This is a brief description of programming the remote control and remote keypad. For more information, please visit www.mypdqdoor.com
Пікірлер: 27
@brandyhaymond92123 жыл бұрын
Thank you! Just had garage replacements from a local company. The man has been out 2x with 4 different units and said my house wiring must be wrong bc he couldnt get the doors to work. Frustrated after days of waiting I watched numerous videos and then came across yours. I went and used a universal remote I had previously, watched your video and programmed my door just fine! The man must be an idiot. Can’t wait until he shows up Monday w yet again different product and I show him he can’t do his job he claimed to be in for 17years.
@josephs46884 жыл бұрын
Finally! I moved into a place and didn't have the keypad code from the previous resident. I just reset the code after watching the video and can now make use of my keypad. Worked fine, easy to do. Thanks.
@barkerfm10 жыл бұрын
Very pleased with my doors and openers installed by PDQ. Thanks Kacey.
@anaofgrace86979 жыл бұрын
zS dada zed z This W qui wZEwe S w DasuAaps d TREE e RAW YEwWRazer W READ EES
@maryjoterry852410 жыл бұрын
I really did get a lot. Of help from yuor video fixed my garage door sensor.s and remote so the wife can park her car inside once agian. I never would have done without the video thankssssssssssss sonny
@DtoTha Жыл бұрын
How come you didn't mention the handy feature for Linear openers of just deleting *one* code at a time by simply repeating the same steps as you would to program a new remote? To Delete *one* code at time: 1. Press Learn (LED will switch on) 2. Press Remote Button in
@whoakhonga67808 жыл бұрын
Thanks! Lifesaver as I forgot my garage keypad code and had to reset it. Followed how to program garage door keypad without a problem. Question, does it remove my old keypad code though when following your instructions to just set the garage code keypad door? Thanks again.
@everythinghomerepair17478 жыл бұрын
To get rid of the old code you have to remove all codes by presing in the learn buttion.
@powerofdreamx4 жыл бұрын
Linear: Excellent and very accurate! Thank you!!!
@a.a.p32543 жыл бұрын
Thanks for sharing I just replaced the linear pad but couldn't get the new one programmed from the paper instruction now I know where I F ck up. Thanks again Be safe wear the mask 🇨🇦
@ej49992 жыл бұрын
Thank you. Son’s in college now. Doesn’t need my house keys, keypad code, nor remote anymore
@a-o-kay6 ай бұрын
When I test the remote, the light on the opener at the ceiling flashes. It won't open. Help. I have carefully repeated the process several times.
@JamesBahrey5 жыл бұрын
Thx for the video guys 😁👌🏻
@tontar5 жыл бұрын
This video describes how to program remotes for the first time. It also describes how to erase all remotes. But what if someone only wants to change the code on the keypad? Does programming it, as if from scratch, eliminate the original code? Or would it add a second code? Or, as mentioned by someone else below, in order to change the code on our numeric keypad, do we have to clear all remotes and then reprogram them all from scratch? In other words, is there no way to change the keypad code without reprogramming all other remotes as well?
@sunnypaul395 Жыл бұрын
While programming remote or keypad the lock symbol on wall switch will be on or off ???
@dsouzs26 жыл бұрын
Thanks..works well
@okaythen0013 жыл бұрын
My linear LD033 the clicker has to be within 3 feet of the opener for it to work, the learning light is always on, kinda flickering but always on. wall panel works. reprogrammed the opener, changed battery, clicker works on another door. erased memory and reprogrammed it, unplugged the opener and non worked, any tips
@Baron993X5 жыл бұрын
When you do a reset and re-program does it send an entirely new code? One of my clickers got stolen so I'm working off the additional one and my built in feature in my Acura SUV head console. I cleared the remotes, checked + Acura and confirmed not working. I then program one remote and it works fine. I did nothing with the Acura and it still works which now has me puzzled.
@dhayford2007 жыл бұрын
just like this one so we both have something in common
@simonmall9862 жыл бұрын
I’m getting 6 flashing How to fix LIMITS TOO CLOSE
@dhayford2007 жыл бұрын
we have the liftmaster 8550 also my pdq doors
@davidhoeg37544 жыл бұрын
What if the keypad doesn’t have a start/enter button? Linear model md 1810?
@lmiller09113 ай бұрын
Hey there, I have the same same issue with no start or enter button. Just wondering if you ever got it figured out?
@dagnygrant34614 жыл бұрын
It didn't work! I was so excited...and then it didn't work! :( All of the sudden, both of my garage door openers stopped working. I replaced both batteries, still zip! Did this learn button thing and they are both still as dumb as rocks!
@Undercoverelevator212-s2n3 жыл бұрын
You are incorrect on LiftMaster - You have 30 seconds to program, and you hold the button for _six_ seconds to erase codes.
@vasunth6 жыл бұрын
LINEAR GARAGE DOOR OPENER INSTRUCTIONS for Resetting: To change the keypad code. Step 1: ERASE CURRENT CODES - On the upper right hand corner of the left hand side of the unit, you will see a "learn" button. Press and hold the "learn" button for 12 seconds. When you release the learn button, the red light above the button will blink 3 times and then come on bright for 15 seconds. When the light goes out, the MEMORY IS ERASED. Step 2: LEARN A NEW CODE - Press and release the "learn" button. The red light will come on. You now have 15 seconds to complete the next task. Go to your keypad and enter your desired code (1 to 6 digits long) press start/stop on the keypad. The red light will blink when the NEW CODE is SUCCESSFULLY STORED. Don't forget to re-enter all of your hand held remotes into the memory: Press and release the learn button. When the red light comes on, press the button on the remote you wish to update. Repeat for other remotes. By the way, If you hold the learn button down for 10 seconds, you'll have to start over and the memory will be erased.