How to program and clone 2010 Audi A4,A6,A8,Q5 Transmission Control Module with autel IM608

Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

[@omaralimujah2475]

Awesome! Great video and subscribed

[@JVFIXLLC]

thank you

[@victorcontreras5858]

Hi can you explain me the colors of the resistance? I’m trying to do this procedure with my car

[@jgeorges3061]

great job brother any mines or negative think by using Autel im609 it look like great tool with euro cars like bmw, mercedes and soo on any information would be much appreciated thanks for sharing and happy new year. cheeeeers from Canada

[@JVFIXLLC]

thanks a lot, happy new year

[@giorgigiorgadze4556]

Nice. What if original control unit from the target car is demaged and has no comunication, is it possible to program the new one on the car without original data

[@JVFIXLLC]

yea with this scanner is possible to code a new one

[@jorgemat8080]

Great information, can't the unit just be cloned on bench without the car? Thanks.

[@JVFIXLLC]

yea u can just gotta do the harness

[@jorgemat8080]

@@JVFIXLLC thank you for the reply.

[@mohmmadmosa3487]

Thanks for the video. It was very helpful. I have the new Autel MaxIM IM608 Pro II, but I can not find the "Expert" selection; does it come with the default subscription? or do i have to do something to make appear? I got the machine three months ago

[@JVFIXLLC]

it should be there since u have the upgraded and faster version of the scanner. but u have to go to the immobilizer software not the diagnosis

[@mohmmadmosa3487]

@@JVFIXLLC Thanks. I found it and tried to use it today with a 2012 Audi A5 transmission, and it didn't work. It says only 0AW TCU is supported, whereas mine was 0BK. I ended up switching the TCU, and it's working so far.

[@GamingClans]

J😊😊😊😊😊😊😊😊😊😊😊😅😊😊😊😊😊😅

[@GamingClans]

​@@JVFIXLLCio

[@goodnessessien2336]

Thank you

[@JVFIXLLC]

no problem

[@Habbasio]

HI SIR WHERE YOU WENT FOR THIS PRORAMME.I GOT SOME ONE I WANT VW I CAN NOT SEE.PLS HELP

[@JVFIXLLC]

what scanner do you have. I have the autel im608 and you need to go to the keys immobilizer section functions

[@Rochie]

Do you think its possible to do this with kess v2?

[@JVFIXLLC]

kess is only focused on engine control module only I don't think it will renew a transmission module

[@jigger5000p]

hello sir, can i ask please now i got audi Q5 2012 year the TCM problem after scanner. and now the engine can't start ..how to solve please, thanks very much

[@JVFIXLLC]

I believe on your model you will have to use the engineering software called ODIS to reprogram TCM

[@train4905]

Exellent😊😊

[@JVFIXLLC]

thanks

[@mohammedabdallah9813]

I have a 2012 Audi control unit Damaged. I bought one and took it to the workshop owner. He told me that it was the second category and was not suitable, and he sold me one of his own. Is this true or a trick on the part of the workshop owner?

[@kva_powerup]

Can the autel mk908 pro do this ?

[@JVFIXLLC]

I don't think so cause u need the xp400

[@kva_powerup]

@@JVFIXLLC I also ordered the xp400 pro , and gbox3 alongside the mk908 pro ii , so will that suffice?

[@living9377]

Is it possible to rent these tools? $3.5k. Would it be possible to use vcds to do the same thing? I have that tool. Do you offer this service?

[@JVFIXLLC]

renting a machine like this I don't know anyone that rents it. and VCDS only can program new ones. the one that can do it is ODIS that's the engineering software for audi, vw, lamborghini, porsche. I can help you out if you ship it to me. I am still working on my website to offer these services

[@living9377]

@@JVFIXLLC where are u located?

[@JVFIXLLC]

@@living9377 Visalia California

[@living9377]

@@JVFIXLLCdo you have a website? Btw can you please give more detailed specs on the resistor? Can you check if the maxi support the vl300? A lot of programmers say they can’t do it.

[@Z.Qvlogs]

Do you know anyone who can help me with this in Dubai ?

[@JVFIXLLC]

no i do not. what issues are you having with your car