How To Raptor Line a Jeep from Start to Finish

[@carbonshocks]

What do you think of the finished product! Did you like the Dent repair technique we used?

[@carbonshocks]

Already got 5 un likes? how rude lol! Whats up with that?

[@FirstLast-bi8xi]

@@carbonshocks dudes with fat fingers and laggy touchscreens...

[@Roarman57]

Oh man at least it really was name brand Bondo! People calling body filler Bondo drives me up the wall! It looks great!

[@DetroitMicroSound]

"Now you're missin the bottle" I had to tell my dad that one time, on a road trip. 🤣 it looks cool! That covered in a nice way. Very forgiving of that wavy old hood. And the real test of the mesh technique you experimented with is time, right? Looks good so far! 😎

[@DjDubStak]

That mesh technique was quite intuitive-is...... Lol. Turned out smooth for such a big dent. Haven't seen Joe this excited in awhile

[@JeepTJWheelin]

I am going to be Raptor Lining my '05 TJ Rocky Mtn in early Spring. Can you tell me exactly what Raptor Liner color you used on this hood? Also, is there a follow up video of the completed Jeep?

[@bchiarmonte]

Color is sick, turned out great! Can't wait to see the entire jeep done up like that.

[@carbonshocks]

Joe is excited and we cant wait to it covered head to toe!

[@bchiarmonte]

@@carbonshocks you should cover Joe head to toe in it.

[@darrenjones5885]

A really good repair and paint job. In March I bought a 1985 VW Vanagon camper (VW T25 here in the UK). Lots of work needed. I’m thinking of using black Raptor up to the body line level with the bumpers.

[@chuckh8800]

Wow guys it looks awesome

[@frankgeimer5952]

The color is Great!! Great Job!

[@MoondyneJoe]

Love the bed liner guys and especially as it is my favourite colour! Great job on the complete application. Daniel is a vinegar helps to take the sting and heal the sunburn. Apply with cotton wool. Tony from Western Australia.

[@johnsaunders1694]

i really liked this video. The hood came out great. I was very shocked how you fixed that dent and I bet it is going to hold up amazing. good job and dont quit!!!!!!

[@Dimination36]

You guys are undervalued right now! Get some more intermingling with other better known channels and push to get noticed! Love the content and the energy!

[@gerrittklashorst7306]

That mesh backer for the hood corner was a good idea because it should give the Bondo more of a mechanical bond then the usual 50 or 80 grit surface prep that it goes over

[@rhettfarnum]

That looks awesome!! I'm going to have to look into Raptor liner for my 4Runner.

[@larrysutton6530]

It looks awesome and I can't wait to see the whole Jeep done

[@Roarman57]

I just sprayed my XJ’s floor pan with raptor lining Wednesday, it’s impressive stuff.

[@carbonshocks]

Nice!!

[@rodneyclements6190]

Yay Joe!!! You work hard brother!! Well deserved 😊 Got to watch this on my birthday!!

[@peterwall737]

I'm in the UK and I love it 😎 top job boys

[@uberangelmendoza5080]

So I commented on the wrong video earlier I was wondering how the raptor liner held up over the bare metal and bondo on the hood ?

[@carbonshocks]

Still just fine

[@uberangelmendoza5080]

Thanx.. looks good

[@MrBillsfishin]

That looks great gentlemen. Really nice finished product. I think that blue is going to look awesome when the whole Jeep is done.

[@carbonshocks]

That's the plan!

[@rossm1780]

Like it, good job, nice colour

[@AR-sy9eo]

Like the color, I have the same plan for my cj7 in yellow

[@jbkennon]

Looks great guys. What is the color exactly. It doesnt look like a standard blue. It appears to match my truck color and i want to spray it with raptor to closely match the existing color.

[@JasonFaul]

I was worried that it was gonna look crappy. It turned out the exact opposite of crappy. Looks great guys!

[@carbonshocks]

For as fast as we knocked it out, we are very happy with the results. It does need a touch up coat in a few spots but overall the body work turn out really good.

[@bourbonthebiscuit]

Love that colour 👍👍

[@TrustingJesus67]

It took me a little bit to recover from the fist bump to my jaw. That does look good and should protect it from the dainty driving you do. :) See you next time and God Bless

[@randylenz254]

I'm glad you posted this video. I'm currently spending my time off for Covid FINALLY getting my cj7 rock crawler built and I'm planning on doing the entire body with this same product. Very on point. One thing I've seen on most of the instruction videos, including raptor liners is you must coat all bare steel or filler with an etching primer. Of course they recommend the one they sell. Have you found this to be an issue?

