How To Reconnect HP 6400 Series printer To New WiFi ?

This video reviews the step-by-step method to reconnect your HP Envy 6400 Series All-in-one Printer to a new Wifi network.
Welcome To My Channel - Printer Guruji
/ printerguruji

[@just4mead]

Thank you that was so clear and easy. The directions printed from HP stated information button on rear but it’s on the front and the reset/wifi button is so small I didn’t even know it was there.

[@PrinterGuruji]

You're welcome!

[@oshanecoley223]

This the fifth video I’ve watched and your the only one who could help me out , thank you so much. Every other video did the set up from opening the box and not showing how to reconnect Wi-Fi backup , so thank youuuu again!

[@karenbouchardbilton825]

I hate the "opening the box" videos, we all know how to open a box fer pete's sake, it's what's IN the box that is the problem .....

[@alexanders88]

You are a life (& printer) saver!!! Your 2 1/2 minute video is worth 100x more than HP pitful excuse for documentation. Many thanks!! Even that is not enough.

[@GVAPAPUCI]

Joo por fin . Muchas gracias me has salvado

[@PrinterGuruji]

Welcome

[@ap2760]

6458 Warning - Danger - Danger!!!! Worst printer ever don't buy!!! Never EVER works without unpluging and plugging back in - Goes through ink cartridges after about 20 pages Cannot copy multiple pages of anything. Gets paper jams all the time. Plus you have to set up an account to be able to scan or print... So HP Can see what you are copying or printing. I have had cheap printers before but at least they worked for a while.

[@margaretmcconnell3069]

THANK YOU! On mine the wifi light was blinking after we switched providers. I got the light to go off but the printer still couldn't be found. Unplugging it and plugging it back in was what finally allowed the hp smart app to find my printer.

[@jillianpillsbury3797]

My 6458e printer will not recognize wifi password and it is correct!!! I've tried EVERYTHING!! I need to reset it. These are not instructions to reset it.

[@seekingtruth1110]

What if I've just changed my router? How do I get my HP connected to the new router?

[@macristo33]

You saved my week! You saved me hours of frustration and confusion! Your video worked for me! Thank you soooooo much!!!!!! : ) : )

[@PrinterGuruji]

Thanks

[@lindaconaway2279]

This video worked so much easier than the written instructions. Once I watched just 1/2 of this, I had my system setup!!! Thank you so much.

[@PrinterGuruji]

Glad it helped!

[@1dagoods]

What else do you do & know? AWESOME!!!

[@jillianpillsbury3797]

I stand corrected! Pushing the little button finally worked for getting new WiFi password registered to my already setup printer. I've spent HOURS trying to do this! Wish I found your video first! Thank You!!!

[@miken9065]

Excellent info. Thank you!!!

[@nipiotrowski]

You are awesome. Solved my issue I'd be trying to resolve for an hour in 2:25.

[@gailita5451]

Every time i try to connect to the wifi..it disconnects it. What do you think causes this?

[@PrinterGuruji]

Hi, its not normal. It can be low wifi signal. Move printer near router and do wifi setup. It should fix it.

[@jdwacht]

Thank you so much! After watching your video for 2 minutes I was able to reconnect to a new wifi after looking around HP support for an hour. Thank you, thank you, thank you!!

[@PrinterGuruji]

Glad I could help!

[@sambiscits6711]

I'm having trouble getting my HP ENVY 6000e connected wirelessly it keeps coming up asking for a WSP PIN number, and I'm not able to find that.

[@judycolson6047]

Everything went perfect up to the part after I pressed the button on the printer to finish set up. It says "processing" and it stays there and doesn't seem to get past that. I'm attempting to set up my printer with my new StarLink satellite provider. So I went back and restarted the whole thing. During the phase "processing", I get a screen pop up that says We're sorry, something went wrong, having technical issue with your set-up session, can't finish set-up right now, try again later to resolve this issue. If you continue to have issues contact HP Support. So instead of retrying it again, I tested it to print, and lo and behold, it prints! So I think it connected somewhere and I didn't need the screen to show me it did. Happy camper! Thanks for your invaluable info. I totally forgot about that reset button on the back of the printer.

[@meganmusson8168]

Thank you. That made things so much easier

[@PrinterGuruji]

You're welcome!

[@LataushaTheAuthor]

Idk why mine not connecting after 5 tries. Keeps telling me to try later. What a headache. It will connect to my phone but not my laptop.

[@prachiharley]

Thanks so much for help. This printer is so obselete and frustrating. Even HPs support groups are riddiculous.

[@martinlehrke8087]

Let’s start from the beginning, printer has Wi-Fi but will not show up on my phones or computers? Need help

[@galeendersby4612]

You saved me after hours of trying! Did not know about the little Wi-Fi reset button on the back… do now, thank you

[@fredo9900]

Thank you! Direct, simple, concise instructions! The world (and KZbin) needs more of this.

[@PrinterGuruji]

Glad it helped!

[@kenwilson393]

THANK YOU! printing back in business.

[@kkaterina12]

Thank you.

[@PrinterGuruji]

You're welcome!

[@rawkdiamondz]

So happy I found this tonight. I was just about to throw in the towel! Extremely helpful, thank you!

