I SPRAYED MY TRUCK WITH RAPTOR LINER! AMAZING RESULTS

In this video, we'll be painting our entire truck with the TINTABLE RAPTOR LINER. This paint is crazy easy to use and the results are amazing! If you're looking for a way to improve your truck's appearance without spending a lot of money, then this is the video for you! The TINTABLE RAPTOR LINER is a fast, easy and affordable way to give your truck a makeover. Watch the video and see for yourself how easy and affordable it is to paint your truck with the TINTABLE RAPTOR LINER!
If you want to see the first episode in this build click the link.
• Ep1 SUPER DUTY Front E...
Tintable Raptor Liner HERE!!!! - amzn.to/3eCZoAy
Black Raptor Liner HERE!!!! - amzn.to/3jdgELW
Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK
Painters Tape - amzn.to/3qnQQ34
Painters Tape and Drape - amzn.to/3eDlBhV
20 Gallon Air Compressor - amzn.to/3QBxnqa
------------------------------
------------------------------
🔶 Support our Channel by visiting our Amazon Storefront here - www.amazon.com...
🔶 or JOIN our PATREON! / jmrrebuilders
🟥 Our Latest Tools!
2019 Everlast PowerMTS 211Si MIG TIG Stick 200amp 110v/220v Multi Process new Welder - amzn.to/3bIGHrC
Welding Wire - amzn.to/39EyIJg
Automatic Center Punch - amzn.to/39AczMm
Flex Grip Gloves - amzn.to/38MVFuQ
ZENY DC Inverter Plasma Cutter 50AMP CUT-50 Dual Voltage 110-220V Cutting Machine - amzn.to/3x3xGlc
🟥 Our Latest Tech:
Sametop Head Strap for GoPro - amzn.to/35KnDp4
Sametop Check Mount for GoPro - amzn.to/3qoWaRH
🟥 Tech we love and Items we are looking to buy. You may love them too!
DJI OSMO Mobile 3 Gimball - click.dji.com/...
DJI MAVIC Mini 2 DRONE - click.dji.com/...
DJI MAVIC Air2 DRONE - click.dji.com/...
DJI MAVIC 2 DRONE - click.dji.com/...
DJI OSMO Pocket Camera - click.dji.com/...
🟥 Merch! Check out our website at www.jmrrebuilders.com to buy JMR t-shirts, Hats and Beanies as well as all our Amazon products!
🟥 Thanks for Subscribing and supporting this new channel! You can also subscribe to our channel here - / @jmrrebuilders
🟥 See behind the scenes and teaser content on our Instagram - / jmrrebuilders
------------------------------
Track: Hot Summer Party - MaikonMusic [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Hot Summer Party - Mai...
Free Download / Stream: alplus.io/hot-...
------------------------------
------------------------------
🎵 Download Link: / audiolibrary
►Copyright: You're free to use the song and you can also monetize the video on KZbin, just paste in " " into your video description..
Du kannst diesen Song verwenden und dein Video auf KZbin monetarisieren, du musst nur " " in deine Beschreibung einfügen.
►Follow Diamond Ortiz
● / diamondorti. .
● / diamondortiz
● / diamondortiz
● di....
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►TWITTER:. / parodoro
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
License
Creative Commons Attribution license (reuse allowed)
------------------------------
Painting Our Entire Truck with Tintable Raptor Liner -What could go WRONG?

[@ScottyLovey]

I would never in a million years do a job like that without a respirator. Y'all are nuts.

[@JMRRebuilders]

Thanks for comment and support. We appreciate the honesty.

[@rockod8880]

The ability 2 adapt push through solve problems and keep it moving salute to u gentleman

[@JMRRebuilders]

Thanks brother that's truly encouraging and a really different perspective. We appreciate the support

[@mariojuarez6914]

Better entertainment than Amazon Prime, Netflix, CNN, and Fox combined…thanks KZbin

[@JMRRebuilders]

Heck yeah brother thanks for the kind words gladnyou enjoyed it. Check out our channel for all our other builds. Wo glad you found us.

