How To Record VOCALS With The APOLLO TWIN + UAD

[@GabrielXDrums]

Recording vocals is a whole art in itself, I love it.

[@homestudioacademy]

@@GabrielXDrums for sure! 👍

[@sonexcellencea]

I can finaly use my Apollo the right way. Thank you for the great video

[@homestudioacademy]

You’re very welcome! Glad to help 😊

[@djcook]

awesome vid helped me

[@homestudioacademy]

Glad to help! 😊

[@xxirion]

Fantastic details, will really help with getting the feel and warmth from the additional plugins! Thank you so much for your updates and content!!

[@homestudioacademy]

You’re very welcome! Glad you found value in the content 😊

[@SoundsInMyMind]

I will give this a try. Thanks so much for your tutorial

[@homestudioacademy]

@@SoundsInMyMind you’re very welcome! Glad to help 😊

[@BrianJurkowski]

GREAT video! Thank you for sharing this. I'm picking up my first Apollo Twin in the next couple weeks and look forward to trying this out on my vocals!

[@homestudioacademy]

@@BrianJurkowski you’re very welcome! Glad to help 😊 congrats!

[@junefiasco]

Dude, your channel ROCKS! Thank you! Your video is so detailed and easy to understand.

[@homestudioacademy]

@@junefiasco thank you so much for the kind words! 😊 I’m glad you’re finding my content helpful. Believe it or not, this is an old video and now my video / audio has vastly improved.

[@dedessuslesmoustierjacques3459]

Best tutorials on how to use hardware/software.I don't own any Apollo interface but, i can apply your advices with my configuration.Great job.

[@homestudioacademy]

Thank you so much for leaving a comment and for your support! I’m happy to know you found value in my content 😊 Make sure to check out the channel for more tutorials.

[@mynameisfavor]

VERY Helpful, very insightful! Suggestions were concise and I implemented them immediately. Thank you!

[@homestudioacademy]

@@mynameisfavor glad you found the tutorial helpful 😊

[@rioslatino552]

Bro this is so well explained! Kudos to you! Btw you have a new subscriber

[@homestudioacademy]

Glad to help! 😊 THANK YOU for your support🙏

[@PatrickS34751]

You have the most useful audio content that I have seen on KZbin. Thank you!

[@homestudioacademy]

@@PatrickS34751 thank you so much! That means a lot 😊

[@sonexcellencea]

Automatically subscribed Thank you

[@homestudioacademy]

Thank you so much! 😊

[@zettepix2009]

Thanks for this crystal clear step by step tutorial

[@homestudioacademy]

You’re very welcome, glad to help! For more tutorials like this, make sure to subscribe and check out the channel 😊

[@ANAAMALY]

Good one. Thank you.

[@homestudioacademy]

@@ANAAMALY you’re very welcome! Glad to help 😊

[@Doraemon933]

I have seen a lot of teaching methods of sound engineers, but they are all talking big words, which do not help me. Recently, I tried your teaching method, so that I can record a good voice. Really needs a lot of teaching from a good sound engineer like you have no secrets, thank you

[@homestudioacademy]

Thank you so much! I’m glad the video helped you 😊

[@lindsayh1163]

Really helpful thanks, Question:when I record like this with UAD MON selected although the compressors are not being recorded, is the UA 610 pre amp effect being recorded?

[@homestudioacademy]

You’re very welcome! Thanks for leaving a comment. When UAD MOD is selected, it bypasses all of the effects including the preamp. So it will just record the build in preamp of the Apollo.

[@lindsayh1163]

the build? so the effect of boosting the voice through the unison preamp does come through in the recording? but not the other plug ins?@@homestudioacademy

[@homestudioacademy]

@@lindsayh1163 no the Unison 610B Preamp won’t be printed if you use UAD MON mode. It will be like using the Apollo on its own without any of the effects.

[@guillemguinovartsanahuja8923]

Hi, I was checking that same question on te Software manual of the Apollo twin. It says that the Unison processing always will be recorded on DAW, even if the monitor mode is active. I checked that using a Marshall emulation on my Unison preamp with mon mode, and the guitar signal it's been recorded with marshall distortion.

[@homestudioacademy]

@@guillemguinovartsanahuja8923 thanks for sharing! According to Universal Audios official video: kzbin.info/www/bejne/g3-9pX5tqrSphMksi=b16dlKLETYT6J1-w (At the 3 : 59 time stamp) “Signal sent to your DAW is Post-Unison, Pre Fader and Mute”. This means if you put the Preamp in the Unison section, even at MON mode it will print. However, if you put it in the “inserts” section (like where you would insert Amps, compressors, eq etc…) and select MON mode, it won’t get printed.

[@318Leco]

This is great detail you have my subscription!

[@homestudioacademy]

Thank you so much for your support! 🙏😊

[@BillyReekie]

So I set that vocal chain up, record it into logic, do I then start eq’ing and adding compression again in logic or do I just carve out the unwanted frequencies in logic once I’ve printed that vocal chain? I watched your other video explaining equalisation but I’m trying to figure out the process for doing it all start to finish

[@homestudioacademy]

Great question! If you record with Apollo Console App using the REC mode (meaning the plugins were recorded), then I would just use a Deesser and EQ to take out the harsh frequencies and then add delay and reverb at the end of the chain. However, I choose to record using the UAD MON Mode in the console app which means the plugins don’t get printed. This way I can make changes after the fact in Logic Pro. In which case, my chain would look something like this: 610B Preamp DeEsser Subtractive EQ 1176 Compressor LA2A Compressor Pultec EQ Delay (if applicable) Reverb But of course, nothing is set in stone and there is no “right” way to do it. Find the workflow that sounds good to you. This is just what has worked for me. Hope that helps you! 😊

[@BillyReekie]

@@homestudioacademy Awesome bro, thank you for your response, can’t wait to try this :)

[@homestudioacademy]

@@BillyReekie you’re very welcome! Thanks for taking the time to leave an insightful comment. Glad to help 😊

[@beachfires7622]

This was incredibly helpful and easy to understand . Thank you so much!