[@klyingling2008]

YOU ARE THE BOMB!!!! I struggled for hours - found your video and VIOLA! Thank you!

[@hans-peterliedtke6417]

Thanks, dear. That's what I was looking for. have a good time

[@marybernadette1929]

Thank you you explained so well and it was so easy. I appreciate your help great video

[@suzeltaber-shaw8080]

Thank you! Saved me hours of hunting for the little button!

[@eileenjamison1242]

Thank u for showing and explaining how to reconnect

[@mikamika4207]

What if all the lights are still flashing on the printer but it says the factory reset has been restored

[@kimberlyhernandez4578]

this was the only video i needed!!

[@stars-and-stones]

Thank you! Printer is reconnect again! After a few tries, a sleep, a dustfree environment, an open mindset and a good cup of coffee. Connection was broken for the first time after shot down the internet button (it was so hot…). After to start up, I saw the problem. In the printer shop they told me it’s better to let the printer be stand-by all the time. What’s your opinion? Maybe the blue light disturb my cats to sleep deeply… - Thank you to make this video! 🌷

[@phydauex]

Why didn't I think of that. Oh wait I did. 4 hours later still no complete setup. By far the worst print set up software ever. I did all the steps you outlined except it never completes setup. Beyond frustrating. Along with no support from HP. It's virtually new, was setup for a while. Cannot get it to setup again. Suggestions?

[@kericek]

Díky!

[@jonathanhimmelroos5882]

I am searhing everywhere. I have installed a new WIFI but this is not what`s happening for me. My WIFI light button is still flashing continuously and the printer is beeping when i hold the back button for 3 seconds (When this happens my WIFI light button is flashing faster for maybe 2 seconds). The light from the printer is not purple, it`s light blue? Is there any problem with my printer?

[@syl6728]

Thank you so much. You are the best👍💯

[@dbeebe9535]

Thank you.

[@maureen8624]

THANK YOU SOOOOOOO MUCH! BETTER THAN CUSTOMER SERVICE!!!

[@francescagolay759]

You superstar! Thank you so much. I don't know your name, but you have saved me SO much hassle. Thank you, thank you and a thousand more thank you's!

[@DonTeale]

Brilliant, having googled extensively this 2 minute video showed me exactly what to do - Thanks😄

[@PrinterGuruji]

Glad it helped!

[@KimNguyen-pm7fx]

Thanks for your help

[@hollymckenna3193]

This video was super helpful! I followed the instructions exactly and it worked!

[@raquelwoolaver2174]

Thank you - I couldn't find how to fix this anywhere else. My instructions were printing in another language and it was all very frustrating. You solved this easier for me than the HP site.

[@lindamcdermott9980]

Thank you, thank you, thank you! I have been struggling with getting my printer to work for quite some time. Your recommendations solved the problem!

[@ChronicSurfer]

Thank you so much! I went to KZbin after watching this video from Google just to throw you a like. Cured my frustration.

[@Lanchana11]

Multiple searches, virtual assistants, 5 youtube videos and a tonne of frustration...hours later THIS video worked thank you!!

[@benthompson8450]

short and to the point thanks

[@lizbethfuentes2163]

MIL GRACIAS! TANTOS VIDEOS Y EL TUYO SUPER BIEN EXPLICADO. TODO SALIO BIEN CON MI IMPRESORA

[@CarmemSouzaUSA2011]

Thank yo uso much

[@hv97]

THANK YOU!

[@fanchonjackson8515]

It won’t connect once i click yes button

[@kendalhumes]

Thank you.

[@PrinterGuruji]

Welcome!

[@lorraineblackman1926]

Good! You talked a little fast - kept pausing video between each step - but it worked. Thanks!

[@LindseyBieligkLindseyBieligkRD]

Thank you, you saved me from having to throw this HP out the window.

[@keren874]

Thank you sooo muchh

[@LCLippe777]

Very helpful. Much gratitude!

[@PrinterGuruji]

Glad it was helpful!

[@jmlmjr27]

Thank you... it worked !!!

[@deiseribeiro8970]

😊

[@LeonardDeangelo]

Thanks a million.

[@Hossainq11]

Thank U bro your video help me to connect printer fastly

[@sweetlikeme]

I'm tired i will never buy hp again

[@TheOrignalCarpe]

Worked perfectly Thank you

[@ultimatek9383]

This is the one. The real one, the RIGHT one

[@LUCIFER_YAY-ducks]

THANK YOU!!!

[@PrinterGuruji]

You're welcome!

[@mariasnav8810]

thank you very much!!! 😉

[@petop8669]

Gracias me ayudo tu video :)

[@priyae4069]

Savior! Thank you.

[@cynthiahurtado6298]

What if you don’t have wifi?

[@PrinterGuruji]

Use inbuilt wiFi

[@skalam2123]

Can i use my own phone wifi

[@PrinterGuruji]

No it will not work with that.

[@skalam2123]

@@PrinterGuruji oh ok thank you

[@skalam2123]

@@PrinterGuruji okay thank you:)

[@princeofcupspoc9073]

Yep. Everyone knows that. NOW, how about discussing all the things that can go wrong. No... That would be actually useful. Can't have that.