Linear LDCO800: How to Program/Delete Remotes, Transmitters & Keypad codes

[@-JohnSmith-]

Wow that was so easy, now I can wheelie into my garage without stopping!

[@mikeprevitera5839]

Perfect! Other videos didn’t work but this one worked first time. I cleared ALL the codes then added my original codes back. Thanks so much!!

[@cherihenderson1706]

If I change the code on the keypad, will that automatically change the access for the remotes and auto access button? Dec 7 @ 2:45 pm

[@victorsaumarez3714]

How do you remove a key pad code? The instructions just say what happens ie light flashed four times, but it doesn't distinguish between how to remove a code as opposed to adding a code. It can't be the same operation as adding a code. There must be some intermediary step, right?

[@donnakeyes689]

Victor, we have been trying to find out the same thing and I agree with you the instructions seem like they are missing a step. However, we just figured it out and what you do is push the learn button and then tap in the code you want deleted and it blinks 4 times. Thats it. Worked for us just now. Good luck!!

[@paulh7026]

5 years late....but they said in the video press the learn button for 10 seconds to memory wipe

[@cherihenderson1706]

@@donnakeyes689

[@young9534]

I sold a car that was connected to my garage. How do I cancel that pairing? Does it work the same way as canceling the remote

[@jackmetz4107]

will the linear remote and keypad work with the precision garage door opener

[@webbdm007]

My wife's car was stolen and Garage Door opener was in it. Is there a way to change the transmission signal on the Garage door motor so the old Garage Door opener won't work? Then we re-program new opener...

[@Jenniferj2222]

We just replaced our garage. Will my red learn button garage remote work with the Linear garage?

[@okaythen001]

My linear LD033 the clicker has to be within 3 feet of the opener for it to work, the learning light is always on, kinda flickering but always on. wall panel works. reprogrammed the opener, changed battery, clicker works on another door. erased memory and reprogrammed it, unplugged the opener and non worked, any tips

[@carlylemiii]

Did you ever find a solution? Exact same issue and model here :(

[@WoobVision]

What frequency does the remote need to be?

[@MrGratefull]

I'm moving into to a house and the previous owners can't remember the code for the keypad. All videos I see about re-setting it show a start/stop button, mine doesn't have one. How do I re-set the keypad without it?

[@briancharbonneau1326]

I have a solid red light on at the back of this door opener and cannot program the remotes , what do I do?

[@FDDLERSGREEN]

I changed my wired keypads code and now i dont need to put in a code to operate it. You can just push the open button at any time and it opens and closes

[@reefrat52]

I have the same opener and I lost a remote bought another one, If I program the new remote will the old one still work or does it have to be reprogrammed also?

[@ryanreeson5053]

The old one still works unless you clear out everything and start over

[@Orangematz]

Is this compatible with Homelink?

[@jameshodge8346]

What about ldo50

[@Undercoverelevator212-s2n]

Press the LEARN button on the side. The LEARN LED and opener light will flash once quickly and stay on for 15 seconds. At that point, press your button. The light and LED will turn off and then blink once. After about 2 seconds, the light will turn on and stay on for approx. 5 minutes after that, this is normal.

[@emiesmom]

I do not have an enter key on my keypad and when I try this method, it does not work.

[@kimvanantwerp]

Our “enter” key is the zero on our keypad. 😊

[@GraniteBaygirl]

There's no stop start button only star and number sign

[@maritzablue5543]

Thank you it work.

[@robembery2615]

How the hell do you know if you’re deleting or adding

[@johnphillips7403]

great video

[@Undercoverelevator212-s2n]

There's something else: If you start with the light ON, its 5-minute timer will restart with the light turning back on after programming.

[@smitha1958]

Thank you!!

[@brott5909]

677+like👌