[@homestudioacademy]

I’m so glad you found the tutorial helpful! Thanks for leaving a comment 😊

[@starletmusicvideo]

Gold. Thank you very much

[@homestudioacademy]

Thank you for the kind words! Glad to help 😊

[@Monte90]

Great viedo man. Saved me big time!!!

[@homestudioacademy]

Thank you so much, glad to help! Make sure to check out the channel for other similar tutorials 😊

[@xntricity6446]

Thanks for the excellent video, saving to my favourites so can follow this when setting up.

[@homestudioacademy]

Thank you for leaving a comment! Glad you found it helpful 😊

[@xntricity6446]

​@@homestudioacademycan I ask a question if you don't mind. I plan to route an external audio device into the Apollo via adat, would I be able to apply the built in fx to the incoming adat channels I wonder? Thanking you

[@homestudioacademy]

@@xntricity6446 I haven’t yet tried to expand the number of channels with adat but here is a video I found that you may find helpful and answer your question: kzbin.info/www/bejne/p6fan5SefqqeatE

[@xntricity6446]

@@homestudioacademy thanks a mill, your a star ❤️

[@homestudioacademy]

@@xntricity6446 you’re welcome!

[@turkmusik]

This is great! Thank you so much. Finally a clear and detailed tutorial that moves fast and doesn't use tech talk. Unfortunately, although the track sounded great running through Console, it didn't print on the Logic recording and I do not see why not.

[@homestudioacademy]

You’re very welcome! I’m glad to help 😊 if the track didn’t print it’s because you probably have the console app on UAD MON mode which means you can hear the plugins but they won’t print. You need to select UAD REC mode on the Console App on the far right side.

[@turkmusik]

@@homestudioacademy Thanks, but apparently the problem just needed to be solved by updating and restarting, etc. Works now.

[@homestudioacademy]

@@turkmusik great to hear that the issue has been solved! 😊

[@djfingersflores]

Great info! Keep rockin' steady

[@homestudioacademy]

@@djfingersflores glad you found my content helpful 😊 thanks for the support!

[@canola124]

"Hello, when recording in a DAW, should these plugins be applied during the recording process, or should I record without plugins and add them later in the DAW? And does it affect the mixing and mastering process?"

[@homestudioacademy]

@@canola124 you can choose. If you use the plugins in the UAD console app and select REC the effects will print to your track in your DAW. If you select MON mode in the console app, you’ll hear the effects but they won’t print to your track in your DAW and you will have to add them later.

[@canola124]

@@homestudioacademy Thank you very much for the prompt response. I greatly appreciate it.

[@homestudioacademy]

@ glad to help! 😊

[@Joncartervoiceovers]

Very nice job with this video. Great, detailed info that was very helpful. Thanks!

[@homestudioacademy]

Thank you so much 😊 glad you found it helpful! Make sure to check out the channel for more tutorials.

[@future_Victoryofficial]

Clean 🔥

[@homestudioacademy]

Thank you 😊

[@kourouma1661]

Such a great work !!! Merci beaucoup

[@homestudioacademy]

Thank you, glad to help!

[@SamGovin]

Real good video buddy, got me started

[@homestudioacademy]

Thank you for leaving a comment! I’m glad you found the video helpful 😊

[@zyanigh1]

Hi. Thanks for such a wonderful video. I have an Apollo twin x quad but I also have a Rupert neve mic preamp. Does this video apply to me? I’ve been trying to find a way how to get the best sound quality out of my setup.

[@homestudioacademy]

You’re very welcome, glad to help! 😊 yes it applies. If you want to use your Rupert neve preamp, then just don’t use the 610B emulation as shown in the tutorial. The rest of the vocal chain would stay the same.

[@zyanigh1]

@@homestudioacademy thank you

[@homestudioacademy]

@@zyanigh1 you’re very welcome 😊

[@meenz4631]

Great video! Is there a reason why I can't move the input volume for my mic by just a little? Its orange and increases by 5dbs

[@homestudioacademy]

Thank you so much! If you’re using the 610B preamp then the Apollo will act like the real unit and will only allow you to change the meters like the actual hardware.

[@meenz4631]

I got it!I see what I missed! lol

[@joelmazzi463]

thank you for this video, should i check the meter Db level of the mic with only unison preamp or also with the LA2A and 1176 compressors?

[@homestudioacademy]

You’re very welcome, glad to help! You set the gain with your preamp. But once your entire chain is complete, make sure it’s still between -20db to -10db so you have enough headroom and prevent it from clipping.

[@trackaddicts9970]

Are those UA plugins compressors pre installed in to the Apollo software?

[@homestudioacademy]

@@trackaddicts9970 you have to create an account with Universal Audio and register your Apollo. Then download console app and the licenses for the included plugins and you’ll be able to use them.

[@trackaddicts9970]

Awesome! Thanks for the help. Subscribed^^ 🎉

[@trackaddicts9970]

Also @homestudioacademy does the interface have a built in Microphone for the talkback feature? In other words, if I have an artist recording vocals in an isolated room can I push the talkback button to communicate with them?

[@homestudioacademy]

@ glad to help! Thank you for your support 🙏

[@homestudioacademy]

@ yes it has a built in talkback feature

[@spottedliver]

Fantastic information. Thank you.

