How to put on First Order Storm Trooper Armour (Imperial Surplus)

[@SandraOrtmann1976]

I had to smile about that "you look cool or you are comfortable". Like you, I prefer to look cool. Though I took the Mandalorian route. My first life-sized costume is the Boba Fett post-sarlacc. It is well under way, and I wore it already once (with a hastily painted and already stripped helmet) to one event. Without ventilation. Boy, did it feel hot, and did it feel cool! So - did I go for a Jedi with my next costume? No...Mando again. This time basically a full plate harness, mostly made of aluminium and black leather. Some red thrown in here and there (helmet is 3d printed though). I hope to get both approved by the Mando Mercs (the metal stuff is doubtful, it may be too much in the realm of a medieval suit of armour. But we shall see. I am doing my best to squeeze the Mando in there.).

[@CaptainsDrydock]

Fingers crossed in getting your Mano armour cleared. What's important is that it makes you feel great wearing it and love the reactions from others. Sounds like you've put a lot of effort into it, so I bet it looks amazing!

[@attilafekete7892]

The joke is that Finns undersuit when he took of the armor in eo 7 was anything but an actual undersuit. It was too loose and 2 piece and no shiny butt. Even worse werr his shoes, where did he got those grey shoes in the middle of the desert??

[@CaptainsDrydock]

WoW! Did not notice that. Not that you've pointed it out, I won't be able to unsee it :D

[@gustonzimasheen]

I haven't looked into this myself, but I always imagined that's how Han Solo knew that Finn was an ex Stormtrooper, from what he was wearing. Mainly the shoes, since he'd had to wear the uniform too at some point or another.

[@kibainuzuka858]

His shoes were white at the start of the film but when he crashed landed and walked threw the dirty burnt sand his shoes got even more dirty and he walked all the way to town in jakku so they got even more grimy. If you look closely it is the same shoe as every other trooper. Just way more dirty

[@attilafekete7892]

@@kibainuzuka858 nope, it is way different than regular stormtrooper boots, it has a ribbed texture on the top. Google FN 2187 boots.

[@futrfromundertherock4917]

So glad they addressed going to the bathroom in that thing

[@CaptainsDrydock]

It's strangely a subject not mentioned much despite those that wear the armour do so allllllllll day. Might do a KZbin video dedicated to it but then might be banned soon after :D

[@gustonzimasheen]

32:11: The whole process, although uncomfortable for you at times, is so satisfying at the end. My excitement level went up when you pulled out your weapon...uh that doesn't sound right.

[@CaptainsDrydock]

LOL :D Best comment ever!

[@ZSPEZNASV]

Thanks, now I know where i Should start when getting dressed

[@Mist_Hunter08]

"That's right you can actually zip this up and pull out your little fella"

[@deaghansionnach2936]

Brilliant video, I have been searching for a while now to purchase armour, came across you by accident, awesome video! Many thanks, I will order my armour from Denuo Novo, where can I purchase the boots and gloves and blaster from? Many thanks!

[@CaptainsDrydock]

Thank you so much for your support :) I made a video on the soft material i.e. boots & gloves including links in the video description... kzbin.info/www/bejne/l52loJZ-rNermq8 If you would like a premium light & sound effects blaster such as the one on my channel (link below). Feel free to contact me directly at [e-mail] kzbin.info/www/bejne/hHyvan-Dj7iMeJI

[@alexjohnson3306]

i commend ya mate i ordered the pre made ...just don't have the space to do it but my bday is a few days before hallloween and hopefully going to get my first order suit before! i have the fitted anovovs helmet and same boots (lol not new hope) but everything ready to go even gloves so watching again so when it happens I know...thanks man!

[@jonathanchaps5665]

I just got my Denuo Novo complete kit(ordered in 2016... arg!). I'm slowly building and watching these vids as a guide. Love it! Question is: do you HAVE to paint all of the armour? I can see here and there to cover bondo/slurry/epoxy. But painting the whole thing feels.... unneeded. And another variable to worry about with wear and tear. Why did you decide to do it? (Side note: it seems like my helmet white is a shade off of the armour. And I know that's a big factor too).

