How to: Read a RC setup sheet

RC Box Club - rcboxclub.com/...
Become a channel supporter on Patreon! bit.ly/3pVGhkZ
======================================
Current Cars
My 2wd buggy: bit.ly/2Sgmsb3
My 4wd buggy: bit.ly/2QbUMkN
My 2wd ST Truck: bit.ly/399jsD9
My 1/8 EBuggy: bit.ly/396Jlne
My 1/8 Nitro Buggy: bit.ly/32ccQ5R
======================================
What’s On My Cars
Best 1/10 Tires: bit.ly/2Wc8l7I
Best ⅛ Tires: bit.ly/38NVq0I
Fast 13.5 Motor: bit.ly/2ZkXHxh
Fast 17.5 Motor: bit.ly/2OjiQ41
Motor Fan: bit.ly/2AXe6Pm
Nitro Engine: bit.ly/3gSwZlL
My Battery (Super Low IR): bit.ly/2IrD1sG
My Radio: bit.ly/2ZmePTt
My Servo: bit.ly/2Rpjcel
My ESC: bit.ly/35SwqTP
ESC WiFi Module: bit.ly/2GdWkUB
Bodies: bit.ly/2OgpEzZ
======================================
Pit Space Stuff
Super Powerful Charger: bit.ly/2wFtAoe
Power Supply for Chrager: bit.ly/2Imx5Bj
Pit Light: bit.ly/2ASCYHP
Parts Box: amzn.to/2OkQqGF
======================================
Tools
Fav Allen Wrench Set: bit.ly/2rIUG8X
Fav Wheel Wrench Set: bit.ly/2jUR3IH
======================================
Shop
Fav RC Store: beachrc.com/?a...
======================================
My Resource for Setups:
Super Secret Website: bit.ly/2CAdpWQ
======================================
Video Equipment I use:
Main Camera: amzn.to/3aV5fNg
Main Lens: amzn.to/3sytgzM
Zoom Lens: amzn.to/37NuGhx
Macro Lens: amzn.to/3qXDUQ8
Main Mic: amzn.to/3krcuQ5
Vlog Mic: amzn.to/3bMhXNm
=====================================
Social Media Links:
Instagram: ryan_stiles bit.ly/2nZxPUO
Facebook: Ryan Stiles Harris bit.ly/2GdbVUB
Patreon: bit.ly/3pVGhkZ
=====================================
#rc #rccars #rcracing

[@extec101]

looked at some sheets of the pros and some of them is good to the point they mark every setting on c-d block and al the other setups gets useless when you dont know where to set the rollcenter.

[@primoservices5636]

Dam ur good lots of knowledge. Appreciate the content. Thanks. Primo

[@zach_rc6356]

Ryan this is hands down the most helpful video I have seen regarding this topic. Thank you sir!

[@eyemastervideo]

Sooo many settings. I'm still learning how to drive, so most of those settings are too much for me. Tires is my first thing to make sure I dial in, then suspension oil and diffs. Nice to see the importance that this is an ensemble and not just unique points here and there.

[@aidanrc46]

A great refresher for all Rc racers

[@kjs6469]

Thank you, I appreciate all your support and help. I knew about the set up sheet but didn't know about how to make it work to an individual advantage. Thanks

[@jprme7588]

Lmao it really goes to show how good Team associated is when he has associated parts in his tlr buggy 😆

[@scottdaubenspeck2291]

Aweaome video. Jus bought the 22x4 myself. Loved the build waiting on electronics then gonna break it in.

[@cmr7755]

Hey Ryan like your videos on the RC set ups and stuff just now getting around to building a 22.5.0 AC For carpet small tight track do you have a current set up sheet for a car like this thank you it is a 17.5 spec class

[@jerryvolpini7987]

Great video, Ryan, setup is key! One note though, using Ryan Harris' setup but not driving like Ryan Harris can lead to a lot of frustration. I recommend the kit setup in most cases, then the racer can make setup changes as their skills progress.

