How to program your DIRECTV remote control

This video will teach you how to program your DIRECTV remote to be connected to your TV so you can control the Power, Volume, Channels, & Input. If this doesn't help go to the link below.
www.directv.com/DTVAPP/content...

[@jimchang1565]

This worked on my Magnavox TV.. It was in childlock and lost the remote and had no control. Almost threw the TV out, but we set up our DTV remote to the TV with your tutorial.. Thanks soo much

[@pocketjock]

This video shows the best way to program your remote. I just kept hitting channel down and it eventually went off! Thanks it works now.

[@bobbieshafer3773]

I tried following the tv steps and nothing. I followed your steps and it worked perfectly. Thank you so much.

[@brittanyking5821]

Thank you worked first time around. I was about to give up until I found your video.

[@nancysroth]

had to try it several times but followed the instructions and the TV and the input are working! /THANKS!

[@slp65]

Helpful video! I had to move quickly as soon as the TV came on to use channel up to get it to turn off and then to set up the input for everything to "stick" . If I paused in the steps at all, it no longer recognized that I was pressing the power button. Once I went through all steps in the sequence, all is working well--tv power, volume, and input. THANK YOU!

[@seagangstab2637]

Thank you brother totally worked. I'm a happy camper:) I used the link you provided and found five codes that were for my TV and the second one worked.

[@marcelogaray3645]

thanks bro👌 it took me about 10-15 trys to finally work👍 I got it tho, jubileeeeeee

[@yolandacollazo3843]

Omg thank you!!!

[@kimcostello6610]

I could not get this to work, but I have a helpful tip for those who have the receiver programed to the remote but not the tv, like I did. Go to MENU of the receiver on the Directv remote. Go to Settings, then Remote Control. Select to program the TV option, then enter your TV's brand and model. The remote should then program itself to your TV.

[@ImprovingYourMokai]

+Kim Costello I doesn't program itself, it gives you menus to follow for your brand and shows codes that could work. Program each code until you find the one that works. Then you slide the selector from TV back to the DirecTV logo and you're done.

[@calidronelife1572]

+Kim Costello Thanks!

[@shacoldbane1901]

Didn't help

[@shacoldbane1901]

+ImprovingYourMokai where are you getting these codes from?

[@ImprovingYourMokai]

The TV screen after you follow the menu...

[@Mayoforme]

This helped me a lot. Got it working very easy. Thank you!

[@trampasbelew3740]

Worked perfect, thanks

[@jacobstaten2366]

Thank you. Very helpful.

[@lkatie0626]

Thank you I’ve been living in the struggle for months.

[@paultietjen]

That. Was. Awesome! I had to follow the link and it worked like a charm! Thank you!

[@ark67tiger]

got code from link. Easier than DTV Site. Thanks.

[@mattnonetheless]

Thanks for the info! I saved money and fixed my TV! Thanks so much!

[@cecyylovesjesus3093]

finally it works. thanks

[@saysoun752]

Thank you. Worked perfectly for me.

[@alfordg9738]

Very, very, very helpful😊 Than you! Have a great summer!

[@jayeltee23]

Thank you!

[@sarahniki3]

So when I did this I got the TV to shut off and turn back on but I couldn't figure out how to keep the remote programed, so I read the instruction on the directv setting and you press select AFTER u press 'channel up' and the TV turns back on. Just a little heads up incase it doesn't work for others.

[@Mardochiamun]

Awesome! Thanks bro!

[@kevinalfrey2633]

Worked for me thank you 😀

[@arollinseng]

It worked thanks

[@ivonneflores7898]

awesome- worked right away

[@leapinglily388]

Perfect video!! Thanks so much :)

[@calebthomass]

Very helpful thanks!

[@JeremySamaroo]

This method does work like the guy said if the code doesn't work take the link in the description and look up your TV

[@sblake14087]

Your instructions turned my TV on but not off lol but the link was helpful and works. Thanks (:

[@Famegonna9999]

Thanks for the link

[@cameojones3166]

Hey I can't find your link for the codes to setup input button on directv remote!!

