How To Rebuild A 125 Pit Bike Gear Box | Step By Step

In This Video I Show You How To Rebuild A 125 Pit Bike Gear Box | Step By Step.
Scott's Shed Im Just A Guy Who Likes Messing About With Motor Cycles
And Engines In My Spare Time.
Camara I Use Is a Gopro 7 White www.amazon.co.....
Subscribe Here www.youtube.co....
Please follow me for more channel updates
Instagram / scotts_shed​​. .
twitter / scottsshed​​
Email [e-mail]

[@mrbeast9818]

You helped me a lot that’ll you 💙🤛🏻

[@musiimentahillary5512]

Me also i like him so much 👏

[@xxoggamerxx8231]

you should make another video on how to take it out of the bike

[@ScottsShed]

There is on my channel

[@Dj-yy6oy]

My 3rd gear makes a ratling noise and doesn’t work what so ever would this sort it

[@ScottsShed]

You would have to strip it and look for broken part or ware

[@wadesoutdoors1914]

I have a 2017 ssr 125 . Tore it all the way down , checked gears . None are broken . Motor sounded good but won’t never go into any gear . I’m going to go ahead and replace all gaskets when putting it back together. I’m going to replace the small spring on the gear selector assembly. Do you have any other advice on what it could be ?

[@davidwillis5016]

Thanks for da video

[@alabinibop]

Hi, great video! I have a stomp 125, I believe the engine is the (YX 125) it is missing third gear. When selecting third, there is no drive and lots of rattling. The other gears are fine. Would someone as confident as yourself have any ideas as to cause and solution to this please? I'm aware the engine is going to have to be disassembled, just curious as to what I should find in there? Many thanks.

[@ScottsShed]

Did it just loose third gear or did it get worse until stopped selecting?

[@alabinibop]

@@ScottsShed hi, thanks for responding. I purchased the bike with the issue and with no indication of its development sadly..

[@ScottsShed]

@@alabinibop can u email me a picture of the engine ? my email address is in the about page

[@alabinibop]

@@ScottsShed yes, I'll send you one over. Thanks.

[@alabinibop]

@@ScottsShed hi, I have sent one via insta.👍

[@ryanrott5917]

Is this a dry or wet sump?

[@leenevin8451]

My 3rd gear rattles and jolts. No idea where to start. Cars are more my expertise

[@ScottsShed]

Possibly shift forks or a warn gear

[@leenevin8451]

@@ScottsShed so it might only be the selector? Could it be chipped tooth or worn bearing? Other gears are fine. Kinda feels like chain is gonna come off. It’s a 125 pit from China. Motomadness it’s called

[@ScottsShed]

@@leenevin8451 would t say bearing as it’s o my the one gear I think possibly worn gear or selector forks there’s a video on my channel of a complete tear down and rebuild if u get stuck hope you can sort it 👍

[@leenevin8451]

@@ScottsShed does the engine need pulling off frame? I’ve seen the gear/shaft rebuild. Is it difficult to put back in?

[@ScottsShed]

@@leenevin8451 yeah need to split the case to get to the gear box but can take clutch side off in the frame to check shift selector