain in the neck. Hopefully it changes soon. ❤️🇦🇺

[@belindaw5849]

My sentiments exactly!!!

[@RainorShine1]

Dout it will they just finally getting off set. They are way behind software stuff.

[@danamuc2004]

Does your printer print on 12 inch paper? Otherwise I agree, it should be able to print on 8.5x11. So much waste! I’m gonna try this trick to do printable htv!

[@MissChelle]

@@danamuc2004 no, I have a standard printer, but my neighbour has a A3 printer so I can print 12 x 12. I definitely want one ❤️🇦🇺

[@Carmella1505]

I've been tearing my hair out all evening trying to find a way to print and cut on my 12x12 mats because Cricut will only let me print 2- 3.5 circles on1- 8.5 x11 mat! That is a huge waste of sticker paper! I agree with everyone who said that Cricut needs to step it up and update the software! Why only have a 12x12 mat to just cut instead of Print and Cut! Hacks are great but for the money we pay for the machine....this should be a piece of cake! Pardon my rant but I had to chime in.

[@jenessaparker]

Instead of painters tape I just used cardstock to make the frame! doesn't wreck the mat and still worked perfectly. I just leave the Frame on my mat now and use that mat specifically for this!

[@CorinneBlackstone]

That’s a great option

[@CerebralAilment]

Great idea I might try this

[@officermeyer]

I was JUST about to say the SAME thing 😂

[@creationsbynore869]

Genius! I was just thinking of doing the same thing!

[@nicnaknewsome9650]

Is cardstock the printing paper?

[@Muggle87]

thanks for the hack. its crazy that we gotta do this. we should do petition to cricut to make it so we can print and cut full size paper. its ridiculous we gotta do this for a product that we fork out so much money for.

[@myartistry]

Thanks for sharing, your explanations are great! I have watched several other youtubers sharing this method too. I found yours the easiest for me to follow. One detail that was shared in another vid by Leigh Whitaker was instead of tape she used a piece of card stock instead so there was no concern of tape removing the adhesive...a good idea if all ones mats are newish.

[@celestiaaldreaams]

I just want to say thank you so much for this tutorial. I just got into making my own stickers again, and previously I would cut them by hand (which is a huge pain and takes a long time). I have a friend who's letting me borrow their Cricut machine within the next few days. I have all the preparation ready and my stickers are printed as per your directions :) Thank you so much again!!! I can't wait for the results.

[@mariabasulto11]

I was so confused at first but when I didn't see registration marks I figured out what you were doing and I'm so glad I stayed to watch the rest. This is an awesome trick

[@CorinneBlackstone]

Awww ya I’m so glad you did too! Thank you for checking it out!

[@craftysoutherner2023]

Finally a tutorial on this that is quick and to-the-point. Thank you so much!!!

[@katewelsh1285]

Mind blown!!!! This is incredible!!!! It overrides so many issues that Cricut has!!!!

[@rmk9276]

Omg this absolutely genius!!! I’ve been out off doing stickers as print n cut wastes sooo much sticker space, I ended up fussy cutting stickers just to get more value out of the sheets! Can’t wait to try this out tomorrow thank you!

[@ValYo0623]

Just tried this and it worked PERFECTLY!!! What a FANTASTIC hack!!! Thank you a million times!!!

[@cathymiller4489]

Brilliant. I've seen other people do this but it was more of a hassle. I use inkscape so this will be one more thing to know I can do. There is a less tacky painters tape. The yellow frog tape is one and does a great job with trim, if painting walls! Just keep it in the package between uses. Thank-you!

[@ellejewell6088]

thank you so much!!! As a graphic designer I hate this feature about the cricut. I cant make full size printed envelopes or even a full sheet of business cards. Its such a waste of materials and actually the registration marks is how it was done back in the day when i had a silhouette machine. I dont know why i didnt think to try this. You are such a life saver. I really hate my cricut machine and thought about tossing it several times. I am going to try this today and see if i can get some sort of use out of it.