[@homestudioacademy]

You’re very welcome! Glad to help 😊

[@Zak_Edington]

Bro how do you only have 10.7k subscribers.. literally any subject I type in, I scroll a little bit until I see your ass 😂😂 THANK YOU! 🙏🏻🙏🏻

[@homestudioacademy]

@@Zak_Edington 🤣 it’s been 2.5 years to get to 10K subs. I’m glad the videos are being helpful though, that is the whole point of the channel 😊

[@VibeMusicRo]

It is possible to stop monitoring from Apollo Twin X and monitoring from Pro Tools, to be able to use Auto-Tune form Antares not from UA? If Yes, can u tell me how, please?

[@homestudioacademy]

I don’t think so. To use the UAD plugins in real time with zero latency, you’ll need to use the UAD Console App.

[@onizuka9]

hi, I wonder the same thing, have you found since then? have you found since then? How to integrate the auto tune antares into the voice channel?

[@VibeMusicRo]

@@onizuka9 yes! After u open 48 and u put your Preamp just press mute in console and press R in Pro Tools

[@VibeMusicRo]

@@onizuka9 yes! After u open 48v (open the mic) and u put your Preamp just press mute in console and press R in Pro Tools

[@onizuka9]

@@VibeMusicRo Yes but if you want to use the same vocal chain as on the video for example? If I mute we will no longer hear these effects there but just the preamp

[@awesomeimpressions]

Thank You for your great video. I need easy and you seem very helpful. Sadly, I'm old school & 'finally trying to jump into the box. I bought an USB Apollo Twin but never used a plug in. For now, I just need a basic hook up with my Rane Pre/EQ, compressor & mixer. I'd really appreciate your advice on a the hook up (listed below), so I can use my Apollo & external gear together for now? For Example: Until I get into the console & plugins ... 1. Can't I just go from my external Rane pre to my ext compressor and then into Apollo's front Hi Z Input and still get a good signal and, just plug my L & R mixer outputs right into the 2 TRS inputs in the rear of the Apollo? And, until I get my rack mount dell computer set up (with quicker USB inputs made just for the Apollo USB Twin) ... 2. Can't I at least get an audio signal from the Apollo's L & R Outputs and plug them right into my current desktop computer? BTW, Do you know if the Apollo TRS inputs & front High Z inputs 'bypass the Apollo's mic pre? Some say yes, others say now. Thank You for your time & what you think? And also for your great video. I'm sure it's going to help me finally get this thing turned on! ha!

[@homestudioacademy]

Thank you for the kind words! I'm glad you found the tutorial helpful 😊 Once you download the Console App from Universal Audio's official website and get familiar with it, I think you'll be recording completely in the box more often. But to answer your questions: 1. Here is a youtube video from another creator who shows how to connect external gear such as an external preamp and a compressor to the Apollo: kzbin.info/www/bejne/hGq1p6J9fraIhrM Also, here is direct link to Universal Audio's official website explaining in more detail how to use Inserts on the Apollo: help.uaudio.com/hc/en-us/articles/206780533-Using-Hardware-Inserts-with-Apollo-Twin 2. I don't think you can bypass the Apollo built in preamps using the High Z input on the front or the TRS cables on the back. You can however bypass the Universal Audio plugins by selecting the UAD MON mode. Just keep in mind, if you add a UAD plugin on the preamp section (Such as the 610B preamp) then it will still get printed. Hope it helps! 😊

[@awesomeimpressions]

'Thank You' for your quick reply! I will look into this! @@homestudioacademy

[@homestudioacademy]

@@awesomeimpressions you’re very welcome! Glad to help 😊

[@Mytradewin]

Hey ,can I use auto tune wile recording and then get clean vocal in my daw ?

[@homestudioacademy]

@@Mytradewin yes you can use autotune when recording. If you want the effect to print, then choose UAD REC, if you just want to hear the effect but not print then choose UAD MON in the UAD console app.

[@Mytradewin]

@@homestudioacademy thanks for the answer…I am choosing between Apollo twin x and apogee symphony …for good quality vocals,and what I understand apogee has cleaner sound and better ad-da but Apollo plugins it’s another level…can u please help with this one cause I am struggling what to choice 🙏

[@homestudioacademy]

@@Mytradewin I’ve never used the Apogee so I can’t speak on it. I love UAD plugins and used them for about a decade now. My suggestion is to watch comparison videos so you can decided what’s better for your workflow.

[@Mytradewin]

@@homestudioacademy than u for u response!i am pc user and I understand that even in duo usb edition gone be some issues while recording..so I am going to grab symphony by apogee and work maybe with uad plugins native…hope it’s gone work fine…I don’t have any analog gear but I have tlm 103 and u87 ai and I wanted to level up my sound with some analog and studio quality sound..again thanks for ur helping!

[@homestudioacademy]

@@Mytradewin glad to help 😊 I do not recommend the Apollo for PC users because I also read that there are compatibility issues. Just happy you found what works for your setup. Also, congrats on both the 103 and U87, awesome mics! I hope someday I get the chance to try them out.

[@SlowOfficial]

Great Video! Slowly getting more used to UAD plug ins! Do you always use the same pre-amp settings when recording vocals? You don’t mess with all the other knobs on there? Thanks!

[@homestudioacademy]

Thank you so much! When it comes to the 610B preamp, I don’t mess with any of the EQ at all. I just use the tubes cranked up all the way to get some tube saturation because I don’t own a tube microphone.

[@thesongiseverything]

This video is great, I’ll definitely check out your other ones! Question: Are there any advantages to printing a small amount compression and/or EQ on the front end? Why is this function available? Does it have something to do with serial compression?