[@CPsGarage]

it came out really nice. normally I'm not a fan for bed lining a complete vehicle

[@JMRRebuilders]

Thanks brother we appreciate the support. It Def depends on the person. Keep getting after it brother.

[@willbrown8394]

Just did mine in black, personally I love how y’all’s looks with the two tone!

[@JMRRebuilders]

Heck yeah thats awesome. We also prefer the 2 tone. It's the contrast. Thanks for comment and support

[@JMRRebuilders]

It cost about a grand to do it all. Thanks for comment and support

[@leenieminen8457]

These guys are REAL! great job!

[@JMRRebuilders]

Thank you we appreciate the support

[@HattemMorse]

Good to see you boys! Hoping all the crazy weather passed you by! Keep up the awesome work!

[@JMRRebuilders]

Heck yeah brother thanks for the comment and support. We made it through unscathed. Thanks brother and keep getting after it

[@jasonhughes3587]

Ive been waiting for 3 weeks to do mine because of weather, it keeps raining. I heard that Raptor is not supposed to get wet for a couple days after you spray it. This video makes it seem like it does not ruin it. Hmm

[@JMRRebuilders]

It's not ideal for sure. We haven't had any issues since we sprayed it. Good luck. Thanks for comment and support

[@JamesBrown-xq9qd]

Well done boys, Mr. Safety is at it again. When all else fails get a bigger grinder. Truck looks mean like it’s owners. Keep getting after it.

[@JMRRebuilders]

Heck yeah brother. Thanks for the support.

[@gldsmith61]

That look's so good ,if I didn't know better, I would think ya'll new what you were doing. he he. Thumbs up

[@JMRRebuilders]

Thanks. It really turned out amazing. We appreciate the support

[@catchthisSK]

Looks great. I'm about to do my 97 Wrangler. Wish me luck!!!

[@JMRRebuilders]

Heck yeah brother do it. You will love it. Good luck

[@eyesalooking]

What a workout. You dun good.

[@JMRRebuilders]

Heck, yeah, brother. Let's go. Thanks for the comment and support.

[@lukeperry085]

I love that you sprayed the wheels as well. I've thought about doing that, but I was concerned that tire mounting machines would scuff it. How has your experience been with this?

[@JMRRebuilders]

Recommend having balanced before spraying. The orher issue is when you have them balanced in the future if they put front rim side weights can cause issues

[@atlantaswelder]

Dude this is gunna be an AWESOME dad ride!! 🇺🇸🇺🇸🇺🇸

[@JMRRebuilders]

Heck yeah they call them the dad van. I love it.

[@brockfraley123]

Awesome Video!! I'm gettin' ready to do a Tahoe in white and black!! Thanks!

[@JMRRebuilders]

love it good luck. Thanks for comment and support

[@brockfraley123]

How is the bedliner paint holding up? Will it last or does it start to chip?@@JMRRebuilders

[@JMRRebuilders]

It has really done well. The only reason any of it that chipped is the chrome bumper because it was hit. Other than that, it's great. The only issue is I park under trees the majority of time, and because it is textured, it holds onto organic material that then leads to mold and other things. So have to scrub it or not, park under tree and keep in shaded area

[@enjoythesho1992]

Dang guys put on some respirators next time

[@JMRRebuilders]

I believe jason who was spraying had the respiratory on the whole time. Thanks for comment and support

[@gh0stmal0ne]

Thank God nobody died. Turned out great! Music: 10/10

[@JMRRebuilders]

Yes we are thankful to our Lord and Savor that there was no serious injury. Thanks for comment and support

[@stevenoe6395]

Good job guys!!!!!!!!

[@JMRRebuilders]

Thanks brother and good luck to you on yours

[@mikefarrell2333]

OSHA approved work shoes - at 0:41 🤣

[@JMRRebuilders]

Absolutely safety third. Let's go. Thanks for comment and support

[@detroitdiesel7074]

Did you guys do the 08 front clip conversion? Or was it someone else. Oh and does it have a 6.4 or 6.0?

