How to remove A Piller of 2016 TUCSON

How to remove the A Piller of 2016 TUCSON

[@PhilGz]

Very good, thank you 😊

[@nordemoniac]

Just as a note if there’s an airbag. You can cut the top clip, then slide it out. All clips should be replaced anyways if you have an airbag in the A-pillar, so you’re sure the cover won’t come flying in a crash.

[@dylanarnsdorff5947]

I had a hell of a time removing this from my 2016 sonata... between the air bag and sun roof drain tube I couldn't get my fingers in there. So I ended up just breaking it, it was already broken from when they installed the sunroof, so the pillar would never be flush. Now I'm having trouble getting the end out of the car... why do they have to complicate things so much?

[@victorsinclair188]

Thank you so much for sharing this

[@navein001]

You are welcome

[@dsaint94]

Thanks!

[@Taldree]

Excellent, thank you Naveen

[@navein001]

U r welcome Mr. Glen

[@CLMDADE]

Thank you...

[@navein001]

Welcome CKMDADE

[@mpcp27]

Nice one. can you do one for removing the center console and usb panel? I can get most of the center console loose except the part above the gear shift.

[@navein001]

Michael Chong Hi for removing the gear shift part. you just need to pull the gear knob up the whole part comes off

[@thweepz]

How do you do the b pillar trims? I have to replace one and not sure how to get around the seatbelt

[@navein001]

Hi its easier than the a pillar. You have to remove your door beading first then remove your scuff or the bottom cover (where your wire runs to the back) and also you have to do the same at the back door tooand the whole b pillar sits on just 4 clips i guess. Just pry it from the bottom. I will try to post a video this weekend.

[@thweepz]

@@navein001 even if I just do the upper trim?

[@thweepz]

@@navein001 a video would be amazing. Thank you so much. I actually changed my a pillar after watching your video

[@dlauria85]

Thanks. I tried on my Tucson 2018..but I need to pull the pillar too hard so I just dropped it to avoid braking the clips. How did you manage?

[@navein001]

Can you send me a pic of the pillar, also i have mentioned in my video that it is too hard to take out. once you pry it out then its easy to take out. do you have have air bag in the A pillar?

[@mpcp27]

You know i had forgotten that i saw this video...i had a devil of a time getting that clip out..i did it in the end.. But there is an easier way.. On the next end of the clip is held to the trim by a piece of plastic held in place by a screw... If you remove the screw and lift out the plastic holder you should be able to pull up on the trim and slide the clip out.. It will be a bit stiff but should work.

[@lionelhuts875]

Can you clarify what screw you're talking about? When unsnapping the A pillar cover, I don't see any screws.

[@chippadonk]

Roof lining removal please?

[@navein001]

Is ur roof with sunroof?

[@chippadonk]

@@navein001 no sunroof model