Having taken off my compressor a number of times I left the top bolt off the bracket as it was such a pain to get in with the compressor on the bracket. Just seen on a forum a neat solution. Cut a slot the width of the bolt stud on the bracket leave bolt located in nutsert on frame when replaci g or removing just slid out after loosening bolt. Really good idea.
@darrenwootton20076 жыл бұрын
do you have a link for this?
@andrewcollins8673 жыл бұрын
Brilliant idea ..
@jamesstockbauer12458 жыл бұрын
KZbin has just saved my $1200.00 by not buying expensive parts when my expensive parts were working. Fixed my 2005 LR3 suspension for $5.00.!!! Fuse dummy (me) Check the fuses and relays first !!!
@davidf.8497 Жыл бұрын
The part with the two connectors is the genius part. Thanks!
@finnnielsen4897 Жыл бұрын
Thx guys for a super video, helped a lot.. I have a question I get the fault C1A2064, pressure increase to slow when filling reservoir - result in normal height only, someone has suggested that I need to check the intake pipe/silencer, but I cannot find it on my RRS from 2006, can you help?
@L663 Жыл бұрын
There is an air dryer that is part of the compressor - its worth replacing - google "air dryer range rover sport compressor"
@johngourliemartin26963 жыл бұрын
Bodged job fitting the two pipes at the back, you should have cut the pipe further back and used L shaped air fitting"s" would have made a much neater job.... Good video and thanks for sharing
@L6633 жыл бұрын
Yes i guess the nice way would be to replace all components back to factory spec.
@johngourliemartin26963 жыл бұрын
@@L663 Really no need to do that There are a many of those air type connectors all shapes and sizes but tube must be straight and cut to enter the fitting correctly, my sprayer has uses 100 of those fittings
@johnbowden36968 жыл бұрын
On the difficult top bolt of the mounting frame, an open ended slot would work well , I managed by using a modified extension universal and black electrical tape
@scotty-sb14033 жыл бұрын
Hi is the hitachi the correct air compressor for a 2007 disco? Thanks
@L6633 жыл бұрын
they fitted a couple of types but you can check by looking or by your chassis number
@phattdaddy29742 жыл бұрын
My 2007 was a Hitachi, I have replace it this weekend, wish me success!
@therealmillerman6 жыл бұрын
Do you guys still sell this kit on your website?
@datchetwaterradiosailingcl61426 жыл бұрын
Hi Just repaired compressor and have your fixing kit, watched video on refit a number of times and have a question. The top cover needs to be in place first, do you fit bracket then compressor or do yo partially fit the compressor to the bracket then fit brack to car. That top bolt is very difficult to replace so easy way is to fit bracket first but how to you fix the top bolt to the compressor not much room left any guidance would be appreciated Terry Rensch
@Ella_Roblox_Ella4 жыл бұрын
Where can I order the replacement mount package you guys put together With the clips and bolts and new bracket
It's a pity you don't supply the to short air pipes you put in, before you install the extensions..
@scrappykriss27282 жыл бұрын
Is this compressor the same exact model that is in the LR Range Rover sport ?
@L6632 жыл бұрын
Yes the D3 and Sport shared the same parts - but these did change for different year models.
@Christian76S7 жыл бұрын
but: can you get the top bolt in when the top noise insulation (cover) is already there? you mentioned there's enough space, but while the cover wasn't there!
@kevinallen97837 жыл бұрын
Christian Stenger exactly the same problem I have, if you refit the bracket with the top insulating cover on, it's impossible to tighten that top bolt in. And if you fit the compressor to the bracket before fitting the bracket back onto the chassis, it's then impossible to get at the top bracket bolt...... in fact I can't understand how they actually do this when they build the car in the first place !
@Christian76S7 жыл бұрын
Kevin Allen i reckon with the body off 😂
@kevinallen97837 жыл бұрын
Christian Stenger .... best get my ratchet set and get started then !
@jmingo79808 жыл бұрын
I have the same issue with my air compression lines, where did you get the fittings for 8mm &10mm compression fitting extenders
@L6638 жыл бұрын
+J Mingo Hi - we have been working with a supplier a now have these available in metal.... the pipe and the connector rated at 15 bar - we will add to the website next week.
