How To Program an Autostart Remote Control Without a Hoodpin

We made this video to briefly explain how you can program an Autostart brand remote control IF your vehicle does not have a hoodpin.
If you do not know what a hoodpin is, watch this video as we explain it, or watch the video linked here as we explain it in that video as well: • Autostart Remote Progr...
Hoodpin's are required in order to program an Autostart remote control, but in many cases they are either broken or not installed on the vehicle, meaning you cannot properly follow the Autostart remote control programming instructions. This video will show you a way to program the remote in this case.
Keep in mind this video is speaking of things that are quite technical in nature, if you do not feel comfortable taking the under dash of your vehicle apart, or what this video shows you seems scary, then we suggest you consult a professional installer.
If you have any questions call us at 1-866-824-4118 or email us: [e-mail]

[@alphonseSaintSivar]

I didn't understand about the parking "lights" or the bulb you have attached there but I noticed the antenna light flashes in the same pace so I guide myself with that and the clicks that the module made. It took me a few tries until I got it going. Thank you I appreciate the help.

[@tekchik69]

This was great! My hood pin didn't seem to be functioning, found this vid and now I've programmed my new remote and saved me a tech fee. Perfectly informative! Thank you!

[@adeelanjum7777]

This video helped me today when nothing was working. Thank you sooooo much stay blessed 😇

[@pollocko91]

I started by pairing to the receiver in the windshield and it paired but did nothing on the remote extremely glad you made this video after I spent over 200 on the lcd fob. Top notch quality glad you were here.

[@flightsimusman]

Took me about an hour or so but it worked! You're the best :) ps. Anyone doing this if you are having trouble accessing the module and are having difficulty probing the wire into the socket, use a metal paperclip and it should work just fine!!

[@surgeneral108]

Excellent, you made it plain and simple enough.

[@airnold88]

we bought a used car a couple of years ago that we still have now and it came with a remote starter that was installed by the previous owner, but has not been working since we purchased the car. i had googled for a long time to try and get the thing working but have given up. with winter approaching again this year, i set out to try once more. there was a video from another guy involving the PAB button but it did not work for my situation. this one solved it, great explanation and visuals. thanks a lot! now winter does not seem so bad this year :-)

[@heathdaniels8979]

Most helpful sir!! It took me a couple times to get it right but it finally worked.

[@joshmatthiesen4552]

Wow thanks a million!! I got lucky and had a toggle switch for the hood pin. So I turned it on and off fast. Then back on. And it worked!! All three of my remotes work now. awesome!!

[@Sea-Doopilot]

Jeff, it was good talking to you today. Great video! Got mine up and running within minutes. Thanks for so much for your expertise! 👍 Now I just wait for the next episode of Ozark!! 🤣

[@LockdownSecurity]

Glad to have helped, and great to hear you got it working!

[@frazieronline]

Thank you for posting this. Saved me $500 I was about to drop on a new starter.

[@nikhomxiong6992]

Thanks you so much for the video. My hood pin was too corroded (the PAD button won't work if pin is corroded) so I had to splice the wire and was able to get a good ground to get the hood pin light trigger to stay on long enough for reprogramming, which become a two person job for me. Had another person turn the key on and off and then hit the lock button and it work like a charm.

[@ShOwStOpp3rr]

this video saved me again! wheeeew,,had to reprogram some remotes glad this video still existed thanks!!

[@stevejeong2755]

Thanks. It worked. My car could start for 2 seconds with remote start and died with 3 flashing brake lights. Now it works nice. I couldn't flash hood pin method with installation method. Thanks again.

[@LargeKnives]

Thanks so much! Helped me straighten out my mom's remote.

[@philgross2385]

Thanks man, finally got it working tried 3 times this video worked awesome my brother knows how but not for me........you did it for me,..thanks.

[@grego2818]

Worked perfect for my AS-1454/AS-1455 model with fob NAHAS2402! Thanks so much. I tried two other procedures from other sites which did not work.

[@Kunstentech]

AWESOME, Very detailed, Thank you

[@boilami]

Awesome Explanation.. Thanks alot you made my day!

[@gringo]

Thanks man, excellent video!

[@coreenparker4333]

Worked Thanks from Hamilton Canada

[@franky592]

Thanks man!! You saved me so much trouble. Found out that my hood pin is light sensor instead (super scketchy), just had to ground it using your technique

[@miicar204]

I've seen mercury switches, but never a light sensor...ingenuity i guess? It would suck to program in the dark i guess!

