How To Put Christmas Lights Around Garage Door No Glue Or Nails

This is one way to install Christmas lights around a garage door with out damaging your home. All we used was PVC piping and No Hole Hangers.
All The Christmas Lights Supplies To Get Started
www.christmasl...
❄️❄️❄️LEARN HOW TO MAKE MONEY IN THE WINTER TIME! ❄️❄️❄️
Teach You Everything You Need to Know How To Successful Start And Run A Christmas Lighting Company 🎄🎄🎄🎄🎄
www.christmasl...
Join our mailing list today! To stay informed.
www.christmasl...
🎄🎄🎄🎄HELPFUL RESOURCES FOR CHRISTMAS
LIGHTS🎄🎄🎄🎄
HOW TO MAKE EXTENSION CORDS
• How To Make Christmas ...
How We Install Christmas Lights Using The Goat Steep Assist
• How We Install Christm...
TOOLS NEEDED TO HANG CHRISTMAS LIGHTS
www.christmasl...
CHRISTMAS LIGHTS SUPPLIES
www.christmasl...
Have Any Questions?
www.christmasl...
#ChristmasLights #ChristmasLightsInstall #ChristmasLightsCommunity #JasonGeiman #ChristmaslightsBusiness

[@Funderocity]

I like how real the video is. Most people edit out when something goes wrong. Which sucks for those of us who are clumsy and never do it right the first time xD

[@ChristmasLightsCommunity]

Yeah sometimes I don’t cut out the clumsiness because I know it is real. And the best way to learn is sometimes either by your mistakes or someone else’s mistakes

[@Funderocity]

Christmas Lights i really appreciate the realness. And despite anyone else’s view i really think this could help us with our garage light project:) Keep making videos!

[@ChristmasLightsCommunity]

I will keep making videos if you keep watching them

[@cryptothedawg1160]

"Gettin a little crazy here" lol Great video thanks!

[@charlescahoon3557]

Good video. I use 1x2 inch pressure treated slats. Drilled a hole at top and bottom of slats and put an anchor in bricks. Just a couple of screws and ready to go. I am able to keep a lot of lights attached to the slats and bundle the slats with tie wraps for storage. Have done this for the entire front of my house. Lights are stapled to the slats.

[@ChristmasLightsCommunity]

I love that idea

[@MidwestShotgunner59]

I used this method on my house and it worked perfectly. This was the first time ever I put xmas lights up. My neighbors said it looks like a professional put my lights up. Thanks a million for these great how-to videos.

[@ChristmasLightsCommunity]

Great job! Thanks for sharing

[@OneIdeaTooMany]

This is fantastic. I don't own my home so this great for me. I can mount my lights without any permanent fixings.

[@amandaperez1341]

Thanks for this video! We’re doing this TODAY! 🙌🏼

[@ChristmasLightsCommunity]

Awesome Thanks for watching

[@aaronupton4584]

Love the videos brother! One question, how tall are you, lol. You look like a giant compared to that garage door

[@ChristmasLightsCommunity]

Aaron Upton I’m 6’6

[@aaronupton4584]

Yep Jason, you're a giant lol! On another note, you may have addressed it in a video, but what are the best all around clips for C9s?

[@ChristmasLightsCommunity]

Aaron Upton The all in one clip is what we use a lot of. This clip you can use for everything you do rather that’s the shingle clip or on top the ridge line I use it to tuck my cord in behind gutters. You can also use the tuff clip I just started using it today actually and if you have a lot of snow this is a great clips so that you don’t have to worry about losing them.

[@aaronupton4584]

Do you have a link for the all in 1 clips?

[@ChristmasLightsCommunity]

Aaron Upton www.christmaslightshelp.com/supplies/ it’s about half way down on page

[@valerieroman8290]

I cut the pvc but it is a tad short. What can I do? Thank you for taking the time to put this helpful video up.

[@nickm90717]

What if you only have brick around the door? How would you support the top pipe?

[@kimberly.thomason]

How do you suggest fixing the center From sagging if I don’t have siding. My house and trim of garage is painted stucco.

[@ChristmasLightsCommunity]

Staple in the middle maybe

[@colleenevans979]

How does that stay up on the ends? The poles are not connected to the house in any way.

[@techstermb]

So the Christmas lights don't interfere with the operation of the garage door?

[@heatherr.2070]

Oh maaaaan, we don’t have any vinyl siding. Been trying to figure out how we can put up Christmas lights without damaging our house and this was a great video! Wish I had siding though 😭😭

[@ChristmasLightsCommunity]

If you have a break you can use glue

[@begrateful8934]

Would 3/4 work better?

[@ChristmasLightsCommunity]

I don't think so I think it would've been too big

[@begrateful8934]

@@ChristmasLightsCommunity thanks man appreciate the knowledge

[@grandfury5609]

I don't have vinyl, I have stucco how do you suggest I keep it from sagging?

[@ChristmasLightsCommunity]

dont know sorry i would have to see it

[@Todd_Kobell]

Hot glue gun.. Ive done it for a couple years myself... Just need to hold it on for a few seconds and voila. The texture of the stucco gives it something to grab onto and release from since the glue won't make a perfect seal against it. There's probably some 3M products that might be strong enough to hold as well. I like the hot glue because it's cheap, clear and oddly satisfying.

[@logan_2635]

Gorilla tape works well also.

[@Ny4evr20]

@@Todd_Kobell Any issues with it damaging the stucco after you take down the lights and removing the glue?

[@grandfury5609]

I tried it and Ive tried it again w the PVC pipes. I've tried glue, gorilla tape, adhesive mounts w gorilla glue. Everytime I come home from work they somehow come unattached from the top and the shits on the ground all smashed up.😡😡😡😡

[@AlexSantos-dy2wx]

What happen if you have stucco and not siding

[@ChristmasLightsCommunity]

magic glue. yeah thats tuff

[@MrBoy44]

Are the lights LED?

[@ChristmasLightsCommunity]

Yes they are

[@kevmiller6632]

Nice video. However the pvc on the sides and bottom. They’re not fastened to the house as per the video

[@washmen7505]

How much do you charge for garages? Minis vs C9’s

[@ChristmasLightsCommunity]

Usually we don't do garages for customers

[@jaredscott547]

Know anything about pressure washing? Look familiar lol

[@chrishigdon1070]

ha ha

[@ChristmasLightsCommunity]

Are you Santa

[@itsmewhatshisface9386]

So, 🤷🏻 a damaged house it is

[@bth9101]

That’s TACKY. Use 1x2s and hot glue them to it. Lights will be a lot straighter.