[@rcracer3235]

Hi Ryan you have very good videos and I appreciate all of your hard work I am new to rc and I just bought a used Tekno nb48.3 how would I find someone in my area to help me to get my buggy ready for its first lap around the track?

[@dustymorris3268]

thanks man! I'm new to rc racing and this helps a ton!!!! I liked and subscribed!

[@tenncutt]

What knife is that you opened the box with?Great video man

[@sixtenallingersandgren6674]

Another great video! Thank you Ryan! Tracks are finally starting to open back up again here since they closed in october.

[@SweatyHanes]

That tool stand is insane.

[@matthewsamec5286]

Thank you, thank you! this kind of content is amazing for me as a newbie (and my 10yr old son) to be able to comprehend the sport better and increase the fun we have without having to figure out everything through trial and error. Mucho gracias!

[@keithhayter3178]

Thank you for all the info. Anyway you could start breaking down why and when you would want to change the different adjustments.

[@GeorgeGhazarian]

Thanks man, this video was so helpful because I know the basics like camber and toe, but that’s about it. Super helpful video!!

[@toniroberts3586]

I’m completely new to RC and your vids are amazing and has helped me so much to understand what does what and things to consider. Thanks a bunch from London

[@joshuaneese_havick]

Do you have an updated link for your "super secret website"?

[@bradygamble214]

Hope to see more on setups and loved the how to videos hope to see more of them. As a long time RC enthusiast but new to racing they are helping me tremendously.

[@wrightrc3976]

Nice we need more content like this. Thank you

[@dustinpeters8609]

It would be cool to see a video on setup changes from a high traction clay setup to a old school loamy dirt “Mx” style setup and how they’re opposite changes to make more grip in each track

[@TheTmann3]

Awesome informative video as always! If you need a video idea, one thing I've always been fuzzy on is all of the FLUIDS involved in RC. It would be awesome to see a comprehensive overview of all the different types of fluids you use and which ones to keep multiples of. I feel like fluids/oils/greases/threadlocks/glues/cleaners are kinda overlooked and your presentation style would be perfect for explaining all of it.

[@MrDuke1208]

super good video. makes sense. and just want to say thank you for all your b64 videos. it was them that got me started driving. and of course bought a b64 for god's sake continue with the good videos

[@robertglenn9993]

Still a little confused on pill inserts. When you see a set up sheet showing C-D blocks I can’t tell where you would be looking at the block from. Is this looking at the block on the side where you would be able to see the .5 or 1 on the pill or looking from the rear or front of the car? Tia for any help, it’s greatly appreciated. I come from some old school e buggy roots and am just getting into racing 1/10. Im not used to car with this level of tuning ability and these newer ways of tuning(pills). Car is a tlr 22 5.0 btw. Cheers everyone and let’s have a great year of racing!

[@maxxdavidson7795]

Thanks for the video Ryan!

[@67smit]

What's your set-up on you 22x4 is it the same I just pick up the 22x4

[@originalkontrol]

Thanks for the great info, Ryan. I have been in the RC for quite some time, and I'm fairly knowledgeable about the basics, but have just decided to start trying my hand at racing. Picked up an EB410.2, and I'm ready to start diving into the more intricate stuff. LOL I think I'll be watching a lot of your videos! Thanks again!

[@stevemarcil1911]

This video was great!!! Great job explaining and going through everything. Keep up the great work! Can't wait for the next video

[@lsrteg]

Hi Ryan i noticed you have holes in front of your body just behind the front wheels. What is your purpose for that? Thanks.......

[@chetclark8666]

What weight oil do u run in the center diff?

[@Jut77]

Thanks I start my laydown build tomorrow, back into RC's after 29 year's

[@jamesbooth5522]

Thanks Ryan , as always love your work and passion for the hobby ☺️

[@robertblack5147]

Ryan, The work you do is the best! I would like to know if you could create a travel itinerary of the tracks in your area for a travelers to visit. Track a day we'll say. Let us say a two week period, no more than 150 miles between the most distant tracks. All points from your desination. Sound feasible? Not a stocker, Spouse travels for work.