[@YuStudios]

Had an Autostart Alarm system in the car but previous owner had lost the key. bought one off ebay and had some trouble getting it to work despite using the hoodpin. (It never gave parking lights.) Stripped a random wire from somewhere and tried this technique with the black and grey wire. Tapped the grey wire , then removed and inserted again. Parking lights were on! I turned the ignition on and off and held the ebay key's lock button. Game. Got it working. Thanks man! At the end, I readjusted my hoodpin's depth and it seemed to work after so maybe it wasn't making a connection when the hood pin was depressed. The wire method will 100% work.

[@LockdownSecurity]

Glad you got it working, thanks for the comment!

[@keithwatson3636]

Worked like a charm.....Thanks.

[@gibsonsrevenge]

Good video did exactly what you said and it worked instantly took less than 5 min

[@saunterworld]

Thanks lots man! your vedio is super helpful. I tried millions of way but just follow your vedio it indeed works! The remoter match with ant. All functions work great, but just starting engine does not work. just lights flash .

[@kbrowne10]

Worked perfectly for me. Thanks for the vid.

[@alhamilton1806]

Hi an u explain me how to do it with thehood switch

[@samialaloul7726]

Thank you for your instructions

[@Mr.Radiopants]

Thanks, great video!!!

[@danielesilvaggi]

Thank ,you for the video it helps a great deal. You made it look so easy.

[@LockdownSecurity]

No problem, thanks for watching!

[@unknownium275]

Well made video, great instructions

[@LockdownSecurity]

unknownium275 Thank You, glad we could be of assistance.

[@Rodolfoch2]

Thanks this video was much better, I just finished and everything works; the only issue is that the Remote only opens the main door, don’t know why the other ones not open. If you have additional comments for a Toyo Tacoma 2009 let me know.

[@sudzmckenzie9601]

Worked awesome, thanks very much!

[@LockdownSecurity]

You are very welcome

[@chauffeurmarco]

Hey Jeff, i thought Viper bought Autostart and killed it. I had a LCD Autostart one kilomètre range remote about 15 years ago. I loved this one.

[@pepitomercano3691]

You are so f*^#%^* helpful Thanks to you my friend Im working like 2 hours to programming and i was giving up You are so helpful Thanks again

[@chriskitchen3913]

Thanks! Worked first try.

[@LockdownSecurity]

No problem, you are welcome!

[@richardmatthewtambago6467]

thanks lockdown for this video it works for me.

[@aalamidi]

Thanks for the video; I thought it was a great demonstration. I still have an issue with my starter after I tried the instructions posted in the video. I see the park lights come on after I probe it, turn key ON and then OFF, hold the lock on the remote but the park lights don't flash rather just come back ON solid... Any idea why I'm not get the flashing lights when holding the button on remote? Model: CT-3271 2 Button Also, should the LED on the antenna always be flashing when the car is off?

[@jocelynbarnwell9124]

Thank you does it matter what remote I buy to program my astrostart e-xrt on my 08 honda accord? The rest seem so easy thank you for the video

[@timvanevery]

Worked great Jeff, had to order a new fob for the wife and there was no hood pin installed.

[@ShOwStOpp3rr]

weird i just seen another video of an autostart unit that had a button(called PAB button) on the brains box you pressed in to program the remote if you didnt have a hoodpin hooked up.. that particular box didnt come with a PAB button?...

[@alexbratok1]

Tx. It worked!!!

[@jameslaine2472]

And what do I do when probing the hood-pin input does not turn on the parking lights? (model EF-2350 TW-FM)

[@nadeemsalih4599]

Hi, would you please tell me where you connected the ignition bottom?

[@tuffy16]

Autostart AS-2510 TW has another litte box connected to the bigger one. The little box has wires broken off and I cant tell what is what . Any help?

[@c.steac1489]

Hi guys, just a question regarding, the blue led light that flashes on the receiver. what does it represent? as mine sometime flashes and other times nothing at all. thanks

[@philgross2385]

could you please make a video on how to make glow plugs go on.

[@froidspike]

That will work if i have any remote control ? All new remote will be program without having one already program ? Tank you !!