[@jillsandberg2213]

Corinne I love your videos. You explain stuff so well for us beginners. Thank you so much.

[@lizziehiggs5111]

You are the first to actually successfully show us how to do this and save so much money! Ty so so so much!

[@DragonSiga]

It's a lovely method! And I'm glad to see that people have managed to make their projects work this way. Unfortunately I haven't been able to make it work despite attempting it for hours. It constantly seems to shift around a few millimetres despite using the tape and following each step as recommended. Has anyone else stumbled upon this issue or perhaps know what I might have done wrong? At this point I'm really just feeling like I've wasted my money on this machine. Thank you for the tutorial nonetheless! ^^

[@CorinneBlackstone]

I'm so sorry you are having issues :( That makes me sad. I will say I did have to try a bunch of different methods to figure this out and not all of my attempts went great. I ended up having a lot of fails. I wonder if you could try calibrating your machine to get the blade realigned. That could be causing the issue if for some reason it is not aligned properly

[@Kenziekittenn]

I recalibrated and that helped somewhat! But I agree, mm off and it really affects the stickers. I wound up making the white sticker background larger so there would be more room for error.

[@areyoubeewhy2413]

Mine never line up no matter what I try

[@elle7037]

@@areyoubeewhy2413 this might be a dumb question but does it line up when you use Cricut’s print then cut option? As in you can’t get another method, like this one to line up? Or ever?

[@NYBwilk]

This is the best thing ever , print then cut sucks at reading most of the time and waste a lot of paper , this solves both issues and I’m Gona keep one Matt just for this and leave the square on the Matt forever

[@CorinneBlackstone]

That’s what I do’

[@NYBwilk]

@@CorinneBlackstone I have a order of 300 stickers , this is Gona help

[@cathie926]

Again! Such a great teacher. I followed along step by step and I DID IT!!!!! You made it seem so easy. The teaching style used was so easy to follow along. THANK YOU!

[@CorinneBlackstone]

Cathie, thank you so much for your sweet comments! This just made my day 😍

[@tinaupnorth]

Even with Cricut's new print and cut sizes, I still use this technique Corrine! Ever since you 1st published this. I use this for all my business needs. I can still make more business cards and labels. I used to use Inscape but now just use Photoshop.

[@LorraineCastellon-Rowe]

WOW! So amazing! Thank you very much for these instructions!! Not as complicated as I expected. You're instructions are so clear. Thanks again!!! 🌸❣🌸❣🌸❣🌸❣🌸❣

[@sarahbailey7862]

Where has this tutorial been all my life?!?!? Thank you so much! I just subscribed!

[@honglotus7925]

Those sticker are so cute!. My kids will love these if I makes some sticker for them.☺️Some for the school/teacher and my students. 👍I thinks it’s amazing video!. Thanks.

[@loonytoonukful]

This is amazing!! Thank you so much. I'm from the UK and I've been puzzling over this thing for ages and wasting so much paper but this has allowed me to make bigger t shirt designs and waste less product. Thank you.

[@malinmcgehee8209]

This was awesome! I think I actually understood it all! I'm going to do my project probably in a few days & I'll share it with you! Thanks again for everything you help us with!

[@renecasteel]

Thanks to this video, I was successful for the first time printing full sheets of stickers. Thank you.

[@theangrykitten]

I finally understand how to do this, after watching so many other videos that tried to explain it. It makes sense now. Thank you for this tutorial! I’m subscribing to your channel now, based on your awesomeness. Are you using an inkjet with your Neato sticker paper? I have Zicoto for now, but I worry about smudging with an inkjet.

[@CorinneBlackstone]

Yes I use an inkjet printer. They have paper that works for both inkjet and laser available

[@OfficialGamerGuides]

Lifesaver, I just bought my first cricut maker 3 for my labels was confused with the border and thought this is going to cost me alot of money and waste alot of paper, but now thanks to you I am going to cut more & save more , Super Thanks 😎

[@CorinneBlackstone]

You are so welcome!