[@bobsmith-gc1tf]

Awesome link thanks

[@jessiebamtorres4124]

Thanks brotha. Good stuff.

[@kristihaynes507]

Thanks a ton..it worked perfect

[@onlyreyes]

Thanks!! Very helpful video

[@StevieMcWinnie]

thank u so much it worked

[@badassmex213]

good job on instruction video thanks

[@trentonsmith2833]

Thanks this worked good on my vizio tv

[@greatesttimes9620]

Thanx that really helpful

[@ShawnsHobbies]

Thanks for the link.

[@sharastarful]

This did not work for my Sylvania, so clicked on the link under "Same steps shown in video..." And clicked "Other Codes" and just went down the list until I got everything to work :) Thanks!

[@Mike-cl1sy]

Ty!

[@Vikingstw]

If it's not working for you, hit select after the procedure in the video, it should blink twice to confirm then your good to go.

[@nicktipler4490]

WORKED

[@adamdilley1554]

Hey thank you man

[@shynny1029]

omg thank you....your link helped

[@loyalcrystal]

I tried to go to the website you provided and it isn't for directv. It linked to vista print. My input won't work and i followed instructions and even tried lil 10 times and nothing works. What is the correct website to the different codes? And any new tips?

[@Vladie1987]

This video help a lot

[@chicalr]

Thanks so much ;)

[@sarys73]

thanks bro. Worked like a charm

[@PeterKiryluk]

This Emerson TV, is also made by sylivania and like 5 other companies. I know because mine is the same TV and even starts the same exact way, same plastic shape same stickers, just a dif name. I cant find it for my tv, BUT FYI for people with this TV, In the back there is one Capacitor 200V 270 or 220 UF, that capacitor will fail, its cheap crap, so find a VCR, rip it apart and get another cap, when it fails, its in most VCRs. Just a good thing to know.

[@jennmedrano2265]

Big help thnx

[@gtrance3567]

Good video what worked for me was not to press up but to press select instead. Also for the input, it worked for me but the TV have to be on. Thank you again

[@michelletaylor369]

❤️‼️🙏🏼 HEY JUST THANK YOU‼️ Seriously appreciate this! The link was awesome too wow! The first time I actually tried to use someone’s instructions that worked seriously appreciate it.

[@nuggie4huggie23pp]

Mickey Taylor “hit 9...9...1” Me trying to remember the number to 911 to see if this is a prank😑😑

[@michelletaylor369]

Jaylon Jackson lol!😂

[@draugwraith5549]

THANK YOU

[@mayrabernal06]

Do you have emerzon? ?

[@NotTelling51]

Thanks for the help. Now if you follow your link you can just put in your own tv model and it'll give ya the code.

[@nat3803]

Thanks everything worked but the input. I'm still working at it. Thanks for this good information. It did help me.

[@edgucolts73]

Thanks bro

[@cynd23]

how do I add subtitles or Cc ..I don't know how to do that on this remote. can you show me? thanks

[@252hotdog]

Worked for Sharp 40'' flat screen

[@frosty231]

Just follow the link its way easier!! And thank you for the link!!!!!!

[@karengalanaugh1666]

This is a good remote.

[@DaddysDarling84]

thanks

[@rayhernandez625]

Good Shit Man.☑💯

[@GlazedHonuts]

I love you

[@franciscocardoso8340]

Thanks this worked for my Visio tv

[@chris_smiths3006]

You did this exactly? I have Visio tv and it’s not working

[@franciscallahan4213]

Thanks for this video! It worked! Only thing is trying to program the remote for my TV Directv doesnt support LG. I have no idea why, LG is a Huge Company that makes many Tv's. Oh well. Thanks for this

[@paigejones9947]

Emerson TV code 116864 remote RC65 worked for me!

[@Trpr-dw4wx]

got everything to work except the menu button. how would I go about programming that one?

[@felix55534]

I am truly grateful to have follow your instructions, Thanks a Million.