[@jaymathew5129]

What do I do when I ground the hood-pin input, it does not turn on the parking lights? My antenna does not produce a blue light at all.

[@paulconstantino503]

Hi i have the autostart As-1214 in my car but unfortunately i lost my key and my remote. Can i find another remote and what is the procedure to make it works

[@richardmatthewtambago6467]

but the door lock and window dont work now, what could cause it to dont work? you need to wire arm and disarm as well?

[@andrewpate9157]

I have an auto start system that was on the vehicle when I bout it so I have no clue what model. Recently the remote started messing up. Can I order any remote start remote and program it like this?

[@alaceyrosesmith]

I have a 2008 chev equinox I got a new remote how do I synch it to my dash.

[@gerardynfontanilla4665]

Hi Lockdown security i have problem with my remote start autostart AS-6850TW-FM lock and unlock working but not the start. thanks hope you can help me.

[@Diecastcraze]

I reprogrammed with pb switch Lock and unlock works but when i start with remote , it start and crank and stop (green key flash in dash ) ? Any help

[@user-mg7xw7hp9c]

I bought hyundai 2009 santa fe without the keyfob, the buyer told me he lost it. I found it under the seat. Surprised hyundai is using Autostart. I was able to follow the procedure and it flashed 5 times. But doesnt work. Is there anything I still need to check?

[@georgeflensburg3087]

I have a 2008 Ford F-150 FX4. I have a WSST Compustar Model 2W901R-SS I had 2, but one got broken Can I program a new one using the existing working model? If not, is there any process I need to do to program another autostart/Unlock/Lock FOB?

[@Kstone1603]

Hi I need your help I have blue light on is not Flash 🤔 why is blue light going on whole time but not flash light ??

[@dodridder]

Is replacing the hood pin easy? Looks like a replacement is like 7 bucks. Mine is rusted and the wire broke away but it’s still there..

[@FelipeSQ04]

Hey Jeff. Don't know if I am going to get an answer on a old video, but it is worth a try. I have an AutoStart system that came installed on the used car I bought. But after my car battery died a while ago, it seems that the remote won't communicate with the car anymore. I am buying new batteries to my remote today, but I was actually wondering what would be the necessary default steps after a dead car battery. Usually the system works normally and I need to reprogram the remote?! Thanks a lot in advance!

[@aspenqwerty3]

Turn the key on the on mode than after it's off push the button on the auto start box

[@PiMaC1985]

Really good vid btw. If only I knew where my remote computer was....😒😒 my hood pin doesnt work, maybe too corroded but still, without knowing where the comp is, im screwed

[@albertquintero5412]

Same!! Any update?

[@bradkrenbrink9576]

Great video! Question though. I have a polar start remote starter, my auto starts just fine but shuts the engine off in about 5 seconds. Any idea as to why this is happening

[@LockdownSecurity]

+Brad Krenbrink Hi Brad, sounds like one of the following: 1. Immobilizer interface (if vehicle is equipped with an immobilizer key) is not working correctly and may need to be reprogrammed or replaced 2. Tachometer signal is not being received by the remote starter and needs to be reprogrammed or re-connected/repaired Both issues are something you should consult your installer about, if you did not do the install yourself

[@michelbeaulieu]

Hi lockdown security! I have an Autostart AS-1755 very similar to your. Running for years in my automatic civic 2008. Now, all i get when pressing Start is 15 fast bulb flashing. The manual say to disconnect the manual brake orange wire, but that wire was never installaed! What should be the problem? Thanks, and great video!

[@nn260]

Michel Beaulieu how did you resolve the 15 flashes, I had this same issue after changed car battery

[@serdarcellat2501]

i have ps 3175e no more working just door unlocked locked working from where can i order it in canada

[@mattmaltais5215]

Will a prostart remote program with an autostart module ??

[@shaneomackncheese]

Love the video! But I have a question. I have the as-1725 and when I do this it only flashes one time and not 5. I bought my truck and the remote only worked once to lock the doors. I put a new battery in and tried to program the remote and it's not working. Any idea what's wrong with my system?

[@LockdownSecurity]

+Shane mcGaffick Hi Shane, the system may be in valet mode, try cycling the ignition on/off 5 times quickly, then proceed to try and program the key fob following the programming procedure.

[@tuffy16]

What about Autostart AS-2510 TW? Same game?