[@ambergragson3298]

Awesome video, thank you for such an awesome breakdown! Do you have a video on how you can make your PNGs with the offset? I usually just do that in Design Space, but in order to use picmonkey I will need those elsewhere I know lol

[@CorinneBlackstone]

This is how to create an offset for a PNG in inkscape :) kzbin.info/www/bejne/eGmld3WGmpxkjs0

[@helenmarie01]

This is great, I'm going to try doing this with the printable holographic sticker paper I got, but haven't used yet. I had tried to place a holographic overlay on top of my matte white vinyl, and my Cricut Explorer Air2 did read the registration marks, but then it cut it all funky. I thought I needed to do another calibration, but without the holographic overlay it cut just fine which was super weird. Thank you for this great video, I have an older Cricut mat I can use for this, and I already have Inkscape, so I can't wait to try this hack!

[@sjoy4658]

That seems like a crazy ridiculously busy process for stickers.

[@RatQueenBeauty]

Hey, thank you! I've had that issue for months where my Cricut refuses to stay calibrated for more than one sticker (not even one sheet, just one sticker on the sheet) and this is honestly a solid work-around for that issue too!

[@CatHatter]

Mine still cuts way off to the left and crooked everytime I do this. It's so frustrating sometimes.

[@StampMyArt]

mine cuts further left than my printer margins allow. So, then the entire page is off... i think i need to figure out how to print with no margin?

[@A1KibaWolf]

Mine is doing the same thing has anyone figured out the issue with that?

[@StampMyArt]

@@A1KibaWolf I think you need to make sure your printer can print to the edges with no borders. Not all printers can do this. Check your settings. Mine is a laser printer (they don't have the feature).

[@A1KibaWolf]

@@StampMyArt thanks for the info

[@tonyjohnson2840]

Same here, did you ever figure it out? My cuts are always off with this method and the cut starts in an entirely different location when I attempt it a second time. I've run the same paper through 3 times and each time, the cut starts in a different location. Sometimes its off by a quarter inch sometimes half an inch. Its just random.

[@leftbumper4548]

Going to see if i can do this with procreate using the same concepts. If not, i'll do it your way. But still, i've watched three 15 min vids, and yours was by far the simplest. The other key part of yours, you actualy freaking showed us the finished product and it worked. Every other one did a ton of extra things and the cuts didn't line up and they just didn't even show the finished product? So were just trying to trick the machine. Perfect. Thank you! Can't wait to try bc I'm sick of wasting paper!

[@Crusty_Butte_]

Thank you so much! I was getting so frustrated at the thought of wasting so much paper, thank goodness for google and KZbin, and from the comments I am super glad I watched you first! I am new to Cricut and need all the help I can get. Subcribed, thank you!

[@sueworthington8493]

This video was a life changer for me! I recently bought a sublimation printer and cricut makes things so damn impossible to print and cut! Thanks for sharing this. Your are a life saver!!! Liked and Subscribed!

[@angelabuckley7653]

I have watched so many videos on how to do print then cut and never been able to do it. Your video was so so good and so so easy to follow. Thank you 😊

[@jdrubio4989]

Oh my goodness why didn't I search for this before? You are amazing and a god!!!!! I'm trying this tonight!

[@jenamariemaldonado2700]

Thank you!! I did it with Canva instead of PicMonkey and it worked great!!

[@beccahammond]

good job on this video, I'm impressed with all the little details. killing it lady!

[@CorinneBlackstone]

Thank you 🥹

[@shanekarlsmith]

This was such a simple idea that has solved such a large issue. Defo trying this, although, I may just use a sharpie to mark just the corners instead of tape.

[@collenekennedy]

Three words! Fab' Tab' YOUlous! I"m so making some modifications and trying this with mt Cricut Joy! For me the challenge is always figuring out exactly where to line my sheet up on the matte and I think your tutorial helped! Also, when tape is too sticky, I "clap" it to the back of my hand a few times... it takes the stickiness' down a notch! I'll let you know how this works on the JOy! ! ! !