[@carbonshocks]

well...have to be honest.. I didn't see anything about not coding bare steel. I guess time will tell

[@gafrers]

Fantastic color choice and results. Loved seeing the whole process. Keep up the great work. P.S. Get some sunscreen seriously 🌞

[@jrod7359]

What kind/ type of air compressor is recommended to spray on the Raptor liner. I tried using something cheap, and immediately I noticed losing air pressure.

[@daverobillard7783]

Love the color

[@carbonshocks]

Thank you! We really like it to! joe is happy.

[@lawrenwimberly7311]

Bondoglass would be a good addition to your inventory for the body of that jeep... it has glass fibers, is super strong, and is great for re attatching cracked or broken off fiberglass parts

[@carbonshocks]

Already have it! the pre impregnated fiber make for simple repairs all in one for sure! :) 100%

[@lawrenwimberly7311]

@@carbonshocks excellent... it is basically marine epoxy doused with fiberglass strands till it's the consistency if asphault tar... love the stuff for 'glass repairs

[@paulwelch5570]

What color blue is that. Looks great

[@kennyfofo]

WOW! I really like the color and like you said the texture covers so well. What size mig wire do you use and what are the settings for welding sheet metal. I am working on a 1954 chevy 5 window and could use some advice. I love your content keep on doing what you do!!Ken

[@carbonshocks]

we only use .35 and with the welder we use ( vulcan Mig ) it was 3 & d... whatever that correlates to. Id have to look i up for actual wire speed and amperage.

[@kennyfofo]

@@carbonshocks Thank you for the info you guys keep crushing it in the dirt!!

[@alexmarinelli5204]

How would it have looked with some clear coat ? Or is it shiny enough?

[@lawrenwimberly7311]

in the old days we used aluminum screen wire for that (big dent)

[@carbonshocks]

interesting. I could see that working!

[@lawrenwimberly7311]

@@carbonshocks old days to me were the 80's... our engines were crap so we customized the hell out of the bodies

[@NathanRittenhouse-i7d]

Hope to more videos on the jeep

[@gusser2121]

Hah! First time I've seen this used as a finish. And no primer needed. Looks cool! BTW, 15:27, Daniel doing his best shampoo model impression. Uh, needs work. ;)

[@lukaszdobek4160]

Hi! Do you remember the colour RAL number?

[@shanewright6958]

The color looks good 👍👍🇨🇱

[@justinhobart8747]

👊😉 fist bump for you both it Looks great!!! Please suggest this stuff to Preston for his Jeep Vette tub. I might like to use this stuff in the future myself, can you share a link of where are you got it??? Daniel, 👊😉 fist bump for you helping out where you could with your church... I'm sure the sunburn was worth it!

[@carbonshocks]

Preston is fine. His tub is done.

[@scholes2012]

Like the colour, looks like old school sand buggy.

[@carbonshocks]

Thanks! We are really happy with it!

[@AlanDavid1955]

HEY DANIEL , DO YOU LIKE USING A AIR SANDER VERSAS A ELECTRIC SANDER ?

[@carbonshocks]

Dont own an electric sander so I cant compare. Air runs out with 2 sanders going though.

[@DrHughWegwerth]

Nice job

[@AlanDavid1955]

LOOKS GREAT !

[@carbonshocks]

Thank you!

[@rollerdragon]

i am a bit surprised that Joe didn't hammer the dent and the pull hammer holes. must be a good reason he couldn't, like support structure or sumptin....... not a fan of body filler, but the tub is fiberglass, so... groovy!

[@carbonshocks]

there was no real way to hammer that dent out because of the support on the inside. a slide hammer may have pulled the dent out even more but it still would need a bit of filler. overall we're happy with what we did.

[@rollerdragon]

@@carbonshocks i saw... spoke a bit early, though. its an off-roader, being raptor lined.... and I'M worried about metal husbandry?

[@joel4491]

The color looks a little purple on the video. But you guys killed it with the spraying it on very good job guys you should be very happy with the results

[@carbonshocks]

you are right! on Camera it has a purple ish haze to it. today its a very deep navy blue and looks good.

[@FangOfTruth]

From a distance it looks like a heavy metallic blue you would see on a fiberglass boat.Almost matches compressor.

[@carbonshocks]

kinda yeah! Got that Kobalt blue going for it lol

[@wjpreslar]

Very nice. My grandfather used to do a bit of body work and I've seen him used expanded metal the same way you used that mesh. The Bondo squeezes through the little holes and "mushrooms" on the other side. The little mushrooms act as anchors so that the cured Bondo doesn't flake off due to vibration. Thick Bondo will do that if it is only adhered to the surface. When I saw all those drilled holes under the original repair I thought it was either a dent puller or they'd drilled holes in the hood for the same reason. Thanks for showing why they didn't just fix the hood the first time.