[@CaptainsDrydock]

Thank you for your support :) To get a uniform finish, you'll need to paint everything. You'll see the difference in shade and texture immediately if you decide to only paint where filler is applied. Regarding wear & tear, this will happen when used and you'll have to make repairs which is the added benefit to paint everything, as it'll be easy to hide the cracks you repaired later. Difference in shade can stand out depending how different it is. Note, compare the helmet & armour outside under day light conditions rather interior lighting. Some troopers respray the helmet in the same paint they did the armour. Or do what I did, and find a white that looks exact to the helmet and just paint the armour. Hope this advice helps :)

[@jonathanchaps5665]

@@CaptainsDrydock this does help. There was a recent video of a 501st member discussing his armour. Not a tutorial, more of a review. I've sure you've seen it (if not I'll send you the link). He said he didn't paint the armour. But you raise good points. A uniform white is ideal and prob what the 501st wants. It's great to see you responding to questions. Thanks Captain!

[@CaptainsDrydock]

@@jonathanchaps5665 I'm happy to help, as the reason I started this channel was due to not finding 'friendly' support. So I'm glad you're finding it useful :) Let me know if you need any further help. Cheers Commander ;)

[@curtabbott6032]

Did you ever get your Anovos one? I actually received mine today. I ordered in 2016, and the new company Denuo Novo honered the order.

[@CaptainsDrydock]

I cancelled my order a few years ago and received a full store credit from Denuo Novo. Seen lots of posts of customers receiving theirs recently. Tempting to order one, but seeing I have a completed Imperial Surplus set there's no point.

[@ninatheorthodoxwoman]

Very nice, can I make my own stormtrooper armor out of foam?

[@CaptainsDrydock]

Thank you. Sorry, I don't work in foam. But there's many makers that specialise in that material.

[@TODOMONKE]

wow super cool armor! i got the child one when i was younger for only 200, now its 300!grew out of it ages ago, will buy the adult version soon cant wait!

[@CaptainsDrydock]

You'll love it!

[@TODOMONKE]

You also earned a new sub 👍🏽

[@CaptainsDrydock]

@@TODOMONKE Very much appreciated :) For the Empire!

[@addison7299]

Any idea on Finn's boots? Very different in Force Awakens

[@singriioticstudios]

How did you add sound effect and your wife's voice to the e11 blaster??

[@CaptainsDrydock]

Here's a video

[@CDNStarWarsOutpost]

I'm looking at purchasing one of these suits. I saw that anovos makes a suit as well but its a bit more expense. What made you go with the imperial surplus one?

[@CaptainsDrydock]

Like many, I ordered from Anovos, but they didn't fulfil their armour order for years if at all. So I cancelled it. After much investigation at the time the next best armour kit was produced by Imperial Surplus. As the owner was the original designer of the first Anovos version of the kit before he made his own business. Stands to reason why it's very accurate - enough to pass 501st standards. Anovos has since been bought by Denuo Novo and now (in my opinion) produce the best kits on the market using a vac-form technique to make well defined details and edges. So if you have the money - buy Denuo Novo but if you have a tight budget, Imperial Surplus is still good enough to make you look and feel you walked off the set. Hope this feedback helps as I did waffle on a bit :D

[@CDNStarWarsOutpost]

@@CaptainsDrydock Thanks!

[@bradbryan1283]

@Captain's Drydock I bought a set of first order stormtrooper armor but it's too big. What to do?

[@CaptainsDrydock]

Hi Brad,. Simple answer is 'trim to fit'. Where doesn't it fit and what height are you?

[@bradbryan1283]

I am 5ft7

[@bradbryan1283]

The spats are too big

[@CaptainsDrydock]

@@bradbryan1283 You can trim them?

[@bradbryan1283]

@Captain'sDrydock I managed to trim my armor and it is ready to wear! Can I send you a picture

[@Ragnarok6664]

Really like the baton addition, best char in FA ☝🏻😅

[@CaptainsDrydock]

Thanks so much. I got it more for the fact I was able to walk around in public and not have the Police jump on me if I had a blaster :D

[@Jormungandrr69]

Super cool and thanks for making a tutorial on how to put on the armor lol! Do you happen to know where I could get my hands on a mando? Im only around 5'3, so im a little short and dont know .