[@homestudioacademy]

@@thesongiseverything the advantage of printing effects is that it reduces post production. However, the con is that you won’t be able to remove them and if you over compress or add too much EQ there is nothing you’ll be able to do after.

[@meme-lx6cs]

what’s the best apollo twin version that looks like that one you have?

[@homestudioacademy]

@@meme-lx6cs the latest version is the Apollo Twin X. That’s the one I’ve used in this video.

[@JusJalin]

amazing video!

[@homestudioacademy]

@@JusJalin thank you! 😊 glad you got value out of the tutorial

[@3DRAP]

you are so amazinggggggg

[@homestudioacademy]

@@3DRAP hope the video was helpful 😊

[@TaeglicheNarzisst]

Great content!

[@homestudioacademy]

@@TaeglicheNarzisst thank you so much! 🙏😊

[@jordankahn9298]

How would you dial in settings for a female vocalist that will sing very soft and pretty, but then belt like Christina Aguilera? Follow up question: Would you gain stage based on the belting, and risk the soft vocal being too quiet? Or would you do the soft/belting vocals in separate takes and gain stage individually? (Also, what if the same sentence requires both techniques?) Much appreciated!

[@homestudioacademy]

@@jordankahn9298 the principles would be the same for dialing any vocal but of course use your best judgement for the singer and track your working on. When gain staging I prefer to set the gain based on each section of a song (example: set the gain for the verses, then the chorus then the bridge) and make sure the level meters are peaking at -12db. I explain more in depth in this video: kzbin.info/www/bejne/gmiuip2Hd657Y9k I hope this helps! 😊

[@jordankahn9298]

@@homestudioacademy Thank you so much, much appreciated!

[@homestudioacademy]

@@jordankahn9298 you’re very welcome, glad I could help 😊

[@SeanValy]

does the preamp get recorded into the daw? anyone???

[@homestudioacademy]

If you use the Console App and select the “REC Mode” then whatever preamp you have in your vocal chain (such as the 610B) will be printed to your DAW. If you use the MON Mode in the console app, then no plugins will print to your DAW and the Apollo’s built in preamp is what will be printed.

[@TRP1221]

you're the goat

[@homestudioacademy]

Thank you for the support, You’re very kind 🙏

[@Lower_off]

Hi ! I'm on fl studio and as you say when I start an old project, I constantly hear a loop, but I can't stop it how to do?

[@homestudioacademy]

Make sure your audio track is MUTED in FL Studio and that you are only monitoring through the UAD Console App.

[@sboy1955]

Good overview, thanks! So with the Apollo you don’t insert the UA plugins via Logic channel strip - rather you insert the UA plugins via Console, then just hit record in Logic? That seems like an extra layer.

[@homestudioacademy]

Thank you! The benefit of recording with the console app is the ability to run the plugins in real time with zero latency without straining your computer. You can add the plugins in Logic if you want but you won’t get zero latency.

[@sboy1955]

@@homestudioacademy - I have an Apollo on order and wanted to get an idea of what to expect. So basically I just need to think of the console as outboard gear, like my Helix. I got it 👍🏽

[@homestudioacademy]

@@sboy1955 yes and then you can choose to either just hear them (MON mode) or actually print them (REC mode). Then go into your DAW add other plugins or make changes. 😊

[@sboy1955]

@@homestudioacademy Thanks 🤙🏽

[@homestudioacademy]

@@sboy1955 glad to help! 😊

[@jamesbastani4295]

If I want to use the UAD plugins to process the recording afterwards, should I insert the same plugins again in my DAW’s track? If I insert UAD plugins in Logic Pro, will the processing take place in the Apollo? I haven’t found any videos that explain this process.

[@homestudioacademy]

@@jamesbastani4295 yes, if you want to mix your tracks afterwards and not record with effects, you will just need to add the plugins in Logic Pro.

[@SUPERRIO80017]

Why would you mute the track on logic you wont be able to hear the plugins recording

[@homestudioacademy]

If you forget to mute in Logic Pro, the computer will pick up on the signal from the console app and in Logic Pro creating a doubling effect.

[@SUPERRIO80017]

@@homestudioacademy so basically you cant here yourself on logic until after the recording

[@SUPERRIO80017]

What if you wanna hear your plugins while recording only can through the console

[@homestudioacademy]

@@SUPERRIO80017 you can, but then I would mute the track in the Console App. In my opinion, it’s better to hear yourself through the console app because you’ll be able to hear the plugins in real time with zero latency without relying on your computer’s processing power.

[@homestudioacademy]

@@SUPERRIO80017 with zero latency yes. Logic Pro will require you to bring down the buffer size in the audio settings and won’t be able to run many plugins when tracking.

[@j.morproductions3371]

Thanks for the info bro!

[@homestudioacademy]

Thank YOU for leaving a comment! Glad to help 😊

[@GoodxJ]

✌🏼

[@storeroom1503]

Damn. I’m a newbie here. So the Apollo basically does all the efx maybe except for some like auto tune etc. So do you do anything in the Daw you using, like do you put effects again from your Logic Pro, Pro tools etc? Or everything has been done already by Apollo audio interface?

[@homestudioacademy]

@@storeroom1503 you can print with the effects going into the recording. However, I prefer to just use the preamp and a bit of compressor to record and then add the rest of my vocal chain in Logic Pro.

[@storeroom1503]

@ Ok. I see. Sounds nice. So it’s only minimal work in the DAW. Just ordered my Apollo would definitely try that out. Can’t wait. Thanks

[@homestudioacademy]

@ awesome! Congrats on your new setup

[@storeroom1503]

@ thank you 😊

[@kalvillo]

Great vid bro, still I have one question Can U Write some plugs in and just hear some at the same time? Because I Write in the compressors and preamp But want to use reverb without writing in

[@homestudioacademy]

Thank you! Yes you can. Put the reverb on the right side of the console app like I showed in the video and it won’t print.

