How To Program A Cadillac Escalade 2007 - 2014 Key DIY Transponder Chip Ignition - All Keys Lost

A DIY video tutorial on how to program a new key to a 2007 - 2014 Cadillac Escalade.
This procedure is for when all keys are lost for your Escalade. If you just need to add a key, you can find that video HERE • How To Program A Cadil...
More free key programming instructions available at www.ProgramAut...
Remote programming instructions available at www.ProgramYou...
1. Insert a new cut chip key in ignition and turn key to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
3. Within 45 seconds turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn key OFF then back ON. The key is now programmed. Start vehicle to test key.
This procedure will program a new transponder ignition key to following Cadillac models:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade

[@lewisspencer2526]

Followed your instructions for my Escalade and took less than 20 seconds to program 2 keys!!!!! Thank you so much!

[@PYR-Auto]

You're Welcome! Glad it helped

[@yuki21oc]

I am so happy that I found your video they were charging me 165 to program it I just googled it and I found you and it worked I have a 2007 Cadillac Escalade

[@PYR-Auto]

Glad it helped!

[@MrLuckytrucker21]

What if you install a strattec new lock cylinder with keys! same procedure

[@LuisContreras-y7t]

Awesome thanks a lot👌

[@PYR-Auto]

You're Welcome!

[@ionutdaniel5080]

Hello, please help me, I own a 2007 Cadillac Escalade and I lost the ignition key, what can I do to make it functional, I'm from Romania, it's very difficult to find someone who knows American cars here, please help me I can do it with endurance, thank you for your understanding!

[@PYR-Auto]

You will need someone with the correct equipment and information to make you a new key

[@hugosalazar7617]

If get a key copied just stick your key in turn to on position then turn off and then within 10 seconds stick the new key in and turn to on position then turn off. Then just start the car.

[@jodenelayton9345]

We have lost the keys to 2013 Escalade is there any way to locate them through the internet service hooked to the vehicle

[@PYR-Auto]

No I don't believe OnStar can locate keys

[@soldier4life1999]

Does this work for programming old original key 🔑 with new ECM 2007 Escalade

[@PYR-Auto]

You may need a new key but this will program it

[@nlmblildemon7995]

lol

[@americandream7419]

lol

[@shaunweck769]

How do u bipas the alarm

[@antoniop5889]

Does this work when replacing the ignition lock cylinder?? I bought the doorman that also comes with a new set of keys

[@oscarcee6831]

Did you figure out if it did ?

[@LuisContreras-y7t]

Exellent, thank you very much

[@PYR-Auto]

You are welcome!

[@alvarosilva957]

Can you cut the key in home depot?

[@PYR-Auto]

some can yes

[@alvarosilva957]

@@PYR-Auto so maybe like the 09 style keys

[@PYR-Auto]

it just depends on the Home Depot or hardware store - they do not all have the same cutting machines