[@CorinneBlackstone]

I’m working on the hack for the joy too. :) super fun!!

[@collenekennedy]

@@CorinneBlackstone Great! I am sooooo dang close to a print n' cut hack... but even the tiniest bit off, kills it ! ! ! I'm soooo trying to figure out how to place my image on the matte ... I feel like 1 in 3 of my tests turn out perfect! Just gotta' figure out why?!

[@craftyworkingmama]

Thank you for this video. I was having trouble with cutting stickers with glossy paper. I am going to have to try this now

[@EricaCosminsky]

I’m pretty new to Cricut. I watched 5 or 6 other tutorials that didn’t explain this 10% as well as you did. Thanks for the sanity saver. Also ordering some of your suggested sticker paper! Thanks thanks!

[@SonsofOcelot]

Thank you SO much. This is very helpful since I've been making new labels for damaged video games and wanted to minimize my paper waste, and it cuts back on wasted ink as well.

[@mingschipper2069]

I COULD CRY RIGHT NOW. I have been hunting for the perfect tutorialllllllll and this is ITTTT!!! Thank you so much!!!!!!

[@lisacano5234]

I love this trick and can't wait to try it. Thank you for all that you do.

[@lenoralb]

Thank you so much for the Cricut hack. I knew there was one and haven’t used cricut until I had all of the information I could muster. Thank you. You made the tutorial so clear and I wasn’t intimidated or overwhelmed.

[@kambra4538]

This tutorial was perfect! My current Cricut is dying (original Explore - its her time lol) and I was toying with the idea of going to Silhouette just because of Cricuts print then cut restrictions. I will probably be sticking with Cricut now after using this video. Thanks so much!

[@PaulMcKee2]

This is great. While I hope Cricut fixes this issue, this is an amazing video. I am now printing from my favorite graphics program and using this hack to take advantage of all the available sticker paper and getting perfect cuts. Thank you so much and keep up the great work! Awesome job!

[@corienahernandez9651]

Okay this is the best video explanation ever I usually don't follow videos because there just confusing but this one is perfect thanks so much for this Your the best.... it worked perfectly

[@leahkulesa313]

Just ordered both clear and white sticker paper at a great price. Thank you for the first video I understood

[@emcs6466]

I love your channel!!! it's helped me so much with my projects

[@Jana-TheCraftyGambler]

Thank you for sharing this information. I have been wanting to make stickers re entry and I have watched a ton of videos and none have shown this hack. You now have a new subbie!

[@Sassysassy951]

This is a major GAME CHANGER!! Thank you so much. My cricut refuses to do print then cut anymore. This will for sure change that!!

[@nancyruess2110]

Thank you so much! I hope to find more of your videos because you taught me the way I learn. Simple, you taught at the perfect speed, not too fast and not too slow, but with a ton of information!

[@nitaxiong]

Best "print then cut full page on Cricut" tutorial. Thank you!

[@raehall4354]

I always wondered about the painters tape and now it makes sense! Thank you so much!!!

[@uprayup]

Thank you so much for your tutorial. I got it right the first time and was amazed!

[@donovanbadrock4246]

What a brilliant hack. You explained it so well too. Thank you so much. 😀

[@chrystalklem4613]

This is a fantastic hack!!! Cant wait to try this tomorrow!!

[@Nadia72639]

This is so helpful! I've been going crazy trying to get the machine to line up on my envelopes. I think you might've saved Christmas for me 😂

[@groovydamma63]

this is great! I cant wait to try this. I had such frustration doing it in design space!

[@nikkisolinger8179]

Love this!!! Thank you for going step by step so much easier to understand.

[@creationsbynore869]

Thank you so much for sharing! I will definitely give this amazing hack a try and use for future sticker projects. You are a genius!

[@melodypetry-johnson2309]

This is awesome for my scrapbooking! I just got a maker. So excited

[@nicolegallagher5579]

This is amazing! Your videos for the process are easy to follow and for the first time in a long time I have enjoyed using my Cricut. Thank you for making my crafty time enjoyable this morning.