[@royson58]

Nice video. I really think that having access to more setup sheets is very helpful. Maybe you can talk more Team Losi guys into sharing their setups more often. Even a "generic" setup kind of like the one in your video would help tremendously. BTW, I noticed the photo of Mr. Densford was in front of the famous Golden Driller in Tulsa, probably taken at the Chili Bowl race. They have both a Chili Bowl RC, and a big boy Chili Bowl every season at that venue.

[@CH-uj3gx]

TLR oil is thicker than Associated, if you compare the CST values.

[@hunterking5514]

Great video. Sharing this with all my locals

[@RyanHarrisRC]

Made this one for you ❤️

[@hunterking5514]

@@RyanHarrisRC now I can read em, but that doesn’t mean I understand everything 😂

[@gavush]

Not related, but I'm having a hard time to find an avenue to present my question, which is: sportsman / pro drivers... how do you decide who gets to stand where on the driver's stand? Is it order of qualifying first pick? I know I like certain angles better than others. How do you figure out where you get to stand in the mains?

[@smoke4520]

Another great video... Can you explain antisquat for running on carpet.

[@Derrek_V]

#beachrc for the win!!😋

[@TKommando]

I have the 22-4 from TLR, the previous 4wd buggy. They had whole parts for the rear for adjusting toe and anti-squat. I kind of like the pill system better and wish I could convert it to use that, but oh well.

[@MileHighScaleModeler]

Ryan, I was watching your Quarastream video from 1 year ago and you went over Dakota and Zeke setups on the 5.0 TLR. You didn’t go very in depth on what the crazy pistons they were running on their setups. Can you please do a video on what they crazy piston setups actually mean with a visual showing what is actually happening with their pistons on the setup sheets?

[@timothytimpe6183]

Great topic, is there any way you can go through a video of going through an actual setup like you doing the setup on your car. This is a great explanation but would like to see what you are saying related to the car.

[@porta_patrols]

looks professionel!

[@noijelle623]

Do you think you can do a follow up video on pills, on like how the car reacts, what they do how the car responds those Kind of things And maybe some other topics that might need more detail like shock tower positions and A-arm points, camber link, Why would you have it on position 5 vs say position 2 and why you would want a longer link other than a short link while still having 1 or 2 degrees of camber. Another topic could be ball stud placing and spacing what are the hidden secrets within them Super awesome video, I definitely learned some new things I did not know an hour ago👍

[@RyanHarrisRC]

Maybe! But the best thing to do is just go out and try them yourself! Learning first hand is the best teacher

[@bradlee5277]

@@RyanHarrisRC I agree with you, but it would also be nice to know as a beginner what the general reaction of the car is going to be, before going in there willy nilly and burning up a motor or something, thats honestly my biggest fear haha

[@Saetun.]

nice console record player man. I have a 56 Magnavox myself!

[@TheRavens2321]

Great video!

[@bradlee5277]

Hello Ryan "styles" Harris, ive been lovin your videos! I was wondering if you would be able to do like a full 1-2 hour video, or break it up into a numerical series where you explain and show how to adjust all these parameters in order. and maybe like explain what most commonly happens to the vehicle after each thing is adjusted. I know it can very per vehicle but it would still be really helpful! Thats probably a lot to ask but youre the man! haha

[@UnicornBikes]

I'm fairly new to rc cars but have quite some experience with suspension setups on bikes and cars. The main thing I don't understand is why the shocks are so hard to tune. Both compression and rebound are locked to each other. I find that I'd like to get much more compression dampening, but have a fast rebound for the rough terrain driving that I do. Is there a way to get 2-way adjustability on shocks, or are they just too small for those complex valve systems?

[@adamcumpsty5356]

Ryan. A question about cup offsets on the bottom of shocks. What affect does say a 5mm cup over a 9mm?