[@kalvillo]

@@homestudioacademy u the man bro thanks

[@homestudioacademy]

@@kalvillo you’re very welcome! Also, if you have any other questions the uad official website has guides on how to fully operate the console app.

[@estefanwall2094]

Do you need an external preamp with the Apollo? Thanks

[@homestudioacademy]

No, it has a built in preamp just like any other audio interface. However, the Apollo comes with awesome sounding UAD plugins that emulate classic preamps such as: 610B, Neve, SSL, Manley, etc..

[@estefanwall2094]

@@homestudioacademythank you replying, I understand about the emulations but is there enough gain to support most vocal microphones? Do those emulations also provide a gain boost/low noise floor ratio?

[@homestudioacademy]

@@estefanwall2094 I believe you are probably referring to the SM7B, correct? In which case, yes the Apollo does have enough gain to power it. Plugins don’t have any effect on powering mics. Hope it helps! 😊

[@tomashcroft7024]

What about setting headphone sound? I can barely hear myself using the DT 770 250 ohms?

[@homestudioacademy]

@@tomashcroft7024 that’s because 250ohms are considered high impedance which take a lot of power to drive the headphones. For that reason I use and recommend the DT770 pros 80ohms version which are Lower impedance and can be driven even by entry level interfaces.

[@tomashcroft7024]

@@homestudioacademy That's weird, the manual says the Output is 300 Ohms. I have a ticket in with support to get to the bottom of this. I also ordered some 80 Ohms to try. Thanks for the reply!

[@homestudioacademy]

@ glad to help

[@-ky]

Can i save these presets in my logic instead of using the console app?

[@homestudioacademy]

@@-ky you can only save the the console app in itself. However, you can save your session in LOGIC pro and save it as a template.

[@-ky]

@ sorry I’m confused by this response 🤣

[@-ky]

@@homestudioacademy what you’re saying is I could save this as a template and still use it in logic, right?

[@-ky]

Every time I record, with the same settings you mentioned in this video

[@homestudioacademy]

@ I’m saying that what you save on the Console app can only stay saved on the console app. For the settings to be saved in Logic Pro, you’ll have to manually add all the effects to your audio track in Logic Pro and then save your entire session as a template.

[@A.CAL96]

Can I use my own plug ins and add plugins to my channel strip on Logic Pro x

[@homestudioacademy]

@@A.CAL96 the universal console app only works with universal audio plugins but in Logic Pro you can add any plugin you want

[@LanoMusic]

If you use uad mon to record, will the 610-B on the vocal chain?

[@homestudioacademy]

If you use the 610B as unison (on the preamp section) it will print even if in MON mode. If you use it in the effects section (where you add eq, compressor etc) then it won’t print in MON mode.

[@mistik805mg]

Can Apollo twin usb handle the Dt770 ohm

[@homestudioacademy]

Yes I have the DT770 Pros and they are capable of powering them without any issues. 😊

[@PoppaReaux]

If I use this chain with autotune, is it best to add the autotune plugin at the end of the chain?

[@homestudioacademy]

Typically, I would use it after eq and compression but nothing is set in stone. Try both and see what sounds best to you.

[@MusicChannel-rf5zz]

Great video. You are suggesting a preamp plugin in the channel strip while recording. However I understand that the interface has built in preamps. So won’t that be sufficient to act as preamps? I usually use preamp plugins after recording vocal. Is that not good enough?

[@homestudioacademy]

@@MusicChannel-rf5zz when placing another preamp on the unison slot inside the console app, the Apollo will change from its own built in preamp to emulate whatever preamp you select, in this case I used the 610B preamp.

[@MusicChannel-rf5zz]

@@homestudioacademy Which would you prefer? The built in preamps or the plugin preamp placed on the console while recording?

[@homestudioacademy]

@@MusicChannel-rf5zz the emulations such as the Neve 1073

[@MusicChannel-rf5zz]

@@homestudioacademy Thanks very much!

[@homestudioacademy]

@@MusicChannel-rf5zz you’re very welcome!

[@alphasupreme7167]

Hey I sometimes have problems with gain staging my vocal preamp on my Apollo sometimes it’s too loud and sometimes to quit do you have to turn the The knob all the way to max ?which is the best way to record?

[@homestudioacademy]

I don’t really ever have any issues setting the gain levels. I try to stay with the meter hitting between -18db to -10db (green or peaking at yellow). When I use the 610B preamp I use the tube all the way up and then use the level knob to control the output level.

[@snickthebossofficial]

Im recording dry vocals from my twin x in (UAD monitor mode) and then adding all my UA plugins after in the daw. Compressors,eqs,etc. Im not that impressed with the sound. Do you recommend recording with some compressors or eq already on it and printing it in the daw?

[@homestudioacademy]

I like monitoring with the plugins but not printing them. I go back in my daw and add the effects because then I can make changes if I need to. If you record them on the way in, there is no way to undo it.

[@theMichaelSlaughter]

Awesome video

[@homestudioacademy]

Thank you so much for your support and for taking the time to leave a comment! 😊

[@future_Victoryofficial]

Hi brother do you mean UAD MONITORING and UAD RECORD Option have different fonctionality ? one Will not give your vocals the plugin's color and send it to your DAW?

[@homestudioacademy]

Right. UAD record means you’ll hear the plugins in real time and they get printed into your DAW. Therefore, you can’t undo anything after the fact. UAD monitoring means you can hear the plugins in your headphones but they don’t get printed. Which means you can then add them in your DAW and make changes afterwards.