@samemoran36916 жыл бұрын
powerfulukltd Hi dear I have bought the fitting kit complete from your website! But I haven’t got the little white connectors!, I don’t know where i may find them as thy are necessary. Thank you
@nagiboutros21657 жыл бұрын
I cut the tubing as you did and need the fittings. Where can I purchase these quick connects?
Do you not have to use, pipe inserts at the 10mm and 8mm compressor end and on the connectors.
@L6635 жыл бұрын
Hi - No not really - its just tricky to get the pipe out of the old connectors on the compressor - so easy to just cut them - but then you are short on length !
@Jacksongamma Жыл бұрын
@@L663 Hey, Im a little late. Do you need to use new fittings into the line to connect to the compressor? Or can I just simply attach the bare air line to the new compressor?
@davidharmer35412 жыл бұрын
Where can I buy one of these kits to refit the compressor?
In Range Rover Vogue 2004 how do I replace a rear number plate lamp
@robmt62747 жыл бұрын
Hi. i took my 2008 range rover sport to a shop because loud noise of air under pressure escaping from the air compressor located at the rear wheel. The plastic cover has a light crack but they say that it was enough to brake the line that comes out of the release valve. They say I need to replace the whole compressor. This compressor is new I just changed it 7 months ago after repairing the entire suspension system. Is there a way to fix it. how much longer will it last working. It works fine but makes a loud noise every time it releases the air pressure. I have no failure lights on and is working fine. do you have an email to send you the pics? thank you
@L6637 жыл бұрын
I think you may be able to fix with on of our couplers ? but not sure with the limited details you have given here. www.powerfuluk.com/land-rover-discovery-3-air-suspension-connector-kit.html
@robmt62747 жыл бұрын
powerfulukltd thank you for your reply. I posted the photos of the damaged compressor in this link www.landroverworld.org/threads/suspension-air-compressor-question.28842/page-2#post-173230
@L6637 жыл бұрын
The part that is broken seems to be part of the "air dryer" that is on the side of the compressor. On the Hitachi compressor you can buy the air dryer assembly on its own from Land Rover but not on the AMK. There is one for sale on ebay though www.ebay.co.uk/itm/DISCOVERY-4-RANGE-ROVER-SPORT-AMK-SUSPENSION-COMPRESSOR-PUMP-DRYER-DRIER-/262799219373?hash=item3d300ddaad:g:et0AAOSwUKxYculk
@mybrilliantlife94762 жыл бұрын
I'm waiting for a new pump to arrive, if it works at all for five minutes I'll be bloody amazed, and why in heavens name did they move it from the boot, they could have at least put in underneath, anywhere but jammed between the rail and the back wheel, OMG what a mess
@L6632 жыл бұрын
I feel your pain - if its any conciliation its back in the boot on the new Defender !
@TheKingofHowTos_TKHT7 жыл бұрын
Please provide detailed info on price for Hitachi compressor and the website to purchase those custom bolts/sizes/lock-nuts/lug-nut, etc. My Supercharged is having the same reduced output issue: "Suspension Fault - Normal Height Only" which clears when I shut-off and restart and then comes on again when compressor is filling/pressurizing too slowly... When the fault isn't on, the suspension seems fine although it sometimes rides rough d/t pressure issues... Please help! I need information where to purchase the bolts/fittings etc and I can also purchase a new Hitachi compressor and then have my local mechanic do the re-fitting/install. Please provide more info ASAP as my babe/pride is swaying and riding rough when it hits the slightest of bumps, which is embarrassing to say the least; thanks.
@L6637 жыл бұрын
Hi- they are on our website if you want to take a look www.powerfuluk.com/catalogsearch/result?q=772
@moerons7 жыл бұрын
Consider going to an AMK. The Hitachis are not very reliable, and LR stopped using them. The AMK will need to be programmed though. Good luck.
@leebyrne48383 жыл бұрын
@@moerons can you program this with the iid tool?
@andrewcollins8673 жыл бұрын
Hi can you sell me just the hitachi compressor .. I already bought the kit separate
@darrenwootton20076 жыл бұрын
no there isnt room to get the top bolt into the top bush with the top cover on
@angelicaescobedo66697 жыл бұрын
please come fix mine lol
@charlieprice25107 жыл бұрын
I cut the tubing as you did and need the fittings. Where can I purchase these quick connects?