[@JMRRebuilders]

We did the swap our selves we have videos on the channel. It's the 6.8 v10 in the excursion. Thanks for comment and support

[@royaldeepbrar3965]

Does it fade over time ? If it does fade could it be repainted without sanding entire thing again? Looks like it might protect vehicle from rust

[@JMRRebuilders]

the darker it is the more it is likely to fade. I am sure it has faded some. They say you can clear it and it wont fade. I believe just clean it and respray it but not certain. If done right it can help the vehicle but to be honest not sure it can protect it since the nice body is now coated. Also if not done right rust forms under the layer. Good luck thanks for comment and support

[@Jim_Tabor]

Where did you get that red wire wheel, I have a Crown Vic I want to spray, thank you

[@JMRRebuilders]

From Amazon we love it. Here is the link. Good luck amzn.to/3xh0LLK

[@Jurnymn]

Good job. How many coats did you guys do? How many quarts for everything? I'm going to do this to my 01 XJ in a month or so.

[@JMRRebuilders]

Thank you. We did 3 coats the final coat is a mist coat. It took 9qts of tinatable and 3 qts of the black. Good luck.

[@supersasquatch]

did you remove the plastic sidings? or just painted over (i'm doing an excursion repaint myself soon)

[@JMRRebuilders]

I removed all the plastic cladding. I don't care for it at all. Good luck. Let us know if you need anything. We appreciate the comment and support

[@ZZangGaming]

You guys are hilarious , subscribing for sure! 😂

[@JMRRebuilders]

Heck yeah thank you so much for the sub and kind words

[@botelloheritage12]

Looks great 👍🏼 thanks for telling us about the FB group.

[@JMRRebuilders]

Heck yeah thank you for the support and comment.

[@kylesmith166]

Hey guys what was the color that y’all mixed in with it ? Thanks and looks awesome !

[@JMRRebuilders]

We used the excursion factory color. I can't remember at the time. Thanks for the comment and support brother

[@nathanspilker277]

Hey there. Thinking about doing this to my truck. I have no idea really of what I’m doing, what kind of sandpaper should I use and how do I mix the colors

[@JMRRebuilders]

It's pretty simple to mix we go over it in the video. Also I'll put the link to the sand wheel we used below. Thanks for comment and support. Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK

[@bandjolyn]

I'm about to do my 06 Burb in this exact same color combo. It looks awesome! I have to go all the way to bare metal though (water based primer from factory), any suggestions on how to remove all that as quickly as possible?

[@JMRRebuilders]

That's sounds awful. I think they sell strippers and such for that but never had to do that so not sure. Thanks for the comment and support.

[@JPU89]

Looks great! Did you end up spraying more then the initial 4 quarts?

[@JMRRebuilders]

Thanks for watching. We used 9 bottles of the tintable raptor and 4 bottles of the black. Let us know if ya need anything else.

[@isiahadderley1539]

How much raptor liner was needed for the whole vehicle. Have a 95 chevy silverado k1500. Wondering how much i need because i also have a camper on it

[@JMRRebuilders]

@Isiah Adderley hey brother we used 9qts of the tintable and another 4 qts of the black. Good luck

[@aaronrodriguezs2670]

What is the red attachment u have on the grinder and by the way the truck looks great

[@JMRRebuilders]

Thanks brother we appreciate the support and comment. Here is the link to the wheel. It makes life easy. Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK

[@troybest6456]

Great job

[@JMRRebuilders]

Thank you for the compliment. We appreciate the support.

[@RebelRicans]

Looks great. What color did y'all use? Wanna spray my son's 98 4 runner please.

[@JMRRebuilders]

thanks for the comment we appreciate the support. We had the factory door code form the excursion made into a gallon and used it.

[@RebelRicans]

@@JMRRebuilders Thank you!

[@Giroux68]

Bad ass!!

[@JMRRebuilders]

Thanks brother we freaking love it.

[@tonymengela3575]

I really want to do my 2005 grand cherokee with Im thinking white or light olive drab

[@JMRRebuilders]

Do it. You will love it. Let us know if ya need anything good luck. Thanks for comment and support

[@stevegarwood1382]

What is that sanding wheel?