[@EarnestLee711]

Question is the Apollo compatible with bandlab or no?

[@homestudioacademy]

I’m not familiar with bandlab but based on their official website, I don’t think so. Here is the compatibility chart from Universal Audios official website: help.uaudio.com/hc/en-us/articles/360050583152-DAW-Compatibility

[@zyanigh1]

Are you able to do paid video setup? I need someone to help me with setting up my vocal chain.

[@homestudioacademy]

I do offer one-on-one coaching calls if that’s what you mean.

[@zyanigh1]

@@homestudioacademy yes that’s what I’m after.

[@homestudioacademy]

@zyanigh1 please email [e-mail] for business inquiries. Thank you! 😊

[@AMVTBC]

Thx again bro 💪🏾💯🙏🏾

[@homestudioacademy]

@@AMVTBC you’re welcome, glad to help 😊

[@AMVTBC]

@@homestudioacademy most definitely

[@adrianemotion3984]

How i can Make The recording in Logic Pro x with UAUDIO that i can hear my Voice in the headphones when iam Recording. You explain how i can Hear the effects

[@homestudioacademy]

When I’m recording, I use the UAD console app to monitor my recording and I mute my track in Logic Pro.

[@Revilo_wav]

so i´m just using the console for monitoring, not for adding it in the DAW?

[@homestudioacademy]

@@Revilo_wav no, the console app allows you to monitor and print the effects to your DAW. Just make sure to select UAD REC mode in the console app and the effects will print.

[@zainmalik455]

Hey, i really like this and is very insightful.. i would love an explanation for the 1073 plugin, im struggling figuring it out. Also, isn't the point of adding effects into the console so that it also records onto the daw? Thus, using UAD Rec.. Or is it okay to add my preamp, eq, compression after i record? Ive been confused whether i need to add the preamp etc, before or after

[@homestudioacademy]

Hey Zain Malik, so there is no 1073 in this chain. I used a 610B preamp, 1176 Compressor and LA2A. The Console App gives you both options (UAD Record and UAD Monitoring). If you want to commit to the sound then choose UAD Rec, if you don’t want to commit and make changes later in your DAW, then choose UAD Monitoring. At the end of the day, it’s up to your preference.

[@zainmalik455]

@@homestudioacademy ohh I see! & I meant if you could make a separate tutorial on the 1073 one day. I've been wanting to use it but it seems so complicated

[@homestudioacademy]

@@zainmalik455 if I buy it in the future, I’ll make a review for sure!

[@alextsagaru]

I see your are using rode nt 1, but when I am trying to use it with Apollo solo it doesn’t have any signal, when I press some buttons it starts to give me very low signal. When I use it with scarlet it works. That means it’s not for or mic issue. Sm7b works well with Apollo What’s the problem it could be ?

[@homestudioacademy]

You need to make sure you click on the 48v switch (also known as phantom power) on the Apollo because the NT1 is a condenser mic and it requires it to turn on. The SM7B is a dynamic mic which does not require phantom power.

[@kiplescrtp2361]

Do these plugins come with the Apollo twin x. ???

[@homestudioacademy]

@kiplescrtp2361 at the time I bought the twin x yes. The included plugins may change based on the model and time of purchase so check universal audios official website but I’m sure most of the ones in this video do

[@superfireness24]

In FL studio, once u put your mic in input and you’re ready to record, you will be ready to hear any UA plugin with monitoring? There’s no complicated type of step?

[@homestudioacademy]

If the UAD console is is under UAD REC mode then yes you’ll hear and get printed. If it’s UAD MON mode, then you’ll hear the plugin but now print.

[@superfireness24]

thank you, would i be able to dm you on insta to ask you other questions please ?@@homestudioacademy

[@lillucid9x]

I got the Apollo Solo Yesterday it is a very good interface in it works great in Pro Tools but whenever I go to KZbin there isn’t no Audio Coming out do you know how I can fix this because I like looking for beats when recording to see if I like them first but I can’t get it to work?

[@homestudioacademy]

Make sure to change your audio/sound preferences on your computer input and output to the Apollo.

[@lillucid9x]

@@homestudioacademy yes I did I got it fixed an hour ago but thanks

[@homestudioacademy]

@@lillucid9x great 👍

[@lillucid9x]

@@homestudioacademy 👍💯💯💯

[@albertsison809]

Do you recommend for me the apollo twins mkII duo core Or apollo twins x And is that ok to buy 2ndhand which 600 euros

[@homestudioacademy]

Hey Albert Sison! To be honest I don’t know what is the difference between the MKII or the X. I know that the X is the newest version of it. But in regards to buying it second hand, I would be careful because you need to make sure that person who owned it will be able to transfer the plugins to your UAD account. Otherwise, you’ll end up without the plugins and will need to either purchase them individually or sign up for the Universal Audio’s Spark Subscription service.

[@albertsison809]

@@homestudioacademy thank you for your quick response Can i ask something The plugins is lifetime right And the plugins still exist until now or any new update

[@homestudioacademy]

@@albertsison809 yes, if you purchase the Apollo Twin it comes with many UAD plugins that you’ll own for life (all the ones I showed in the video). Since I’m not a fan or subscription services, that played a huge factor in my purchasing decision 5 years ago.

[@albertsison809]

@@homestudioacademy thank You for your kindness and information God bless and i already subscribe on your channel

[@homestudioacademy]

@@albertsison809 you’re very welcome! Thank you for the kind words and I truly appreciate your support!

[@hashangunarathne]

Can you make a video series, about using the u.a.d twin.. ⭕How to make a mix after using d.s.p plugging, how to do a mastering,, about those things.. (In the U.A.D console.)I watched a lot of videos. There was no explanation in any of them.