[@CaptainsDrydock]

Thank you :) No matter your height you can tailor armour to your proportions. Regarding Mando, sorry I don't know where to get the full armour. However, check out the Facebook groups as they will tell you the best places to go - lots of made producers out there.

[@NicoDLB]

Ou pouvons-nous acheter cette tenue s'il vous plaît ???❤

[@CaptainsDrydock]

imperialsurplus.com/product/first-order-stormtrooper/

[@NicoDLB]

Je vous remercie ❤ mais je suis Français, j'espère qu'ils pourront me comprendre et moi aussi car je parle pas anglais malheureusement 😢😢

[@CaptainsDrydock]

@@NicoDLB Google Traduction :)

[@ricardogimeneztoyota3622]

What’s the pricing for these cosplay? Sorry I can’t find it on the website 🥺

[@CaptainsDrydock]

Check out the first episode where I break down the cost... kzbin.info/www/bejne/pGqwdpyEmLdrrdE

[@TK2236]

Thank you very much Sir o7 (edit) if I may ask, how tall are you?

[@bradbryan1283]

Good! How long did it take you to build it?

[@bradbryan1283]

@Captain's Drydock Can I ask that I have First Order Stormtrooper Armor but I do not have the Force Awakens Helmet. Any idea where I can get one sir?

[@CaptainsDrydock]

Here's a link for the helmet... www.denuonovo.com/products/star-wars-the-force-awakens-first-order-stormtrooper-premier-helmet

[@bradbryan1283]

Thank you sooo much sir I am purchasing the helmet now!

[@AIDEN_SMIT]

Yeah haha I just ordered a new pair of forearms 😂 if only these videos existed a year ago 😂😂😂

[@c4ndyluv]

How to get one

[@cutulphashby6972]

Sorry to get in touch this way but I don’t know how to email directly! Hello, I’m very very keen to sort my anovos kit out for a first order stormtrooper! I’m having difficulty finding all your tutorials in order and also I want to know exactly what tools you recommend I get before even starting! I have to trim the kit from scratch- let’s not even discuss the blaster yet! … I was amazed to even get it tbh but don’t want to mess it up as it’s my first attempt! If it’s tricky can you recommend anyone to do it for me? I’m in Norfolk… Thank you and LOVE the channel! Liam

[@CaptainsDrydock]

Super thank-you for your support. Completely understand wanting to be careful as it costs a lot for us to import into the UK. I've added the full playlist link below and should start sequentially and answer your questions. But if you want more details, feel free to email me [e-mail] and I can give you detailed answers. kzbin.info/aero/PLRnCvSLA9KE4AEzeIN4-BgZ7dZTLZi5am

[@bradbryan1283]

Love this video Captain's Drydock! Can I ask how much you love the armor sir?

[@CaptainsDrydock]

Thank you for the support - much appreciated :) I love this armour and feels great when walking around in it.

[@bradbryan1283]

​@@CaptainsDrydock Where did you get that blaster that is so darn cool?

[@CaptainsDrydock]

@@bradbryan1283 Here's a link to my video making it. The links to the 3D files are in the description. I'm currently filming a detailed playlist of making it so others can follow. kzbin.info/www/bejne/eoDNnoh9n7JqjJo

[@bradbryan1283]

Thank you I got a blaster because of that video!

[@Mist_Hunter08]

*the thumb nail*: 🤗🙂😈

[@ricardoquiro]

I didn’t get that well. The harness you wear under the armor, did you make it?

[@CaptainsDrydock]

Thank you for your support:) The harness that holds up the abdomen was made by me. Here's a link to the video... kzbin.info/www/bejne/b6TEeah-erKgpdU

[@ricardoquiro]

@@CaptainsDrydock ahhh, Awesome! I really enjoyed your videos and tutorials! I’m finishing a Sith Trooper to join the 501st and assembling the armor has been challenging for a first-timer 😅

[@ricardoquiro]

@@CaptainsDrydock actually I was looking for information on the harness of min 35:28.

[@CaptainsDrydock]

@@ricardoquiro Ah, that is produced by a Candian maker called Geeky Pink. She can be found on FaceBook.

[@PowerSL]

Where'd he get the harness?