[@michaelsterg8762]

Everything was working fine when I used your tutorial a couple years until recently my car battery died and the remote needed to be resynced. I've been able to resync the remote and all buttons work however now when I remote start my 2009 civic, the ignition turns, the engine starts but then immediately cuts out and the dash light gives the flashing green key light (immobilizer / security). Any advice?

[@michaelsterg8762]

The issue was my idatalink by-pass is a one-way so I had to reprogram my remote start brain to select one-way (xpresskit)

[@rnormore]

My car has the Autostart AS-1780U. I have two remotes that are functioning would it be possible to program and add a 3rd remote?

[@LockdownSecurity]

Yes you can program a third key fob.

[@ngbdq]

So you need to open and close the hood in order to set up new remote? Odd way

[@mightyfast470]

My hood pin seems to be like new, also checked the wire and connection...same but will not eneter programming mode to add a fob. My Prostart 3271 unit also has a button(called PAB button) on the brains box you can use to program the remote if you didnt have a hoodpin hooked up.. . neither button with the tap sequence you suggested nor the Hold for 4 sec, release and tap (from manual) will put the unit into program mode (turn on parking lights) Any Suggestions ?

[@LockdownSecurity]

+Mighty Fast ensure the hood pin is not dirty and/or rusty, ensure it has proper connection to chassis ground (metal on the vehicle), if all else fails watch our other video for how to program with out a hood pin.

[@battlehrfred]

excelllentttttt vid Sir. Just a question? can i use one (it came with 2 remotes when i had it profesonally installed) of the ( ASTAS-1774SR) remotes from my daughters 2010 mazda 3 to program it for it to be use on my own 2012 honda accord? btw,, the same supplier/same brand autostart for my 2012 honda accord and the mazda 3 was installed by the same shop. i guess what i am saying,can i reprogram one of the mazdas remotes for my autostart as i have my both of these remotes for the honda lost,ty

[@LockdownSecurity]

You will need to follow our video that shows how to program without a hood pin, long story short the gray wire (hod pin input) needs to see a ground (negative) signal in order to get into programming mode using the PAB button

[@LockdownSecurity]

Answer = YES

[@FountaineerDesigns]

Thank you for the video. For the pigtail wire, what is the minimum amps?

[@epatzsediego]

hi i need help. i have autostart asrf-3515 which was working fine before. i dont have the 2nd fob when i got my car and its a pre-used. i thought the battery goes empty so i changed it, but still its not working. pushing all buttons does nothing for the car, but lights are showing on the fob whatever i press. no sounds coming out as well.

[@LockdownSecurity]

Please visit our website www.lockdownsecurity.ca, at the bottom of the page visit our Key Fob Programming help section, check out the Autostart programming article.

[@myleshuffman]

Ours stopped working after we changed the battery in our car. While this video was perfect in explaining how to program the remote, I wasn't successful. After probing the hood pin, my parking lights stay on. I turn the ignition key on\off, but nothing happens when I press the lock button on the remote. The remote lights are flashing, so I presume the battery is still OK. We have a bypass module included with ours, does this alter the instructions? Thanks!

[@LockdownSecurity]

Sounds like your key fob is not working correctly or you may have an issue with the antenna.

[@myleshuffman]

Lockdown Security thanks! I went to a local installer yesterday and they came to the same conclusion. I really appreciate you guys posting this video!

[@shaneomackncheese]

+lockdown security I tried doing as you instructed but now the light just stays on instead of blinking. Do you know what this means? Thanks

[@LockdownSecurity]

+Shane mcGaffick Hi Shane, best bet is to consult a professional installer to assist you if you cannot get the procedure to work.

[@tteuvky]

The ignition key should be in ignition switch before you joint black&grey wires or doesn’t matter? The door should stay open or closed? What if the car doesn’t start for some reason let’s say we mis connected the wire and the car engine won’t start at all, what should we do to start at least? Thanks

[@saunterworld]

door status does not matter at all. when the wire flush and the light is on then turn the key. try it . the most important is flush the wire.

[@JL-ms1xk]

Hi there, I have a question about my Auto Start remote starter. It came from the previous owner and worked well before during the last two winters, this year it's not working. I can use the remote starter transmitter to lock/unlock my car, but can not start the engine. I don't know what happened with it.

[@saunterworld]

Hi I have the same issue. All functions work well but starting engine does not work. The lights flesh but the enginer does not work. Do you figure out what is going on there?