[@Beer4myHorsez]

Thanks that was helpful, it worked for me. all the other codes did not.

[@lindaabbott5509]

pushed the wrong button now my TV won't work I need to know what number I put the TV on so I can use cable please help

[@MrGorpstine]

Ayyyyyyyy it worked before I pressed down. Lol I didn't even have a cable box hooked up

[@bobsmith-gc1tf]

Can I replace the code you provided with the code of my tv?

[@bohansen5027]

You are a lifesaver...My Life!!! We have been on Direct TV for 2 months and using one remote to turn the TV on/off and for the volume. And the Direct remote to change channels, record, etc. Kept misplacing the on/off remote. It's hard to keep track of two of anything. So-o-o I thought I would surprise my husband and program the Direct TV remote to handle everything. UNFORTUNATELY FOR ME...I tried to do this the night before Thanksgiving and all his football games. I used the instructions that Direct TV posts on the internet. I Got the DT remote to handle the sound, but when I tried to program it to turn the TV on/off, the TV screen jumped to grey. No picture. What a mess!! Needless-to-Say, my husband spent Thanksgiving at someone else's house. After I was over the shock of the biggest argument we have had in 30 years of marriage, I found your You Tube posting. And followed your instructions. Your step-by-step directions were right on. We are now watching TV again in our house. And we wonder what our pioneer fathers did before television? Of course, that was also before football...so nobody really cared. Thank you again and again.

[@gustavo2x65]

do you keep passing up till your TV turned off ???????

[@TomTom-tz7zf]

dude ty

[@StaceyGlover77]

I'm looking for the onn dvd player code.

[@AgainstAllOps]

its finally worked after I hit "select" once the TV came back on...

[@StreetCarCartel]

What about making a radio work

[@janelawson1243]

need code for sylvania dvdplayer

[@ozpreciado8647]

can i use this control on my tv if i don't have direct tv as a cable provider?

[@HellmanMatt]

That's my problem.

[@michaelsanchez486]

Idk

[@RNG-999]

Can you use a DirectTV remote WITHOUT a DirectTV Reciever plugged into your TV?

[@itstime6779]

良否 RNG no

[@CringeMax8669]

Works for apex tvs

[@benjaminchen1964]

I found the code on the second part & everything seemed to be going fine but when I turned TV on to try to change the channel 4 asterisks popped up in squares and it said enter password. I have no idea what they want. I wasn't made aware of one and don't think I ever made a 4 digit one.

[@ashleighbarnes4265]

That worked perfectly!! Great job!! If you can’t get it, you’re not following instructions. Thanks Dev!!

[@the_brazzy]

Thank you! Lol

[@stephaniebegarney1546]

Need codes for zenith TV to fix my input button please

[@JamarJean1995]

he just help yall out nd yall cursin him out.

[@brandonvelazquez3144]

it doesnt work when i enter 991 please help?

[@michelletaylor369]

brandon velazquez link below he put for you to find your tv mine was 10045 philips.😊

[@ilseryan8145]

I can’t get it to work. I quit.

[@TheExtremeZeo]

Nope don't work well the first time it did but it somehow when on and then it wouldn't work no more I Tryed to fix it but still didn't work .

[@mosesangel7919]

fucking finally I found this shit 😂

[@MALDITO12]

The volume don’t work

[@backnd_2329]

I have a seiki tv brand it dont have that

[@MrOut4astroll]

Once you have gotten the tv to turn on by pressing down, you dont need to press up,.. INSTEAD,.. HIT SELECT.that enters the code you scanned in. i did that and THEN the input code worked.

[@aupuch2012]

right on brah, this step made it work.

[@famflrs5]

Should my tv be on or off??

[@MrWhyorwhynot]

it keeps unprogramming itself

[@nickf.2871]

Didnt enter the code and go through the steps proper?

[@nickf.2871]

Just setup my 2007 philips in 2 minutes after this vid

[@manuelorantes7827]

It doesnt blink twice ejem I do 991