How to rebuild the Ds bait pump part 2 (YELLOW MAIN WASHER)

This video is How to rebuild the Ds bait pump part two with the new yellow main washer. It's really simple to do but If you don't feel confident in rebuilding the pump yourself there is the option to send it back to Dave who will do this for you. Just send him a message and he will be happy to help. The suction on the ds bait pump is amazing, the quality of the pump is spot on and its smooth. I hope the video helps you out. Bellow is a list of tools needed for the job. Part one shows the full strip down when cutting the edge off the yellow main seal. Please be careful, you can use scissors, a knife, a Stanley blade like I do, or a grinding wheel. Use what you feel save using and please be careful.
If you find this video helpful please subscribe. The support will be amazing and really appreciated. Thank you Dave.
TOOLS
.31mm spanner or adjustable
.13 mm spanner
.13 mm thin wall socket
PART'S
.Yellow main washer 0.70p
.Grey washers 0.25p
.Metal flat washer 0.10p
/ dsbaitpumps
If you would wish to donate to the channel, you can do so through this link bellow. I don't expect anything from anyone, but I have a had a few messages asking if people can donate which is seriously generous and appreciated. Your an amazing army. Thank you for the support.
www.paypal.me/...
Subscribe link here if you would like to subscribe. The support would be great, and highly appreciated. Thank you Dave.
kzbin.info...
music by
Track: BH - Holding On [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • BH - Holding On | Melo...
Free Download / Stream: ncs.io/HOn
#Dsbaitpump #Dsbaitpumpyellowmainwasher #Baitpump

[@steveandpam1]

I put mine on a bolt and put in in a drill found you have better control when putting the shoulder on the washer

[@C3BFA]

Sounds like a good idea steve thank you for your comment

[@liammarklew2147]

I use them yellow washers and there are amazing for suction you should be impressed when you use it on the sand

[@C3BFA]

I can't wait to use it just waiting for the lockdown to end and I'm out with it

[@darrengriffin5369]

Just purchased one today. Told all set up and ready to go so will get it out this weekend for a go🤞 should i be opening it up and washing it out after each pumping session? And how often are we applying the fairy liquid while out pumping? Thanks

[@C3BFA]

That's great. Yes they are ready to pump. Tiny little squirt of real fairy liquid not the cheap stuff only uzr the green fairy. No need to strip it for cleaning use a bucket at home filled water clean water and cycle the pump in the bucket

[@stevebattle687]

Great bit if kit . When ordering does the new pumps come with the yellow washer as standard now ?

[@C3BFA]

They are great pumps Steve was out with mine a few days ago and had a good haul again. I believe you do get spares with the new pumps but you best bet is to message Ds bait pumps to check. If you message him via his Facebook group it's a bit cheaper than eBay

[@dsbaitpumps]

Thanks again David top video 📹👍

[@C3BFA]

No worries

[@jamieginge7371]

Another great video Dave deffo give it a go cheers

[@C3BFA]

Thank you Jamie it's good to hear let me know how you get on

[@jamieginge7371]

@@C3BFA just waiting for them to arrive hopefully be here by the weekend 👌🏻

[@C3BFA]

Sound good

[@lefty940]

Looks great im going to get a set for mine

[@C3BFA]

They do seem good lee i can't wait to go pumping with them

[@stevennetherton1219]

very informentive well done mate

[@C3BFA]

Thank you Steven

[@t.m.sfishing1324]

nice video mate,need to get them ordered, soon as possible, 👍

[@C3BFA]

Thank you Paul

[@gary-dn4uw]

Nice video again🎣👍

[@C3BFA]

Thank you Gary really appreciate your feedback

[@michelbreizh2522]

hello which is better in 22 or 28 thank you

[@C3BFA]

I have only used a 22 Michel so I can't advise sorry

[@StarfishSeaFishing]

Much better dave geate vid mate

[@C3BFA]

Thank you Paul

[@davidtilly2142]

Hi I am getting a few lug but I am getting more guts than lug . Am I doing something wrong

[@C3BFA]

Yes your going to deep try literally 2-4 inches if it's still happening keep the depth the same and start moving back from cast about 1/2 inch at a time I find around 3-4 inches away and 3-4 inches deep work well but each day is different

[@davidtilly2142]

Thanks for the reply I ordered a pump it's being posted on Monday. Great video and advice Thanks for the information and where to buy the pump. Thanks Dave Tilly.

[@C3BFA]

No worries Dave if you have any more issues just comment here will do my best to help

[@jon-yb9fr]

Just got one, yellow amazing more and more worms compared to the copper one I made 😁

[@C3BFA]

Well Done Jon these are amazing pumps I'm still on the yellow seal belive it or not

[@jon-yb9fr]

@@C3BFA totally agree, just got to get used to the weight prob with being a thicker shaft, mint well I think I will stick with them can't see how suction could get any better than it is, 😄

[@C3BFA]

@@jon-yb9fr they are built to last and it's good exercise 😂 I think it would pop The worms if there was much more suction it's powerful. I do have a Facebook group called UK sea fishing & Cardigan bay fishing adventures your welcome to post pictures on there of your worm hails or catch reports

[@jon-yb9fr]

@@C3BFA aww cheers thanx

[@C3BFA]

@@jon-yb9fr no worries

[@michaelwaugh4299]

Handle has come off , whats best for fixing back on

[@C3BFA]

Have you got the copper crush washer? If not you will need a new crush washer and refit it

[@michaelwaugh4299]

@C3BFA OK thanks

[@IrfanAnsari-ig4nf]

Hi Mate, I want to buy yellow main washer and grey washers… Where to buy them? Please let me know.. Thank You.

[@C3BFA]

He is on Facebook Irfan link below for you his name is Dave facebook.com/DSBaitpumps

[@IrfanAnsari-ig4nf]

@@C3BFA yes I have sent request to join fb page once approved I will message to Dave. Thank You for your help Mate.. Appreciate 👍🏾

[@C3BFA]

That's no worries think he is on holiday at the moment I seen something the other day online. He will get back to you as soon as he is available he is a really nice bloke and very helpful

[@C3BFA]

Also if your on Facebook I have a page Cardigan Bay fishing adventures your welcome to join

[@simonyoung908]

Why not put a bolt through the yellow washer, put it in a drill chuck then use sandpaper for and even edge .

[@C3BFA]

Yes you could do that it don't matter how you do it everyone will have there own preferred tool or way of doing it

[@santiagopalangre1184]

Buenas tardes amigo me llamo santiago y

[@C3BFA]

I only speak English sorry Santiago. But thanks for commenting my name is Dave hope you enjoy the videos

[@santiagopalangre1184]

Como puedo contactar contigo en privado

[@C3BFA]

Sorry I missed this. I have email [e-mail] Also Instagram and Facebook