[@JMRRebuilders]

Hi thanks for the comment and support. Here is the link. Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK

[@Powerstroke431]

Well, so much for not getting it wet the first 24 hours 😂😂😂

[@JMRRebuilders]

Yeah, it didn't exactly go as planned or desired. However, it has done just fine. Thanks for comment and support

[@Powerstroke431]

@JMRRebuilders sprayed my F250 yesterday and not even 12 hours later it POURING rain lol 😆 🙄

[@JMRRebuilders]

@chriss.7556 well that flippin stinks. But that how it is sometimes. How did it turn out?

[@codymayberry6437]

Where did you get the brush for the grinder? All the kits I’ve found don’t come with it.

[@JMRRebuilders]

Here is the link good luck. Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK

[@codymayberry6437]

@@JMRRebuilders thanks!!

[@JMRRebuilders]

Absolutely

[@tubular031]

I have a f350 crew cab long bed I am going to be doing soon. you said you did 1 light coat on the whole ex with 4 bottles, How many did you end up using total? 8? or more? I will need a little less since I dont have that big roof to paint.

[@JMRRebuilders]

I believe if I remember correctly, 9 total. Thanks for commenting and also Def send us pics when done would love to see it

[@brokenforevermore1107]

First & Foremost; SEMPER FI Brother 🇺🇸 Secondly; I want to do my GMC Canyon in same 2 tone Dark Grey with Black Trim! How did it take on the rims & how many coats? Did you paint all the trim with Raptor Black too?

[@JMRRebuilders]

Hey love it semper fi devil. We did 3 coats with all colors. Gotta scuff wheels frist and recommend adhesion promoter. Thanks for the comment and good luck

[@77blawrence]

How much did it take? Going to do my 2000 Excursion

[@JMRRebuilders]

It has done great and is holding up well. Good luck

[@77blawrence]

but how many bottles did it take? @@JMRRebuilders

[@JMRRebuilders]

9qts of tintable and 3qts of black. 3 coats on body. The 3rd coats a mist coat

[@nagphillips7886]

What was your psi setting? Thanks

[@JMRRebuilders]

Hey brother thanks for reaching out. We did 80psi on the gun and 120 on the tank. Thanks for watching and the comment.

[@nagphillips7886]

@@JMRRebuilders thanks so much.

[@JMRRebuilders]

Absolutely good luck

[@andrewrolfsen7230]

how much color tint do you need? amazon doesn't really say

[@JMRRebuilders]

3oz per mix. When you buy the tintable it is already filled to meet the tight mixture of hardener and tint. Good luck and let us know if ya need help.

[@dalepeters8793]

How many quarts did you use, and how many coats

[@JMRRebuilders]

We used 9 qts of tintable and 3 qts of black. We also did 3 coats with the final being a mist coat. Good luck and let us know if you need anything else.

[@taylorshiver3284]

What is that first red attachment wheel?

[@JMRRebuilders]

It is a sanding wheel. Here is the link and thank you for comment and support Red Sanding Wheel HERE!!! - amzn.to/3xh0LLK

[@Mbcoinsnet]

So you guys did only 1 coat when noting the spray was light? Did you do 2 just not show it. I am doing a ram 1500 crew cab in a 2 tone. So I can get away with 4 quarts for top and 4 for the bottom.

[@JMRRebuilders]

We actually did a total of 3 coats. 1 coat is intial coat. Then apply a second and the third coat is a mist coat with higher psi and a further distance off of the truck to mist over coat. Good luck brother. Thanks for comment and support.

[@Mbcoinsnet]

So you guys used 3 kits or a total of 3 gallons. @@JMRRebuilders

[@JMRRebuilders]

Esch kit does not equal a coat that's not how it works. We purchased 3 gal of tintable and only used 9 parts of the 12. We also ordered gal of the black and used only 3 parts of that gallon

[@JMRRebuilders]

We only used black on bumpers and wheels

[@jonathankitchens6536]

How much raptor liner product was required for this project?

[@JMRRebuilders]

We used 9 qts of tintable and 3 qts of the black. Good luck.

