HOW To PROGRAM YOUR ESC In LESS THAN ONE MINUTE! The FAST AND EASY WAY to Program Your Hobbywing ESC

FAST and EASY Way To PROGRAM Your HOBBYWING ESC. I give a tutorial on how to use the “Hobbywing Program Card” to Change the settings on your HOBBYWING BRANDED or REBRANDED. Drop a LIKE if you feel you learned something from my video!!

[@captainjaxx3728]

Excellent,,, very informative!!!!! Thanks 🙏

[@RCKnockout]

No problem…..Glad you found it helpful 👍😉

[@LiquidSSSnake]

Works on Spektrum Firma 150 👍 I wondered if my card would work since it's all made by HW.

[@RCKnockout]

Yeah it should basically work on anything made by Hobbywing.

[@jaguarsrcfamily101]

Works on Spektrum firma 160 Arrma 8S ( have to use the owners manual not the card for items and values )

[@RCKnockout]

It must be a rebranded hobbywing made for Arrma then.

[@LiquidSSSnake]

Yes, I had to use the manual too, the Infraction manual. The manual that came with my warranty replacement ESC was different too... There's the retail version ESC and the Arrma one.

[@RCKnockout]

@@LiquidSSSnake that makes sense since it’s rebranded for Arrma.

[@RCFPVSTL]

Great Video Sir.

[@RCKnockout]

Thanks!

[@vibesrcsandkicks9057]

Thankyou Brother!!!

[@RCKnockout]

You’re welcome 👍😉

[@Webb4RC]

I have a RadioLink RC6GS v3 and a Hobbywing Fusion quickrun SE 1800kv running on a 2s lipo for now I have a 3s 11.1v coming. Anyway there seems to be a bug when I barley pull on the reverse trigger in reverse the throttle jumps up and down slow then fast ect....I dont know if I have my remote settings jacked up or what. I have a Hobbywing programming card coming would that maybe fix it? If you know how to setup my radio settings could you help?

[@RCKnockout]

It could be a connection issue with one of your motor wires or it could be a programming issue…but first thing I’d try is to recalibrate your radio system so it knows where your throttle end points and neutral point are

[@Webb4RC]

@@RCKnockout it was A.B.S settings. I didn't know which A.B.S settings to change so I just started playing around with it and eventually figured it out. She runs like butter now!

[@Webb4RC]

@@RCKnockout now I just need to figure out how to assign buttons but I can figure that out as I go.

[@Webb4RC]

@@RCKnockout I'm just wondering now, when I change to a 11.4v if the esc will accept it or if I will have to change a setting I'm running 7.4v 2s right now. Still waiting on the 3s to be delivered. Oh I absolutely hate the battery tray in the E10 and the gears provide a dangerous situation.

[@RCKnockout]

@@Webb4RC nice! Glad you got it figured out 👍😉

[@user-gd7uz5pk7u]

Do these cards always come with the cable to connect them?

[@RCKnockout]

I believe they do

[@LADYGURRLL]

I wonder if those low low voltage cutoffs are for ni-MH battery packs.

[@RCKnockout]

Low voltage should just be for Lipo batteries I would think 🤔

[@richardsereda1433]

There is a setting that turns off low voltage cutoff if you are going to use ni-MH packs

[@SweetTooth10]

What does it mean when you only get lines and no numbers?

[@RCKnockout]

Sounds like it’s not getting a connection

[@SweetTooth10]

@@RCKnockout My esc is a Xerun XR8 sct. Is it compatible with that model.

[@RCKnockout]

@@SweetTooth10 I would assume so

[@dustinplee5067]

Will it work with a Redcat Racing HW-WP-10BL60-RTR-D Hobbywing 60A Brushless esc

[@RCKnockout]

Should work with any Hobbywing Product

[@1994RALLY]

So if I get like a eBay esc and brushless motor can I link my tqi remote to it

[@RCKnockout]

Yeah you can use basically any esc and motor…..all that matters is linking the transmitter and receiver

[@1994RALLY]

@@RCKnockout so what do I need to buy?

[@RCKnockout]

@@1994RALLY basically any brushless 3s capable system with a similar (kv) rating to the stock electronics will work

[@1994RALLY]

@@RCKnockout I’m gunna give it a shot

[@RCKnockout]

@@1994RALLY go for it 👍😉

[@neurofunk2731]

What controller is that mate? Thanks

[@RCKnockout]

It’s the Futaba 4PV

[@neurofunk2731]

@@RCKnockout nice one 👍

[@bryandunn4317]

Can you post a link to the program settings for the esc

[@RCKnockout]

Bryan Dunn sorry I don’t have a link for that. I can’t remember where I found it. Your best bet is to type in “Redcat Kaiju esc programming” or look up the “Redcat Kaiju owners manual”

[@indio0360]

Why it don't work in my arma typhon 3s

[@RCKnockout]

Is it a Hobbywing Esc? Or Spektrum Smart Esc? I don’t believe it will work with any Spektrum branded esc’s