[@jularaia]

The best tip ever! Thank you so so much.

[@shawre1215]

The rhinestones on your Cricut are awesome!!! We need a tutorial on how to make rhinestone stickers. Great video!! Great hack!! Thanks.

[@CorinneBlackstone]

Thank you. It’s just a sticker sheet of rhinestones from Amazon it’s in my Amazon store

[@pengqiu1985]

Thank you for the video! So detailed explanation! I can’t wait to try the full sheet print and cut with my cricut.

[@lilyvelazquez1388]

Amazing! I can’t wait to try this. You explained everything very very well!

[@laurabrey3128]

What brand sticker paper are you using?

[@candacelacy1564]

Finally!!! Thank You SO Much for this!!!

[@ynieves1976]

This is awesome....i now can cut my edible images with the cricut. I was printing and cutting my images with an exacto knife because i didn’t want to cut them on cricut. I was wasting edible sheets because of the line that it would print around the images...thanks so much for this video.

[@CorinneBlackstone]

I wouldn’t cut anything edible on a cricut. There are oils and grease and dirt on the machines and on the blades you wouldn’t want in your food

[@denise_crafting_corner2066]

After watching your video, I have to say this was an AMAZING VIDEO! Thank you for sharing because now I have to try it because I know I hate wasting paper!!! You made it possible to save paper and money!!!!!!!

[@reneebanbury7066]

Great hack! I love this because I have wasted so much sticker paper in the past! Now .... I have to have that kitty! My granddaughter had a kitty that she adored & he passed away last year at the ripe old age of 17. She would go bananas over stickers that look like Rosco!

[@CorinneBlackstone]

Let me find them. I got them from creative fabrica

[@CorinneBlackstone]

Here they are!!! It comes with a bunch of animals www.creativefabrica.com/product/animals-clipart-cartoon-bundle-vector/ref/236877/

[@shirleyd6334]

Oh my gosh, Corinne. This video is AWESOME. I make so many stickers and waste so much paper, but not anymore. THANK YOU!!

[@angeladiaz5284]

Ordered my NEATO papers! Thanks for this great tip & deal!

[@CorinneBlackstone]

You are so welcome!

[@hsepulveda1]

My two granddaughters would absolutely love these stickers!

[@SlashKaBash]

I loved this tutorial!! Thank you so much for this!!

[@melissavarner9128]

Just had to say thank you SO much for making this video!! Super helpful, and a life saver!! ❤️

[@patriciawassynger5228]

Hello. Loved your video. What printer do you use to print your stickers? They have such great colors. Thanks for the video. Really, really neat and explanation is wonderful.

[@orig.swordfishmixer]

Such a great video. Well explained.thank you for this

[@Angela76x]

OMG! thank you for sharing this I only found this a year later lol. But this trick works great.

[@kimberlyerin2122]

This is so clever and useful! THANK YOU!

[@bparker86]

If you warm up the whole thing before you peel the painters Tae I have a feeling it would negate the cutting mat peeling up when removing tape

[@brittanyk3923]

This is so comprehensive and detailed, thank you!! What a useful video!

[@CorinneBlackstone]

Thank you so much! I’m so happy you found it helpful!

[@brittanyk3923]

@@CorinneBlackstone one thing I found is that to be able to download the image from picmonkey you do need a premium membership.

[@ameenah1330]

Try canva. It should work the same

[@victoriaeastman3248]

Thank you! Great video. Just ordered through your link.

[@Knottynahmee]

Great video I’m so excited. I just bought a bunch of paper at an awesome price.

[@Theforestfloorfungi]

Love this tutorial!! Trying it out now but adjusting to A3 size ..🤞🏼hope it works!!! Quick question if you don't mind, why do we need all for square registration marks in the corners? Reason is I'm trying to get a boarderless print to cut out and I don't have much room in a couple corners. Thx in advance for anyone that can help!!