[@jonathankitchens6536]

@@JMRRebuilders Thanks for the quick reply! I have a 2003 Excursion that I swapped a 6.7 Cummins into it . The raptor liner will finish it out just right!

[@JMRRebuilders]

I love it. I want to body swap the body omof our ex onto a 6.7 f350 frame. Someday I guess

[@tylererickson4248]

The problem with the grinder was written on the sides

[@JMRRebuilders]

Yeah had nothing to do with the fact we had a part on it twice the size it is rated for. Thanks for the comment

[@joeladams4779]

Spend some money and get some real extension cords and the grinders won’t smoke. Those extension cords are fine for Christmas twinkle lights not for power tools

[@JMRRebuilders]

That might be the case but worked fine with the 7" grinder with no issues. We believe the issue was the fact we were using a 6" head on a 4.5 tool. Thanks for comment and support.

[@ConnerReed-dz8hl]

Ole Joe an extension cord expert. Could thing we got guys like you in the world joe

[@krazd360]

Murphy’s Law

[@JMRRebuilders]

Yeah brother for sure. Thanks for comment and support

[@allan2502]

What psi you shooting?

[@JMRRebuilders]

First and second at 80 and final mist at 100. Thanks for comment and support t

[@allan2502]

@JMRRebuilders thank you Is the higher the psi the smoother the texture?

[@JMRRebuilders]

@@allan2502 yes it does.

[@allan2502]

@JMRRebuilders ok thank you so much...keep the video's coming your doing a great job 🤙

[@JMRRebuilders]

Thanks brother

[@Tannehillin]

Must not look that great. Why not do a close up?

[@JMRRebuilders]

That is def a perspective. Honestly there are parts Im not happy with but that is our fault not the product. However it has now been a year and half and I still freaking love it. Would do it to anything that you want that more aggressive look and not worried about the pretty paint job

[@Bori85]

Just use air tools

[@JMRRebuilders]

Yes that is one approach. Thanks for comment and support.

[@darrellhowcroft6941]

Stupid is as stupid does.... .

[@JMRRebuilders]

Yep and here you are doing that. Thanks for the support

[@Oldtimeytools]

Omg the background music, had to watch on mute

[@JMRRebuilders]

Well we appreciate the support glad you watch it anyway. Let us know if you need more info or help. Keep getting after it.

[@Oldtimeytools]

@@JMRRebuilders likewise!!! 🙏🏼 Merry Christmas

[@256garage]

Nothing at all lol

[@JMRRebuilders]

Thanks brothers

[@stevencolbert2304]

That's some jake-leg garbage.

[@JMRRebuilders]

Not familiar with that phrase.... but im assuming you don't like something. Well thanks for helping our our channel by leaving a comment!

[@sccolbert]

@@JMRRebuilders you sprayed right over the emblems. It’s streaked to hell. Its fine for a hillbilly job, but damn you’re acting like you’re experts in the video. Some attention to detail and you’d be golden.

[@JMRRebuilders]

Ya think maybe we sprayed over the emblems on purpose. Talk about attention to detail it is an 08-10 super duty front end and has powerstroke badges. It's not a powerstroke so why not paint over them. Also it didn't run anywhere paint turned out great. We ain't professionals at anything brother just some friends trying to help others and have a good time. Seems like ya may need some happiness in your day home.

[@sccolbert]

@@JMRRebuilders you speak the truth brother. I dont mean to come down on you personally. Im really just frustrated with the lack of value that people place on quality work these days. I wish I had a youtube channel that earned some side income, but im just chasing big jobs that end up not paying after i’ve done the work. I guess it’s jealousy. You and I would probably be friends if we met in person. All the best!

[@JMRRebuilders]

Hey man. We appreciate that. We love doing the channel.... just to set the record straight. We are making just over a hundred a month doing youtube.... not thousands. We are trying to build a community of people just trying to get after it. Also.... the raptor looks streaky until it drys. Thanks for the comment!

[@nabat69]

Ваша покраска ужасная((

[@JMRRebuilders]

Awesome thanks for the comment and support.