[@homestudioacademy]

This video covers all the effects I use using the Apollo. Here is a tutorial on mastering: MASTER ANY SONG With ONE PLUGIN! kzbin.info/www/bejne/qXfNgoqBqs2nmq8 Here are my tutorials on how to use specific UAD plugins: How To Use The 1176 Compressor On VOCALS! kzbin.info/www/bejne/fKTWYpite6yhjK8 How To Use The LA2A Compressor On VOCALS! kzbin.info/www/bejne/nHa3Yax4l5iGjNU Hope it helps! 😊

[@rivenlikemakar]

I have a question thats hard to explain, but im hoping you can help. Im deciding on a Twin X USB so heres my question: Essentially im curious if theres a way to record a take, (monitor via console with FX) clean into my daw, and then if i decide i want to use that take but WITH the UAD plugins i was monitoring, if I can somehow run it back into console, to then print that take with the UAD chain enabled into my daw, without having to re- record a whole new take. That way I can monitor my vocal while recording (with FX), and then after its in my daw CLEAN with no FX, I can then decide if id want to use the UAD chain, without having to committ to that sound/take before knowing, also preventing me from having to record a whole separate take. Not sure if that makes sense, but if so id appreciate your thoughts. Thanks man!

[@homestudioacademy]

Yes, so just record using the UAD monitoring mode in the console app. This way you’ll be able to hear the plugins but they won’t be printed. Then, just go into your DAW and just add the plugins back with the same exact settings from the console app.

[@rivenlikemakar]

Okay this makes sense. But will i still be using the same UAD plugins? I thought the UAD versions could only be used in console with the Apollo. Thanks for the quick reply bro! Subbed!@@homestudioacademy

[@homestudioacademy]

@@rivenlikemakar no, once you register your Apollo, you’ll get access to the plugins and the ability to use them natively in your DAW. Thank you so much for your support 😊

[@rivenlikemakar]

Oh okay fantastic! Thanks again man, looking forward to your future videos!@@homestudioacademy

[@homestudioacademy]

@@rivenlikemakar you’re very welcome, glad to help 😊

[@mcsupersonic6860]

great video, is the apollo twin X worth buying in basically 2024 ?, im looking for something that’s gonna last me a long time (7 - 10 years)

[@homestudioacademy]

Thank you so much 😊 it depends on your needs. If you want an interface that comes bundled with UAD plugins (which you’ll own for life) and want the ability to run those plugins in real time, with zero latency and without putting strain on your computer, then absolutely! I’ve owned mine for many years now and never looked back. However, if you don’t care about those features and just want a great sounding interface, then the next best deal in my opinion is the Audient id24. Here is my comparison between both: kzbin.info/www/bejne/rnXLhnqMbJdqZ80 Hope it helps!

[@mcsupersonic6860]

i like the plug ins and actually owning them , i just don’t want the technology to run old quickly

[@homestudioacademy]

@@mcsupersonic6860 I completely understand. I’ve owned mine for years and till this day, never felt the need to upgrade or sell it.

[@delayedits1239]

so i already have a solid vocal chain that I use for all my songs. But i need a new interface to pair with my tlm102. I just record vocals. I dont want to use uad stuff, just keep my vocal setup i have in fl studio. Any suggestions for an interface?

[@homestudioacademy]

Thanks for leaving a comment 😊 The next best interface in my opinion is the Audient id24. Here is my review of it: kzbin.info/www/bejne/hIbVhHyBj9ymo6s

[@bobbyxsteevbeats]

Why do you have to turn that 40 volt switch on with a condenser mic?

[@homestudioacademy]

Unlike dynamic mics, Condenser mics require phantom power (also known as 48v switch) in order to turn on. Next week I’ll be posting a video about dynamic vs condenser mics so stay tuned!

[@SmashavelliTV]

You don’t track using 1073 & CL1B?

[@homestudioacademy]

Those are paid plugins, I just use what came included with the Apollo. The Neve 1073 is definitely on my to buy list though!

[@SmashavelliTV]

@@homestudioacademy huh? Are those no longer free? I didn’t have to pay for those when I got mine

[@homestudioacademy]

@@SmashavelliTV the 1073 is not free last time I checked. It did not come included with my Apollo when I bought it 5 years ago. Maybe you got one of those deals that they include extra plugins. LUCKY!

[@gwmanuel2]

hi, what is the purpose in using the UA plugins in console if recording in uad monitor mode if in the end you will be mixing with the Logic Pro tool plugins? my point is that you are not taking any advantage of the UA plugins

[@homestudioacademy]

The point of using UA Monitoring mode is that it gives you the ability to make changes in post. For example: if you use the LA2A and you over compress, it will print that way and you can’t undo that. If you’re confident that what you’re recording will be the final product, then go with UAD Rec, otherwise go with UAD Mon.

[@gwmanuel2]

@@homestudioacademy thanks for the quick respond appreciated! Sorry I am new in the music production world, But I guess my question is, if I want to apply the UA plugins (instead of the Logic Pro plugins) in my vocal final mix after recording in monitoring mode is this possible?? If not I don’t see the advantage in investing in UA plugins if you can’t use the through Logic Pro in post production.

[@homestudioacademy]

@@gwmanuel2 yes can use the UAD plugins in Logic Pro

[@WELCOMETODEADHAUS]

Hey man, I know I’m late to the video, but do these plugins come with the Apollo? Thanks in advance 🙏

[@homestudioacademy]

Yes they do!

[@sickasitgets386]

Is the duo compared to quad really worth the 400-500 jump? I’m gonna be live-streaming using a Shure Sm7b so I’ll need a few plugins to make myself sound good but aside from that I’ll maybe only use a couple other plugins to actually mix/master songs within daw when working on music and not recording for KZbin.