[@lsrteg]

Very good video it thought me a lot.

[@RcEpic]

Great video man. Nice work

[@fitzieindoorsoutdoorsadventure]

Very great video

[@DrewPrce]

TLR setup sheets are so complicated and hard to decipher so annoying. Its crazy to me that a company like Tekno can come along and blow them completely out of the water as far as manuals and setup sheets go all that money that Horizon Hobby has and you think the would step it up but no.

[@markmccullough6873]

This is awsome ryan.Like i said before great info.How big a differants is it from indoor set up to outside set up?Have a wonderful day.Stay Safe Stay Healthy

[@nathw260]

Top video sir! Very helpful.

[@andrewdecavia7553]

First the resource for setups doesn't work. Second, anywhere we can see your set up sheets? Of all the spec sheets on the TLR site, 1 is 17.5 and same track conditions. And already variances from what i have. Bought a lot of what you recommended in videos for set up so figured ask before i go buying more gears, springs, etc. Running a 5.0 DC Elite with a Trinity 17.5 for stock spec.

[@MX-CO]

What weight shock oil would normally be recommended for a 2wd car on a clay high grip traxk. Thats pretty smooth?

[@jedovtqy4533]

Love your videos Ryan, Setup sheet, what's that, I'm always being told by fellow racers I need to set up my cars, i just stick them on the track and if it goes I'm happy, lol

[@67smit]

What do you thank is better 4wd buggy TLR 22x4 or team associated b74 1d or tekno what is the best one for the track on handling and as a kit to put together

[@RyanHarrisRC]

Whichever you can easily gets parts for and have support peeps at your local track! I'm obviously bias to the 22x4 being the best!

[@jonathanko4106]

interesting.... Radar fronts and stage 2 rears?

[@RyanHarrisRC]

Typo! Sorry about that

[@CoachD386]

👍🏾💯

[@zac.bolin01]

Is that a spyderco knife?

[@RyanHarrisRC]

Good eye sir! Its the Vallatton :D

[@shanealberico]

Hey Ryan I’m gonna be in Florida March 11-16 and I’ll at beachline that weekend and was wondering if you would maybe stop on by or race with me it will really cool for that to happen you don’t have to just asking because ngl it was really fun to race with you and I want a rematch.

[@damonsmith6626]

Hey so I was wondering why you put holes in the body on you 4WD

[@RyanHarrisRC]

Keep that 13.5 a bit cooler with some air flow

[@subwayracing]

Even now, i still cant read sheets 😅

[@RyanHarrisRC]

Do it again... but slowly 🤘

[@subwayracing]

@@RyanHarrisRC Ok, ill slow it down to .5 speed 😅

[@jacobsimpson6677]

Is the x 4 set up good for ocrc when it pins

[@RyanHarrisRC]

Use Tom's setup from the TLR page for OCRC. He has one specifically for that track!

[@shanealberico]

Holy crap I went and looked at how much that is and holly crap it’s expensive

[@02semiata]

What’s expensive?

[@shanealberico]

@@02semiata the box

[@02semiata]

@@shanealberico ah

[@mubashir78]

agree, complete rip off at 50 bucks for the things you get

[@scottharvey3173]

Great video, chassis setup took me an age before ever figuring out. Always something new to learn. On a side note for you or anyone that races outdoors. With these new skeletonize motors. How do they handle the loose dirt that can enter the motor. Will it accelerate the wear and tear on the motor?

[@raymondpavlick4460]

Hi Ryan I have been watching you for a long time now I'm 14 and have a Losi 1/10 scale buggy and I race Carpet with my dad who also has a losi and he said If I emailed you he would pay for your plane ticket from Flordia to Ohio where I live and wanted to know if you would be willing to fly down and race with us one weekend

[@MX-CO]

Yall must be rich

[@lcpeterbilt379]

rc box club doesnt exist.. its over, i went to subscribe.. it is not a thing