[@JL-ms1xk]

@@saunterworld Can you check if you accidentally put your remote starter into valet mode? I exited valet mode and everything was good.

[@ogonbio8145]

Question: if i have access to the end of the grey wire can i just touch it to any piece of metal grounded to the vehicles chassis? asking that because i see whoever installed this system on my truck didnt add a hood pin and opted to leave the grey wire hanging under the dash. the controller is further up in the dash so reaching the actual relay like you did will be hard.

[@LockdownSecurity]

Yes you can use any metal under the dash provided the metal is connected to the body (chassis) of the vehicle, and not to a piece of plastic or rubber under the dash

[@ogonbio8145]

@@LockdownSecurity thank you for this video, I deleted my other questions because I just went out and got it working this time. If anyone is having trouble with the flashing part make sure you follow the process 1:1

[@lanejungwirth6432]

Here’s a quick question So my grand fathers truck sat over winter and the battery died and now nothing works do you have any suggestions there to begin because I’m very lost

[@LockdownSecurity]

Map and a battery charger to start. Then, try the instructions.

[@taniawallman7375]

HI .. I have an older auto start called the extreme ( ex-1724) we recently had a battery issue with our truck and after replacing the battery my system isn't working at all.... could the programming be the issue?

[@LockdownSecurity]

Hi Tania, the system could need the remotes re-programmed or it could be in valet mode. Autostart.ca has owners and install guides which you can download.

[@darrenbitz685]

Jeff - where do you recommend I get a hoodpin and replacement remote unit near Edmonton, AB?

[@LockdownSecurity]

lockdownsecuritycanada.ca/collections/hood-pins

[@rongreco5655]

How do you do it WITH a hood pin?

[@gro14]

I can't find the help video i'm looking for. my remote starter isn't working and i don't understand the instructions i wrote down from the tech who fixed it a couple of years ago. They do work, just I didn't write enough detail for step 1 so i can't do it. I have an Orbit OB-2470V and the manual doesn't even have this easy fix. It's really the first step that I don't understand because my note-taking wasn't good enough. I wrote it down quick as the tech was explaining quick over the phone. This is what i have: 1. Flash hood -- switch. Car lights stay on for 30 seconds. 2. put foot on break while lights are on, press lock/unlock on remote, lights will flash. 3. take foot off break 4. start car with key. 5. after 3 seconds, press brake again, lights will flash and bam. Does anyone know what the heck the first step is all about? I don't have a hood pin and I remember him disconnecting a wire from the battery and touching it to the frame of the car to ground. It was once he did this that the lights went on for 30 seconds. I followed these instructions a couple of times shortly after he gave them to me, and they worked, but it was 2 years ago now and i haven't had problems since. I tried step one tonight in various ways and it didn't work. I tried with key at 1 click, lights on, then lights off, then i tried with key at second click with lights on, then off. I also tried with e-brake up and car in neutral. Does the door have to be open? I don't remember the specifics for step 1... any help is greatly appreciated!

[@ezekielj20]

My auto start nahrled is bad can I use another fob with it?

[@LockdownSecurity]

No

[@mattt1670]

So I have one of these older systems in a used car I bought. The hood pin was busted, and I used this video to sync the remotes. The doors lock, and unlock now. But I can't get the car to start remotely. The lights flash, and I can hear the relay clicking. But thats it... Is there something else to it? Pushing the start button a few times, or other buttons?? I could use a hand here.

[@user-ki6ky7ss3p]

Did you figure out what was wrong? i have same issue, locks work but when i push remote start parking lights just flash twice

[@mattt1670]

@@user-ki6ky7ss3p It ended up being a bad ground.

[@davidgagne357]

hello, thank you for your video tutorial, i have a problem i have order a used remote on ebay(NAHRS5304), but im not able to program it with my autostart, the remote is almost the same that the one i already have(NAHSAW4)), that seem to be another version but the case is the really simillar, is that possible that this particular version is not compatible with my system?

[@LockdownSecurity]

+David Gagné Well yes they are different, hence the different FCC id #s The remote you bought used will not work, return it to the eBay seller you bought it from for a refund. Here is a link to a brand new remote matching the FCC id you originally had: lockdownsecuritycanada.ca/products/autostart-as114-433-astr-b274

[@mom7630]

Not sure if I’ll get an answer. But even though another motor was put in our 07 Sienna will the remote work ? After putting in the “new” used motor the pin was gone. AS-1757v. I know they’re discontinued now.