[@homestudioacademy]

I don’t how many plugins the duo can handle compared to the quad but I’m assuming for a simple chain (like a preamp, Compressor and maybe Pultec eq should be enough). With that being said, I would search for comparisons here on KZbin

[@robsauls5302]

Are those plugings free with apollo

[@homestudioacademy]

Yes they are! 😊

[@robsauls5302]

@homestudioacademy one more question when recording vocal...do I use mono or stereo?thanks...and I am subscribed..

[@homestudioacademy]

@@robsauls5302 you would record using a mono track since it’s only one input for your microphone. Thanks for subscribing!😊

[@hacktheworld-d8o]

Can you do a tutorial on Apollo twin and maschine

[@homestudioacademy]

I’m not familiar with maschine

[@Gummytrains]

Hey question. I’m using this with obs to stream and obs is not picking up my mic? Any tip? Anyone

[@homestudioacademy]

I’m not familiar with obs. Try making your input device on your computer to read as Universal Audio Apollo and see if that works.

[@Gummytrains]

@@homestudioacademy I tried it. It won’t read it though obs. Discord reads it. Counter strike 2 reads it. Obs… no go

[@homestudioacademy]

@@Gummytrains sorry to hear that. I never used obs. I would try looking up tutorials here on KZbin for obs.

[@mrvoiceofyuvan]

My system is recording low frequency and I don't know how to fix it.I have tried all the work but it doesn't work, do you have any solution

[@homestudioacademy]

@@mrvoiceofyuvan use a high pass filter around 100hz and see if it helps

[@SLIMEYF]

🔥

[@Verbose_5]

I use FL and when i click uad mon @ 4:39 i cant hear the effects i can only hear them come thru when its on uad rec

[@Verbose_5]

Any solution?

[@homestudioacademy]

@@Verbose_5 that is very weird. I’ve never had that issue in Logic Pro. I would reach out to Universal Audio’s support team to see if they can resolve this issue.

[@jordankahn9298]

I really need help. I have a ton of latency in Logic Pro X. I'm confused by the terms "recording through your DAW" verses "recording through the Apollo." Like, the Apollo is plugged in, how am I NOT recording through it?? Keep in mind: my buffer size is 32, my recording delay is 0, I've played with the sample rate, even have "Low Latency Mode" ON. And still, I just can't record without latency. What do I do??

[@homestudioacademy]

@@jordankahn9298 are you using Universal Audio’s console app along with Logic Pro? You should be adding the effects (if recording) on the Console App and not in Logic Pro. Also, your audio track should be muted in Logic Pro and you should be monitoring the effects in the Console App. Also, something else to try is under your settings, make sure to select “Low Latency Monitoring” in Logic Pro so there is no latency.

[@jordankahn9298]

@@homestudioacademy Hi, yes I had the console app with Logic muted and no signal was coming though. Do I have to use UAD plugins for the signal to come through the app, or can the signal come through without having to create the chain of plugins?

[@homestudioacademy]

@@jordankahn9298 if you’re monitoring through the console app make sure your track isn’t muted. You should be able to hear it even without any plugins.

[@AMVTBC]

THX

[@homestudioacademy]

@@AMVTBC you’re very welcome!

[@SoundConstraints]

"Slow attack" while using the fastest attack compressor on earth haha.

[@homestudioacademy]

Not sure I follow what you’re saying. If you’re referring to the 1176, the settings are backwards than other compressors. Even Grammy Award Winning producer Greg Wells has said in this video: kzbin.info/www/bejne/jma2YaCqgN6do9U

[@SoundConstraints]

@@homestudioacademy Correct, but I was meaning that even the slowest setting is still a blazing fast 800 microseconds lol (0.8MS). Which is insane. Most units FASTEST setting is 1ms

[@homestudioacademy]

@@SoundConstraints yes, the 1176 is very aggressive, that’s why most people use it with the Attack on 1.

[@bandosupreme804]

are these plugins free?

[@homestudioacademy]

They come included with the Apollo Twin. However, if you don’t have an Apollo, you can get access to them by signing up for Universal Audio’s Spark Subscription for $20/month. The benefit with the Apollo is that they come included and you’ll own them for life. In addition, you’ll be able to use the plugins in real time, with zero latency and without putting any strain on your computer. If you sign up for the spark subscription, you’ll use the plugins based on your computer’s processor and not in real time/zero latency.

[@---iy3nk]

Good

[@homestudioacademy]

Thank you

[@rayang9929]

Hey, amazing video, not sure if you will be able to respond, but i have a focusrite scarlette 2i2 3rd gen. I can afford the Apollo twin, is it worth it to upgrade or should i stick with the focusrite?

[@homestudioacademy]

Thank you so much! I actually upgraded from a Focusrite Scarlett to the Apollo Twin X and for me*, there is no going back. At the end of the day it comes down to your personal needs. If you like the results you’re getting and would rather sign up for the Universal Audio Spark subscription service to get access to some of their plugins and pay a monthly fee, then no. However, if you want better preamps, get to own those plugins for life included with the Apollo Twin and have the ability to run the plugins in real time, with zero latency and without relying on your computer’s processing power, then absolutely yes!

[@rayang9929]

@@homestudioacademy thank you for the advice, i appreciate it

[@homestudioacademy]

@@rayang9929 you’re very welcome, glad to help! 😊

[@lionel3294]

Can someone help me find an expader gate for my app console? Of apollo of course

[@homestudioacademy]

Expander gate? I don’t know of any gate plugins that come with the Apollo unfortunately. Maybe someone else knows if Universal Audio makes one plugin like that.