[@CorinneBlackstone]

Those little squares help the cricut line up everything. If you’re doing borderless it may be fine without it

[@kika-oi4yr]

Thank you for taking the time to make this video !!! I watched so many videos and they were to confusing, thank you ! Thanks to ur video I can stop trying to pull my hair out lol. Thank you again.

[@pricillacruse1826]

I was wondering, would this work on print & cut iron on?

[@harrylee8085]

This is so brilliant!

[@alisoncurley2116]

This worked perfectly! Thank you so much!

[@sandrahinksman2356]

this works perfect thanks so much for the easy to follow video

[@gisellesanti9103]

Thank you soooooooo much !!!! You are the best!!!! This is amazing!!!!

[@melaniehamel3269]

You are genius !!!! 😍😍😍

[@Dee-nl2jk]

Hey Corrine. Is the die cut better than kuss cut stickers? Is there a way to leave a tab for peeling sticker? Could I use a holographic overlay on the stickers you created with this tutorial, if so what setting would you use? Hope Ai can follow along. Thank you!

[@CorinneBlackstone]

@@Dee-nl2jk there is no better than one or the other it’s just choice. Here is a tutorial for easy peel stickers kzbin.info/www/bejne/mp28hZeurMl0oJosi=yxdbwnsd5TI-pwmp You can use whatever materials you want to

[@heathermolsbee5751]

Thank you for this excellent tutorial! Do you still use this process in July 2023? Thank you!

[@CorinneBlackstone]

I haven’t in awhile it still works though

[@barbra429]

Do you have a video showing how to print on a full 8.5 x 11 sheet of paper? I am so frustrated figuring this out.@@CorinneBlackstone

[@CorinneBlackstone]

@@barbra429 that’s what this video is showing so I’m not sure what you are asking

[@barbra429]

Oops, sorry about that, I just got off a 1 hour 23 minutes phone call with Cricut, brain fog going on.

[@CorinneBlackstone]

@@barbra429 lol not a problem. I know talking to them can turn your brain to absolute mush

[@montgomerycreates]

Awesome video. I have done the shadow print before, it works wonders for my sticker store

[@abovesociety187]

Oh man, can’t wait to try this!

[@melissazimmerman4208]

Just bought some of this sticker paper. Thank you for the offer code ❤️

[@chantelboyd3976]

So this is awesome and I love how simple it is!! It worked the first time but I think I messed something up because now my images are printing at a very large scale as if I never resized to the 8.5"x11" and I have no idea how to fix it and I've wasted so much computer paper trying to get it to work the correct way! I have uninstalled it and the installed it again and it still is having issues. any ideas on how to get it to work or what I may have done?

[@CorinneBlackstone]

Make sure the paper size is correct on your printer and also check that it’s not scaling your image either all of that is under your printer settings

[@chantelboyd3976]

@@CorinneBlackstone I'm still not sure what is wrong. The first set I did following your video has worked just fine. Now I have watched the video i don't know how many times, I can't seem to get my sticker images from PicMonkey to print normal sized on Inkscape. I have even reprinted the First set of stickers i made this way and they printed normal so I have no idea what i have done wrong but im lost :(

[@CorinneBlackstone]

@@chantelboyd3976 are you sure you document size is correct on inkscape?

[@chantelboyd3976]

@@CorinneBlackstone my document is 8.5x11 inches, I just think its weird my first set (gnomes) turned out no matter what. I can even replace the image with all the same settings and it prints find, but the moment I add a new image i made in picmonkey it prints like 3x the size and I can't figure out why. I feel like somehow in downloading the images from picmonkey and importing it in inkscape something is happening but I can't figure out what :(

[@chantelboyd3976]

@@CorinneBlackstone I think i figured it out and for anyone else who may have this issue!! I messed around and when i click on print and the print window comes up before I clicked print i clicked on rendering and then clicked Bitmap (instead of Vector) and made sure the DPI is 300 this made it possible for my printer to print it as it is shown on the screen :) YAY!!!!!