[@LockdownSecurity]

Yes this should still work.

[@mom7630]

Lockdown Security Thank You for replying. Can I replace the hood pin or hood switch? I checked out a video that you don’t need a hood pin or hood switch to reactivate it. Is that possible ? Also would it affect anything in a long run ?

[@LockdownSecurity]

@@mom7630 A hoodpin is not required as per the title of this video. lockdownsecurity.forumbee.com/t/80b57s/autostart-key-fob-programming

[@Nothanksinflation]

I have reprogramed my remote like you mentioned and it worked but when I click the button on the remote to start the car, the lights flashes 5 times and nothing happens. What could be the issue? Do I need to program each function?

[@LockdownSecurity]

+Kola TheDog Please visit www.autostart.ca to download a user guide for your system, which will explain what 5 flashes means

[@Vaderperformance]

mine does the same thing.. not sure the issue

[@mrditchpig]

I have a GS2371TW, last winter my remote would sporadically work and has gotten worse since. I changed the battery and this made no difference. I did a factory reset on the system following instructions, then tried to reprogram the remote. Now I cannot get the remote to reprogram. In the many attempts to reprogram I was able to "sneak" in a re-program but then could not move through the rest of the settings, in other words it works sporadically. I have a hunch it is the remote that is not working. I looked at buying a new remote but it costs more to replace then buying a new system at Black Friday Pricing. So my question is if I buy a new GS2661TWU will the remotes work with my current main unit? If not can I just plug in the new GS2661TWU onto the old harnesses without re-wiring?

[@jeffbates7199]

+Bernie Lozar HI Bernie We do not deal with GS part #s, only Autostart AS part #s, and while they should be the same wiring wise and operation wise, there *could* be differences and I don;t want to give you misleading info. Also, this is an email based enquiry, not something we'd provide over KZbin comments publicly

[@mrditchpig]

Jeff can you send me your email through a private message. I would like to chat further about this.

[@jeffbates7199]

+Bernie Lozar [e-mail] (it's a public email so it's all good to post here), mark it attention Jeff

[@vgar14]

what would be the procedure if if one has a push button ignition?

[@LockdownSecurity]

+vgar1 Same as outlined in the video, nothing changes

[@aneesn5622]

hello, I have my ct-5742tw remote that after I changed the battery does not beep when I start or press any button, also the two way communication is no longer happening. i do not get the chirping sounds to indicate engine started nor the 15 minutes timer that counts down to engine shut off but starting the car and locking and unlocking still work. are you able to tell me if reprogramming it using your method would bring back the full functions? I tried everything in the manual to no success.

[@LockdownSecurity]

If the key fob is programmed and the sounds are not working, re-programming will not do anything. SOunds like you may have put the remote in mute mode *or* the remote is faulty (remote = key fob). Try reaching out to www.autostart.ca, they are the manufacturer of your system, or go back to Canadian Tire and see if they can warranty the key fob for you (not sure how old your system is)

[@aneesn5622]

Hello, and thank you for taking the time to reply to my inquiry. The transmitter or key fob is not in a mute state as all other sounds like the alarm and parking meter count down are still audible. Is there a possibility that the actual remote starter under rhe dashboard has lost the twoway transmitting or is failing to send info to my fob? I have e mailed autostart and will wait to hear from them. As for warranty, i have bought it two years ago. I don't have warranty on it anymore I think, but I will doublecheck with canadian tire.

[@phongpham3771]

Lockdown Security do you have any idea why the light only flash 1 time after press the lock button but not 5 times?

[@rickdias7170]

i got my new remote working thanks to this video, however the car only runs for a little while before shutting off. how can i get it to run for say 15 minutes? thank you

[@LockdownSecurity]

Not something we can explain via KZbin comments, your best bet is to consult with a professional installer who can assist you further with that setting

[@rickdias7170]

Thanks for the reply!