[@carbonshocks]

I was thinking for a while trying to figure out a plan and it was just a random thought that seems to have worked great! the Raptor Liner holds well so we dont anticipate it should chip or fall apart. The filler is much thinner than the previous attempt for sure so that helps a lot too.

[@pompogarage9819]

Ral code?

[@kevinhamling1963]

Hey guys Kevin here from Australia. The body liner looks awesome. Could i say i liked this video to a point . You should have less time lapse and music. Explain things as your doing it . I would prefer to hear the sounds made by whatever your doing not blaring music. Hope this makes sense. Keep making videos your content is still great. ✌ Peace guys

[@carbonshocks]

Everybody told us More time lapse and less talking.... cant win for anything.

[@kevinhamling1963]

@@carbonshocks 🤣🤓

[@kevinhamling1963]

@@carbonshocks how about you fly me over and I'll help you out.

[@etchels85]

That’s a fucking lovely colour/texture mix

[@robertohughesyo]

love that colour : ) ( notice the correct spelling ) : )))))

[@wjpreslar]

color . . . . Fixed it for you. 'MURICA!!!!

[@carbonshocks]

lol :)

[@TheTuttleCrew]

Awesome 😎! I knew there was something different about you two! Why would guys work so hard to help other guys automotive dreams come true... Joshua 24:15 But if serving the LORD seems undesirable to you, then choose for yourselves this day whom you will serve, whether the gods your ancestors served beyond the Euphrates, or the gods of the Amorites, in whose land you are living. But as for me and my household, we will serve the LORD."

[@carbonshocks]

We try.... youtube doesn't like us though probably scraping the channel soon. just to much work for a waste of time.

[@TheTuttleCrew]

Team Olympus What you (Daniel)shared about helping at church. There is a hurting world wondering why two guys would give up free time to serve others. Start sharing the reason for the hope you have. A little here and a little there. I mentioned giving a background how you two guys teamed up. Share a little of your past to present and let people see more of you. Think of it 10,000 people almost are following you! That is incredible. If you do it do it for one person at a time like your builds! We (my family) enjoy you guys. Just pray about what I mentioned... Thanks for putting out clean, fun, and helpful content!⭐️⭐️⭐️⭐️⭐️

[@carbonshocks]

I think we may be have 500 to 1,000 people that actually watch our stuff... Just because KZbin says we have 10,000 subscribers doesn't mean anything. there's so many channels with a third of our subscribers that get 100 times the views we do. I don't really have an answer but I'm just exhausted trying to find it.

[@TheTuttleCrew]

Team Olympus I’m sorry! I will be praying for you guys. Put 1 or 2 at most a week to make people hungry and at the beginning of each video ask people to like, subscribe, and share and let people know it really helps you out. As a guy I don’t like ask people for help but when I have people are amazing!

[@johnsaunders1694]

@@TheTuttleCrew Same here man. They are good guys and all I have ever seen of Daniel is someone who wants to help anybody and everybody. I hope he pulls through this funk and comes out stronger. The world needs more people like him and joe. Im honestly sad to see him want to throw in the towel. He has helped so many people. One time a buddy broke his jeep in the mountains and with one phone call Daniel went up at 10Pm at night and helped take care of the guy, stayed up all night towed his jeep to his shop fixed it and didn't charge him a dime for it.

[@lawrenwimberly7311]

now it needs lemon yellow wheels to compliment the electric blue

[@carbonshocks]

idk about that haha

[@lawrenwimberly7311]

@@carbonshocks hey, I had a BMX bike in the 80's, electric blue with yellow mags... it rocked LOLOLOL

[@michaelcaraway2305]

Maybe take it to Preston (Garage Idiots) and have him do a clear coat on top of it?

[@carbonshocks]

No need for it. Raptor liner is made to not need any additional clear coating.

[@justinhobart8747]

First

[@carbonshocks]

Heck yeah buddy Welcome back to the top!

[@nunabizness]

Garage idiots brought me here. This channel should be called “other garage idiots “

[@davidmyers5702]

My body shop instructor would fail us if he found us applying filler over paint

[@carbonshocks]

Good thing we're not body guys LOL we made it abundantly clear this is not what we do.

[@davidmyers5702]

@@carbonshocks ...yeah he was a real dick about it but soooo many you tubers do it he’s probably rolling over in his grave...lol