[@CaptainsDrydock]

Hi Geeky Pinks via Facebook :)

[@OMARALLSTARBABY]

Can I buy the entire suit from you please

[@CaptainsDrydock]

If I did sell this, it would be for a lot of money.

[@KevingaryGreenfield]

Looking good

[@jotunhammer]

and right side velcro shows putt that side inn and 1 more thing get helmet little bit more back looks to heavy front faced

[@billybonesthepirate2025]

could you start to create a Storm Trooper church that would be cool.

[@CaptainsDrydock]

:D I think I need a bigger 3D printer. But love the idea.

[@bradbryan1283]

Captain's Drydock Where can I find an awesome baton like yours?

[@CaptainsDrydock]

Here's my video review of the baton. Sadly they no longer make it, but if you're lucky you can find them on Ebay. This is where I got mine... kzbin.info/www/bejne/gZfLgZuGlNJ7hMk

[@bradbryan1283]

Oh I still love your videos ❤.

[@jotunhammer]

my body dont fit anovos kit or imp sur 👀

[@CaptainsDrydock]

Sorry to hear. 3D printed armour is a great option as it can be scaled to any size or shape.

[@Neseku]

First Order officer uniform??

[@CaptainsDrydock]

Hi, is that a request?

[@Neseku]

@@CaptainsDrydock Yes please 🙏

[@CaptainsDrydock]

Sadly it's not my bag. I'm more into being a grunt trooper :D But if I do find someone that does, I'll forward you the link.

[@bellbell1135]

WAHERE DID TOU GET THAT I MUST KNOW

[@CaptainsDrydock]

imperialsurplus.com/product/first-order-stormtrooper/

[@peppermintrampage5884]

5' 7" "Aren't you a little short for a stormtrooper?"

[@CaptainsDrydock]

🤣

[@rododin]

Can you make me storm trooper armor?

[@CaptainsDrydock]

Yes, but it will be expensive. Message me at [e-mail]

[@Mist_Hunter08]

10:59 welcome to bras

[@bradbryan1283]

Did you like the video?

[@josephbevacqua9217]

Nice video

[@70CadillacMan]

What if you have to poop 💩?

[@CaptainsDrydock]

Hold it unless the Force is too strong :D

[@brysonblood2697]

The 501first is clone trupers that were lead under Anakin Skywalker or known as Darth Vader

[@orsom1234]

It's also a group of people that wear screen accurate star wars armor

[@leoplays9303]

The thumbnail💀

[@alexjohnson3306]

ha under armor socks under your armor mate!

[@CaptainsDrydock]

LOL... I didn't notice that :D Good spot

[@alexjohnson3306]

just pre ordered the denuo novo set and im 5'7 also so this helps alot !

[@rododin]

What if you have to go poop💩 in your bed

[@CaptainsDrydock]

Let it happen :D

[@bradbryan1283]

Can I subscribe to you Captain's Drydock?

[@KKPLAYZ1888]

Lil fala I don’t know about lil. Lol

[@flexflex7605]

La légende de Pamelarioss.Uno snowquen's est mon idole. C'est la personne que j'aspire à êtres, c'est ma lumière du jour

[@jameswentzkershawn001]

No!!! There is no way!!!

[@gabrielm.942]

While I hate the Disney movies. Their imperial designs were pretty good. Outside of the officers that is. The ships looked great, the armor looked cool, ships looked better then their og versions. However the movies were just terrible lol

[@CaptainsDrydock]

Same here, I love the designs more than the movies. Although my guilty pleasure is Force Awakens.

[@gabrielm.942]

@@CaptainsDrydock same 😂. It’s the only good one. Especially if you’ve watched the behind the scenes of the originals released in the 2000s. The idea of force awakens is basically George’s original crew. They simply ruined it follow up movies and bad writing.

[@jameswentzkershawn001]

As much as:::: in my whole life, I wanted to be I Storm Trooper;;;;;;Goodbye.

[@RexTheNarrator]

I hate the new trilogy...I love the designs

[@CaptainsDrydock]

Yeah the designs are so well done.

[@stevecarp7435]

Utter nonsense

[@CaptainsDrydock]

Thank you for your support x