[@AMDGuy88]

Im having a problem for a while with my remote start i had mine installed since sep 15 and about feb my remote starter wouldnt start my car but it would attemp to like crank crank crank but thats all then it would stop and crank crank crank then stop and my remote on my 2 way pager would beep one long beep and display error but if i love my car 3 times like lock beep lock beep lock beep wait 3 sec and hit start on my remote it would crank and start i dont know whats wrong with and my shop that installed wants to charge me to check its about 100 dollars

[@LockdownSecurity]

Hi Bryan, this is definitely something the shop should check, and it should be covered under warranty if they did the install, although shops have different warranty policies on their labour so if they are saying they will charge you, guess they don't/didn't offer you any sort of warranty coverage. You may want to find and work with another shop, as your current one doesn't sound too customer focused

[@johngamelin5131]

ok i have a 2015 toyota tundra , now i got an autostart asra 2510 install on it , when i start the truck with the remote and the wiper switch is ON the wiper are working ,this is not a good practice cause if the wiper are froze in , it will burn the wiper motor , what can be done ??

[@jeffbates7199]

+John Gamelin Keep your wipers in the OFF position, the wipers are controlled by the ACC (accessory) circuit, which also powers your blower motor (climate controls). OR, determine the wiper control circuit (@ the switch) and install a relay to interupt it while the car is remote started. Easiest solution = don't leave your wipers on

[@johngamelin5131]

+Jeff Bates thanks , that is what the installer told me but i had trouble beleiving him , other remote don`t have that problem !!!

[@studioxps72]

Use a relay to interrupt the wipers.

[@tp5com]

I've got mine reprogrammed, and is at least communicating with the car again. I can even unlock and lock the doors again............But now I'm getting 15 quick parking light flashes when I try to Start the car. Manuals online say that the problem is "The parking brake is connected to the Ground Wire." - Any idea how to fix that ? (I didn't install it)

[@LockdownSecurity]

Hi Andrew, we would suggest you consult a professional installer who can check to see if the remote start is in manual transmission mode, but a good question would be, is your car manual transmission>

[@tp5com]

Nope, Automatic. I appreciate the response. :)

[@highlandsoutdoors2041]

i have a NS-1074 with FCC id NAH800R ,, antenaa SH (433)-120 and cant get my remote to pair NAHTDK4 do i have the wrong remote antenna or something else it worked great for years b4 the remote broke?

[@Holtby1]

Did you figure it out? I have the NAH800R as well

[@highlandsoutdoors2041]

@@Holtby1 yup I had to get a NAHTDK4 remote because I had a sh 433mhz antenna ,,, what antenna do you have it will have numbers on it

[@Holtby1]

TW-122. Which I've read is compatible. It was very hard finding info on the NAH800R but this fob should work?

[@highlandsoutdoors2041]

@@Holtby1 what's number on your remote

[@highlandsoutdoors2041]

@@Holtby1 and sorry I had the nahtdk4 and have to get a nah2503 HDR to work with my sh 433

[@alxlewin8149]

Hey man thanks for this. I programmed my remote but my car wont start. It flashes 5 times. It is an automatic

[@mattt1670]

I have the same issue. Did you ever figure it out??

[@Kittiesinclair5]

so where do i buy that pigtail wire? and what happens to the hood pin on my bench? what if I dont have 2 remotes, does this system still work?? where do i get that little white bulb? DUHHHHH

[@jasonkeuma1986]

Start at 4:00 mark. You’re welcome

[@LockdownSecurity]

Thanks!

[@janetgilchuk5476]

Do you leave that wire in the black and gray slots once programmed. Thanks

[@LockdownSecurity]

Yes, but make sure the gray wire does not touch the chassis or a source of ground, otherwise the system will think the hood is open

[@grgilpin]

I have a hood pin, but it doesn't work. I modified the above tutorial so that I didn't have to break my back to jump the autostart module. You can do it from the broken hood pin. 1) Remove gray wire from hood pin located at driver’s side front (under the hood). a. The gray wire is ground. 2) Attached jumper wire to gray wire. 3) Press jumper wire again non-painted part of vehicle for one second. a. Parking light will come on. 4) While parking light is on, have someone hold the wire against the car body. a. It will stay one again for 20 seconds. 5) Enter vehicle and turn key to on and then off. 6) Hold lock button for 5 seconds. It is programmed. 7) Redo steps 5 and 6 for other remotes.

[@LockdownSecurity]

+grgilpin Hello, yes your steps are correct IF the hoodpin wire has been run under the hood, many times people find it hasn't been, hence the requirement to go under the dash